aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-30mptcp: consolidate synack processing.Paolo Abeni4-29/+24
Currently the MPTCP code uses 2 hooks to process syn-ack packets, mptcp_rcv_synsent() and the sk_rx_dst_set() callback. We can drop the first, moving the relevant code into the latter, reducing the hooking into the TCP code. This is also needed by the next patch. v1 -> v2: - use local tcp sock ptr instead of casting the sk variable several times - DaveM Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-30NFS: Fix a race in __nfs_list_for_each_server()Trond Myklebust1-1/+1
The struct nfs_server gets put on the cl_superblocks list before the server->super field has been initialised, in which case the call to nfs_sb_active() will Oops. Add a check to ensure that we skip such a list entry. Fixes: 3c9e502b59fb ("NFS: Add a helper nfs_client_for_each_server()") Signed-off-by: Trond Myklebust <[email protected]>
2020-04-30x86/mm/cpa: Flush direct map alias during cpaRick Edgecombe1-4/+8
As an optimization, cpa_flush() was changed to optionally only flush the range in @cpa if it was small enough. However, this range does not include any direct map aliases changed in cpa_process_alias(). So small set_memory_() calls that touch that alias don't get the direct map changes flushed. This situation can happen when the virtual address taking variants are passed an address in vmalloc or modules space. In these cases, force a full TLB flush. Note this issue does not extend to cases where the set_memory_() calls are passed a direct map address, or page array, etc, as the primary target. In those cases the direct map would be flushed. Fixes: 935f5839827e ("x86/mm/cpa: Optimize cpa_flush_array() TLB invalidation") Signed-off-by: Rick Edgecombe <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-30Merge tag 'mmc-v5.7-rc2' of ↵Linus Torvalds6-22/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - meson-mx-sdio: Fix support for HW busy detection - sdhci-msm: Fix support for HW busy detection - cqhci: Fix polling loop by converting to readx_poll_timeout() - sdhci-xenon: Fix annoying 1.8V regulator warning - sdhci-pci: Fix eMMC driver strength for BYT-based controllers * tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers mmc: sdhci-xenon: fix annoying 1.8V regulator warning mmc: sdhci-msm: Enable host capabilities pertains to R1b response mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop mmc: meson-mx-sdio: remove the broken ->card_busy() op mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY mmc: core: make mmc_interrupt_hpi() static
2020-04-30arm64: vdso: Add -fasynchronous-unwind-tables to cflagsVincenzo Frascino1-1/+1
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables by default since gcc-8, so now the de facto platform ABI is to allow unwinding from async signal handlers. However on bare metal targets (aarch64-none-elf), and on old gcc, async and sync unwind tables are not enabled by default to avoid runtime memory costs. This means if linux is built with a baremetal toolchain the vdso.so may not have unwind tables which breaks the gcc platform ABI guarantee in userspace. Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o cflags to address the ABI change. Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation") Cc: Will Deacon <[email protected]> Reported-by: Szabolcs Nagy <[email protected]> Signed-off-by: Vincenzo Frascino <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2020-04-30block: remove the bd_openers checks in blk_drop_partitionsChristoph Hellwig1-1/+1
When replacing the bd_super check with a bd_openers I followed a logical conclusion, which turns out to be utterly wrong. When a block device has bd_super sets it has a mount file system on it (although not every mounted file system sets bd_super), but that also implies it doesn't even have partitions to start with. So instead of trying to come up with a logical check for all openers, just remove the check entirely. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Fixes: cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again") Reported-by: Michal Koutný <[email protected]> Reported-by: Yang Xu <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-30net/mlx5e: Fix q counters on uplink representorsRoi Dayan1-7/+2
Need to allocate the q counters before init_rx which needs them when creating the rq. Fixes: 8520fa57a4e9 ("net/mlx5e: Create q counters on uplink representors") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: Fix command entry leak in Internal Error StateMoshe Shemesh1-0/+4
Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: Fix forced completion access non initialized command entryMoshe Shemesh1-1/+1
mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: DR, On creation set CQ's arm_db member to right valueErez Shitrit1-1/+13
In polling mode, set arm_db member to a value that will avoid CQ event recovery by the HW. Otherwise we might get event without completion function. In addition,empty completion function to was added to protect from unexpected events. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix mutex init orderParav Pandit1-6/+6
In cited patch mutex is initialized after its used. Below call trace is observed. Fix the order to initialize the mutex early enough. Similarly follow mirror sequence during cleanup. kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock) kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938 __mutex_lock+0x7d6/0x8a0 kernel: Call Trace: kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mark_held_locks+0x55/0x70 kernel: ? __slab_free+0x274/0x400 kernel: ? lockdep_hardirqs_on+0x140/0x1d0 kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core] kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core] kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core] kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core] kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core] kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core] kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix printing wrong error valueParav Pandit1-1/+1
When mlx5_modify_header_alloc() fails, instead of printing the error value returned, current error log prints 0. Fix by printing correct error value returned by mlx5_modify_header_alloc(). Fixes: 6724e66b90ee ("net/mlx5: E-Switch, Get reg_c1 value on miss") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix error unwinding flow for steering init failureParav Pandit1-2/+2
Error unwinding is done incorrectly in the cited commit. When steering init fails, there is no need to perform steering cleanup. When vport error exists, error cleanup should be mirror of the setup routine, i.e. to perform steering cleanup before metadata cleanup. This avoids the call trace in accessing uninitialized objects which are skipped during steering_init() due to failure in steering_init(). Call trace: mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header actions 1, max supported 0 E-Switch: Failed to create restore mod header BUG: kernel NULL pointer dereference, address: 00000000000000d0 [ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core] [ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core] [ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core] [ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] [ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320 [ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 [ 677.299217] genl_rcv_msg+0x1eb/0x430 Fixes: 7983a675ba65 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe1-0/+2
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling
2020-04-30fibmap: Warn and return an error in case of block > INT_MAXRitesh Harjani2-4/+9
We better warn the fibmap user and not return a truncated and therefore an incorrect block map address if the bmap() returned block address is greater than INT_MAX (since user supplied integer pointer). It's better to pr_warn() all user of ioctl_fibmap() and return a proper error code rather than silently letting a FS corruption happen if the user tries to fiddle around with the returned block map address. We fix this by returning an error code of -ERANGE and returning 0 as the block mapping address in case if it is > INT_MAX. Now iomap_bmap() could be called from either of these two paths. Either when a user is calling an ioctl_fibmap() interface to get the block mapping address or by some filesystem via use of bmap() internal kernel API. bmap() kernel API is well equipped with handling of u64 addresses. WARN condition in iomap_bmap_actor() was mainly added to warn all the fibmap users. But now that we have directly added this warning for all fibmap users and also made sure to return 0 as block map address in case if addr > INT_MAX. So we can now remove this logic from iomap_bmap_actor(). Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-04-30dma-buf: fix documentation build warningsRandy Dunlap2-4/+3
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen1-1/+4
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <[email protected]>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter1-1/+1
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2020-04-30Merge tag 'phy-for-5.7-rc' of ↵Greg Kroah-Hartman3-12/+30
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus phy: for 5.7 -rc *) Update MAINTAINER to include Vinod Koul as co-maintainer of PHY *) Fix Kconfig dependencies in seen with PHY_TEGRA_XUSB *) Re-add "qcom,sdm845-qusb2-phy" compatible in phy-qcom-qusb2.c to make it work with existing dtbs *) Move clock enable from ->poweron() to ->init() in Qualcomm usb-hs-28nm driver to initialize HW in ->init() Signed-off-by: Kishon Vijay Abraham I <[email protected]> * tag 'phy-for-5.7-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: qualcomm: usb-hs-28nm: Prepare clocks in init MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
2020-04-30ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB IDTakashi Iwai1-1/+1
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-30KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITSMarc Zyngier2-2/+10
KVM now expects to be able to use HW-accelerated delivery of vSGIs as soon as the guest has enabled thm. Unfortunately, we only initialize the GICv4 context if we have a virtual ITS exposed to the guest. Fix it by always initializing the GICv4.1 context if it is available on the host. Fixes: 2291ff2f2a56 ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor") Reviewed-by: Zenghui Yu <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2020-04-30KVM: arm64: Save/restore sp_el0 as part of __guest_enterMarc Zyngier2-14/+26
We currently save/restore sp_el0 in C code. This is a bit unsafe, as a lot of the C code expects 'current' to be accessible from there (and the opportunity to run kernel code in HYP is specially great with VHE). Instead, let's move the save/restore of sp_el0 to the assembly code (in __guest_enter), making sure that sp_el0 is correct very early on when we exit the guest, and is preserved as long as possible to its host value when we enter the guest. Reviewed-by: Andrew Jones <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2020-04-30btrfs: fix gcc-4.8 build warning for struct initializerArnd Bergmann1-1/+1
Some older compilers like gcc-4.8 warn about mismatched curly braces in a initializer: fs/btrfs/backref.c: In function 'is_shared_data_backref': fs/btrfs/backref.c:394:9: error: missing braces around initializer [-Werror=missing-braces] struct prelim_ref target = {0}; ^ fs/btrfs/backref.c:394:9: error: (near initialization for 'target.rbnode') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-04-30KVM: arm64: Delete duplicated label in invalid_vectorFangrui Song1-1/+0
SYM_CODE_START defines \label , so it is redundant to define \label again. A redefinition at the same place is accepted by GNU as (https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=159fbb6088f17a341bcaaac960623cab881b4981) but rejected by the clang integrated assembler. Fixes: 617a2f392c92 ("arm64: kvm: Annotate assembly using modern annoations") Signed-off-by: Fangrui Song <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Tested-by: Nick Desaulniers <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/988 Link: https://lore.kernel.org/r/[email protected]
2020-04-30USB: uas: add quirk for LaCie 2Big QuadraOliver Neukum1-0/+7
This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by: Oliver Neukum <[email protected]> Reported-by: Julian Groß <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-30phy: qualcomm: usb-hs-28nm: Prepare clocks in initBjorn Andersson1-11/+21
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write the initialization sequence to the hardware, so move the clock enablement to phy init and exit. Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2020-04-30MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainerKishon Vijay Abraham I1-1/+2
Add Vinod Koul as Generic PHY Subsystem co-maintainer and move the linux-phy to a shared repository. Cc: Vinod Koul <[email protected]> Acked-By: Vinod Koul <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2020-04-30ALSA: opti9xx: shut up gcc-10 range warningArnd Bergmann2-6/+12
gcc-10 points out a few instances of suspicious integer arithmetic leading to value truncation: sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure': sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask' 351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c: In function 'snd_miro_configure': sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask' 1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~ These are all harmless here as only the low 8 bit are passed down anyway. Change the macros to inline functions to make the code more readable and also avoid the warning. Strictly speaking those functions also need locking to make the read/write pair atomic, but it seems unlikely that anyone would still run into that issue. Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-30crypto: arch/nhpoly1305 - process in explicit 4k chunksJason A. Donenfeld4-4/+4
Rather than chunking via PAGE_SIZE, this commit changes the arch implementations to chunk in explicit 4k parts, so that calculations on maximum acceptable latency don't suddenly become invalid on platforms where PAGE_SIZE isn't 4k, such as arm64. Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305") Fixes: 012c82388c03 ("crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305") Fixes: a00fa0c88774 ("crypto: arm64/nhpoly1305 - add NEON-accelerated NHPoly1305") Fixes: 16aae3595a9d ("crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305") Cc: [email protected] Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-04-30crypto: arch/lib - limit simd usage to 4k chunksJason A. Donenfeld7-30/+65
The initial Zinc patchset, after some mailing list discussion, contained code to ensure that kernel_fpu_enable would not be kept on for more than a 4k chunk, since it disables preemption. The choice of 4k isn't totally scientific, but it's not a bad guess either, and it's what's used in both the x86 poly1305, blake2s, and nhpoly1305 code already (in the form of PAGE_SIZE, which this commit corrects to be explicitly 4k for the former two). Ard did some back of the envelope calculations and found that at 5 cycles/byte (overestimate) on a 1ghz processor (pretty slow), 4k means we have a maximum preemption disabling of 20us, which Sebastian confirmed was probably a good limit. Unfortunately the chunking appears to have been left out of the final patchset that added the glue code. So, this commit adds it back in. Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function") Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Fixes: a44a3430d71b ("crypto: arm/chacha - expose ARM ChaCha routine as library function") Fixes: d7d7b8535662 ("crypto: x86/poly1305 - wire up faster implementations for kernel") Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation") Cc: Eric Biggers <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: [email protected] Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-04-29Merge branch 'wireguard-fixes'David S. Miller3-6/+5
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc4 This series contains two fixes and a cleanup for wireguard: 1) Removal of a spurious newline, from Sultan Alsawaf. 2) Fix for a memory leak in an error path, in which memory allocated prior to the error wasn't freed, reported by Sultan Alsawaf. 3) Fix to ECN support to use RFC6040 properly like all the other tunnel drivers, from Toke Høiland-Jørgensen. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: receive: use tunnel helpers for decapsulating ECN markingsToke Høiland-Jørgensen1-4/+2
WireGuard currently only propagates ECN markings on tunnel decap according to the old RFC3168 specification. However, the spec has since been updated in RFC6040 to recommend slightly different decapsulation semantics. This was implemented in the kernel as a set of common helpers for ECN decapsulation, so let's just switch over WireGuard to using those, so it can benefit from this enhancement and any future tweaks. We do not drop packets with invalid ECN marking combinations, because WireGuard is frequently used to work around broken ISPs, which could be doing that. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Olivier Tilmans <[email protected]> Cc: Dave Taht <[email protected]> Cc: Rodney W. Grimes <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: queueing: cleanup ptr_ring in error path of packet_queue_initJason A. Donenfeld1-1/+3
Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc failed, the previously allocated ptr_ring wouldn't be freed. This commit adds the missing call to ptr_ring_cleanup in the error case. Reported-by: Sultan Alsawaf <[email protected]> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: send: remove errant newline from packet_encrypt_workerSultan Alsawaf1-1/+0
This commit removes a useless newline at the end of a scope, which doesn't add anything in the way of organization or readability. Signed-off-by: Sultan Alsawaf <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before ↵Gwendal Grignou3-61/+93
claiming sensors Allocate callbacks array before enumerating the sensors: The probe routine for these sensors (for instance cros_ec_sensors_probe) can be called within the sensorhub probe routine (cros_ec_sensors_probe()) Fixes: 145d59baff594 ("platform/chrome: cros_ec_sensorhub: Add FIFO support") Signed-off-by: Gwendal Grignou <[email protected]> Reported-by: Douglas Anderson <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]>
2020-04-29HID: mcp2221: add gpiolib dependencyArnd Bergmann1-0/+1
Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Rishi Gupta <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal2-0/+5
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29HID: wacom: Report 2nd-gen Intuos Pro S center button status over BTJason Gerecke1-3/+6
The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke <[email protected]> Cc: [email protected] # v5.3+ Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29mptcp: replace mptcp_disconnect with a stubFlorian Westphal1-5/+6
Paolo points out that mptcp_disconnect is bogus: "lock_sock(sk); looks suspicious (lock should be already held by the caller) And call to: tcp_disconnect(sk, flags); too, sk is not a tcp socket". ->disconnect() gets called from e.g. inet_stream_connect when one tries to disassociate a connected socket again (to re-connect without closing the socket first). MPTCP however uses mptcp_stream_connect, not inet_stream_connect, for the mptcp-socket connect call. inet_stream_connect only gets called indirectly, for the tcp socket, so any ->disconnect() calls end up calling tcp_disconnect for that tcp subflow sk. This also explains why syzkaller has not yet reported a problem here. So for now replace this with a stub that doesn't do anything. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29netfilter: nf_osf: avoid passing pointer to local varArnd Bergmann1-5/+7
gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c29210e2 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-04-29net: dsa: mv88e6xxx: remove duplicate assignment of struct membersJason Yan1-4/+0
These struct members named 'phylink_validate' was assigned twice: static const struct mv88e6xxx_ops mv88e6190_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6190x_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390x_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6191_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6290_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; Remove all the first one and leave the second one which are been used in fact. Be aware that for 'mv88e6190x_ops' the assignment functions is different while the others are all the same. This fixes the following coccicheck warning: drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first occurrence line 3965, second occurrence line 3967 drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first occurrence line 4024, second occurrence line 4026 drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first occurrence line 4082, second occurrence line 4085 drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first occurrence line 4238, second occurrence line 4242 Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members") Signed-off-by: Jason Yan <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29regulator: Revert "Use driver_deferred_probe_timeout for ↵John Stultz1-14/+11
regulator_init_complete_work" This reverts commit dca0b44957e5 ("regulator: Use driver_deferred_probe_timeout for regulator_init_complete_work"), as we ended up reverting the default deferred_probe_timeout value back to zero, to preserve behavior with 5.6 we need to decouple the regulator timeout which was previously 30 seconds. This avoids breaking some systems that depend on the regulator timeout but don't require the deferred probe timeout. Cc: [email protected] Cc: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Saravana Kannan <[email protected]> Cc: Todd Kjos <[email protected]> Cc: Len Brown <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Ulf Hansson <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Rob Herring <[email protected]> Reported-by: Marek Szyprowski <[email protected]> Suggested-by: Mark Brown <[email protected]> Signed-off-by: John Stultz <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-29Merge tag 'riscv-for-linus-5.7-rc4' of ↵Linus Torvalds6-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef
2020-04-29Merge branch 'linus' of ↵Linus Torvalds3-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bunch of bugs detected by KASAN in the caam driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix the address of the last entry of S/G crypto: caam - fix use-after-free KASAN issue for RSA algorithms crypto: caam - fix use-after-free KASAN issue for HASH algorithms crypto: caam - fix use-after-free KASAN issue for AEAD algorithms crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms
2020-04-29HID: usbhid: Fix race between usbhid_close() and usbhid_stop()Alan Stern2-8/+30
The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29iommu: spapr_tce: Disable compile testing to fix build on book3s_32 configKrzysztof Kozlowski1-1/+1
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC configurations, its presence makes arch/powerpc/kvm/Makefile to select modules which do not build in such configuration. The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists only with CONFIG_PPC_BOOK3S_64. However these modules are selected when COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures: In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0, from arch/powerpc/kvm/book3s_64_vio_hv.c:22: arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror] #define _PAGE_EXEC 0x00001 /* execute permission */ In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0, from arch/powerpc/include/asm/book3s/pgtable.h:8, from arch/powerpc/include/asm/pgtable.h:18, from include/linux/mm.h:95, from arch/powerpc/include/asm/io.h:29, from include/linux/io.h:13, from include/linux/irq.h:20, from arch/powerpc/include/asm/hardirq.h:6, from include/linux/hardirq.h:9, from include/linux/kvm_host.h:7, from arch/powerpc/kvm/book3s_64_vio_hv.c:12: arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition #define _PAGE_EXEC 0x200 /* software: exec allowed */ Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29iommu/mediatek: Fix MTK_IOMMU dependenciesGeert Uytterhoeven1-1/+1
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config): drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap': dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot' IOMMU_DMA must not be selected, unless HAS_DMA=y. Hence fix this by making MTK_IOMMU depend on HAS_DMA. While at it, remove the dependency on ARM || ARM64, as that is already implied by the dependency on ARCH_MEDIATEK. Fixes: e93a1695d7fb5513 ("iommu: Enable compile testing for some of drivers") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29iommu: Fix the memory leak in dev_iommu_free()Kevin Hao1-0/+1
In iommu_probe_device(), we would invoke dev_iommu_free() to free the dev->iommu after the ->add_device() returns failure. But after commit 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu"), we also need to free the iommu_fwspec before the dev->iommu is freed. This fixes the following memory leak reported by kmemleak: unreferenced object 0xffff000bc836c700 (size 128): comm "swapper/0", pid 1, jiffies 4294896304 (age 782.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 d8 cd 9b ff 0b 00 ff ff ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000df34077b>] kmem_cache_alloc_trace+0x244/0x4b0 [<000000000e560ac0>] iommu_fwspec_init+0x7c/0xb0 [<0000000075eda275>] of_iommu_xlate+0x80/0xe8 [<00000000728d6bf9>] of_pci_iommu_init+0xb0/0xb8 [<00000000d001fe6f>] pci_for_each_dma_alias+0x48/0x190 [<000000006db6bbce>] of_iommu_configure+0x1ac/0x1d0 [<00000000634745f8>] of_dma_configure+0xdc/0x220 [<000000002cbc8ba0>] pci_dma_configure+0x50/0x78 [<00000000cdf6e193>] really_probe+0x8c/0x340 [<00000000fddddc46>] driver_probe_device+0x60/0xf8 [<0000000061bcdb51>] __device_attach_driver+0x8c/0xd0 [<000000009b9ff58e>] bus_for_each_drv+0x80/0xd0 [<000000004b9c8aa3>] __device_attach+0xec/0x148 [<00000000a5c13bf3>] device_attach+0x1c/0x28 [<000000005071e151>] pci_bus_add_device+0x58/0xd0 [<000000002d4f87d1>] pci_bus_add_devices+0x40/0x90 Fixes: 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu") Signed-off-by: Kevin Hao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29drm/qxl: qxl_release use after freeVasily Averin4-11/+7
qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: [email protected] Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-29drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()Vasily Averin1-1/+2
v2: removed TODO reminder Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.