aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-11Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds18-119/+221
Pull drm fixes from Dave Airlie: "Not a huge amount for rc2, assume the usual quiet period, and rc3 will be most of it. amdgpu: - Powerplay fixes - Virtual display pinning fixes - Golden register updates for Vega - Pitch and gem size validation fixes - SR-IOV init error fix - Pagetables in system RAM disable for some Raven system - DP-MST resume fixes tc358767 bridge: - fix to work with displayport connector" * tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits) drm/amdgpu: disable system memory page tables for now drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 drm/bridge: tc358767: use DP connector if no panel set drm/bridge: tc358767: fix output H/V syncs drm/bridge: tc358767: reject modes which require too much BW drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value drm/bridge: tc358767: fix single lane configuration drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE drm/bridge: tc358767: add bus flags drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume() drm/amdgpu: Don't fail resume process if resuming atomic state fails drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume() drm/amdgpu: validate user GEM object size drm/amdgpu: validate user pitch alignment drm/amd/powerplay: drop the unnecessary uclk hard min setting drm/amd/powerplay: avoid possible buffer overflow drm/amd/powerplay: create pp_od_clk_voltage device file under OD support drm/amd/powerplay: update OD support flag for SKU with no OD capabilities drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG ...
2019-01-11tty: Don't hold ldisc lock in tty_reopen() if ldisc presentDmitry Safonov1-7/+13
Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <[email protected]> Reported-by: Lukas F. Hartmann <[email protected]> Tested-by: Lukas F. Hartmann <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11cifs: update internal module version numberSteve French1-1/+1
To 2.16 Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix error paths in writeback codePavel Shilovsky4-9/+56
This patch aims to address writeback code problems related to error paths. In particular it respects EINTR and related error codes and stores and returns the first error occurred during writeback. Signed-off-by: Pavel Shilovsky <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Move credit processing to mid callbacks for SMB3Pavel Shilovsky1-17/+34
Currently we account for credits in the thread initiating a request and waiting for a response. The demultiplex thread receives the response, wakes up the thread and the latter collects credits from the response buffer and add them to the server structure on the client. This approach is not accurate, because it may race with reconnect events in the demultiplex thread which resets the number of credits. Fix this by moving credit processing to new mid callbacks that collect credits granted by the server from the response in the demultiplex thread. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix credits calculation for cancelled requestsPavel Shilovsky2-2/+27
If a request is cancelled, we can't assume that the server returns 1 credit back. Instead we need to wait for a response and process the number of credits granted by the server. Create a separate mid callback for cancelled request, parse the number of credits in a response buffer and add them to the client's credits. If the didn't get a response (no response buffer available) assume 0 credits granted. The latter most probably happens together with session reconnect, so the client's credits are adjusted anyway. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: Fix potential OOB access of lock element arrayRoss Lagerwall2-6/+6
If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-11cifs: Limit memory used by lock request calls to a pageRoss Lagerwall2-0/+12
The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: move large array from stack to heapAurelien Aptel2-14/+32
This addresses some compile warnings that you can see depending on configuration settings. Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Do not hide EINTR after sending network packetsPavel Shilovsky1-1/+1
Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: <[email protected]> Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11ARM: integrator: impd1: use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]>
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro1-1/+3
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11ACPI/IORT: Fix rc_dma_get_range()Jean-Philippe Brucker1-1/+2
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger <[email protected]> Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Eric Auger <[email protected]> Acked-by: Robin Murphy <[email protected]> Cc: [email protected] Cc: Will Deacon <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Sudeep Holla <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11Revert "staging: rtl8723bs: Mark ACPI table declaration as used"Greg Kroah-Hartman1-1/+1
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c. Turns out it is not needed at all, a fix for clang was made and accepted upstream in that project that makes this change unnecessary. So revert it. Reported-by: Nick Desaulniers <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11Merge tag 'drm-intel-fixes-2019-01-11' of ↵Daniel Vetter10-39/+98
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes i915 fixes for v5.0-rc2: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix Signed-off-by: Daniel Vetter <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10-1' of ↵Daniel Vetter3-58/+82
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Second pull request, drm-misc-fixes for v5.0-rc2: - Fix fb-helper to work correctly with SDL 1.2 bugs. - Fix lockdep warning in the atomic ioctl and setproperty. Signed-off-by: Daniel Vetter <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge branches 'acpi-pci', 'acpi-power' and 'acpi-misc'Rafael J. Wysocki3-3/+26
* acpi-pci: ACPI: Fix build failure when CONFIG_NLS is set to 'n' * acpi-power: ACPI: power: Skip duplicate power resource references in _PRx * acpi-misc: ACPI: NUMA: Use correct type for printing addresses on i386-PAE
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki8-22/+82
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-11Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie3-5/+12
3 nouveau fixes: one backlight, falcon register access, and a fan fix. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
2019-01-11Merge tag 'perf-core-for-mingo-5.0-20190110' of ↵Ingo Molnar7-419/+470
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: perf trace: Ravi Bangoria: - Rework PowerPC syscall table generation, now using a .tbl file just like x86_64 and S/390, also silencing a tools build warning about headers out of sync with the kernel sources. tools include uapi: Arnaldo Carvalho de Melo: - Sync linux/if_link.h copy with the kernel sources, silencing a build warning. perf top: Arnaldo Carvalho de Melo: - Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange Pi Zero ARM board, just like with other symbols in other arches. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-01-11drm/nouveau/falcon: avoid touching registers if engine is offIlia Mirkin1-2/+5
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: Don't disable polling in fallback modeTakashi Iwai1-3/+4
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Reviewed-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: register backlight on pascal and newerBen Skeggs1-0/+3
Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11i2c: tegra: Fix Maximum transfer sizeSowjanya Komatineni1-1/+14
Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2019-01-11i2c: dev: prevent adapter retries and timeout being set as minus valueYi Zeng1-0/+6
If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng <[email protected]> [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2019-01-10qcom-scm: Include <linux/err.h> headerFabio Estevam1-0/+1
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") the DRM_MSM symbol can be selected by SOC_IMX5 causing the following error when building imx_v6_v7_defconfig: In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0: ../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr': ../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function) return -ENODEV; Include the <linux/err.h> header file to fix this problem. Reported-by: kernelci.org bot <[email protected]> Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Andy Gross <[email protected]>
2019-01-10Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linusJens Axboe6-39/+72
Pull NVMe fixes from Christoph. * 'nvme-5.0' of git://git.infradead.org/nvme: nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps
2019-01-10Merge tag 'pci-v5.0-fixes-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix Amlogic Meson host controller driver build failure (Corentin Labbe)" * tag 'pci-v5.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: amlogic: Fix build failure due to missing gpio header
2019-01-11Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie15-96/+156
into drm-fixes - Powerplay fixes - Virtual display pinning fixes - Golden register updates for vega - Pitch and gem size validation fixes - Fix for error case in sr-iov init - Disable page tables in system memory on RV due to issues with IOMMU reported on some platforms Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds19-42/+189
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10' of ↵Dave Airlie3-23/+65
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Pull request for drm-misc-fixes for v5.0-rc2: - Fixes for the tc358767 bridge to work correctly with tc358867 using a DP connector. - Make resume work on amdgpu when a DP-MST display is unplugged. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-10CIFS: Fix credit computation for compounded requestsPavel Shilovsky1-18/+41
In SMB3 protocol every part of the compound chain consumes credits individually, so we need to call wait_for_free_credits() for each of the PDUs in the chain. If an operation is interrupted, we must ensure we return all credits taken from the server structure back. Without this patch server can sometimes disconnect the session due to credit mismatches, especially when first operation(s) are large writes. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10CIFS: Do not set credits to 1 if the server didn't grant anythingPavel Shilovsky1-2/+0
Currently we reset the number of total credits granted by the server to 1 if the server didn't grant us anything int the response. This violates the SMB3 protocol - we need to trust the server and use the credit values from the response. Fix this by removing the corresponding code. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10CIFS: Fix adjustment of credits for MTU requestsPavel Shilovsky1-2/+6
Currently for MTU requests we allocate maximum possible credits in advance and then adjust them according to the request size. While we were adjusting the number of credits belonging to the server, we were skipping adjustment of credits belonging to the request. This patch fixes it by setting request credits to CreditCharge field value of SMB2 packet header. Also ask 1 credit more for async read and write operations to increase parallelism and match the behavior of other operations. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10cifs: Fix a tiny potential memory leakDan Carpenter1-0/+1
The most recent "it" allocation is leaked on this error path. I believe that small allocations always succeed in current kernels so this doesn't really affect run time. Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-10cifs: Fix a debug messageDan Carpenter1-3/+4
This debug message was never shown because it was checking for NULL returns but extract_hostname() returns error pointers. Fixes: 93d5cb517db3 ("cifs: Add support for failover in cifs_reconnect()") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Paulo Alcantara <[email protected]>
2019-01-10arm64: kpti: Avoid rewriting early page tables when KASLR is enabledWill Deacon5-5/+52
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel <[email protected]> Reported-by: John Garry <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-10Merge tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfioLinus Torvalds2-2/+2
Pull VFIO fixes from Alex Williamson: - Fix trace header include path for in-tree builds (Masahiro Yamada) - Fix overflow in unmap wrap-around test (Alex Williamson) * tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfio: vfio/type1: Fix unmap overflow off-by-one vfio/pci: set TRACE_INCLUDE_PATH to fix the build error
2019-01-10Merge tag 'sound-5.0-rc2' of ↵Linus Torvalds7-20/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for USB-audio, HD-audio and cs46xx. The USB-audio fixes are for out-of-bound accesses and a regression in the recent cleanup, while HD-audio fixes are usual device-specific quirks" * tag 'sound-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225 ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode for ALC225 ALSA: usb-audio: fix CM6206 register definitions ALSA: cs46xx: Potential NULL dereference in probe ALSA: hda/realtek - Support Dell headset mode for New AIO platform ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks ALSA: usb-audio: Always check descriptor sizes in parser code ALSA: usb-audio: Check mixer unit descriptors more strictly ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
2019-01-10Merge tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtdLinus Torvalds4-17/+43
Pull mtd fixes from Boris Brezillon: "Core MTD Fixes: - Fix a bug introduced when exposing MTD devs as NVMEM providers and check for add_mtd_device() return code everywhere raw NAND fixes: - Fix a memory corruption in the QCOM driver" * tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtd: mtd: rawnand: qcom: fix memory corruption that causes panic mtd: Check add_mtd_device() ret code mtd: Fix the check on nvmem_register() ret code
2019-01-10btrfs: Use real device structure to verify dev extentQu Wenruo1-0/+12
[BUG] Linux v5.0-rc1 will fail fstests/btrfs/163 with the following kernel message: BTRFS error (device dm-6): dev extent devid 1 physical offset 13631488 len 8388608 is beyond device boundary 0 BTRFS error (device dm-6): failed to verify dev extents against chunks: -117 BTRFS error (device dm-6): open_ctree failed [CAUSE] Commit cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent mapping check") introduced strict check on dev extents. We use btrfs_find_device() with dev uuid and fs uuid set to NULL, and only dependent on @devid to find the real device. For seed devices, we call clone_fs_devices() in open_seed_devices() to allow us search seed devices directly. However clone_fs_devices() just populates devices with devid and dev uuid, without populating other essential members, like disk_total_bytes. This makes any device returned by btrfs_find_device(fs_info, devid, NULL, NULL) is just a dummy, with 0 disk_total_bytes, and any dev extents on the seed device will not pass the device boundary check. [FIX] This patch will try to verify the device returned by btrfs_find_device() and if it's a dummy then re-search in seed devices. Fixes: cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent mapping check") CC: [email protected] # 4.19+ Reported-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-01-10gpio: pl061: handle failed allocationsNicholas Mc Guire1-1/+5
devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by: Nicholas Mc Guire <[email protected]> Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij <[email protected]>
2019-01-10tools headers powerpc: Remove unistd.hRavi Bangoria2-405/+0
We use syscall.tbl to generate system call table on powerpc. The unistd.h copy is no longer required now. Remove it. Signed-off-by: Ravi Bangoria <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-10perf powerpc: Rework syscall table generationRavi Bangoria3-14/+450
Commit aff850393200 ("powerpc: add system call table generation support") changed how systemcall table is generated for powerpc. Incorporate these changes into perf as well. Committer testing: $ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64 perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" perfbuilder@d7a7af166a80:/git/perf$ perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf make: Entering directory '/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h sh: 1: command: Illegal option -c Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory GEN /tmp/build/perf/common-cmds.h <SNIP> CC /tmp/build/perf/util/syscalltbl.o <SNIP> LD /tmp/build/perf/libperf-in.o AR /tmp/build/perf/libperf.a LINK /tmp/build/perf/perf make: Leaving directory '/git/linux/tools/perf' perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c static const char *syscalltbl_powerpc_64[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_64_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c static const char *syscalltbl_powerpc_32[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_32_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ Signed-off-by: Ravi Bangoria <[email protected]> Reported-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-10drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSRJosé Roberto de Souza1-1/+1
The DP_DPCD_QUIRK_NO_PSR comment is missing colon causing this warning when generating kernel documentation. ./include/drm/drm_dp_helper.h:1374: warning: Incorrect use of kernel-doc format: * @DP_DPCD_QUIRK_NO_PSR Fixes: 1035f4a65f58 ("drm/i915: Disable PSR in Apple panels") Cc: Dhinakaran Pandiyan <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Reviewed-by: Dhinakaran Pandiyan <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ed17b555303c74a35f226268523b1695dbd4617d) Signed-off-by: Jani Nikula <[email protected]>
2019-01-10drm/i915: init per-engine WAs for all enginesDaniele Ceraolo Spurio1-1/+2
commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds") refactored the workaround code to have functions per-engine, but didn't call any of them from logical_xcs_ring_init. Since we do have a non-RCS workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call intel_engine_init_workarounds for non-RCS engines. Note that whitelist is still RCS-only. v2: move the call to logical_ring_init (Chris) Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds") Cc: Tvrtko Ursulin <[email protected]> Cc: Chris Wilson <[email protected]> Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a60acb223fecc77531540196008ac2de89e2a162) Signed-off-by: Jani Nikula <[email protected]>
2019-01-10drm/i915: Unwind failure on pinning the gen7 ppgttChris Wilson1-3/+12
If we fail to pin the ggtt vma slot for the ppgtt page tables, we need to unwind the locals before reporting the error. Or else on subsequent attempts to bind the page tables into the ggtt, we will already believe that the vma has been pinned and continue on blithely. If something else should happen to be at that location, choas ensues. Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active") Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Matthew Auld <[email protected]> Cc: <[email protected]> # v4.19+ Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c) Signed-off-by: Jani Nikula <[email protected]>
2019-01-10drm/i915: Skip the ERR_PTR error stateChris Wilson3-13/+26
Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") applied cleanly after a 24 month hiatus, the code had moved on with new methods for peeking and fetching the captured gpu info. Make sure we catch all uses of the stashed error state and avoid dereferencing the error pointer. v2: Move error pointer determination into i915_gpu_capture_state v3: Restore early check to avoid capturing and then throwing away subsequent GPU error states. Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e6154e4cb8b0d3692f84ca0d66b4e1ba0389b134) Signed-off-by: Jani Nikula <[email protected]>
2019-01-10drm/i915: Disable PSR in Apple panelsJosé Roberto de Souza3-0/+15
i915 yet don't support PSR in Apple panels, so lets keep it disabled while we work on that. v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to DP_DPCD_QUIRK_NO_PSR (Ville) v3: Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani) Fixed typo in comment of the new quirk entry(Jani) Fixes: 598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW) Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Dhinakaran Pandiyan <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7c5c641a930ed06ca317ee39faee7d5824266348) Signed-off-by: Jani Nikula <[email protected]>
2019-01-10Merge tag 'gvt-fixes-2019-01-09' of https://github.com/intel/gvt-linux into ↵Jani Nikula2-22/+43
drm-intel-fixes gvt-fixes-2019-01-09 - Fix one race issue between pre-scan of guest workload with submission Signed-off-by: Jani Nikula <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.