aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-12-01move libgcc.h to include/linuxChristoph Hellwig7-6/+6
Introducing a new include/lib directory just for this file totally messes up tab completion for include/linux, which is highly annoying. Move it to include/linux where we have headers for all kinds of other lib/ code as well. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2017-12-01md/raid1/10: add missed blk plugShaohua Li2-0/+8
flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <[email protected]>
2017-12-01md: limit mdstat resync progress to max_sectorsNate Dailey1-1/+3
There is a small window near the end of md_do_sync where mddev->curr_resync can be equal to MaxSector. If status_resync is called during this window, the resulting /proc/mdstat output contains a HUGE number of = signs due to the very large curr_resync: Personalities : [raid1] md123 : active raid1 sdd3[2] sdb3[0] 204736 blocks super 1.0 [2/1] [U_] [===================================================================== ... (82 MB more) ... ================>] recovery =429496729.3% (9223372036854775807/204736) finish=0.2min speed=12796K/sec bitmap: 0/1 pages [0KB], 65536KB chunk Modify status_resync to ensure the resync variable doesn't exceed the array's max_sectors. Signed-off-by: Nate Dailey <[email protected]> Acked-by: Guoqing Jiang <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2017-12-01Merge branch 'sfp-phylink-fixes'David S. Miller2-11/+31
Russell King says: ==================== SFP/phylink fixes Here are four phylink fixes: - the "options" is a big-endian value, we must test the bits taking the endian-ness into account. - improve the handling of RX_LOS polarity, taking no RX_LOS polarity bits set to mean there is no RX_LOS functionality provided. - do not report modules that require the address mode switching as supporting SFF8472. - ensure that the mac_link_down() function is called when phylink_stop() is called. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-12-01phylink: ensure we take the link down when phylink_stop() is calledRussell King1-0/+1
Ensure that we tell the MAC to take the link down when phylink_stop() is called, and that this completes prior to phylink_stop() returns. Reported-by: Florian Fainelli <[email protected]> Tested-by: Florian Fainelli <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sfp: warn about modules requiring address change sequenceRussell King1-1/+7
We do not support SFP modules which require the address change sequence as detailed by SFF 8472 revision 1.22 section 8.9. Warn when these modules are inserted, and treat them as SFF8079 modules for ethtool. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sfp: improve RX_LOS handlingRussell King1-11/+22
There are two bits in the option word for the RX_LOS signal. One reports that the RX_LOS signal is active high, the other reports that it is active low. When both or neither are set, the result is not well defined in the specification. Rather than assuming that neither set means normal RX_LOS, take this as meaning no RX_LOS signal available, thereby ignoring the signal. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sfp: fix RX_LOS signal handlingRussell King1-3/+5
The options word is a be16 quantity, so we need to test the flags having converted the endian-ness. Convert the flag bits to be16, which can be optimised by the compiler, rather than converting a variable at runtime. Reported-by: Florian Fainelli <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01net: phy-micrel: check return code in flp center functionMax Uvarov1-2/+4
Fix obvious typo that first return value is set but not checked. Signed-off-by: Max Uvarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()Tommi Rantala1-4/+0
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d492b1f ("tipc: add replicast peer discovery") Signed-off-by: Tommi Rantala <[email protected]> Cc: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01tcp/dccp: block bh before arming time_wait timerEric Dumazet2-0/+12
Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1babe8f ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Maciej Żenczykowski <[email protected]> Acked-by: Maciej Żenczykowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01Merge branch 'sctp-prsctp-chunk-fixes'David S. Miller3-7/+26
Xin Long says: ==================== sctp: a couple of fixes for chunks abandoned in prsctp Now when abandoning chunks in prsctp, it doesn't consider for frags in one msg, which would cause peer can never receive the whole frags for one msg to get them reassembled, these pieces of this msg will stay in the reasm queue forever and block the following chunks' receiving. This patchset is to fix them in patch 2 and 3, and also fix another issue for prsctp in patch 1. ==================== Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sctp: do not abandon the other frags in unsent outq if one msg has ↵Xin Long2-1/+6
outstanding frags Now for the abandoned chunks in unsent outq, it would just free the chunks. Because no tsn is assigned to them yet, there's no need to send fwd tsn to peer, unlike for the abandoned chunks in sent outq. The problem is when parts of the msg have been sent and the other frags are still in unsent outq, if they are abandoned/dropped, the peer would never get this msg reassembled. So these frags in unsent outq can't be dropped if this msg already has outstanding frags. This patch does the check in sctp_chunk_abandoned and sctp_prsctp_prune_unsent. Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sctp: abandon the whole msg if one part of a fragmented message is abandonedXin Long3-5/+17
As rfc3758#section-3.1 demands: A3) When a TSN is "abandoned", if it is part of a fragmented message, all other TSN's within that fragmented message MUST be abandoned at the same time. Besides, if it couldn't handle this, the rest frags would never get assembled in peer side. This patch supports it by adding abandoned flag in sctp_datamsg, when one chunk is being abandoned, set chunk->msg->abandoned as well. Next time when checking for abandoned, go checking chunk->msg->abandoned first. Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01sctp: only update outstanding_bytes for transmitted queue when doing ↵Xin Long1-2/+4
prsctp_prune Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-01md/r5cache: move mddev_lock() out of r5c_journal_mode_set()Song Liu1-13/+9
r5c_journal_mode_set() is called by r5c_journal_mode_store() and raid_ctr() in dm-raid. We don't need mddev_lock() when calling from raid_ctr(). This patch fixes this by moves the mddev_lock() to r5c_journal_mode_store(). Cc: [email protected] (v4.13+) Signed-off-by: Song Liu <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2017-12-01md/raid5: correct degraded calculation in raid5_errorbingjingc1-1/+1
When disk failure occurs on new disks for reshape, mddev->degraded is not calculated correctly. Faulty bit of the failure device is not set before raid5_calc_degraded(conf). mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012] mdadm /dev/md0 -a /dev/loop3 mdadm /dev/md0 --grow -n4 mdadm /dev/md0 -f /dev/loop3 # simulating disk failure cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1. However, mdadm -D /dev/md0 will show that it is degraded. It's a bug. It can be fixed by moving the resources raid5_calc_degraded() depends on before it. Reported-by: Roy Chung <[email protected]> Reviewed-by: Alex Wu <[email protected]> Signed-off-by: BingJing Chang <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2017-12-01IB/core: Only enforce security for InfiniBandDaniel Jurgens1-4/+46
For now the only LSM security enforcement mechanism available is specific to InfiniBand. Bypass enforcement for non-IB link types. This fixes a regression where modify_qp fails for iWARP because querying the PKEY returns -EINVAL. Cc: Paul Moore <[email protected]> Cc: Don Dutile <[email protected]> Cc: [email protected] Reported-by: Potnuri Bharat Teja <[email protected]> Fixes: d291f1a65232("IB/core: Enforce PKey security on QPs") Fixes: 47a2b338fe63("IB/core: Enforce security on management datagrams") Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Tested-by: Potnuri Bharat Teja <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01RDMA/hns: Get rid of page operation after dma_alloc_coherentWei Hu\(Xavier\)2-12/+14
In general, dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the underlying memory even has an associated struct page at all. This patch gets rid of the page operation after dma_alloc_coherent, and records the VA returned form dma_alloc_coherent in the struct of hem in hns RoCE driver. Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <[email protected]> Signed-off-by: Shaobo Xu <[email protected]> Signed-off-by: Lijun Ou <[email protected]> Signed-off-by: Yixian Liu <[email protected]> Signed-off-by: Xiping Zhang (Francis) <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherentWei Hu\(Xavier\)2-26/+1
In general dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the virtual address is either in the linear map or vmalloc. It could be in some other special place. We have no guarantee that the underlying memory even has an associated struct page at all. In current code, there are incorrect usage as below: dma_alloc_coherent + virt_to_page + vmap. There will probably introduce coherency problem. This patch fixes it to get rid of virt_to_page and vmap calls at Leon's suggestion. The related link: https://lkml.org/lkml/2017/11/7/34 Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <[email protected]> Signed-off-by: Shaobo Xu <[email protected]> Signed-off-by: Lijun Ou <[email protected]> Signed-off-by: Yixian Liu <[email protected]> Signed-off-by: Xiping Zhang (Francis) <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01RDMA/hns: Fix the issue of IOVA not page continuous in hip08Wei Hu\(Xavier\)1-7/+15
If the smmu is enabled, the length of sg obtained from __iommu_map_sg_attrs is not 4kB. When the IOVA is set with the sg dma address, the IOVA will not be page continuous. so, the current code has MTPT configuration error that probably cause dma operation failure. In order to fix this issue, the IOVA should be calculated based on the sg length. Fixes: 3958cc5("RDMA/hns: Configure the MTPT in hip08") Signed-off-by: Wei Hu (Xavier) <[email protected]> Signed-off-by: Shaobo Xu <[email protected]> Signed-off-by: Lijun Ou <[email protected]> Signed-off-by: Yixian Liu <[email protected]> Signed-off-by: Xiping Zhang (Francis) <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01IB/core: Init subsys if compiled to vmlinuz-coreDmitry Monakhov1-1/+1
Once infiniband is compiled as a core component its subsystem must be enabled before device initialization. Otherwise there is a NULL pointer dereference during mlx4_core init, calltrace: ->device_add if (dev->class) { deref dev->class->p =>NULLPTR #Config CONFIG_NET_DEVLINK=y CONFIG_MAY_USE_DEVLINK=y CONFIG_MLX4_EN=y Signed-off-by: Dmitry Monakhov <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01RDMA/cma: Make sure that PSN is not over max allowedMoni Shoua1-0/+1
This patch limits the initial value for PSN to 24 bits as spec requires. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Mukesh Kacker <[email protected]> Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01i40iw: Notify user of established connection after QP in RTSHenry Orosco1-6/+11
Established CM event is sent prior to modifying QP to RTS state. This can result in application closing the connection before the QP is actually in RTS state. Move sending of established CM event to after modify QP to RTS. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Henry Orosco <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01i40iw: Move MPA request event for loopback after connectTatyana Nikolova1-2/+6
For loopback, a MPA request event is generated when cm_node is initialized, which allows applications to act on the connect request before i40iw_connect() has completed. In some cases, the reject flow executes in parallel with the connect flow and doesn't delete an APBVT entry, because the apbvt_set variable is still not set by the connect flow. Move the MPA request event to the end of i40iw_connect() to notify application for a connect request, after connect has completed. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova <[email protected]> Signed-off-by: Henry Orosco <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01i40iw: Correct ARP index maskMustafa Ismail1-1/+1
The ARP table entry indexes are aliased to 12bits instead of the intended 16bits when uploaded to the QP Context. This will present an issue when the number of connections exceeds 4096 as ARP entries are reused. Fix this by adjusting the mask to account for the full 16bits. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Signed-off-by: Mustafa Ismail <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSEMustafa Ismail1-3/+3
When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and it should not be freed as one in i40iw_schedule_cm_timer(). Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Mustafa Ismail <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01i40iw: Allocate a sdbuf per CQP WQEChien Tin Tung2-14/+33
Currently there is only one sdbuf per Control QP (CQP) for programming Segment Descriptor (SD). If multiple SD work requests are posted simultaneously, the sdbuf is reused by all WQEs and new WQEs can corrupt previous WQEs sdbuf leading to incorrect SD programming. Fix this by allocating one sdbuf per CQP SQ WQE. When an SD command is posted, it will use the corresponding sdbuf for the WQE. Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls") Signed-off-by: Chien Tin Tung <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2017-12-01usb: xhci: fix panic in xhci_free_virt_devices_depth_firstYu Chen1-0/+7
Check vdev->real_port 0 to avoid panic [ 9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108 [ 9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570 [ 9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8 [ 9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0 [ 9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8 [ 9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70 [ 9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108 [ 9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40 [ 9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120 [ 9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210 [ 9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0 [ 9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488 [ 9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8 [ 9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490 [ 9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0 [ 9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100 [ 9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50 The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4. Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first") Cc: Guenter Roeck <[email protected]> Cc: <[email protected]> # v4.10+ Reviewed-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Fan Ning <[email protected]> Signed-off-by: Li Rui <[email protected]> Signed-off-by: yangdi <[email protected]> Signed-off-by: Yu Chen <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-12-01xhci: Don't show incorrect WARN message about events for empty ringsMathias Nyman1-4/+8
xHC can generate two events for a short transfer if the short TRB and last TRB in the TD are not the same TRB. The driver will handle the TD after the first short event, and remove it from its internal list. Driver then incorrectly prints a warning for the second event: "WARN Event TRB for slot x ep y with no TDs queued" Fix this by not printing a warning if we get a event on a empty list if the previous event was a short event. Cc: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-12-01virtio_balloon: fix increment of vb->num_pfns in fill_balloon()Jan Stancek1-2/+1
commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <[email protected]> Cc: Tetsuo Handa <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Wei Wang <[email protected]> Cc: [email protected] Signed-off-by: Jan Stancek <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2017-12-01virtio: release virtio index when fail to device_registerweiping zhang1-0/+2
index can be reused by other virtio device. Cc: [email protected] Signed-off-by: weiping zhang <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2017-12-01fw_cfg: fix driver removeMarc-André Lureau1-1/+2
On driver remove(), all objects created during probe() should be removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder functions to match probe() error cleanup code. Cc: [email protected] Signed-off-by: Marc-André Lureau <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2017-12-01Merge tag 'powerpc-4.15-3' of ↵Linus Torvalds4-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for nasty kexec/kdump crashes in certain configurations. A couple of minor fixes for the new TIDR code. A fix for an oops in a CXL error handling path. Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain" * tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Do not assign thread.tidr if already assigned powerpc: Avoid signed to unsigned conversion in set_thread_tidr() powerpc/kexec: Fix kexec/kdump in P9 guest kernels powerpc/powernv: Fix kexec crashes caused by tlbie tracing cxl: Check if vphb exists before iterating over AFU devices
2017-12-01Merge tag 'afs-fixes-20171201' of ↵Linus Torvalds3-10/+27
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Two fix patches for the AFS filesystem: - Fix the refcounting on permit caching. - AFS inode (afs_vnode) fields need resetting after allocation because they're only initialised when slab pages are obtained from the page allocator" * tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Properly reset afs_vnode (inode) fields afs: Fix permit refcounting
2017-12-01Merge tag 'mmc-v4.15-2' of ↵Linus Torvalds7-21/+98
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Ensure that debugfs files are removed properly - Fix missing blk_put_request() - Deal with errors from blk_get_request() - Rewind mmc bus suspend operations at failures - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex MMC host: - sdhci-msm: Make it optional to wait for signal level changes - sdhci: Avoid swiotlb buffer being full" * tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: prepend 0x to OCR entry in sysfs mmc: core: prepend 0x to pre_eol_info entry in sysfs mmc: sdhci: Avoid swiotlb buffer being full mmc: sdhci-msm: Optionally wait for signal level changes mmc: block: Ensure that debugfs files are removed mmc: core: Do not leave the block driver in a suspended state mmc: block: Check return value of blk_get_request() mmc: block: Fix missing blk_put_request()
2017-12-01Merge tag 'drm-fixes-for-v4.15-rc2' of ↵Linus Torvalds67-483/+814
git://people.freedesktop.org/~airlied/linux Pull drm fixes and cleanups from Dave Airlie: "The main thing are a bunch of fixes for the new amd display code, a bunch of smatch fixes. core: - Atomic helper regression fix. - Deferred fbdev fallout regression fix. amdgpu: - New display code (dc) dpms, suspend/resume and smatch fixes, along with some others - Some regression fixes for amdkfd/radeon. - Fix a ttm regression for swiotlb disabled bridge: - A bunch of fixes for the tc358767 bridge mali-dp + hdlcd: - some fixes and internal API catchups. imx-drm: -regression fix in atomic code. omapdrm: - platform detection regression fixes" * tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits) drm/imx: always call wait_for_flip_done in commit_tail omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()' drm/i915: Disable THP until we have a GPU read BW W/A drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd drm/ttm: fix populate_and_map() functions once more drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive ...
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds22-211/+291
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-12-01arm64: context: Fix comments and remove pointless smp_wmb()Will Deacon1-11/+12
The comments in the ASID allocator incorrectly hint at an MP-style idiom using the asid_generation and the active_asids array. In fact, the synchronisation is achieved using a combination of an xchg operation and a spinlock, so update the comments and remove the pointless smp_wmb(). Cc: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: cpu_ops: Add missing 'const' qualifiersYury Norov1-3/+3
Building the kernel with an LTO-enabled GCC spits out the following "const" warning for the cpu_ops code: mm/percpu.c:2168:20: error: pcpu_fc_names causes a section type conflict with dt_supported_cpu_ops const char * const pcpu_fc_names[PCPU_FC_NR] __initconst = { ^ arch/arm64/kernel/cpu_ops.c:34:37: note: ‘dt_supported_cpu_ops’ was declared here static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = { Fix it by adding missed const qualifiers. Signed-off-by: Yury Norov <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: perf: remove unsupported events for Cortex-A73Xu YiPing1-6/+0
bus access read/write events are not supported in A73, based on the Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Fixes: 5561b6c5e981 "arm64: perf: add support for Cortex-A73" Acked-by: Julien Thierry <[email protected]> Signed-off-by: Xu YiPing <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: fpsimd: Fix failure to restore FPSIMD state after signalsDave Martin1-3/+3
The fpsimd_update_current_state() function is responsible for loading the FPSIMD state from the user signal frame into the current task during sigreturn. When implementing support for SVE, conditional code was added to this function in order to handle the case where SVE state need to be loaded for the task and merged with the FPSIMD data from the signal frame; however, the FPSIMD-only case was unintentionally dropped. As a result of this, sigreturn does not currently restore the FPSIMD state of the task, except in the case where the system supports SVE and the signal frame contains SVE state in addition to FPSIMD state. This patch fixes this bug by making the copy-in of the FPSIMD data from the signal frame to thread_struct unconditional. This remains a performance regression from v4.14, since the FPSIMD state is now copied into thread_struct and then loaded back, instead of _only_ being loaded into the CPU FPSIMD registers. However, it is essential to call task_fpsimd_load() here anyway in order to ensure that the SVE enable bit in CPACR_EL1 is set correctly before returning to userspace. This could use some refactoring, but since sigreturn is not a fast path I have kept this patch as a pure fix and left the refactoring for later. Cc: Catalin Marinas <[email protected]> Cc: Ard Biesheuvel <[email protected]> Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Reported-by: Alex Bennée <[email protected]> Tested-by: Alex Bennée <[email protected]> Reviewed-by: Alex Bennée <[email protected]> Signed-off-by: Dave Martin <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: pgd: Mark pgd_cache as __ro_after_initJinbum Park1-1/+1
pgd_cache is setup once while init stage and never changed after that, so it is good candidate for __ro_after_init Signed-off-by: Jinbum Park <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: ftrace: emit ftrace-mod.o contents through codeArd Biesheuvel7-31/+22
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built with the kernel and contains a trampoline that is linked into each module, so that modules can be loaded far away from the kernel and still reach the ftrace entry point in the core kernel with an ordinary relative branch, as is emitted by the compiler instrumentation code dynamic ftrace relies on. In order to be able to build out of tree modules, this object file needs to be included into the linux-headers or linux-devel packages, which is undesirable, as it makes arm64 a special case (although a precedent does exist for 32-bit PPC). Given that the trampoline essentially consists of a PLT entry, let's not bother with a source or object file for it, and simply patch it in whenever the trampoline is being populated, using the existing PLT support routines. Cc: <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01arm64: module-plts: factor out PLT generation code for ftraceArd Biesheuvel2-36/+46
To allow the ftrace trampoline code to reuse the PLT entry routines, factor it out and move it into asm/module.h. Cc: <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-12-01afs: Properly reset afs_vnode (inode) fieldsDavid Howells2-2/+17
When an AFS inode is allocated by afs_alloc_inode(), the allocated afs_vnode struct isn't necessarily reset from the last time it was used as an inode because the slab constructor is only invoked once when the memory is obtained from the page allocator. This means that information can leak from one inode to the next because we're not calling kmem_cache_zalloc(). Some of the information isn't reset, in particular the permit cache pointer. Bring the clearances up to date. Signed-off-by: David Howells <[email protected]> Tested-by: Marc Dionne <[email protected]>
2017-12-01afs: Fix permit refcountingDavid Howells1-8/+10
Fix four refcount bugs in afs_cache_permit(): (1) When checking the result of the kzalloc(), we can't just return, but must put 'permits'. (2) We shouldn't put permits immediately after hashing a new permit as we need to keep the pointer stable so that we can check to see if vnode->permit_cache has changed before we decide whether to assign to it. (3) 'permits' is being put twice. (4) We need to put either the replacement or the thing replaced after the assignment to vnode->permit_cache. Without this, lots of the following are seen: Kernel BUG at ffffffffa039857b [verbose debug info unavailable] ------------[ cut here ]------------ Kernel BUG at ffffffffa039858a [verbose debug info unavailable] ------------[ cut here ]------------ The addresses are in the .text..refcount section of the kafs.ko module. Following the relocation records for the __ex_table section shows one to be due to the decrement in afs_put_permits() and the other to be key_get() in afs_cache_permit(). Occasionally, the following is seen: refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0 WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac ... Reported-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Tested-by: Marc Dionne <[email protected]>
2017-12-01can: mcba_usb: fix device disconnect bugMartin Kelly1-0/+1
Currently, when you disconnect the device, the driver infinitely resubmits all URBs, so you see: Rx URB aborted (-32) in an infinite loop. Fix this by catching -EPIPE (what we get in urb->status when the device disconnects) and not resubmitting. With this patch, I can plug and unplug many times and the driver recovers correctly. Signed-off-by: Martin Kelly <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2017-12-01can: mcba_usb: fix typoMartin Kelly1-1/+1
Fix typo "analizer" --> "Analyzer". Signed-off-by: Martin Kelly <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2017-12-01can: flexcan: fix VF610 state transition issueMarc Kleine-Budde1-2/+3
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state transitions. Tested-by: Mirza Krak <[email protected]> Cc: linux-stable <[email protected]> # >= v4.11 Signed-off-by: Marc Kleine-Budde <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.