| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Steve French <[email protected]>
|
|
Update the USB serial option driver support for Luat Air72*U series
products.
ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4e00 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If#= 2: AT
If#= 3: PPP + AT
If#= 4: Debug
Co-developed-by: Yangyu Chen <[email protected]>
Signed-off-by: Yangyu Chen <[email protected]>
Signed-off-by: Asuna Yang <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
With cat regulator_summary, we found that vqmmc was not shutting
down after the card was pulled.
cat /sys/kernel/debug/regulator/regulator_summary
1.before fix
1)Insert SD card
vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV
71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2)Pull out the SD card
vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV
71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2.after fix
1)Insert SD cardt
vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV
71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2)Pull out the SD card
vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV
71100000.mmc-vqmmc 0 0mA 3500mV 3600mV
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
To address IO performance commit f9e5b33934ce
("mmc: host: Improve I/O read/write performance for GL9763E")
limited LPM negotiation to runtime suspend state.
The problem is that it only flips the switch in the runtime PM
resume/suspend logic.
Disable LPM negotiation in gl9763e_add_host.
This helps in two ways:
1. It was found that the LPM switch stays in the same position after
warm reboot. Having it set in init helps with consistency.
2. Disabling LPM during the first runtime resume leaves us susceptible
to the performance issue in the time window between boot and the
first runtime suspend.
Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: [email protected]
Signed-off-by: Kornel Dulęba <[email protected]>
Reviewed-by: Sven van Ashbrook <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:
devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
19 | [DEVLINK_CMD_PORT_NEW] = "port-new",
| ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)
Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The makefile dependency is trying to include the wrong header:
<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory
The guard also looks wrong.
Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register
is 24 bits (not 20 bits) starting with IPA v5.0. Fix this.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alex Elder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.
It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().
Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush")
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Due to a typo, the code checked the RX checksum feature in the TX path.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Radhey Shyam Pandey <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <[email protected]>
Reported-by: Bogdan Marcynkov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.
Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Ivan Vecera <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Tony Nguyen says:
====================
ice: restore timestamp config after reset
Jake Keller says:
We recently discovered during internal validation that the ice driver has
not been properly restoring Tx timestamp configuration after a device reset,
which resulted in application failures after a device reset.
After some digging, it turned out this problem is two-fold. Since the
introduction of the PTP support the driver has been clobbering the storage
of the current timestamp configuration during reset. Thus after a reset, the
driver will no longer perform Tx or Rx timestamps, and will report
timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued.
In addition, the recently merged auxiliary bus support code missed that
PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices.
Failure to restore this register configuration results in the driver no
longer responding to interrupts from other ports. Depending on the traffic
pattern, this can either result in increased latency responding to
timestamps on the non-owner ports, or it can result in the driver never
reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done
during initialization. Due to this, the Tx timestamp issue persists even if
userspace reconfigures timestamping.
This series fixes both issues, as well as removes a redundant Tx ring field
since we can rely on the skb flag as the primary detector for a Tx timestamp
request.
Note that I don't think this series will directly apply to older stable
releases (even v6.6) as we recently refactored a lot of the PTP code to
support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus
implementation. The principle of patch 1/3 and 3/3 could apply as far back
as the initial PTP support, but I don't think it will apply cleanly as-is.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.
This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.
This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.
Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.
Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:
1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()
2) ice_ptp_restore_timestamp_mode() which calls
ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
issues an immediate TSYN_TX interrupt to ensure that timestamps which
may have occurred during the device reset get processed.
Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.
This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.
With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.
The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.
For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.
If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.
The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.
Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.
This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.
Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.
Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.
In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.
Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.
A following change will fix the reset path to properly restore user
timestamping configuration completely.
This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name. Add the newline.
Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <[email protected]> # 6.4.x
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Raju Rangoju says:
====================
amd-xgbe: fixes to handle corner-cases
This series include bug fixes to amd-xgbe driver.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Raju Rangoju <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.
To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Raju Rangoju <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Raju Rangoju <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.
The relation of phy clock is:
sai_pll_ref_sel
sai_pll
sai_pll_bypass
sai_pll_out
sai_pll_out_div2
earc_phy_cg
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Iuliana Prodan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.
Specifically, commit f0220575e65a ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471f871 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().
Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.
Fixes: bdb7e1922052 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Use the i8042-filter to check if Volume key presses are also reported
via atkbd and if yes then filter out the WMI events to avoid reporting
each key-press twice.
Note depending on in which order the PS/2 data vs the WMI event are
handled the first volume key press may still be reported twice. This is
a compromise versus DMI quirks (unmaintainable) or other more complex
solutions.
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2128536#p2128536
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Change asus_q500a_i8042_filter() into a generic i8042-filter,
using a new filter_i8042_e1_extended_codes flag in the quirks struct
to decide if e1 extended codes should be filtered out or not.
This is a preparation patch for adding support for filtering volume key
events being reported twice through both the PS/2 keyboard and asus-wmi.
Note while modifying the code also drop the unnecessary unlikely()
annotations, this is not in a hot path so those are not necessary.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.
Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.
Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Fix a possible misalignment between page_pool stats and tx xdp_stats
reported in veth_get_ethtool_stats routine.
The issue can be reproduced configuring the veth pair with the
following tx/rx queues:
$ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \
numtxqueues 1 numrxqueues 1
and loading a simple XDP program on v0 that just returns XDP_PASS.
In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1.
Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN
since we always report xdp_stats for all tx queues in ethtool.
Fixes: 4fc418053ec7 ("net: veth: add page_pool stats")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <[email protected]>
|
|
queue than its PF
It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
xen_vcpu_info is a percpu area than needs to be mapped by Xen.
Currently, it could cross a page boundary resulting in Xen being unable
to map it:
[ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164!
[ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Fix the issue by using __alloc_percpu and requesting alignment for the
memory allocation.
Signed-off-by: Stefano Stabellini <[email protected]>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop
Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu")
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:
Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0189 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork <[email protected]>
Signed-off-by: Lech Perczak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Set GENPD_FLAG_ACTIVE_WAKEUP for all RPM power domains so that power
domains necessary for wakeup/"awake path" devices are kept on across
suspend.
This is needed for example for the *_AO ("active-only") variants of the
RPMPDs used by the CPU. Those should maintain their votes also across
system suspend to ensure the CPU can keep running for the whole suspend
process (ending in a firmware call). When the RPM firmware detects that
the CPUs are in a deep idle state it will drop those votes automatically.
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
>From the Linux point of view, the power domains used by the CPU must
stay always-on. This is because we still need the CPU to keep running
until the last instruction, which will typically be a firmware call that
shuts down the CPU cleanly.
At the moment the power domain votes (enable + performance state) are
dropped during system suspend, which means the CPU could potentially
malfunction while entering suspend.
We need to distinguish between two different setups used with
qcom-cpufreq-nvmem:
1. CPR power domain: The backing regulator used by CPR should stay
always-on in Linux; it is typically disabled automatically by
hardware when the CPU enters a deep idle state. However, we
should pause the CPR state machine during system suspend.
2. RPMPD: The power domains used by the CPU should stay always-on
in Linux (also across system suspend). The CPU typically only
uses the *_AO ("active-only") variants of the power domains in
RPMPD. For those, the RPM firmware will automatically drop
the votes internally when the CPU enters a deep idle state.
Make this work correctly by calling device_set_awake_path() on the
virtual genpd devices, so that the votes are maintained across system
suspend. The power domain drivers need to set GENPD_FLAG_ACTIVE_WAKEUP
to opt into staying on during system suspend.
For now we only set this for the RPMPD case. For CPR, not setting it
will ensure the state machine is still paused during system suspend,
while the backing regulator will stay on with "regulator-always-on".
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
The genpd core caches performance state votes from devices that are
runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve
runtime PM performance state handling"). They get applied once the
device becomes active again.
To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
devices that use runtime PM only to control the enable and performance
state for the attached power domain.
However, at the moment nothing ever resumes the virtual devices created
for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
means that performance state votes made during cpufreq scaling get
always cached and never applied to the hardware.
Fix this by enabling the devices after attaching them.
Without this fix performance states votes are silently ignored, and the
CPU/CPR voltage is never adjusted. This has been broken since 5.14 but
for some reason no one noticed this on QCS404 so far.
Fixes: 1cb8339ca225 ("cpufreq: qcom: Add support for qcs404 on nvmem driver")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf
Fixes: 0aa9abd4c212 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar <[email protected]>
|
|
When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP
host code is built-in, it fails to link:
arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default'
The problem is that the compile-time conditionals are inconsistent here,
using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS)
and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING
controlling whether the implementation is actually built.
Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently,
which should help readability and make it less error-prone. Combining
it with the check for the ctrl->opts->tls flag lets the compiler drop
all the TLS code in configurations without this feature, which also
helps runtime behavior in addition to avoiding the link failure.
To make it possible for the compiler to build the dead code, both
the tls_handshake_timeout variable and the TLS specific members
of nvme_tcp_queue need to be moved out of the #ifdef block as well,
but at least the former of these gets optimized out again.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When the NVME target code is built-in but its TCP frontend is a loadable
module, enabling keyring support causes a link failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that
depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from
it inherits the state of the tristate symbol rather than the intended
CONFIG_NVME_TARGET one that contains the actual call.
The same thing is true for CONFIG_KEYS, which itself is required for
NVME_KEYRING.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring
code might not be available, or using it will result in a runtime
failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
Add a check to ensure we only check the keyring if there is a chance
of it being used, which avoids both the runtime and link-time
problems.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
In order to make sure I get CC'd on tracing changes for which my input
would be relevant, add my name as reviewer of the TRACING subsystem.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Since the locking of the parent->d_inode has been moved outside the
creation of the files and directories (as it use to be locked via a
conditional), add a WARN_ON_ONCE() to the case that it's not locked.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The eventfs directory is dynamically created via the meta data supplied by
the existing trace events. All files and directories in eventfs has a
parent. Do not allow NULL to be passed into eventfs_start_creating() as
the parent because that should never happen. Warn if it does.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The both create_file_dentry() and create_dir_dentry() takes a boolean
parameter "lookup", as on lookup the inode_lock should already be taken,
but for dcache_dir_open_wrapper() it is not taken.
There's no reason that the dcache_dir_open_wrapper() can't take the
inode_lock before calling these functions. In fact, it's better if it
does, as the lock can be held throughout both directory and file
creations.
This also simplifies the code, and possibly prevents unexpected race
conditions when the lock is released.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
If memory reclaim happens, it can reclaim file system pages. The file
system pages from eventfs may take the eventfs_mutex on reclaim. This
means that allocation while holding the eventfs_mutex must not call into
filesystem reclaim. A lockdep splat uncovered this.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Andrew Morton <[email protected]>
Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode")
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Mark Rutland <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Noticed on several perf tools cross build test containers:
[perfbuilder@five ~]$ grep FAIL ~/dm.log/summary
19 10.18 debian:experimental-x-mips : FAIL gcc version 12.3.0 (Debian 12.3.0-6)
20 11.21 debian:experimental-x-mips64 : FAIL gcc version 12.3.0 (Debian 12.3.0-6)
21 11.30 debian:experimental-x-mipsel : FAIL gcc version 12.3.0 (Debian 12.3.0-6)
37 12.07 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
42 11.91 ubuntu:18.04-x-riscv64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
44 13.17 ubuntu:18.04-x-sh4 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
45 12.09 ubuntu:18.04-x-sparc64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
[perfbuilder@five ~]$
In file included from util/intel-pt-decoder/intel-pt-pkt-decoder.c:10:
/tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h: In function 'get_unaligned_le16':
/tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:13:29: error: packed attribute causes inefficient alignment for 'x' [-Werror=attributes]
13 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \
| ^
/tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:27:28: note: in expansion of macro '__get_unaligned_t'
27 | return le16_to_cpu(__get_unaligned_t(__le16, p));
| ^~~~~~~~~~~~~~~~~
This comes from the kernel, where the -Wattributes and -Wpacked isn't
used, -Wpacked is already disabled, do it for the attributes as well.
Fixes: a91c987254651443 ("perf tools: Add get_unaligned_leNN()")
Suggested-by: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Linus reported that:
After commit a103f46633fd the kernel stopped compiling for
several ARM32 platforms that I am building with a bare metal
compiler. Bare metal compilers (arm-none-eabi-) don't
define __linux__.
This is because the header <acpi/platform/acenv.h> is now
in the include path for <linux/irq.h>:
CC arch/arm/kernel/irq.o
CC kernel/sysctl.o
CC crypto/api.o
In file included from ../include/acpi/acpi.h:22,
from ../include/linux/fw_table.h:29,
from ../include/linux/acpi.h:18,
from ../include/linux/irqchip.h:14,
from ../arch/arm/kernel/irq.c:25:
../include/acpi/platform/acenv.h:218:2: error: #error Unknown target environment
218 | #error Unknown target environment
| ^~~~~
The issue is caused by the introducing of splitting out the ACPI code to
support the new generic fw_table code.
Rafael suggested [1] moving the fw_table.h include in linux/acpi.h to below
the linux/mutex.h. Remove the two includes in fw_table.h. Replace
linux/fw_table.h include in fw_table.c with linux/acpi.h.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0idWdJq3JSqQWLG5q+b+b=zkEdWR55rGYEoxh7R6N8kFQ@mail.gmail.com/
Fixes: a103f46633fd ("acpi: Move common tables helper functions to common lib")
Closes: https://lore.kernel.org/linux-acpi/[email protected]/
Reported-by: Linus Walleij <[email protected]>
Suggested-by: Rafael J. Wysocki <[email protected]>
Tested-by: Linus Walleij <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Currently the sysreg-defs are written out to the source tree
unconditionally, ignoring the specified output directory. Correct the
build rule to emit the header to the output directory. Opportunistically
reorganize the rules to avoid interleaving with the set of beauty make
rules.
Reported-by: Ian Rogers <[email protected]>
Signed-off-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Ian pointed out that source tarballs are incomplete as of commit
e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to
include path"), since the source files needed from the kernel tree do
not appear in the manifest. Add them.
Reported-by: Ian Rogers <[email protected]>
Fixes: e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path")
Signed-off-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|