| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"This fixes many fall-through warnings when building with Clang and
-Wimplicit-fallthrough, and also enables -Wimplicit-fallthrough for
Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough, we also want to avoid having
more /* fall through */ comments being introduced. Contrary to GCC,
Clang doesn't recognize any comments as implicit fall-through markings
when the -Wimplicit-fallthrough option is enabled.
So, in order to avoid having more comments being introduced, we use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used as
a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning, and
there might be a couple more out there when building some
architectures with certain configurations. However, with the recent
fixes I think we are in good shape and it is now possible to enable
the warning for Clang"
* tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
Makefile: Enable -Wimplicit-fallthrough for Clang
powerpc/smp: Fix fall-through warning for Clang
dmaengine: mpc512x: Fix fall-through warning for Clang
usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang
powerpc/powernv: Fix fall-through warning for Clang
MIPS: Fix unreachable code issue
MIPS: Fix fall-through warnings for Clang
ASoC: Mediatek: MT8183: Fix fall-through warning for Clang
power: supply: Fix fall-through warnings for Clang
dmaengine: ti: k3-udma: Fix fall-through warning for Clang
s390: Fix fall-through warnings for Clang
dmaengine: ipu: Fix fall-through warning for Clang
iommu/arm-smmu-v3: Fix fall-through warning for Clang
mmc: jz4740: Fix fall-through warning for Clang
PCI: Fix fall-through warning for Clang
scsi: libsas: Fix fall-through warning for Clang
video: fbdev: Fix fall-through warning for Clang
math-emu: Fix fall-through warning
cpufreq: Fix fall-through warning for Clang
drm/msm: Fix fall-through warning in msm_gem_new_impl()
...
|
|
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mm (kasan, pagealloc, rmap,
hmm, and hugetlb), and hfs"
* emailed patches from Andrew Morton <[email protected]>:
mm/hugetlb: fix refs calculation from unaligned @vaddr
hfs: add lock nesting notation to hfs_find_init
hfs: fix high memory mapping in hfs_bnode_read
hfs: add missing clean-up in hfs_fill_super
lib/test_hmm: remove set but unused page variable
mm: fix the try_to_unmap prototype for !CONFIG_MMU
mm/page_alloc: further fix __alloc_pages_bulk() return value
mm/page_alloc: correct return value when failing at preparing
mm/page_alloc: avoid page allocator recursion with pagesets.lock held
Revert "mm/page_alloc: make should_fail_alloc_page() static"
kasan: fix build by including kernel.h
kasan: add memzero init for unaligned size at DEBUG
mm: move helper to check slub_debug_enabled
|
|
My previous patch had a typo/thinko which prevents this driver
from being enabled: change X64_64 to X86_64.
Fixes: 0a9ece9ba154 ("EDAC/igen6: fix core dependency")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Qiuxu Zhuo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: [email protected]
Cc: bowsingbetee <[email protected]>
Cc: [email protected]
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
- Allow again loading KVM on 32-bit non-PAE builds
- Fixes for host SMIs on AMD
- Fixes for guest SMIs on AMD
- Fixes for selftests on s390 and ARM
- Fix memory leak
- Enforce no-instrumentation area on vmentry when hardware breakpoints
are in use.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: selftests: smm_test: Test SMM enter from L2
KVM: nSVM: Restore nested control upon leaving SMM
KVM: nSVM: Fix L1 state corruption upon return from SMM
KVM: nSVM: Introduce svm_copy_vmrun_state()
KVM: nSVM: Check that VM_HSAVE_PA MSR was set before VMRUN
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities
KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails
KVM: SVM: add module param to control the #SMI interception
KVM: SVM: remove INIT intercept handler
KVM: SVM: #SMI interception must not skip the instruction
KVM: VMX: Remove vmx_msr_index from vmx.h
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
KVM: selftests: Address extra memslot parameters in vm_vaddr_alloc
kvm: debugfs: fix memory leak in kvm_create_vm_debugfs
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Revert a patch which caused boot failures with QCOM IOMMU
- Two fixes for Intel VT-d context table handling
- Physical address decoding fix for Rockchip IOMMU
- Add a reviewer for AMD IOMMU
* tag 'iommu-fixes-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Add Suravee Suthikulpanit as Reviewer for AMD IOMMU (AMD-Vi)
iommu/rockchip: Fix physical address decoding
iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries
iommu/vt-d: Global devTLB flush when present context entry changed
iommu/qcom: Revert "iommu/arm: Cleanup resources in case of probe error path"
|
|
Commit 82e5d378b0e47 ("mm/hugetlb: refactor subpage recording")
refactored the count of subpages but missed an edge case when @vaddr is
not aligned to PAGE_SIZE e.g. when close to vma->vm_end. It would then
errousnly set @refs to 0 and record_subpages_vmas() wouldn't set the
@pages array element to its value, consequently causing the reported
null-deref by syzbot.
Fix it by aligning down @vaddr by PAGE_SIZE in @refs calculation.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 82e5d378b0e47 ("mm/hugetlb: refactor subpage recording")
Reported-by: [email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Syzbot reports a possible recursive lock in [1].
This happens due to missing lock nesting information. From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed. Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root. This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.
Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.
To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+). This has already been done in hfsplus.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Reported-by: [email protected]
Tested-by: [email protected]
Reviewed-by: Viacheslav Dubeyko <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pages that we read in hfs_bnode_read need to be kmapped into kernel
address space. However, currently only the 0th page is kmapped. If the
given offset + length exceeds this 0th page, then we have an invalid
memory access.
To fix this, we kmap relevant pages one by one and copy their relevant
portions of data.
An example of invalid memory access occurring without this fix can be seen
in the following crash report:
==================================================================
BUG: KASAN: use-after-free in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: use-after-free in hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
Read of size 2 at addr ffff888125fdcffe by task syz-executor5/4634
CPU: 0 PID: 4634 Comm: syz-executor5 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x195/0x1f8 lib/dump_stack.c:120
print_address_description.constprop.0+0x1d/0x110 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7b/0xd4 mm/kasan/report.c:436
check_region_inline mm/kasan/generic.c:180 [inline]
kasan_check_range+0x154/0x1b0 mm/kasan/generic.c:186
memcpy+0x24/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
hfs_bnode_read_u16 fs/hfs/bnode.c:34 [inline]
hfs_bnode_find+0x880/0xcc0 fs/hfs/bnode.c:365
hfs_brec_find+0x2d8/0x540 fs/hfs/bfind.c:126
hfs_brec_read+0x27/0x120 fs/hfs/bfind.c:165
hfs_cat_find_brec+0x19a/0x3b0 fs/hfs/catalog.c:194
hfs_fill_super+0xc13/0x1460 fs/hfs/super.c:419
mount_bdev+0x331/0x3f0 fs/super.c:1368
hfs_mount+0x35/0x40 fs/hfs/super.c:457
legacy_get_tree+0x10c/0x220 fs/fs_context.c:592
vfs_get_tree+0x93/0x300 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x13f5/0x20e0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount fs/namespace.c:3433 [inline]
__x64_sys_mount+0x2b8/0x340 fs/namespace.c:3433
do_syscall_64+0x37/0xc0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x45e63a
Code: 48 c7 c2 bc ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d2 e8 88 04 00 00 0f 1f 84 00 00 00 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9404d410d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000020000248 RCX: 000000000045e63a
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007f9404d41120
RBP: 00007f9404d41120 R08: 00000000200002c0 R09: 0000000020000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000003 R14: 00000000004ad5d8 R15: 0000000000000000
The buggy address belongs to the page:
page:00000000dadbcf3e refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x125fdc
flags: 0x2fffc0000000000(node=0|zone=2|lastcpupid=0x3fff)
raw: 02fffc0000000000 ffffea000497f748 ffffea000497f6c8 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888125fdce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888125fdcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888125fdd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Reviewed-by: Viacheslav Dubeyko <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "hfs: fix various errors", v2.
This series ultimately aims to address a lockdep warning in
hfs_find_init reported by Syzbot [1].
The work done for this led to the discovery of another bug, and the
Syzkaller repro test also reveals an invalid memory access error after
clearing the lockdep warning. Hence, this series is broken up into
three patches:
1. Add a missing call to hfs_find_exit for an error path in
hfs_fill_super
2. Fix memory mapping in hfs_bnode_read by fixing calls to kmap
3. Add lock nesting notation to tell lockdep that the observed locking
hierarchy is safe
This patch (of 3):
Before exiting hfs_fill_super, the struct hfs_find_data used in
hfs_find_init should be passed to hfs_find_exit to be cleaned up, and to
release the lock held on the btree.
The call to hfs_find_exit is missing from an error path. We add it back
in by consolidating calls to hfs_find_exit for error paths.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Reviewed-by: Viacheslav Dubeyko <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The HMM selftests use atomic_check_access() to check atomic access to a
page has been revoked. It doesn't matter if the page mapping has been
removed from the mirrored page tables as that also implies atomic access
has been revoked. Therefore remove the unused page variable to fix this
compiler warning:
lib/test_hmm.c:631:16: warning: variable `page' set but not used [-Wunused-but-set-variable]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b659baea7546 ("mm: selftests for exclusive device memory")
Signed-off-by: Alistair Popple <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Yang Yingliang <[email protected]>
Acked-by: Souptick Joarder <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Adjust the nommu stub of try_to_unmap to match the changed protype for the
full version. Turn it into an inline instead of a macro to generally
improve the type checking.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 1fb08ac63bee ("mm: rmap: make try_to_unmap() void function")
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The author of commit b3b64ebd3822 ("mm/page_alloc: do bulk array
bounds check after checking populated elements") was possibly
confused by the mixture of return values throughout the function.
The API contract is clear that the function "Returns the number of pages
on the list or array." It does not list zero as a unique return value with
a special meaning. Therefore zero is a plausible return value only if
@nr_pages is zero or less.
Clean up the return logic to make it clear that the returned value is
always the total number of pages in the array/list, not the number of
pages that were allocated during this call.
The only change in behavior with this patch is the value returned if
prepare_alloc_pages() fails. To match the API contract, the number of
pages currently in the array/list is returned in this case.
The call site in __page_pool_alloc_pages_slow() also seems to be confused
on this matter. It should be attended to by someone who is familiar with
that code.
[[email protected]: Return nr_populated if 0 pages are requested]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Cc: Desmond Cheong Zhi Xi <[email protected]>
Cc: Zhang Qiang <[email protected]>
Cc: Yanfei Xu <[email protected]>
Cc: Matteo Croce <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If the array passed in is already partially populated, we should return
"nr_populated" even failing at preparing arguments stage.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yanfei Xu <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Syzbot is reporting potential deadlocks due to pagesets.lock when
PAGE_OWNER is enabled. One example from Desmond Cheong Zhi Xi is as
follows
__alloc_pages_bulk()
local_lock_irqsave(&pagesets.lock, flags) <---- outer lock here
prep_new_page():
post_alloc_hook():
set_page_owner():
__set_page_owner():
save_stack():
stack_depot_save():
alloc_pages():
alloc_page_interleave():
__alloc_pages():
get_page_from_freelist():
rm_queue():
rm_queue_pcplist():
local_lock_irqsave(&pagesets.lock, flags);
*** DEADLOCK ***
Zhang, Qiang also reported
BUG: sleeping function called from invalid context at mm/page_alloc.c:5179
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
.....
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:96
___might_sleep.cold+0x1f1/0x237 kernel/sched/core.c:9153
prepare_alloc_pages+0x3da/0x580 mm/page_alloc.c:5179
__alloc_pages+0x12f/0x500 mm/page_alloc.c:5375
alloc_page_interleave+0x1e/0x200 mm/mempolicy.c:2147
alloc_pages+0x238/0x2a0 mm/mempolicy.c:2270
stack_depot_save+0x39d/0x4e0 lib/stackdepot.c:303
save_stack+0x15e/0x1e0 mm/page_owner.c:120
__set_page_owner+0x50/0x290 mm/page_owner.c:181
prep_new_page mm/page_alloc.c:2445 [inline]
__alloc_pages_bulk+0x8b9/0x1870 mm/page_alloc.c:5313
alloc_pages_bulk_array_node include/linux/gfp.h:557 [inline]
vm_area_alloc_pages mm/vmalloc.c:2775 [inline]
__vmalloc_area_node mm/vmalloc.c:2845 [inline]
__vmalloc_node_range+0x39d/0x960 mm/vmalloc.c:2947
__vmalloc_node mm/vmalloc.c:2996 [inline]
vzalloc+0x67/0x80 mm/vmalloc.c:3066
There are a number of ways it could be fixed. The page owner code could
be audited to strip GFP flags that allow sleeping but it'll impair the
functionality of PAGE_OWNER if allocations fail. The bulk allocator could
add a special case to release/reacquire the lock for prep_new_page and
lookup PCP after the lock is reacquired at the cost of performance. The
pages requiring prep could be tracked using the least significant bit and
looping through the array although it is more complicated for the list
interface. The options are relatively complex and the second one still
incurs a performance penalty when PAGE_OWNER is active so this patch takes
the simple approach -- disable bulk allocation of PAGE_OWNER is active.
The caller will be forced to allocate one page at a time incurring a
performance penalty but PAGE_OWNER is already a performance penalty.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <[email protected]>
Reported-by: Desmond Cheong Zhi Xi <[email protected]>
Reported-by: "Zhang, Qiang" <[email protected]>
Reported-by: [email protected]
Tested-by: [email protected]
Acked-by: Rafael Aquini <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This reverts commit f7173090033c70886d925995e9dfdfb76dbb2441.
Fix an unresolved symbol error when CONFIG_DEBUG_INFO_BTF=y:
LD vmlinux
BTFIDS vmlinux
FAILED unresolved symbol should_fail_alloc_page
make: *** [Makefile:1199: vmlinux] Error 255
make: *** Deleting file 'vmlinux'
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f7173090033c ("mm/page_alloc: make should_fail_alloc_page() static")
Signed-off-by: Matteo Croce <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Tested-by: John Hubbard <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The <linux/kasan.h> header relies on _RET_IP_ being defined, and had been
receiving that definition via inclusion of bug.h which includes kernel.h.
However, since f39650de687e ("kernel.h: split out panic and oops helpers")
that is no longer the case and get the following build error when building
CONFIG_KASAN_HW_TAGS on arm64:
In file included from arch/arm64/mm/kasan_init.c:10:
include/linux/kasan.h: In function 'kasan_slab_free':
include/linux/kasan.h:230:39: error: '_RET_IP_' undeclared (first use in this function)
230 | return __kasan_slab_free(s, object, _RET_IP_, init);
Fix it by including kernel.h from kasan.h.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f39650de687e ("kernel.h: split out panic and oops helpers")
Signed-off-by: Marco Elver <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Peter Collingbourne <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Issue: when SLUB debug is on, hwtag kasan_unpoison() would overwrite the
redzone of object with unaligned size.
An additional memzero_explicit() path is added to replacing init by hwtag
instruction for those unaligned size at SLUB debug mode.
The penalty is acceptable since they are only enabled in debug mode, not
production builds. A block of comment is added for explanation.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yee Lee <[email protected]>
Suggested-by: Andrey Konovalov <[email protected]>
Suggested-by: Marco Elver <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Nicholas Tang <[email protected]>
Cc: Kuan-Ying Lee <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Move the helper to check slub_debug_enabled, so that we can confine the
use of #ifdef outside slub.c as well.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Yee Lee <[email protected]>
Suggested-by: Matthew Wilcox <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Kuan-Ying Lee <[email protected]>
Cc: Nicholas Tang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If we encounter a directory that has been configured to pass on an
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should flag the hint for
administrative review because that is a misconfiguration (that other
parts of the kernel will fix automatically).
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
During a realtime grow operation, we run a single transaction for each
rt bitmap block added to the filesystem. This means that each step has
to be careful to increase sb_rblocks appropriately.
Fix the integer overflow error in this calculation that can happen when
the extent size is very large. Found by running growfs to add a rt
volume to a filesystem formatted with a 1g rt extent size.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
Improve the checking at the start of a realtime grow operation so that
we avoid accidentally set a new extent size that is too large and avoid
adding an rt volume to a filesystem with rmap or reflink because we
don't support rt rmap or reflink yet.
While we're at it, separate the checks so that we're only testing one
aspect at a time.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
Commit 603f000b15f2 changed xfs_ioctl_setattr_check_extsize to reject an
attempt to set an EXTSZINHERIT extent size hint on a directory with
RTINHERIT set if the hint isn't a multiple of the realtime extent size.
However, I have recently discovered that it is possible to change the
realtime extent size when adding a rt device to a filesystem, which
means that the existence of directories with misaligned inherited hints
is not an accident.
As a result, it's possible that someone could have set a valid hint and
added an rt volume with a different rt extent size, which invalidates
the ondisk hints. After such a sequence, FSGETXATTR will report a
misaligned hint, which FSSETXATTR will trip over, causing confusion if
the user was doing the usual GET/SET sequence to change some other
attribute. Change xfs_fill_fsxattr to omit the hint if it isn't aligned
properly.
Fixes: 603f000b15f2 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
While auditing the realtime growfs code, I realized that the GROWFSRT
ioctl (and by extension xfs_growfs) has always allowed sysadmins to
change the realtime extent size when adding a realtime section to the
filesystem. Since we also have always allowed sysadmins to set
RTINHERIT and EXTSZINHERIT on directories even if there is no realtime
device, this invalidates the premise laid out in the comments added in
commit 603f000b15f2.
In other words, this is not a case of inadequate metadata validation.
This is a case of nearly forgotten (and apparently untested) but
supported functionality. Update the comments to reflect what we've
learned, and remove the log message about correcting the misalignment.
Fixes: 603f000b15f2 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
While running xfs/168, I noticed a second source of post-shrink
corruption errors causing shutdowns.
Let's say that directory B has a low inode number and is a child of
directory A, which has a high number. If B is empty but open, and
unlinked from A, B's dotdot link continues to point to A. If A is then
unlinked and the filesystem shrunk so that A is no longer a valid inode,
a subsequent AIL push of B will trip the inode verifiers because the
dotdot entry points outside of the filesystem.
To avoid this problem, reset B's dotdot entry to the root directory when
unlinking directories, since the root directory cannot be removed.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
|
|
While running xfs/168, I noticed occasional write verifier shutdowns
involving inodes at the very end of the filesystem. Existing inode
btree validation code checks that all inode clusters are fully contained
within the filesystem.
However, due to inadequate checking in the fs shrink code, it's possible
that there could be a sparse inode cluster at the end of the filesystem
where the upper inodes of the cluster are marked as holes and the
corresponding blocks are free. In this case, the last blocks in the AG
are listed in the bnobt. This enables the shrink to proceed but results
in a filesystem that trips the inode verifiers. Fix this by disallowing
the shrink.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
|
|
Now that we create those objects in iomap_writepage_map when needed,
there's no need to pre-create them in iomap_page_mkwrite_actor anymore.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
In iomap_readpage_actor, don't create iop objects for inline inodes.
Otherwise, iomap_read_inline_data will set PageUptodate without setting
iop->uptodate, and iomap_page_release will eventually complain.
To prevent this kind of bug from occurring in the future, make sure the
page doesn't have private data attached in iomap_read_inline_data.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
Create an iop in the writeback path if one doesn't exist. This allows us
to avoid creating the iop in some cases. We'll initially do that for pages
with inline data, but it can be extended to pages which are entirely within
an extent. It also allows for an iop to be removed from pages in the
future (eg page split).
Co-developed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
The length variable is rather pointless given that it can be trivially
deduced from offset and size. Also the initial calculation can lead
to KASAN warnings.
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Leizhen (ThunderTown) <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
The length variable is rather pointless given that it can be trivially
deduced from offset and size. Also the initial calculation can lead
to KASAN warnings.
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Leizhen (ThunderTown) <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
We suppress KCOV for entry.o rather than entry-common.o. As entry.o is
built from entry.S, this is pointless, and permits instrumentation of
entry-common.o, which is built from entry-common.c.
Fix the Makefile to suppress KCOV for entry-common.o, as we had intended
to begin with. I've verified with objdump that this is working as
expected.
Fixes: bf6fa2c0dda7 ("arm64: entry: don't instrument entry code with KCOV")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
We intend that all the early exception handling code is marked as
`noinstr`, but we forgot this for __el0_error_handler_common(), which is
called before we have completed entry from user mode. If it were
instrumented, we could run into problems with RCU, lockdep, etc.
Mark it as `noinstr` to prevent this.
The few other functions in entry-common.c which do not have `noinstr` are
called once we've completed entry, and are safe to instrument.
Fixes: bb8e93a287a5 ("arm64: entry: convert SError handlers to C")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Joey Gouly <[email protected]>
Cc: James Morse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Since commit:
bad1e1c663e0a72f ("arm64: mte: switch GCR_EL1 in kernel entry and exit")
we saved/restored the user GCR_EL1 value at exception boundaries, and
update_gcr_el1_excl() is no longer used for this. However it is used to
restore the kernel's GCR_EL1 value when returning from a suspend state.
Thus, the comment is misleading (and an ISB is necessary).
When restoring the kernel's GCR value, we need an ISB to ensure this is
used by subsequent instructions. We don't necessarily get an ISB by
other means (e.g. if the kernel is built without support for pointer
authentication). As __cpu_setup() initialised GCR_EL1.Exclude to 0xffff,
until a context synchronization event, allocation tag 0 may be used
rather than the desired set of tags.
This patch drops the misleading comment, adds the missing ISB, and for
clarity folds update_gcr_el1_excl() into its only user.
Fixes: bad1e1c663e0 ("arm64: mte: switch GCR_EL1 in kernel entry and exit")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Al reminds us that the usercopy API must only return complete failure
if absolutely nothing could be copied. Currently, if userspace does
something silly like giving us an unaligned pointer to Device memory,
or a size which overruns MTE tag bounds, we may fail to honour that
requirement when faulting on a multi-byte access even though a smaller
access could have succeeded.
Add a mitigation to the fixup routines to fall back to a single-byte
copy if we faulted on a larger access before anything has been written
to the destination, to guarantee making *some* forward progress. We
needn't be too concerned about the overall performance since this should
only occur when callers are doing something a bit dodgy in the first
place. Particularly broken userspace might still be able to trick
generic_perform_write() into an infinite loop by targeting write() at
an mmap() of some read-only device register where the fault-in load
succeeds but any store synchronously aborts such that copy_to_user() is
genuinely unable to make progress, but, well, don't do that...
CC: [email protected]
Reported-by: Chen Huang <[email protected]>
Suggested-by: Al Viro <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/dc03d5c675731a1f24a62417dba5429ad744234e.1626098433.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
xen-blkfront has a weird protocol where close message from the remote
side can be delayed, and where hot removals are treated somewhat
differently from regular removals, all leading to potential NULL
pointer removals, and a del_gendisk from the block device release
method, which will deadlock. Fix this by just performing normal hot
removals even when the device is opened like all other Linux block
drivers.
Fixes: c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk")
Reported-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.14
- fix various races in nvme-pci when shutting down just after probing
(Casey Chen)
- fix a net_device leak in nvme-tcp (Prabhakar Kushwaha)"
* tag 'nvme-5.14-2021-07-15' of git://git.infradead.org/nvme:
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
nvme-pci: fix multiple races in nvme_setup_io_queues
nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE
|
|
We must release the queue before freeing the tagset.
Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Reported-and-tested-by: [email protected]
Signed-off-by: Wang Qing <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
We must release the queue before freeing the tagset.
Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Guoqing Jiang <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
There's no need for fixed strings to be under 'patternProperties', so move
them under 'properties' instead.
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Saravanan Sekar <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Troy Kisky <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Another round of removing redundant minItems/maxItems from new schema in
the recent merge window.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but
only if both 'minItems' and 'maxItems' are equal to the 'items' length.
An improved meta-schema is pending.
Cc: Stephen Boyd <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sureshkumar Relli <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Kamal Dasu <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Two additional tests are added:
- SMM triggered from L2 does not currupt L1 host state.
- Save/restore during SMM triggered from L2 does not corrupt guest/host
state.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
If the VM was migrated while in SMM, no nested state was saved/restored,
and therefore svm_leave_smm has to load both save and control area
of the vmcb12. Save area is already loaded from HSAVE area,
so now load the control area as well from the vmcb12.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
VMCB split commit 4995a3685f1b ("KVM: SVM: Use a separate vmcb for the
nested L2 guest") broke return from SMM when we entered there from guest
(L2) mode. Gen2 WS2016/Hyper-V is known to do this on boot. The problem
manifests itself like this:
kvm_exit: reason EXIT_RSM rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_smm_transition: vcpu 0: leaving SMM, smbase 0x7ffb3000
kvm_nested_vmrun: rip: 0x000000007ffbb280 vmcb: 0x0000000008224000
nrip: 0xffffffffffbbe119 int_ctl: 0x01020000 event_inj: 0x00000000
npt: on
kvm_nested_intercepts: cr_read: 0000 cr_write: 0010 excp: 40060002
intercepts: fd44bfeb 0000217f 00000000
kvm_entry: vcpu 0, rip 0xffffffffffbbe119
kvm_exit: reason EXIT_NPF rip 0xffffffffffbbe119 info
200000006 1ab000
kvm_nested_vmexit: vcpu 0 reason npf rip 0xffffffffffbbe119 info1
0x0000000200000006 info2 0x00000000001ab000 intr_info 0x00000000
error_code 0x00000000
kvm_page_fault: address 1ab000 error_code 6
kvm_nested_vmexit_inject: reason EXIT_NPF info1 200000006 info2 1ab000
int_info 0 int_info_err 0
kvm_entry: vcpu 0, rip 0x7ffbb280
kvm_exit: reason EXIT_EXCP_GP rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_inj_exception: #GP (0x0)
Note: return to L2 succeeded but upon first exit to L1 its RIP points to
'RSM' instruction but we're not in SMM.
The problem appears to be that VMCB01 gets irreversibly destroyed during
SMM execution. Previously, we used to have 'hsave' VMCB where regular
(pre-SMM) L1's state was saved upon nested_svm_vmexit() but now we just
switch to VMCB01 from VMCB02.
Pre-split (working) flow looked like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() restores L1's state from 'hsave'
- SMM -> RSM
- enter_svm_guest_mode() switches to L2 but keeps 'hsave' intact so we have
pre-SMM (and pre L2 VMRUN) L1's state there
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from L1.
This was always broken with regards to svm_get_nested_state()/
svm_set_nested_state(): 'hsave' was never a part of what's being
save and restored so migration happening during SMM triggered from L2 would
never restore L1's state correctly.
Post-split flow (broken) looks like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() switches to VMCB01 from VMCB02
- SMM -> RSM
- enter_svm_guest_mode() switches from VMCB01 to VMCB02 but pre-SMM VMCB01
is already lost.
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from VMCB01 but it is corrupted
(reflects the state during 'RSM' execution).
VMX doesn't have this problem because unlike VMCB, VMCS keeps both guest
and host state so when we switch back to VMCS02 L1's state is intact there.
To resolve the issue we need to save L1's state somewhere. We could've
created a third VMCB for SMM but that would require us to modify saved
state format. L1's architectural HSAVE area (pointed by MSR_VM_HSAVE_PA)
seems appropriate: L0 is free to save any (or none) of L1's state there.
Currently, KVM does 'none'.
Note, for nested state migration to succeed, both source and destination
hypervisors must have the fix. We, however, don't need to create a new
flag indicating the fact that HSAVE area is now populated as migration
during SMM triggered from L2 was always broken.
Fixes: 4995a3685f1b ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Separate the code setting non-VMLOAD-VMSAVE state from
svm_set_nested_state() into its own function. This is going to be
re-used from svm_enter_smm()/svm_leave_smm().
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
APM states that "The address written to the VM_HSAVE_PA MSR, which holds
the address of the page used to save the host state on a VMRUN, must point
to a hypervisor-owned page. If this check fails, the WRMSR will fail with
a #GP(0) exception. Note that a value of 0 is not considered valid for the
VM_HSAVE_PA MSR and a VMRUN that is attempted while the HSAVE_PA is 0 will
fail with a #GP(0) exception."
svm_set_msr() already checks that the supplied address is valid, so only
check for '0' is missing. Add it to nested_svm_vmrun().
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
APM states that #GP is raised upon write to MSR_VM_HSAVE_PA when
the supplied address is not page-aligned or is outside of "maximum
supported physical address for this implementation".
page_address_valid() check seems suitable. Also, forcefully page-align
the address when it's written from VMM.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Reviewed-by: Maxim Levitsky <[email protected]>
[Add comment about behavior for host-provided values. - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use IS_ERR() instead of checking for a NULL pointer when querying for
sev_pin_memory() failures. sev_pin_memory() always returns an error code
cast to a pointer, or a valid pointer; it never returns NULL.
Reported-by: Dan Carpenter <[email protected]>
Cc: Steve Rutherford <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: Ashish Kalra <[email protected]>
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Return -EFAULT if copy_to_user() fails; if accessing user memory faults,
copy_to_user() returns the number of bytes remaining, not an error code.
Reported-by: Dan Carpenter <[email protected]>
Cc: Steve Rutherford <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: Ashish Kalra <[email protected]>
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
In theory there are no side effects of not intercepting #SMI,
because then #SMI becomes transparent to the OS and the KVM.
Plus an observation on recent Zen2 CPUs reveals that these
CPUs ignore #SMI interception and never deliver #SMI VMexits.
This is also useful to test nested KVM to see that L1
handles #SMIs correctly in case when L1 doesn't intercept #SMI.
Finally the default remains the same, the SMI are intercepted
by default thus this patch doesn't have any effect unless
non default module param value is used.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Kernel never sends real INIT even to CPUs, other than on boot.
Thus INIT interception is an error which should be caught
by a check for an unknown VMexit reason.
On top of that, the current INIT VM exit handler skips
the current instruction which is wrong.
That was added in commit 5ff3a351f687 ("KVM: x86: Move trivial
instruction-based exit handlers to common code").
Fixes: 5ff3a351f687 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|