| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The mini C runtime runs before relocations are processed, and so it
cannot rely on statically initialized pointer variables.
Add a check to ensure that such code does not get introduced by
accident, by going over the relocations in each object, identifying the
ones that operate on data sections that are part of the executable
image, and raising an error if any relocations of type R_AARCH64_ABS64
exist. Note that such relocations are permitted in other places (e.g.,
debug sections) and will never occur in compiler generated code sections
when using the small code model, so only check sections that have
SHF_ALLOC set and SHF_EXECINSTR cleared.
To accommodate cases where statically initialized symbol references are
unavoidable, introduce a special case for ELF input data sections that
have ".rodata.prel64" in their names, and in these cases, instead of
rejecting any encountered ABS64 relocations, convert them into PREL64
relocations, which don't require any runtime fixups. Note that the code
in question must still be modified to deal with this, as it needs to
convert the 64-bit signed offsets into absolute addresses before use.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Hook up devicetree probing support. For now let's hope that people
implement PMIIDR properly and we don't need an override property or
match data mechanism.
Reviewed-by: Ilkka Koskinen <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Besar Wicaksono <[email protected]>
Tested-by: Besar Wicaksono <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/836722034302ff62f2df56aaeb0036e71945a5d1.1706718007.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
Add a binding for implementations of the Arm CoreSight Performance
Monitoring Unit Architecture. Not to be confused with CoreSight debug
and trace, the PMU architecture defines a standard MMIO interface for
event counters following a similar design to the CPU PMU architecture,
where the implementation and most of its features are discoverable
through ID registers.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/c62a86ef177bec5c6d12176c605de900e9e40c87.1706718007.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
arm_cspmu_reset_counters() inherently also stops them since it is
writing 0 to PMCR.E, so there should be no need to do that twice.
Also tidy up the reset routine itself for consistency with the start
and stop routines, and to be clear at first glance that it is simply
writing a constant value.
Reviewed-by: Ilkka Koskinen <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/3105815327989f6bb7bb068994d0eb4096b4ef64.1706718007.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
The attribute group array itself is always the same, so there's no
need to allocate it separately. Storing it directly in our instance
data saves memory and gives us one less point of failure.
Reviewed-by: Ilkka Koskinen <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/cf12b803114b0815438833fcb2495f20f2007761.1706718007.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
It's far simpler for implementations to literally override whichever
default ops they want to, by initialising to the default ops first. This
saves all the bother of checking what the impl_init_ops call has or
hasn't touched. Make the same clear distinction for the PMIIDR override
as well, in case we gain more sources for overriding that in future.
Reviewed-by: Ilkka Koskinen <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/dd39718ee4890fd46a8e443c25303e87ae23f422.1706718007.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
This commit provides the build flags for Rust for AArch64. The core Rust
support already in the kernel does the rest. This enables the PAC ret
and BTI options in the Rust build flags to match the options that are
used when building C.
The Rust samples have been tested with this commit.
Signed-off-by: Jamie Cunliffe <[email protected]>
Acked-by: Will Deacon <[email protected]>
Tested-by: Dirk Behme <[email protected]>
Tested-by: Boqun Feng <[email protected]>
Acked-by: Miguel Ojeda <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Tested-by: Fabien Parent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Eventually we want all architectures to be using the target as defined
by rustc. However currently some architectures can't do that and are
using the target.json specification. This puts in place the foundation
to allow the use of the builtin target definition or a target.json
specification.
Signed-off-by: Jamie Cunliffe <[email protected]>
Acked-by: Masahiro Yamada <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: squashed loongarch ifneq fix from WANG Rui]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The debugfs pretty-printer was written for the CMN-600 assumptions of a
maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to
12 and 128 respectively, which can overflow the format strings, mess up
the alignment of the table and hurt overall readability. This table does
prove useful for double-checking that the driver is picking up the
topology of new systems correctly and for verifying user expectations,
so tweak the formatting to stay nice and readable with wider values.
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/1d1517eadd1bac5992fab679c9dc531b381944da.1702484646.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/75dda01b2ad6e17f726830094bd38cb8faab5cbe.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/7be677dfa13d3a7eab6eef0d808ba8a9855d14ae.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/a2587688c54834482d68fe2a44f415a649ad6477.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/055656e474208b0fb583e249530fa211fa3be57c.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/79f48409f663f0184f03d34c6a86359ea3aa1291.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/33a8be0641b9447469fb7f6af0a10fb65efa97a3.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/bd12035ca467d7f4cd5edcfd6febda56600caacd.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/c5b76bf352385d8ef6211ee8c43352c74eee064d.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/abfedc224eca7f4960b7ddfb6daedd47a3699ca5.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/23bfd1a73ce819ffce6137c237608684a3cdfda6.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/1eda5e216afcb0e26a50e9be112d4514ffd0844a.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/20cc24ede88f5e000991dfe6f4cf1222b819e337.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/9ff5a467569dd51b2fc44e11594ad5db7ea15f57.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/8698ca612e17292f8a8bbb2d1c0f6be4b2053da7.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/1cae5f0c4693333c91d28a09388bdb8bfcc25d0b.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/70b581d58cfffdccb9fb3ed17bf3220c00f8033f.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/33dbadf246eb323edd9e09ac744111216c167a55.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/e6dd47f791ddcc4cc6f7a80efcede245528220e6.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <[email protected]>
|
|
Currently, we base the KASLR randomization range on a rough estimate of
the available space in the upper VA region: the lower 1/4th has the
module region and the upper 1/4th has the fixmap, vmemmap and PCI I/O
ranges, and so we pick a random location in the remaining space in the
middle.
Once we enable support for 5-level paging with 4k pages, this no longer
works: the vmemmap region, being dimensioned to cover a 52-bit linear
region, takes up so much space in the upper VA region (the size of which
is based on a 48-bit VA space for compatibility with non-LVA hardware)
that the region above the vmalloc region takes up more than a quarter of
the available space.
So instead of a heuristic, let's derive the randomization range from the
actual boundaries of the vmalloc region.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
The vmemmap array is statically sized based on the maximum supported
size of the virtual address space, but it is located inside the upper VA
region, which is statically sized based on the *minimum* supported size
of the VA space. This doesn't matter much when using 64k pages, which is
the only configuration that currently supports 52-bit virtual
addressing.
However, upcoming LPA2 support will change this picture somewhat, as in
that case, the vmemmap array will take up more than 25% of the upper VA
region when using 4k pages. Given that most of this space is never used
when running on a system that does not support 52-bit virtual
addressing, let's reclaim the unused vmemmap area in that case.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
The placement and size of the vmemmap region in the kernel virtual
address space is currently derived from the base2 order of the size of a
struct page. This makes for nicely aligned constants with lots of
leading 0xf and trailing 0x0 digits, but given that the actual struct
pages are indexed as an ordinary array, this resulting region is
severely overdimensioned when the size of a struct page is just over a
power of 2.
This doesn't matter today, but once we enable 52-bit virtual addressing
for 4k pages configurations, the vmemmap region may take up almost half
of the upper VA region with the current struct page upper bound at 64
bytes. And once we enable KMSAN or other features that push the size of
a struct page over 64 bytes, we will run out of VMALLOC space entirely.
So instead, let's derive the region size from the actual size of a
struct page, and place the entire region 1 GB from the top of the VA
space, where it still doesn't share any lower level translation table
entries with the fixmap.
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
We will soon reclaim the part of the vmemmap region that covers VA space
that is not addressable by the hardware. To avoid confusion, ensure that
the 'vmemmap start' marker points at the start of the region that is
actually being used for the struct page array, rather than the start of
the region we set aside for it at build time.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
Rework the way the address_markers array is populated so that we can
tolerate values that are not compile time constants generally, rather
than keeping track manually of the array indexes in question, and poking
new values into them manually. This will be needed for VMALLOC_END,
which will cease to be a compile time constant after a subsequent patch.
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
Move the fixmap region above the vmemmap region, so that the start of
the vmemmap delineates the end of the region available for vmalloc and
vmap allocations and the randomized placement of the kernel and modules.
In a subsequent patch, we will take advantage of this to reclaim most of
the vmemmap area when running a 52-bit VA capable build with 52-bit
virtual addressing disabled at runtime.
Note that the existing guard region of 256 MiB covers the fixmap and PCI
I/O regions as well, so we can reduce it 8 MiB, which is what we use in
other places too.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
Move the PCI I/O region above the vmemmap region in the kernel's VA
space. This will permit us to reclaim the lower part of the vmemmap
region for vmalloc/vmap allocations when running a 52-bit VA capable
build on a 48-bit VA capable system.
Also, given that PCI_IO_START is derived from VMEMMAP_END, use that
symbolic constant directly in ptdump rather than deriving it from
VMEMMAP_START and VMEMMAP_SIZE, as those definitions will change in
subsequent patches.
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
|
|
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
|
|
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"
* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy driver fixes from Vinod Koul:
- TI null pointer dereference
- missing erdes mux entry in lan966x driver
- Return of error code in renesas driver
- Serdes init sequence and register offsets for IPQ drivers
* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
phy: lan966x: Add missing serdes mux entry
phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and eventfs fixes from Steven Rostedt:
- Fix the return code for ring_buffer_poll_wait()
It was returing a -EINVAL instead of EPOLLERR.
- Zero out the tracefs_inode so that all fields are initialized.
The ti->private could have had stale data, but instead of just
initializing it to NULL, clear out the entire structure when it is
allocated.
- Fix a crash in timerlat
The hrtimer was initialized at read and not open, but is canceled at
close. If the file was opened and never read the close will pass a
NULL pointer to hrtime_cancel().
- Rewrite of eventfs.
Linus wrote a patch series to remove the dentry references in the
eventfs_inode and to use ref counting and more of proper VFS
interfaces to make it work.
- Add warning to put_ei() if ei is not set to free. That means
something is about to free it when it shouldn't.
- Restructure the eventfs_inode to make it more compact, and remove the
unused llist field.
- Remove the fsnotify*() funtions for when the inodes were being
created in the lookup code. It doesn't make sense to notify about
creation just because something is being looked up.
- The inode hard link count was not accurate.
It was being updated when a file was looked up. The inodes of
directories were updating their parent inode hard link count every
time the inode was created. That means if memory reclaim cleaned a
stale directory inode and the inode was lookup up again, it would
increment the parent inode again as well. Al Viro said to just have
all eventfs directories have a hard link count of 1. That tells user
space not to trust it.
* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Keep all directory links at 1
eventfs: Remove fsnotify*() functions from lookup()
eventfs: Restructure eventfs_inode structure to be more condensed
eventfs: Warn if an eventfs_inode is freed without is_freed being set
tracing/timerlat: Move hrtimer_init to timerlat_fd open()
eventfs: Get rid of dentry pointers without refcounts
eventfs: Clean up dentry ops and add revalidate function
eventfs: Remove unused d_parent pointer field
tracefs: dentry lookup crapectomy
tracefs: Avoid using the ei->dentry pointer unnecessarily
eventfs: Initialize the tracefs inode properly
tracefs: Zero out the tracefs_inode when allocating it
ring-buffer: Clean ring_buffer_poll_wait() error return
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 revert from Andreas Gruenbacher:
"It turns out that the commit to use GL_NOBLOCK flag for non-blocking
lookups has several issues, and not all of them have a simple fix"
* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
|
|
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
|