| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
into arm/dt
ARM64: DT: HiSilicon ARM64 DT updates for 5.16
- Add SPMI PMIC support for the Hikey970 board
- Correct the sp805 watchdog compatible string to match the document
- Correct the operating-points table name to match the dtschema
* tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: align operating-points table name with dtschema
arm64: dts: hisilicon: fix arm,sp805 compatible string
arm64: dts: hisilicon: Add support for Hikey 970 PMIC
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates:
- Flag the janice SPI display lines properly for the right line
semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
"monitored-battery" as used in the updated bindings, and
provide the right Samsung battery compatibles for the Samsung
phones.
* tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Switch battery nodes to standard
ARM: dts: ux500: Skomer eMMC needs 300 ms power on
ARM: dts: ux500: Fix up SD card pin config
ARM: dts: ux500: Skomer regulator fixes
ARM: dts: ux500: Tag Janice display SPI correct
Link: https://lore.kernel.org/r/CACRpkdYf5GwRvG1Gemk4mE+aw6UnAVTY8OudwsVNPQXThHXu6g@mail.gmail.com
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.16, please pull the following:
- Rafal updates the BCM4908 DTS files to produce fewer warnings by
fixing the UART clock name, moving the reboot syscon node out of the bus
node, and finally updating the NAND controller node names.
* tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: Fix UART clock name
arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
arm64: dts: broadcom: bcm4908: Fix NAND node name
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.16
1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
design for automotive for In-vehicle Infotainments (IVI) and Advanced
Driver-Assistance Systems (ADAS).
This pull request brings very basic support (pinctrl, UART and UFS
storage) with a development SADK (Samsung Automotive Development Kit)
board.
* tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add minimal support for exynosautov9 sadk board
arm64: dts: exynos: add initial support for exynosautov9 SoC
arm64: dts: exynos: add proper comaptible FSYS syscon in Exynos5433
arm64: dts: exynos: align operating-points table name with dtschema in Exynos5433
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.16
Minor cleanups - from undocumented or unused properties, coding style.
* tag 'samsung-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: use spaces instead of tabs around '='
ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 dts updates for v5.16
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.
MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.
The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.
The highlight on SC7180 is the introduction of the just released
"Homestar" device. CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.
The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.
On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result. Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.
reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.
* tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits)
arm64: dts: qcom: sdm630-nile: Correct regulator label name
arm64: dts: qcom: sm6125: Improve indentation of multiline properties
arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon
arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection
arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
arm64: dts: qcom: sc7280: Update Q6V5 MSS node
arm64: dts: qcom: sc7280: Add Q6V5 MSS node
arm64: dts: qcom: sc7280: Add nodes to boot modem
arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes
arm64: dts: qcom: sc7280: Update reserved memory map
arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys
arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen
arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds
arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000
arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts
arm64: dts: qcom: sc7180: Add IMEM and pil info regions
arm64: dts: qcom: pm6150l: Add missing include
arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III
arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.16
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom, add missing devices
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
ARM: dts: qcom: fill secondary compatible for multiple boards
ARM: dts: qcom: apq8064: adjust memory node according to specs
ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
ARM: dts: qcom: Add support for LG G Watch R
dt-bindings: arm: qcom: Document APQ8026 SoC binding
ARM: dts: qcom: Add pm8226 PMIC
ARM: dts: qcom: msm8226: Add more SoC bits
dt-bindings: arm: qcom: Document SDX65 platform and boards
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Biggest change is, that we have now support for a reset controller inside the
mmsys. This goes inhand with changes to the driver, that you will find in the
soc pull request.
Mediatek PCI device tree binding described the root port in a wrong. The IP
actaully implements several root complex with everyone having a single root port.
We need to fix the DT in an incompatible way to describe the HW as it is. This
also fixes a problem that no IRQ bigger then 32 could be handled.
The only public available HW that is affected by this is the BananaPi R64. I'm
not aware that there is a big user base using the upstream kernel. In this
boards PCI is only used for extension cards, so I don't expect any boot problems.
- mt8173: add reset for dsi0 to mmsys
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node
* tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
dt-bindings: display: mediatek: add dsi reset optional property
dt-bindings: mediatek: Add #reset-cells to mmsys system controller
arm64: dts: mediatek: Move reset controller constants into common location
arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
arm64: dts: mt8183: add kukui platform audio node
arm64: dts: mt8183: add audio node
arm64: dts: mediatek: Add mt8192 clock controllers
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung S5Pv210 ARM SoCs.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung Exynos ARM SoCs.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung Exynos ARM64 SoCs.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In the rockchip_thermal.c driver we now get the resets with
a devm_reset_control_array_get() function, so remove
the reset-names property as it is no longer needed.
Although no longer required in rockchip-thermal.yaml
sort tsadc-apb as first item.
Signed-off-by: Johan Jonker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
On the Quartz64 Model A, the I2S1 TDM controller is connected
to the rk817 codec in I2S mode. Enabling it and adding the
necessary simple-sound-card and codec nodes allows for analog
audio output on the PINE64 Quartz64 Model A SBC.
Signed-off-by: Nicolas Frattaroli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[some property sorting]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
This adds the necessary device tree node on rk3566 and rk3568
to enable the I2S1 TDM audio controller.
I2S0 has not been added, as it is connected to HDMI and there is
no way to test that it's working without a functioning video
clock (read: VOP2 driver).
Signed-off-by: Nicolas Frattaroli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Currently all gpio nodenames are sort of identical to there label.
Nodenames should be of a generic type, so change them all.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Currently all gpio nodenames are sort of identical to there label.
Nodenames should be of a generic type, so change them all.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.
This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on Rockchip ARM64 processors.
Signed-off-by: Arnaud Ferraris <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add the core io-domain node for rk3368.
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the compatible for the pmu mfd on rk3368.
Signed-off-by: Heiko Stuebner <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the necessary nodes to enable the spdif output on the
RK3566-Quartz-A board.
Co-developed-by: Peter Geis <[email protected]>
Signed-off-by: Peter Geis <[email protected]>
Signed-off-by: Nicolas Frattaroli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
This adds the spdif node to the rk356x device tree.
Signed-off-by: Peter Geis <[email protected]>
Signed-off-by: Nicolas Frattaroli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
In order to use ultra high speed modes (UHS) on the SD card slot, we
add matching pinctrls and fix the voltage switching for LDO5 of the
PMIC, by providing the SD_VSEL pin as GPIO to the PMIC driver.
Signed-off-by: Frieder Schrempf <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
This board consists of two boards:
the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB).
The functions of each board supported by this update are as follows:
- VRC SoM
- WDT
- GPIO
- SDCard (SPI-MMC mode)
- I2C x1
- VRB board
- VRC SoM
- UART x2
- Ethernet phy
Signed-off-by: Yuji Ishikawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
Add an entry for the Toshiba Visconti TMPV7708 VisROBO VRB board
(tmpv7708-visrobo-vrb) to the board/SoC bindings.
Signed-off-by: Yuji Ishikawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
This clock source is referred by baudrate generators of
SPI and I2C devices.
Signed-off-by: Yuji Ishikawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
Add PCIe node and fixed clock for PCIe in TMPV7708's dtsi,
and tmpv7708-rm-mbrc boards's dts.
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Referring to the note under USBH reset and clocks chapter of RM0436,
"In order to access USBH_OHCI registers it is necessary to activate the USB
clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m).
The point is, when USBPHYC PLL is not enabled, OHCI register access
freezes the resume from STANDBY. It is the case when dual USBH is enabled,
instead of OTG + single USBH.
When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL
is enabled and OHCI register access is OK.
This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH
OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK.
Signed-off-by: Amelie Delaunay <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15.
Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2.
Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2
Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15")
Signed-off-by: Olivier Moysan <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get
lost currently, so fix the IRQ type.
Fixes: 83686162c0eb ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx")
Signed-off-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The
DCMI pins used on this output are defined in the pin state definition
&pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit
02814a41529a55dbfb9fbb2a3728e78e70646ea6). Set these pins as the default
pinctrl of the DCMI peripheral in the board device tree.
The pins are not used for any other purpose, so it seems safe to assume
most users will not need to override (delete) what this patch provides.
status defaults to "disabled", so the peripheral will not be
unnecessarily started. And the users who actually intend to make use of
a camera on the DVP port will have this little part of the configuration
ready.
Signed-off-by: Grzegorz Szymaszek <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.
Signed-off-by: Alexandre Torgue <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
|
|
Add new entry for stm32mp135f-dk board.
Signed-off-by: Alexandre Torgue <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Rob Herring <[email protected]>
|
|
Add initial support of STM32MP13 family. The STM32MP13 SoC diversity is
composed by:
-STM32MP131:
-core: 1*CA7, 17*TIMERS, 5*LPTIMERS, DMA/MDMA/DMAMUX
-storage: 3*SDMCC, 1*QSPI, FMC
-com: USB (OHCI/EHCI, OTG), 5*I2C, 5*SPI/I2S, 8*U(S)ART
-audio: 2*SAI
-network: 1*ETH(GMAC)
-STM32MP133: STM32MP131 + 2*CAN, ETH2(GMAC), ADC1
-STM32MP135: STM32MP133 + DCMIPP, LTDC
A second diversity layer exists for security features:
-STM32MP13xY, "Y" gives information:
-Y = A/D means no cryp IP and no secure boot.
-Y = C/F means cryp IP + secure boot.
This commit adds basic peripheral.
Signed-off-by: Alexandre Torgue <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
|
|
The R40 MBUS compatible was introduced recently but it was never
documented.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are commits that mess up the encoding of 'ö' in Söderlund, add a
correct entry to .mailmap.
Signed-off-by: Niklas Söderlund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <[email protected]>
Reviewed-by: Kuldeep Singh <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Property "postion" is not documented in the mma8452 binding. Remove it
to resolve the error in "make dtbs_check"
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The FPGA is not really a bus but more like an MFD device. Change the
compatible string from "simple-bus" to "simple-mfd". This also fix a
node name issue with simple-bus schema.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Add the #power-domain-cells for power-controller node as required by the
schema.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Add the #dma-cells to align with the dma schema.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Fix the following error from "make dtbs_check"
memory: False schema does not allow ...
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
There is no regulator bus in hardware. So move the regulator nodes out
and remove the regulators simple-bus. This also make the dts align with
the simple-bus schema.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Breakup long values to pass the schema check.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Align the compatible strings with the board binding defined in schema
file.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Break up long values to pass dt-schema checks.
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|