aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-27Merge tag 'drm-msm-fixes-2020-08-24' of ↵Dave Airlie12-25/+99
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
2020-08-27Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie2-7/+15
into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <[email protected]> From: Lucas Stach <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-27Merge tag 'exynos-drm-fixes-v5.9-rc3' of ↵Dave Airlie2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One fixup - Just drop __iommu annotation to fix sparse warning. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-26io_uring: clear req->result on IOPOLL re-issueJens Axboe1-0/+1
Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: [email protected] Reported-by: Andres Freund <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-26Merge branch 'net-fix-netpoll-crash-with-bnxt'David S. Miller3-10/+7
Jakub Kicinski says: ==================== net: fix netpoll crash with bnxt Rob run into crashes when using XDP on bnxt. Upon investigation it turns out that during driver reconfig irq core produces a warning message when IRQs are requested. This triggers netpoll, which in turn accesses uninitialized driver state. Same crash can also be triggered on this platform by changing the number of rings. Looks like we have two missing pieces here, netif_napi_add() has to make sure we start out with netpoll blocked. The driver also has to be more careful about when napi gets enabled. Tested XDP and channel count changes, the warning message no longer causes a crash. Not sure if the memory barriers added in patch 1 are necessary, but it seems we should have them. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt: don't enable NAPI until rings are readyJakub Kicinski1-8/+4
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <[email protected]> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26net: disable netpoll on fresh napisJakub Kicinski2-2/+3
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <[email protected]> Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26ipv4: Silence suspicious RCU usage warningIdo Schimmel1-1/+2
fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression. Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held. [1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020 Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26drivers/net/wan/lapbether: Set network_header before transmittingXie He1-0/+2
Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <[email protected]> Signed-off-by: Xie He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26mptcp: free acked data before waiting for more memoryFlorian Westphal1-2/+1
After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62d3f3 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26taprio: Fix using wrong queues in gate maskVinicius Costa Gomes1-6/+24
Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26xfs: fix boundary test in xfs_attr_shortform_verifyEric Sandeen1-1/+3
The boundary test for the fixed-offset parts of xfs_attr_sf_entry in xfs_attr_shortform_verify is off by one, because the variable array at the end is defined as nameval[1] not nameval[]. Hence we need to subtract 1 from the calculation. This can be shown by: # touch file # setfattr -n root.a file and verifications will fail when it's written to disk. This only matters for a last attribute which has a single-byte name and no value, otherwise the combination of namelen & valuelen will push endp further out and this test won't fail. Fixes: 1e1bbd8e7ee06 ("xfs: create structure verifier function for shortform xattrs") Signed-off-by: Eric Sandeen <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-08-26xfs: fix off-by-one in inode alloc block reservation calculationBrian Foster2-3/+3
The inode chunk allocation transaction reserves inobt_maxlevels-1 blocks to accommodate a full split of the inode btree. A full split requires an allocation for every existing level and a new root block, which means inobt_maxlevels is the worst case block requirement for a transaction that inserts to the inobt. This can lead to a transaction block reservation overrun when tmpfile creation allocates an inode chunk and expands the inobt to its maximum depth. This problem has been observed in conjunction with overlayfs, which makes frequent use of tmpfiles internally. The existing reservation code goes back as far as the Linux git repo history (v2.6.12). It was likely never observed as a problem because the traditional file/directory creation transactions also include worst case block reservation for directory modifications, which most likely is able to make up for a single block deficiency in the inode allocation portion of the calculation. tmpfile support is relatively more recent (v3.15), less heavily used, and only includes the inode allocation block reservation as tmpfiles aren't linked into the directory tree on creation. Fix up the inode alloc block reservation macro and a couple of the block allocator minleft parameters that enforce an allocation to leave enough free blocks in the AG for a full inobt split. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-08-26xfs: finish dfops on every insert range shift iterationBrian Foster1-1/+1
The recent change to make insert range an atomic operation used the incorrect transaction rolling mechanism. The explicit transaction roll does not finish deferred operations. This means that intents for rmapbt updates caused by extent shifts are not logged until the final transaction commits. Thus if a crash occurs during an insert range, log recovery might leave the rmapbt in an inconsistent state. This was discovered by repeated runs of generic/455. Update insert range to finish dfops on every shift iteration. This is similar to collapse range and ensures that intents are logged with the transactions that make associated changes. Fixes: dd87f87d87fa ("xfs: rework insert range into an atomic operation") Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu1-2/+8
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen1-0/+1
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin1-1/+1
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher1-0/+4
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <[email protected]> Acked-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas1-6/+3
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen1-0/+1
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan3-24/+21
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou1-2/+1
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu1-1/+1
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <[email protected]> Reviewed-by: Josip Pavic <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam1-0/+1
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Joshua Aberback <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung1-1/+1
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee3-22/+43
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen1-4/+2
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan1-2/+4
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan1-2/+4
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: correct Vega10 swctf limit settingEvan Quan1-2/+5
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/pm: set VCN pg per instancesJiansong Chen1-2/+2
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/pm: enable run_btc callback for sienna_cichlidJiansong Chen1-0/+7
DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in ↵Furquan Shaikh1-0/+2
amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by: Christian König <[email protected]> Signed-off-by: Furquan Shaikh <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: Reject overlay plane configurations in multi-display scenariosNicholas Kazlauskas1-0/+8
[Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26drm/amd/display: use correct scale for actual_brightnessAlexander Monakov1-41/+40
Documentation for sysfs backlight level interface requires that values in both 'brightness' and 'actual_brightness' files are interpreted to be in range from 0 to the value given in the 'max_brightness' file. With amdgpu, max_brightness gives 255, and values written by the user into 'brightness' are internally rescaled to a wider range. However, reading from 'actual_brightness' gives the raw register value without inverse rescaling. This causes issues for various userspace tools such as PowerTop and systemd that expect the value to be in the correct range. Introduce a helper to retrieve internal backlight range. Use it to reimplement 'convert_brightness' as 'convert_brightness_from_user' and introduce 'convert_brightness_to_user'. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242 Cc: Alex Deucher <[email protected]> Cc: Nicholas Kazlauskas <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alexander Monakov <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-08-26drm/amd/display: should check error using DC_OKTong Zhang1-4/+4
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1), the caller should check error using DC_OK instead of checking against 0 Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-26iio: dpot-dac: fix code comment in dpot_dac_read_raw()Gustavo A. R. Silva1-1/+2
After the replacement of the /* fall through */ comment with the fallthrough pseudo-keyword macro, the natural reading of a code comment was broken. Fix the natural reading of such a comment and make it intelligible. Reported-by: Peter Rosin <[email protected]> Acked-by: Peter Rosin <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-26ALSA: hda/hdmi: always check pin power status in i915 pin fixupKai Vehmanen1-0/+1
When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388 Signed-off-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-08-26Merge tag 'tty-5.9-rc3' of ↵Linus Torvalds11-25/+89
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a few small TTY/Serial/vt fixes for 5.9-rc3 Included in here are: - qcom serial fixes - vt ioctl and core bugfixes - pl011 serial driver fixes - 8250 serial driver fixes - other misc serial driver fixes and for good measure: - fbcon fix for syzbot found problem. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: add dependence and build for earlycon serial: samsung: Removes the IRQ not found warning serial: 8250: change lock order in serial8250_do_startup() serial: stm32: avoid kernel warning on absence of optional IRQ serial: pl011: Fix oops on -EPROBE_DEFER serial: pl011: Don't leak amba_ports entry on driver register error serial: 8250_exar: Fix number of ports for Commtech PCIe cards tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup serial: qcom_geni_serial: Fix recent kdb hang vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize() fbcon: prevent user font height or width change from causing potential out-of-bounds access vt: defer kfree() of vc_screenbuf in vc_do_resize()
2020-08-26Merge tag 'char-misc-5.9-rc3' of ↵Linus Torvalds23-73/+226
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc and other driver subsystem fixes for 5.9-rc3. The majority of these are tiny habanalabs driver fixes, but also in here are: - speakup build fixes now that it is out of staging and got exposed to more build systems all of a sudden - mei driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: correctly report inbound pci region cfg error habanalabs: check correct vmalloc return code habanalabs: validate FW file size habanalabs: fix incorrect check on failed workqueue create habanalabs: set max power according to card type habanalabs: proper handling of alloc size in coresight habanalabs: set clock gating according to mask habanalabs: verify user input in cs_ioctl_signal_wait habanalabs: Fix a loop in gaudi_extract_ecc_info() habanalabs: Fix memory corruption in debugfs habanalabs: validate packet id during CB parse habanalabs: Validate user address before mapping habanalabs: unmap PCI bars upon iATU failure mei: hdcp: fix mei_hdcp_verify_mprime() input parameter speakup: only build serialio when ISA is enabled speakup: Fix wait_for_xmitr for ttyio case
2020-08-26Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds1-14/+51
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: "Two patches from Vineeth to improve Hyper-V timesync facility" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv_utils: drain the timesync packets on onchannelcallback hv_utils: return error if host timesysnc update is stale
2020-08-26Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-30/+35
Pull virtio bugfixes from Michael Tsirkin: "A couple vdpa and vhost bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms vhost-iotlb: fix vhost_iotlb_itree_next() documentation vdpa: ifcvf: free config irq in ifcvf_free_irq() vdpa: ifcvf: return err when fail to request config irq
2020-08-26io_uring: make offset == -1 consistent with preadv2/pwritev2Jens Axboe1-4/+9
The man page for io_uring generally claims were consistent with what preadv2 and pwritev2 accept, but turns out there's a slight discrepancy in how offset == -1 is handled for pipes/streams. preadv doesn't allow it, but preadv2 does. This currently causes io_uring to return -EINVAL if that is attempted, but we should allow that as documented. This change makes us consistent with preadv2/pwritev2 for just passing in a NULL ppos for streams if the offset is -1. Cc: [email protected] # v5.7+ Reported-by: Benedikt Ames <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-26MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainersSteve Wahl1-0/+9
Add an entry and email addresses for people at HPE who are supporting Linux on the Superdome Flex (a.k.a) UV platform. [ bp: Capitalize "linux" too :) ] Signed-off-by: Steve Wahl <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-08-26s390/vmem: fix vmem_add_range for 4-level pagingVasily Gorbik1-0/+1
The kernel currently crashes if 4-level paging is used. Add missing p4d_populate for just allocated pud entry. Fixes: 3e0d3e408e63 ("s390/vmem: consolidate vmem_add_range() and vmem_remove_range()") Reviewed-by: Gerald Schaefer <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-08-26s390: don't trace preemption in percpu macrosSven Schnelle1-14/+14
Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle <[email protected]> Reviewed-by: Vasily Gorbik <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-08-26loop: Set correct device size when using LOOP_CONFIGUREMartijn Coenen1-2/+2
The device size calculation was done before processing the loop configuration, which meant that the we set the size on the underlying block device incorrectly in case lo_offset/lo_sizelimit were set in the configuration. Delay computing the size until we've setup the device parameters correctly. Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl") Reported-by: Lennart Poettering <[email protected]> Tested-by: Yang Xu <[email protected]> Signed-off-by: Martijn Coenen <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-26nbd: restore default timeout when setting it to zeroHou Pu1-0/+2
If we configured io timeout of nbd0 to 100s. Later after we finished using it, we configured nbd0 again and set the io timeout to 0. We expect it would timeout after 30 seconds and keep retry. But in fact we could not change the timeout when we set it to 0. the timeout is still the original 100s. So change the timeout to default 30s when we set it to zero. It also behaves same as commit 2da22da57348 ("nbd: fix zero cmd timeout handling v2"). It becomes more important if we were reconfigure a nbd device and the io timeout it set to zero. Because it could take 30s to detect the new socket and thus io could be completed more quickly compared to 100s. Signed-off-by: Hou Pu <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-08-26net: cdc_ncm: Fix build errorYueHaibing1-0/+1
If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails: drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter' Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this. Reported-by: Hulk Robot <[email protected]> Fixes: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26media: media/v4l2-core: Fix kernel-infoleak in video_put_user()Peilin Ye1-23/+27
video_put_user() is copying uninitialized stack memory to userspace due to the compiler not initializing holes in the structures declared on the stack. Fix it by initializing `ev32` and `vb32` using memset(). Reported-and-tested-by: [email protected] Link: https://syzkaller.appspot.com/bug?extid=79d751604cb6f29fbf59 Cc: [email protected] Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI") Fixes: 577c89b0ce72 ("media: v4l2-core: fix v4l2_buffer handling for time64 ABI") Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.