| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in
sched_clock_{local,remote}. x86 cmpxchg returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Signed-off-by: Uros Bizjak <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
A panic was reported in the init process on AMD:
Run /sbin/init as init process
init[1]: segfault at f7fd5ca0 ip 00000000f7f5bbc7 sp 00000000ffa06aa0 error 7 in libc.so[f7f51000+4e000]
Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 1 PID: 1 Comm: init Tainted: G W 5.18.0-rc7-next-20220519 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
panic+0x10f/0x28d
do_exit.cold+0x18/0x48
do_group_exit+0x2e/0xb0
get_signal+0xb6d/0xb80
arch_do_signal_or_restart+0x31/0x760
? show_opcodes.cold+0x1c/0x21
? force_sig_fault+0x49/0x70
exit_to_user_mode_prepare+0x131/0x1a0
irqentry_exit_to_user_mode+0x5/0x30
asm_exc_page_fault+0x27/0x30
RIP: 0023:0xf7f5bbc7
Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00
RSP: 002b:00000000ffa06aa0 EFLAGS: 00000217
RAX: 00000000f7fd5ca0 RBX: 000000000000000c RCX: 0000000000001000
RDX: 0000000000000001 RSI: 00000000f7fd5b60 RDI: 00000000f7fd5b60
RBP: 00000000f7fd1c1c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The task's CX register got corrupted by commit 8c42819b61b8 ("x86/entry:
Use PUSH_AND_CLEAR_REGS for compat"), which overlooked the fact that
compat SYSCALL apparently stores the user's CX value in BP.
Before that commit, CX was saved from its stashed value in BP:
pushq %rbp /* pt_regs->cx (stashed in bp) */
But then it got changed to:
pushq %rcx /* pt_regs->cx */
So the wrong value got saved and later restored back to the user. Fix
it by pushing the correct value again (BP) for regs->cx.
Fixes: 8c42819b61b8 ("x86/entry: Use PUSH_AND_CLEAR_REGS for compat")
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Link: https://lkml.kernel.org/r/b5a26592c9dd60bbacdf97974a7433fd802a5593.1652985970.git.jpoimboe@kernel.org
|
|
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Fixes dtbs_check warnings like:
dma@3000000: $nodename:0: 'dma@3000000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: c5ab54e9945b ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Currently 'make C=1 fs/io_uring.o' generates sparse warning:
CHECK fs/io_uring.c
fs/io_uring.c: note: in included file (through
include/trace/trace_events.h, include/trace/define_trace.h, i
nclude/trace/events/io_uring.h):
./include/trace/events/io_uring.h:488:1:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] op_flags
got restricted __kernel_rwf_t const [usertype] rw_flags
This happen on cast of sqe->rw_flags which is defined as __kernel_rwf_t,
this type is bitwise and requires __force attribute for any casts.
However rw_flags is a member of the union, and its access can be safely
replaced by using of its neighbours, so let's use poll32_events to fix
the sparse warning.
Signed-off-by: Vasily Averin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If genpd has parsed the domain-idle-states from DT, it's reasonable to
believe that the parsed data should be correct for the HW in question.
Based upon this, it seem superfluous to let genpd measure the corresponding
power-on/off latencies for these states.
Therefore, let's improve the behaviour in genpd by avoiding the
measurements for the domain-idle-states that have been parsed from DT.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The measurements of the power-on|off latencies in genpd for a PM domain are
superfluous, unless the corresponding genpd has a governor assigned to it,
which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If a genpd doesn't have an associated governor assigned, several variables
in the struct generic_pm_domain becomes superfluous.
Rather than wasting memory in allocated genpds, let's move the variables
from the struct generic_pm_domain into a new separate struct. In this way,
we can instead dynamically decide when we need to allocate the
corresponding data for it.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
To improve the readability of the code, let's move the parts that deals
with allocation/freeing of data, into two separate functions.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In the genpd governor we walk the list of child-domains to take into
account their next_wakeup. If the child-domain itself, doesn't have a
governor assigned to it, we can end up using the next_wakeup value before
it has been properly initialized. To prevent a possible incorrect behaviour
in the governor, let's initialize next_wakeup to KTIME_MAX.
Fixes: c79aa080fb0f ("PM: domains: use device's next wakeup to determine domain idle state")
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When an IRQ safe device is attached to a non-IRQ safe PM domain, genpd
needs to prevent the PM domain from being powered off. However, genpd still
allows the device to be runtime suspended/resumed, hence it's also
reasonable to think that a governor may be used to validate the QoS latency
constraints.
Unfortunately, genpd_runtime_resume() treats the configuration above, as a
reason to skip measuring the QoS resume latency for the device. This is a
legacy behaviour that was earlier correct, but should have been changed
when genpd was transformed into its current behaviour around how it manages
IRQ safe devices. Luckily, there's no report about problems, so let's just
fixup the behaviour.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The QoS latency measurements for devices in genpd_runtime_suspend|resume()
are superfluous, unless the corresponding genpd has a governor assigned to
it, which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If the corresponding genpd for the device doesn't use a governor, the
variable next_wakeup within the struct generic_pm_domain_data becomes
superfluous.
To avoid wasting memory, let's move it into the struct gpd_timing_data,
which is already being allocated based upon if there is governor assigned.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If a genpd doesn't have an associated governor assigned, there's really no
point to allocate the per device gpd_timing_data, as the data isn't being
used by a governor anyway.
To avoid wasting memory, let's therefore convert the corresponding td
variable in the struct generic_pm_domain_data into a pointer and manage the
allocation of its data dynamically.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In irq_safe_dev_in_sleep_domain() we correctly skip the dev_warn_once() if
the corresponding genpd for the device, has the GENPD_FLAG_ALWAYS_ON flag
being set. For the same reason (the genpd is always-on in runtime), let's
also skip the warning if the GENPD_FLAG_RPM_ALWAYS_ON flag is set for the
genpd.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The name "irq_safe_dev_in_no_sleep_domain", doesn't really match the
conditions that are being checked in the function, hence the code becomes a
bit confusing to read.
Let's clarify this by renaming it into "irq_safe_dev_in_sleep_domain" and
let's also take the opportunity to clarify a corresponding comment in the
code.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Back in the days when genpd supported intermediate power states of its
devices, it made sense to check the PM_QOS_FLAG_NO_POWER_OFF in
genpd_power_off(). This because the attached devices were all being put
into low power state together when the PM domain was also being powered
off.
At this point, the flag PM_QOS_FLAG_NO_POWER_OFF is better checked by
drivers from their ->runtime_suspend() callbacks, like in the
usb_port_runtime_suspend(), for example. Or perhaps an even better option
is to set the QoS resume latency constraint for the device to zero, which
informs the runtime PM core to prevent the device from being runtime
suspended.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Due to recent changes, the always-on governor is always used with a genpd
that has the GENPD_FLAG_RPM_ALWAYS_ON flag being set. This means genpd,
doesn't invoke the governor's ->power_down_ok() callback, which makes the
code in the governor redundant, so let's drop it.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Rather than relying on the genpd provider to set the corresponding flag,
GENPD_FLAG_RPM_ALWAYS_ON, when the always-on governor is being used, let's
add it in pm_genpd_init(). In this way, it starts to benefits all genpd
providers immediately.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The _DSM evaluation warning in its current form is not very helpful, as
it lacks any specific information:
ACPI: \: failed to evaluate _DSM (0x1001)
Thus, include the UUID of the missing _DSM:
ACPI: \: failed to evaluate _DSM bf0212f2-... (0x1001)
Signed-off-by: Michael Niewöhner <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
There is no need to store the result of the multiply back to variable value
after the multiplication. The store is redundant, replace *= with just *.
Cleans up clang scan build warning:
warning: Although the value stored to 'value' is used in the enclosing
expression, the value is never actually read from 'value'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The driver is using functions from a compilation unit which is enabled
by CONFIG_CPU_SUP_INTEL. Add that dependency to Kconfig explicitly
otherwise:
drivers/platform/x86/intel/ifs/load.o: in function `ifs_load_firmware':
load.c:(.text+0x3b8): undefined reference to `intel_cpu_collect_info'
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The communication mean of the _CPC desired performance can be
PCC, System Memory, System IO, or Functional Fixed Hardware (FFH).
PCC, SystemMemory and SystemIo address spaces are available from any
CPU. Thus, dvfs_possible_from_any_cpu should be enabled in such case.
For FFH, let the FFH implementation do smp_call_function_*() calls.
Signed-off-by: Pierre Gondois <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The communication mean of the _CPC desired performance can be
PCC, System Memory, System IO, or Functional Fixed Hardware.
commit b7898fda5bc7 ("cpufreq: Support for fast frequency switching")
fast_switching is 'for switching CPU frequencies from interrupt
context'.
Writes to SystemMemory and SystemIo are fast and suitable this.
This is not the case for PCC and might not be the case for FFH.
Enable fast_switching for the cppc_cpufreq driver in above cases.
Add cppc_allow_fast_switch() to check the desired performance
register address space and set fast_switching accordingly.
Signed-off-by: Pierre Gondois <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The transition_delay_us (struct cpufreq_policy) is currently defined
as:
Preferred average time interval between consecutive invocations of
the driver to set the frequency for this policy. To be set by the
scaling driver (0, which is the default, means no preference).
The transition_latency represents the amount of time necessary for a
CPU to change its frequency.
A PCCT table advertises mutliple values:
- pcc_nominal: Expected latency to process a command, in microseconds
- pcc_mpar: The maximum number of periodic requests that the subspace
channel can support, reported in commands per minute. 0 indicates no
limitation.
- pcc_mrtt: The minimum amount of time that OSPM must wait after the
completion of a command before issuing the next command,
in microseconds.
cppc_get_transition_latency() allows to get the max of them.
commit d4f3388afd48 ("cpufreq / CPPC: Set platform specific
transition_delay_us") allows to select transition_delay_us based on
the platform, and fallbacks to cppc_get_transition_latency()
otherwise.
If _CPC objects are not using PCC channels (no PPCT table), the
transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long
periods between frequency updates (~4s).
If the desired_reg, where performance requests are written, is in
SystemMemory or SystemIo ACPI address space, there is no delay
in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to
transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).
This patch also adds two macros to check the address spaces.
Signed-off-by: Pierre Gondois <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The _OSC method allows the OS and firmware to communicate about
supported features/capabitlities. It also allows the OS to take
control of some features.
In ACPI 6.4, s6.2.11.2 Platform-Wide OSPM Capabilities, the CPPC
(resp. v2) bit should be set by the OS if it 'supports controlling
processor performance via the interfaces described in the _CPC
object'.
The OS supports CPPC and parses the _CPC object only if
CONFIG_ACPI_CPPC_LIB is set. Replace the x86 specific
boot_cpu_has(X86_FEATURE_HWP) dynamic check with an arch
generic CONFIG_ACPI_CPPC_LIB build-time check.
Note:
CONFIG_X86_INTEL_PSTATE selects CONFIG_ACPI_CPPC_LIB.
Signed-off-by: Pierre Gondois <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
ACPI 6.2 Section 6.2.11.2 'Platform-Wide OSPM Capabilities':
Starting with ACPI Specification 6.2, all _CPC registers can be in
PCC, System Memory, System IO, or Functional Fixed Hardware address
spaces. OSPM support for this more flexible register space scheme is
indicated by the “Flexible Address Space for CPPC Registers” _OSC bit
Otherwise (cf ACPI 6.1, s8.4.7.1.1.X), _CPC registers must be in:
- PCC or Functional Fixed Hardware address space if defined
- SystemMemory address space (NULL register) if not defined
Add the corresponding _OSC bit and check it when parsing _CPC objects.
Signed-off-by: Pierre Gondois <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Module removal fails because cht_int33fe_typec_remove()
tries to access driver data that does not exist. Fixing by
assigning the data at the end of probe.
Fixes: 915623a80b5a ("platform/x86: intel_cht_int33fe: Switch to DMI modalias based loading")
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Previously, during suspend, intel_pch_thermal driver logs for every
cooling iteration, about the current PCH temperature and number of cooling
iterations that have been tried, like below
[ 100.955526] intel_pch_thermal 0000:00:14.2: CPU-PCH current temp [53C] higher than the threshold temp [50C], sleep 1 times for 100 ms duration
[ 101.064156] intel_pch_thermal 0000:00:14.2: CPU-PCH current temp [53C] higher than the threshold temp [50C], sleep 2 times for 100 ms duration
After changing the default delay_cnt to 600, in practice, it is common to
see tens of the above messages if the system is suspended when PCH
overheats. Thus, change this log message from dev_warn to dev_dbg because
it is only useful when we want to check the temperature trend.
At the same time, there is always a one-line message given by the driver
with the patch applied, with below four possibilities.
1. PCH is cool, no cooling delay needed
[ 1791.902853] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [48C]
2. PCH overheats and becomes cool after the cooling delays
[ 1475.511617] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C] after 30700 ms delay
3. PCH still overheats after the overall cooling timeout
[ 2250.157487] intel_pch_thermal 0000:00:12.0: CPU-PCH is hot [60C] after 60000 ms delay. S0ix might fail
4. PCH aborts cooling because of wakeup event detected during the delay
[ 1933.639509] intel_pch_thermal 0000:00:12.0: Wakeup event detected, abort cooling
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Sumeet Pawnikar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit ef63b043ac86 ("thermal: intel: pch: fix S0ix failure due to PCH
temperature above threshold") introduces delay loop mechanism that allows
PCH temperature to go down below threshold during suspend so it won't
block S0ix. And the default overall delay timeout is 1 second.
However, in practice, we found that the time it takes to cool the PCH down
below threshold highly depends on the initial PCH temperature when the
delay starts, as well as the ambient temperature.
And in some cases, the 1 second delay is not sufficient. As a result, the
system stays in a shallower power state like PCx instead of S0ix, and
drains the battery power, without user' notice.
To make sure S0ix is not blocked by the PCH overheating, we
1. expand the default overall timeout to 60 seconds.
2. make sure the temperature is below threshold rather than equal to it.
At the same time, as the cooling delay can be much longer and many wakeup
events (ACPI Power Button press, USB mouse move, etc) becomes valid in the
suspend_noirq phase, add detection of wakeup event so that the driver
does not delay blindly when the system suspend is likely to abort soon.
This patch may introduce longer suspend time, but only in the cases when
the system overheats and Linux used to enter a shallower S2idle state,
say, PCx instead of S0ix.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Sumeet Pawnikar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Move the PCH Thermal driver suspend callback to suspend_noirq to do
cooling while the system is more quiescent.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Sumeet Pawnikar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
intel_pch_thermal driver needs a long delay to cool itself (60 seconds
in maximum) during suspend. When a wakeup event occures during the
delay, it is better for the intel_pch_thermal driver to detect this and
quit cooling because the suspend is likely to abort anyway.
Thus expose pm_wakeup_pending to modules so that intel_pch_thermal
driver can be aware of the wakeup events.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Sumeet Pawnikar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
intel_hid_dsm_fn_mask is a bit mask containing one bit for each function
index. Fix the function index check in intel_hid_evaluate_method
accordingly, which was missed in commit 97ab4516205e ("platform/x86:
intel-hid: fix _DSM function index handling").
Fixes: 97ab4516205e ("platform/x86: intel-hid: fix _DSM function index handling")
Cc: [email protected]
Signed-off-by: Michael Niewöhner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
The intent is to use a genpd governor when there are some states that needs
to be managed. Although, the current code ends up to never assign a
governor, let's fix this.
Fixes: 6abf32f1d9c50 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
While factoring out the PM domain related code from PSCI domain driver into
a set of library functions, a regression when initializing the genpds got
introduced. More precisely, we fail to assign a genpd governor, so let's
fix this.
Fixes: 9d976d6721df ("cpuidle: Factor-out power domain related code from PSCI domain driver")
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Each devfreq governor specifies the supported governor event
such as GOV_START and GOV_STOP. When not-supported event is required,
just return non-error. But, commit ce9a0d88d97a ("PM / devfreq: Add
cpu based scaling support to passive governor") returned the error
value. So that return non-error value when not-supported event is required.
Fixes: ce9a0d88d97a ("PM / devfreq: Add cpu based scaling support to passive governor")
Reported-by: Marek Szyprowski <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control material for 5.19-rc1 from Daniel Lezcano:
- Add the new k3 j72xx bangdap driver and the corresponding bindings (Keerthy)
- Fix the missing of_node_put() in the SC iMX driver at probe timer (Miaoqian Lin)
- Fix memory leak in __thermal_cooling_device_register() when device_register()
fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang)
- Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support
for QCom tsens driver (Bjorn Andersson)
- Fix OTP Calibration Register values conforming to the documentation on RZ/G2L
and bindings documentation for RZ/G2UL (Biju Das)
- Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe)
- Remove unneeded semi colon in libthermal and tools thermal as reported by
cocci (Jiapeng Chong)
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform
(Zheng Yongjun)
- Add thermal library and thermal tools to encapsulate the netlink into event
based callbacks (Daniel Lezcano)
- Add change mode ops for the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi)
- Fix non negative value support by preventing the value to be clamp to zero
(Stefan Wahren)
- Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry
Baryshkov)
- Add hwmon support for K3 driver (Massimiliano Minella)
- Refactor and add multiple generations support for QCom ADC driver (Jishnu
Prakash)
- Use platform_get_irq_optional() to get the interrupt on RCar driver and
document Document RZ/V2L bindings (Lad Prabhakar)
* tag 'thermal-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (28 commits)
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
tools/lib/thermal: Add a thermal library
thermal/drivers/thermal_of: Add change_mode ops support for thermal_of sensor
thermal/drivers/bcm2711: Don't clamp temperature at zero
thermal/drivers/tsens: Add compat string for the qcom,msm8960
...
|
|
Follow the best practice for allocating a variable-sized structure.
Signed-off-by: Zhang Jianhua <[email protected]>
[ebiggers: adjusted commit message]
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"We had two big outstanding issues after v5.18-rc6:
a) 32-bit kernels on 64-bit machines (e.g. on a C3700 which is able
to run 32- and 64-bit kernels) failed early in userspace.
b) 64-bit kernels on PA8800/PA8900 CPUs (e.g. in a C8000) showed
random userspace segfaults. We assumed that those problems were
caused by the tmpalias flushes.
Dave did a lot of testing and reorganization of the current flush code
and fixed the 32-bit cache flushing. For PA8800/PA8900 CPUs he
switched the code to flush using the virtual address of user and
kernel pages instead of using tmpalias flushes. The tmpalias flushes
don't seem to work reliable on such CPUs.
We tested the patches on a wide range machines (715/64, B160L, C3000,
C3700, C8000, rp3440) and they have been in for-next without any
conflicts.
Summary:
- Rewrite the cache flush code for PA8800/PA8900 CPUs to flush using
the virtual address of user and kernel pages instead of using
tmpalias flushes. Testing showed, that tmpalias flushes don't work
reliably on PA8800/PA8900 CPUs
- Fix flush code to allow 32-bit kernels to run on 64-bit capable
machines, e.g. a 32-bit kernel on C3700 machines"
* tag 'for-5.18/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix patch code locking and flushing
parisc: Rewrite cache flush code for PA8800/PA8900
parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()
|
|
Pull ARM fixes from Russell King:
"Two further fixes for Spectre-BHB from Ard for Cortex A15 and to use
the wide branch instruction for Thumb2"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
ARM: 9196/1: spectre-bhb: enable for Cortex-A15
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an altmode in the Ocelot driver
- Fix the IES control pins in the Mediatek MT8365 driver
- Sunxi (AMLogic) driver:
- Fix the UART2 function pin assignments
- Fix the signal name of the PA2 SPI pin
* tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin
pinctrl: sunxi: fix f1c100s uart2 function
pinctrl: mediatek: mt8365: fix IES control pins
pinctrl: ocelot: Fix for lan966x alt mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change to address
a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart
Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in
vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600"
* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
ptp: ocp: change sysfs attr group handling
selftests: forwarding: fix missing backslash
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
net: ftgmac100: Disable hardware checksum on AST2600
igb: skip phy status check where unavailable
nfc: pn533: Fix buggy cleanup order
mptcp: Do TCP fallback on early DSS checksum failure
mptcp: fix checksum byte order
net: af_key: check encryption module availability consistency
net: af_key: add check for pfkey_broadcast in function pfkey_process
net/mlx5: Drain fw_reset when removing device
net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
net/mlx5e: CT: Fix support for GRE tuples
net/mlx5e: Remove HW-GRO from reported features
net/mlx5e: Properly block HW GRO when XDP is enabled
net/mlx5e: Properly block LRO when XDP is enabled
net/mlx5e: Block rx-gro-hw feature in switchdev mode
...
|
|
There are currently two separate batched entropy implementations, for
u32 and u64, with nearly identical code, with the goal of avoiding
unaligned memory accesses and letting the buffers be used more
efficiently. Having to maintain these two functions independently is a
bit of a hassle though, considering that they always need to be kept in
sync.
This commit factors them out into a type-generic macro, so that the
expansion produces the same code as before, such that diffing the
assembly shows no differences. This will also make it easier in the
future to add u16 and u8 batches.
This was initially tested using an always_inline function and letting
gcc constant fold the type size in, but the code gen was less efficient,
and in general it was more verbose and harder to follow. So this patch
goes with the boring macro solution, similar to what's already done for
the _wait functions in random.h.
Cc: Dominik Brodowski <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
randomize_page is an mm function. It is documented like one. It contains
the history of one. It has the naming convention of one. It looks
just like another very similar function in mm, randomize_stack_top().
And it has always been maintained and updated by mm people. There is no
need for it to be in random.c. In the "which shape does not look like
the other ones" test, pointing to randomize_page() is correct.
So move randomize_page() into mm/util.c, right next to the similar
randomize_stack_top() function.
This commit contains no actual code changes.
Cc: Andrew Morton <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
The register_random_ready_notifier() notifier is somewhat complicated,
and was already recently rewritten to use notifier blocks. It is only
used now by one consumer in the kernel, vsprintf.c, for which the async
mechanism is really overly complex for what it actually needs. This
commit removes register_random_ready_notifier() and unregister_random_
ready_notifier(), because it just adds complication with little utility,
and changes vsprintf.c to just check on `!rng_is_initialized() &&
!rng_has_arch_random()`, which will eventually be true. Performance-
wise, that code was already using a static branch, so there's basically
no overhead at all to this change.
Cc: Steven Rostedt <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Acked-by: Petr Mladek <[email protected]> # for vsprintf.c
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
The RNG incorporates RDRAND into its state at boot and every time it
reseeds, so there's no reason for callers to use it directly. The
hashing that the RNG does on it is preferable to using the bytes raw.
The only current use case of get_random_bytes_arch() is vsprintf's
siphash key for pointer hashing, which uses it to initialize the pointer
secret earlier than usual if RDRAND is available. In order to replace
this narrow use case, just expose whether RDRAND is mixed into the RNG,
with a new function called rng_has_arch_random(). With that taken care
of, there are no users of get_random_bytes_arch() left, so it can be
removed.
Later, if trust_cpu gets turned on by default (as most distros are
doing), this one use of rng_has_arch_random() can probably go away as
well.
Cc: Steven Rostedt <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Acked-by: Petr Mladek <[email protected]> # for vsprintf.c
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Much of random.c is devoted to initializing the rng and accounting for
when a sufficient amount of entropy has been added. In a perfect world,
this would all happen during init, and so we could mark these functions
as __init. But in reality, this isn't the case: sometimes the rng only
finishes initializing some seconds after system init is finished.
For this reason, at the moment, a whole host of functions that are only
used relatively close to system init and then never again are intermixed
with functions that are used in hot code all the time. This creates more
cache misses than necessary.
In order to pack the hot code closer together, this commit moves the
initialization functions that can't be marked as __init into
.text.unlikely by way of the __cold attribute.
Of particular note is moving credit_init_bits() into a macro wrapper
that inlines the crng_ready() static branch check. This avoids a
function call to a nop+ret, and most notably prevents extra entropy
arithmetic from being computed in mix_interrupt_randomness().
Reviewed-by: Dominik Brodowski <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
The current code was a mix of "nbytes", "count", "size", "buffer", "in",
and so forth. Instead, let's clean this up by naming input parameters
"buf" (or "ubuf") and "len", so that you always understand that you're
reading this variety of function argument.
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Before these were returning signed values, but the API is intended to be
used with unsigned values.
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Accoriding to the kernel style guide, having `extern` on functions in
headers is old school and deprecated, and doesn't add anything. So remove
them from random.h, and tidy up the file a little bit too.
Signed-off-by: Jason A. Donenfeld <[email protected]>
|