aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-27irqchip/eznps: Fix build error for !ARC700 buildsVineet Gupta2-1/+6
eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by: kernel test robot <[email protected]> Reported-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Vineet Gupta <[email protected]>
2020-08-27ARC: show_regs: fix r12 printing and simplifyVineet Gupta1-47/+30
when working on ARC64, spotted an issue in ARCv2 reg file printing. print_reg_file() assumes contiguous reg-file whereas in ARCv2 they are not: r12 comes before r0-r11 due to hardware auto-save. Apparently this issue has been present since v2 port submission. To avoid bolting hacks for this discontinuity while looping through pt_regs, just ditching the loop and print pt_regs directly. Signed-off-by: Vineet Gupta <[email protected]>
2020-08-27rxrpc: Fix memory leak in rxkad_verify_response()Dinghao Liu1-1/+2
Fix a memory leak in rxkad_verify_response() whereby the response buffer doesn't get freed if we fail to allocate a ticket buffer. Fixes: ef68622da9cc ("rxrpc: Handle temporary errors better in rxkad security") Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-27Merge tag 'rxrpc-fixes-20200820' of ↵David S. Miller14-129/+251
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc, afs: Fix probing issues Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in rxrpc and thence the Volume Location server probing in afs: (1) Move the serial number of a received ACK into a local variable to simplify the next patch. (2) Fix the loss of RTT samples due to extra interposed ACKs causing baseline information to be discarded too early. This is a particular problem for afs when it sends a single very short call to probe a server it hasn't talked to recently. (3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen any valid samples or not. (4) Remove a field that's set/woken, but never read/waited on. (5) Expose the RTT and other probe information through procfs to make debugging of this stuff easier. (6) Fix VL rotation in afs to only use summary information from VL probing and not the probe running state (which gets clobbered when next a probe is issued). (7) Fix VL rotation to actually return the error aggregated from the probe errors. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-27hwmon: (gsc-hwmon) Scale temperature to millidegreesTim Harvey1-0/+1
The GSC registers report temperature in decidegrees celcius so we need to scale it to represent the hwmon sysfs API of millidegrees. Cc: [email protected] Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support") Signed-off-by: Tim Harvey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-08-27afs: Remove erroneous fallthough annotationDan Carpenter1-1/+0
The fall through annotation comes after a return statement so it's not reachable. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-27net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()Murali Karicheri1-6/+21
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid() - pm_runtime_get_sync() returns non zero value. This results in non zero value return to caller which will be interpreted as error. So overwrite ret with zero. - If VID matches with port VLAN VID, then set error code. - Currently when VLAN interface is deleted, all of the VLAN mc addresses are removed from ALE table, however the return values from ale function calls are not checked. These functions can return error code -ENOENT. But that shouldn't happen in a normal case. So add error print to catch the situations so that these can be investigated and addressed. return zero in these cases as these are not real error case, but only serve to catch ALE table update related issues and help address the same in the driver. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-27EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()Shiju Jose1-4/+6
After b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes a NULL pointer after the second ->probe() (aka ghes_edac_register()) which the config option causes to be called. This happens because the static variable which holds down whether the system has been scanned already, doesn't get reset in ghes_edac_unregister(). Then, on the second probe, ghes_scan_system() doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining NULL. Clear the variable and rename it to something more descriptive so that a second probe succeeds. [ bp: Rewrite commit message. ] Fixes: b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") Suggested-by: Borislav Petkov <[email protected]> Signed-off-by: Shiju Jose <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-08-27xfs: initialize the shortform attr header padding entryDarrick J. Wong1-2/+2
Don't leak kernel memory contents into the shortform attr fork. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Eric Sandeen <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-08-27net: Fix some commentsMiaohe Lin6-8/+8
Fix some comments, including wrong function name, duplicated word and so on. Signed-off-by: Miaohe Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-27net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()Himadri Pandya1-1/+1
The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: [email protected] Signed-off-by: Himadri Pandya <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-27crypto: af_alg - Work around empty control messages without MSG_MOREHerbert Xu1-3/+10
The iwd daemon uses libell which sets up the skcipher operation with two separate control messages. As the first control message is sent without MSG_MORE, it is interpreted as an empty request. While libell should be fixed to use MSG_MORE where appropriate, this patch works around the bug in the kernel so that existing binaries continue to work. We will print a warning however. A separate issue is that the new kernel code no longer allows the control message to be sent twice within the same request. This restriction is obviously incompatible with what iwd was doing (first setting an IV and then sending the real control message). This patch changes the kernel so that this is explicitly allowed. Reported-by: Caleb Jorden <[email protected]> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...") Cc: <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-08-27btrfs: tree-checker: fix the error message for transid errorQu Wenruo1-1/+1
The error message for inode transid is the same as for inode generation, which makes us unable to detect the real problem. Reported-by: Tyler Richmond <[email protected]> Fixes: 496245cac57e ("btrfs: tree-checker: Verify inode item") CC: [email protected] # 5.4+ Reviewed-by: Marcos Paulo de Souza <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: set the lockdep class for log tree extent buffersJosef Bacik1-1/+5
These are special extent buffers that get rewound in order to lookup the state of the tree at a specific point in time. As such they do not go through the normal initialization paths that set their lockdep class, so handle them appropriately when they are created and before they are locked. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: set the correct lockdep class for new nodesJosef Bacik1-1/+1
When flipping over to the rw_semaphore I noticed I'd get a lockdep splat in replace_path(), which is weird because we're swapping the reloc root with the actual target root. Turns out this is because we're using the root->root_key.objectid as the root id for the newly allocated tree block when setting the lockdep class, however we need to be using the actual owner of this new block, which is saved in owner. The affected path is through btrfs_copy_root as all other callers of btrfs_alloc_tree_block (which calls init_new_buffer) have root_objectid == root->root_key.objectid . CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Nikolay Borisov <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: allocate scrub workqueues outside of locksJosef Bacik1-52/+70
I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: fix potential deadlock in the search ioctlJosef Bacik3-14/+27
With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Not tainted ------------------------------------------------------ compsize/11122 is trying to acquire lock: ffff889fabca8768 (&mm->mmap_lock#2){++++}-{3:3}, at: __might_fault+0x3e/0x90 but task is already holding lock: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-fs-00){++++}-{3:3}: down_write_nested+0x3b/0x70 __btrfs_tree_lock+0x24/0x120 btrfs_search_slot+0x756/0x990 btrfs_lookup_inode+0x3a/0xb4 __btrfs_update_delayed_inode+0x93/0x270 btrfs_async_run_delayed_root+0x168/0x230 btrfs_work_helper+0xd4/0x570 process_one_work+0x2ad/0x5f0 worker_thread+0x3a/0x3d0 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #1 (&delayed_node->mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_delayed_update_inode+0x50/0x440 btrfs_update_inode+0x8a/0xf0 btrfs_dirty_inode+0x5b/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&mm->mmap_lock#2){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &mm->mmap_lock#2 --> &delayed_node->mutex --> btrfs-fs-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-fs-00); lock(&delayed_node->mutex); lock(btrfs-fs-00); lock(&mm->mmap_lock#2); *** DEADLOCK *** 1 lock held by compsize/11122: #0: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 17 PID: 11122 Comm: compsize Kdump: loaded Not tainted 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __might_fault+0x3e/0x90 ? find_held_lock+0x72/0x90 __might_fault+0x68/0x90 ? __might_fault+0x3e/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 ? btrfs_search_forward+0x2a6/0x360 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ? __do_sys_newfstat+0x5a/0x70 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The problem is we're doing a copy_to_user() while holding tree locks, which can deadlock if we have to do a page fault for the copy_to_user(). This exists even without my locking changes, so it needs to be fixed. Rework the search ioctl to do the pre-fault and then copy_to_user_nofault for the copying. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: drop path before adding new uuid tree entryJosef Bacik1-1/+2
With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted ------------------------------------------------------ btrfs-uuid/7955 is trying to acquire lock: ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 but task is already holding lock: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-uuid-00){++++}-{3:3}: down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_uuid_tree_add+0x89/0x2d0 btrfs_uuid_scan_kthread+0x330/0x390 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-uuid-00); lock(btrfs-root-00); lock(btrfs-uuid-00); lock(btrfs-root-00); *** DEADLOCK *** 1 lock held by btrfs-uuid/7955: #0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __btrfs_tree_read_lock+0x39/0x180 ? btrfs_root_node+0x1c/0x1d0 down_read_nested+0x3e/0x140 ? __btrfs_tree_read_lock+0x39/0x180 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 ? btree_readpage+0x20/0x20 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 This problem exists because we have two different rescan threads, btrfs_uuid_scan_kthread which creates the uuid tree, and btrfs_uuid_tree_iterate that goes through and updates or deletes any out of date roots. The problem is they both do things in different order. btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but then does a btrfs_get_fs_root() which can read from the tree_root. It's actually easy enough to not be holding the path in btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop it further down and re-start the search when we loop. So simply move the path release before we add our entry to the uuid tree. This also fixes a problem where we're holding a path open after we do btrfs_end_transaction(), which has it's own problems. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27btrfs: block-group: fix free-space bitmap thresholdMarcos Paulo de Souza2-1/+7
[BUG] After commit 9afc66498a0b ("btrfs: block-group: refactor how we read one block group item"), cache->length is being assigned after calling btrfs_create_block_group_cache. This causes a problem since set_free_space_tree_thresholds calculates the free-space threshold to decide if the free-space tree should convert from extents to bitmaps. The current code calls set_free_space_tree_thresholds with cache->length being 0, which then makes cache->bitmap_high_thresh zero. This implies the system will always use bitmap instead of extents, which is not desired if the block group is not fragmented. This behavior can be seen by a test that expects to repair systems with FREE_SPACE_EXTENT and FREE_SPACE_BITMAP, but the current code only created FREE_SPACE_BITMAP. [FIX] Call set_free_space_tree_thresholds after setting cache->length. There is now a WARN_ON in set_free_space_tree_thresholds to help preventing the same mistake to happen again in the future. Link: https://github.com/kdave/btrfs-progs/issues/251 Fixes: 9afc66498a0b ("btrfs: block-group: refactor how we read one block group item") CC: [email protected] # 5.8+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Marcos Paulo de Souza <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-08-27cpufreq: Use WARN_ON_ONCE() for invalid relationViresh Kumar1-2/+2
The relation can't be invalid here, so if it turns out to be invalid, just WARN_ON_ONCE() and return 0. Signed-off-by: Viresh Kumar <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-08-27cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()Viresh Kumar1-2/+1
"cpufreq_driver" is guaranteed to be valid here, no need to check it here. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-08-27cfg80211: Adjust 6 GHz frequency to channel conversionAmar Singhal1-3/+5
Adjust the 6 GHz frequency to channel conversion function, the other way around was previously handled. Signed-off-by: Amar Singhal <[email protected]> Link: https://lore.kernel.org/r/[email protected] [rewrite commit message, hard-code channel 2] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27mac80211: reduce packet loss event false positivesFelix Fietkau2-18/+17
When running a large number of packets per second with a high data rate and long A-MPDUs, the packet loss threshold can be reached very quickly when the link conditions change. This frequently shows up as spurious disconnects. Mitigate false positives by using a similar logic for regular stations as the one being used for TDLS, though with a more aggressive timeout. Packet loss events are only reported if no ACK was received for a second. Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27cfg80211: regulatory: reject invalid hintsJohannes Berg1-0/+3
Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27wireless: fix wrong 160/80+80 MHz settingShay Bar1-4/+11
Fix cfg80211_chandef_usable(): consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz. Based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <[email protected]> Signed-off-by: Shay Bar <[email protected]> Link: https://lore.kernel.org/r/[email protected] [reformat the code a bit and use u32_get_bits()] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27mac80211: improve AQL aggregation estimation for low data ratesFelix Fietkau1-12/+26
Links with low data rates use much smaller aggregates and are much more sensitive to latency added by bufferbloat. Tune the assumed aggregation length based on the tx rate duration. Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27mac80211: factor out code to look up the average packet length duration for ↵Felix Fietkau1-47/+74
a rate This will be used to enhance AQL estimated aggregation length Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for AQLFelix Fietkau3-6/+60
Since ieee80211_tx_info does not have enough room to encode HE rates, HE drivers use status->rate to provide rate info. Store it in struct sta_info and use it for AQL. Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-08-27Compiler Attributes: fix comment concerning GCC 4.6Luc Van Oostenryck1-1/+1
GCC 4.6 is not supported anymore, so remove a reference to it, leaving just the part about version prior GCC 5. Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2020-08-27Compiler Attributes: remove comment about sparse not supporting __has_attributeLuc Van Oostenryck1-6/+0
Sparse supports __has_attribute() since 2018-08-31, so the comment is not true anymore but more importantly is rather confusing. So remove it. Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2020-08-27Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"Pratik Rajesh Sampat1-1/+1
cpuidle stop state implementation has minor optimizations for P10 where hardware preserves more SPR registers compared to P9. The current P9 driver works for P10, although does few extra save-restores. P9 driver can provide the required power management features like SMT thread folding and core level power savings on a P10 platform. Until the P10 stop driver is available, revert the commit which allows for only P9 systems to utilize cpuidle and blocks all idle stop states for P10. CPU idle states are enabled and tested on the P10 platform with this fix. This reverts commit 8747bf36f312356f8a295a0c39ff092d65ce75ae. Fixes: 8747bf36f312 ("powerpc/powernv/idle: Replace CPU feature check with PVR check") Signed-off-by: Pratik Rajesh Sampat <[email protected]> Reviewed-by: Vaidyanathan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imcAthira Rajeev1-2/+2
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/perf: Fix crashes with generic_compat_pmu & BHRBAlexey Kardashevskiy1-5/+14
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver") Cc: [email protected] # v5.2+ Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/64s: Fix crash in load_fp_state() due to fpexc_modeMichael Ellerman1-3/+9
The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27powerpc/64s: scv entry should set PPRNicholas Piggin1-0/+4
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27Documentation/powerpc: fix malformed table in syscall64-abiRandy Dunlap1-1/+3
Fix malformed table warning in powerpc/syscall64-abi.rst by making two tables and moving the headings. Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table. Text in column margin in table line 2. =========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile --- For the scv 0 instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) =========== ============= ======================================== Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=nMichael Ellerman1-0/+2
The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by: Michael Ellerman <[email protected]> Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-27media: cedrus: Add missing v4l2_ctrl_request_hdl_put()Ezequiel Garcia1-1/+6
The check for a required control in the request was missing a call to v4l2_ctrl_request_hdl_put() in the error path. Fix it. Fixes: 50e761516f2b8c ("media: platform: Add Cedrus VPU decoder driver") Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-08-27media: vicodec: add missing v4l2_ctrl_request_hdl_put()Hans Verkuil1-0/+1
The check for a required control in the request was missing a call to v4l2_ctrl_request_hdl_put(), so the control request object was never released. Signed-off-by: Hans Verkuil <[email protected]> Fixes: 997deb811bf5 ("media: vicodec: Add support for stateless decoder.") Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-08-27x86/irq: Unbreak interrupt affinity settingThomas Gleixner1-7/+9
Several people reported that 5.8 broke the interrupt affinity setting mechanism. The consolidation of the entry code reused the regular exception entry code for device interrupts and changed the way how the vector number is conveyed from ptregs->orig_ax to a function argument. The low level entry uses the hardware error code slot to push the vector number onto the stack which is retrieved from there into a function argument and the slot on stack is set to -1. The reason for setting it to -1 is that the error code slot is at the position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax indicates that the entry came via a syscall. If it's not set to a negative value then a signal delivery on return to userspace would try to restart a syscall. But there are other places which rely on pt_regs::orig_ax being a valid indicator for syscall entry. But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the interrupt affinity setting mechanism, which was overlooked when this change was made. Moving interrupts on x86 happens in several steps. A new vector on a different CPU is allocated and the relevant interrupt source is reprogrammed to that. But that's racy and there might be an interrupt already in flight to the old vector. So the old vector is preserved until the first interrupt arrives on the new vector and the new target CPU. Once that happens the old vector is cleaned up, but this cleanup still depends on the vector number being stored in pt_regs::orig_ax, which is now -1. That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector always false. As a consequence the interrupt is moved once, but then it cannot be moved anymore because the cleanup of the old vector never happens. There would be several ways to convey the vector information to that place in the guts of the interrupt handling, but on deeper inspection it turned out that this check is pointless and a leftover from the old affinity model of X86 which supported multi-CPU affinities. Under this model it was possible that an interrupt had an old and a new vector on the same CPU, so the vector match was required. Under the new model the effective affinity of an interrupt is always a single CPU from the requested affinity mask. If the affinity mask changes then either the interrupt stays on the CPU and on the same vector when that CPU is still in the new affinity mask or it is moved to a different CPU, but it is never moved to a different vector on the same CPU. Ergo the cleanup check for the matching vector number is not required and can be removed which makes the dependency on pt_regs:orig_ax go away. The remaining check for new_cpu == smp_processsor_id() is completely sufficient. If it matches then the interrupt was successfully migrated and the cleanup can proceed. For paranoia sake add a warning into the vector assignment code to validate that the assumption of never moving to a different vector on the same CPU holds. Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs") Reported-by: Alex bykov <[email protected]> Reported-by: Avi Kivity <[email protected]> Reported-by: Alexander Graf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Alexander Graf <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-08-27x86/hotplug: Silence APIC only after all interrupts are migratedAshok Raj1-6/+20
There is a race when taking a CPU offline. Current code looks like this: native_cpu_disable() { ... apic_soft_disable(); /* * Any existing set bits for pending interrupt to * this CPU are preserved and will be sent via IPI * to another CPU by fixup_irqs(). */ cpu_disable_common(); { .... /* * Race window happens here. Once local APIC has been * disabled any new interrupts from the device to * the old CPU are lost */ fixup_irqs(); // Too late to capture anything in IRR. ... } } The fix is to disable the APIC *after* cpu_disable_common(). Testing was done with a USB NIC that provided a source of frequent interrupts. A script migrated interrupts to a specific CPU and then took that CPU offline. Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead") Reported-by: Evan Green <[email protected]> Signed-off-by: Ashok Raj <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mathias Nyman <[email protected]> Tested-by: Evan Green <[email protected]> Reviewed-by: Evan Green <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/r/[email protected]
2020-08-27USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt1-1/+1
This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <[email protected]> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Cyril Roelandt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()Tang Bin1-3/+2
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <[email protected]> Cc: stable <[email protected]> Signed-off-by: Tang Bin <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27USB: gadget: u_f: Unbreak offset calculation in VLAsAndy Shevchenko1-4/+4
Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: Brooke Basile <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-DAlan Stern1-0/+5
The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <[email protected]> Signed-off-by: Alan Stern <[email protected]> CC: <[email protected]> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-27dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()Dan Carpenter1-1/+1
The "page" pointer can be used with out being initialized. Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner1-1/+5
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27xen/xenbus: Fix granting of vmalloc'd memorySimon Leiner1-2/+8
On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27XEN uses irqdesc::irq_data_common::handler_data to store a per interruptThomas Gleixner1-8/+8
XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: [email protected] Reported-by: Roman Shaposhnik <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Roman Shaposhnik <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-08-27Merge tag 'amd-drm-fixes-5.9-2020-08-26' of ↵Dave Airlie18-116/+164
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.