| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit e78a7614f3876 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1cc5 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Turns out hotplugging CPUs that are in exclusive cpusets can lead to the
cpuset code feeding empty cpumasks to the sched domain rebuild machinery.
This leads to the following splat:
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23
Hardware name: ARM Juno development board (r0) (DT)
Workqueue: events cpuset_hotplug_workfn
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
lr : build_sched_domains (kernel/sched/topology.c:1966)
Call trace:
build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
partition_sched_domains_locked (kernel/sched/topology.c:2250)
rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019)
rebuild_sched_domains (kernel/cgroup/cpuset.c:1032)
cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2))
process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274)
worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416)
kthread (kernel/kthread.c:255)
ret_from_fork (arch/arm64/kernel/entry.S:1167)
Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853)
The faulty line in question is:
cap = arch_scale_cpu_capacity(cpumask_first(cpu_map));
and we're not checking the return value against nr_cpu_ids (we shouldn't
have to!), which leads to the above.
Prevent generate_sched_domains() from returning empty cpumasks, and add
some assertion in build_sched_domains() to scream bloody murder if it
happens again.
The above splat was obtained on my Juno r0 with the following reproducer:
$ cgcreate -g cpuset:asym
$ cgset -r cpuset.cpus=0-3 asym
$ cgset -r cpuset.mems=0 asym
$ cgset -r cpuset.cpu_exclusive=1 asym
$ cgcreate -g cpuset:smp
$ cgset -r cpuset.cpus=4-5 smp
$ cgset -r cpuset.mems=0 smp
$ cgset -r cpuset.cpu_exclusive=1 smp
$ cgset -r cpuset.sched_load_balance=0 .
$ echo 0 > /sys/devices/system/cpu/cpu4/online
$ echo 0 > /sys/devices/system/cpu/cpu5/online
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: 05484e098448 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that a UDC will
crash or hang when trying to handle a non-zero-length usb_request for
such an endpoint. Indeed, dummy-hcd gets a divide error when trying
to calculate the remainder of a transfer length by the maxpacket
value, as discovered by the syzbot fuzzer.
Currently the gadget core does not check for endpoints having a
maxpacket value of 0. This patch adds a check to usb_ep_enable(),
preventing such endpoints from being used.
As far as I know, none of the gadget drivers in the kernel tries to
create an endpoint with maxpacket = 0, but until now there has been
nothing to prevent userspace programs under gadgetfs or configfs from
doing it.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: [email protected]
CC: <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
PRCM_PWROFF_GATING_REG has CPU0 at bit 4 on A83T. So without this
patch, instead of gating the CPU0, the whole cluster was power gated,
when shutting down first CPU in the cluster.
Fixes: 6961275e72a8c1 ("ARM: sun8i: smp: Add support for A83T")
Signed-off-by: Ondrej Jirman <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Cc: [email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Without enabling keep-power-in-suspend, we can't wake the device
up using WOL packet, and the log is flooded with these messages
on resume:
sunxi-mmc 1c10000.mmc: send stop command failed
sunxi-mmc 1c10000.mmc: data error, sending stop command
sunxi-mmc 1c10000.mmc: send stop command failed
sunxi-mmc 1c10000.mmc: data error, sending stop command
So to make the WiFi really a wakeup-source, we need to keep it powered
during suspend.
Fixes: 0e23372080def7 ("arm: dts: sun8i: Add the TBS A711 tablet devicetree")
Signed-off-by: Ondrej Jirman <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The zero'ing of bits 16 and 18 is incorrect. Currently the code
is masking with the bitwise-and of BIT(16) & BIT(18) which is
0, so the updated value for val is always zero. Fix this by bitwise
and-ing value with the correct mask that will zero bits 16 and 18.
Addresses-Coverity: (" Suspicious &= or |= constant expression")
Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
r375326 in Clang exposes an issue with operator precedence in
sunxi_div_clk_setup:
drivers/clk/sunxi/clk-sunxi.c:1083:30: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
data->div[i].critical ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '|' expression to silence this warning
data->div[i].critical ?
^
)
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '?:' expression to evaluate it first
data->div[i].critical ?
^
(
1 warning generated.
It appears that the intention was for ?: to be evaluated first so that
CLK_IS_CRITICAL could be added to clkflags if the critical boolean was
set; right now, | is being evaluated first. Add parentheses around the
?: block to have it be evaluated first.
Fixes: 9919d44ff297 ("clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks")
Link: https://github.com/ClangBuiltLinux/linux/issues/745
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The ultravisor will do an integrity check of the kernel image but we
relocated it so the check will fail. Restore the original image by
relocating it back to the kernel virtual base address.
This works because during build vmlinux is linked with an expected
virtual runtime address of KERNELBASE.
Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Thiago Jung Bauermann <[email protected]>
Tested-by: Michael Anderson <[email protected]>
[mpe: Add IS_ENABLED() to fix the CONFIG_RELOCATABLE=n build]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In shutdown/reboot paths, the timer is not stopped:
qla2x00_shutdown
pci_device_shutdown
device_shutdown
kernel_restart_prepare
kernel_restart
sys_reboot
This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.
Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicholas Piggin <[email protected]>
Acked-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
After introducing "samples" to the calculation of wait time, the
driver might timeout at the regmap_field_read_poll_timeout call,
because the wait time could be longer than the 100000 usec limit
due to a large "samples" number.
So this patch sets the timeout limit to 2 times of the wait time
in order to fix this issue.
Fixes: 5c090abf945b ("hwmon: (ina3221) Add averaging mode support")
Signed-off-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The struct clk_ops enable callback for the aspeed gates mixes up the set
to clear and write to set registers.
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
* Fix free/alloc race for OGM and OGMv2, by Sven Eckelmann (2 patches)
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
lan78xx_status() will run with interrupts enabled due to the change in
ed194d136769 ("usb: core: remove local_irq_save() around ->complete()
handler"). generic_handle_irq() expects to be run with IRQs disabled.
[ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts
[ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168
[ 4.896294] 000: Modules linked in:
[ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[ 4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO)
[ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[ 4.896339] 000: sp : ffff000010003cc0
[ 4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060
[ 4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b
[ 4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400
[ 4.896373] 000: x23: 000000000000004f x22: ffff000010003d64
[ 4.896381] 000: x21: 0000000000000000 x20: 0000000000000002
[ 4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060
[ 4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb
[ 4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465
[ 4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0
[ 4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08
[ 4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920
[ 4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00
[ 4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510
[ 4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000
[ 4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000
[ 4.896466] 000: Call trace:
[ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168
[ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0
[ 4.896489] 000: handle_irq_event+0x40/0x98
[ 4.896497] 000: handle_simple_irq+0xa4/0xf0
[ 4.896505] 000: generic_handle_irq+0x24/0x38
[ 4.896513] 000: intr_complete+0xb0/0xe0
[ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8
[ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170
[ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128
[ 4.896549] 000: tasklet_hi_action+0x24/0x30
[ 4.896556] 000: __do_softirq+0x120/0x23c
[ 4.896564] 000: irq_exit+0xb8/0xd8
[ 4.896571] 000: __handle_domain_irq+0x64/0xb8
[ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[ 4.896586] 000: el1_irq+0xb8/0x140
[ 4.896592] 000: arch_cpu_idle+0x10/0x18
[ 4.896601] 000: do_idle+0x200/0x280
[ 4.896608] 000: cpu_startup_entry+0x20/0x28
[ 4.896615] 000: rest_init+0xb4/0xc0
[ 4.896623] 000: arch_call_rest_init+0xc/0x14
[ 4.896632] 000: start_kernel+0x454/0x480
Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: Woojung Huh <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Jisheng Zhang <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: David Miller <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
An earlier bugfix introduced a dependency on CONFIG_NET_SCH_TAPRIO,
but this missed the case of NET_SCH_TAPRIO=m and NET_DSA_SJA1105=y,
which still causes a link error:
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x5c): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x3b4): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x6ec): undefined reference to `taprio_offload_free'
Change the dependency to only allow selecting the TAS code when it
can link against the taprio code.
Fixes: a8d570de0cc6 ("net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS")
Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).
This moves the calculation of the checksum & vlan tags to
before the DMA mapping.
This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: Vijay Khemka <[email protected]>
Tested-by: Vijay Khemka <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user. The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.
Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.
[2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
...
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
sock_xmit.isra.24+0xa1/0x170 [nbd]
nbd_send_cmd+0x1d2/0x690 [nbd]
nbd_queue_rq+0x1b5/0x3b0 [nbd]
__blk_mq_try_issue_directly+0x108/0x1b0
blk_mq_request_issue_directly+0xbd/0xe0
blk_mq_try_issue_list_directly+0x41/0xb0
blk_mq_sched_insert_requests+0xa2/0xe0
blk_mq_flush_plug_list+0x205/0x2a0
blk_flush_plug_list+0xc3/0xf0
[1] blk_finish_plug+0x21/0x2e
_xfs_buf_ioapply+0x313/0x460
__xfs_buf_submit+0x67/0x220
xfs_buf_read_map+0x113/0x1a0
xfs_trans_read_buf_map+0xbf/0x330
xfs_btree_read_buf_block.constprop.42+0x95/0xd0
xfs_btree_lookup_get_block+0x95/0x170
xfs_btree_lookup+0xcc/0x470
xfs_bmap_del_extent_real+0x254/0x9a0
__xfs_bunmapi+0x45c/0xab0
xfs_bunmapi+0x15/0x30
xfs_itruncate_extents_flags+0xca/0x250
xfs_free_eofblocks+0x181/0x1e0
xfs_fs_destroy_inode+0xa8/0x1b0
destroy_inode+0x38/0x70
dispose_list+0x35/0x50
prune_icache_sb+0x52/0x70
super_cache_scan+0x120/0x1a0
do_shrink_slab+0x120/0x290
shrink_slab+0x216/0x2b0
shrink_node+0x1b6/0x4a0
do_try_to_free_pages+0xc6/0x370
try_to_free_mem_cgroup_pages+0xe3/0x1e0
try_charge+0x29e/0x790
mem_cgroup_charge_skmem+0x6a/0x100
__sk_mem_raise_allocated+0x18e/0x390
__sk_mem_schedule+0x2a/0x40
[0] tcp_sendmsg_locked+0x8eb/0xe10
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x26d/0x2b0
__sys_sendmsg+0x57/0xa0
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule(). It already calculated how many bytes can
be fit into current->page_frag. Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path. Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().
nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress. However, this
confused sk_page_frag() called from [2]. Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].
After [2] used current->page_frag, the offset would be increased by
the used amount. When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.
Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.
v2: Eric didn't like gfp flags being tested twice. Introduce a new
helper gfpflags_normal_context() and combine the two tests.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Josef Bacik <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
|
|
KCSAN reported a data-race in udp_set_dev_scratch() [1]
The issue here is that we must not write over skb fields
if skb is shared. A similar issue has been fixed in commit
89c22d8c3b27 ("net: Fix skb csum races when peeking")
While we are at it, use a helper only dealing with
udp_skb_scratch(skb)->csum_unnecessary, as this allows
udp_set_dev_scratch() to be called once and thus inlined.
[1]
BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg
write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1:
udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308
__first_packet_length+0x147/0x420 net/ipv4/udp.c:1556
first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579
udp_poll+0xea/0x110 net/ipv4/udp.c:2720
sock_poll+0xed/0x250 net/socket.c:1256
vfs_poll include/linux/poll.h:90 [inline]
do_select+0x7d0/0x1020 fs/select.c:534
core_sys_select+0x381/0x550 fs/select.c:677
do_pselect.constprop.0+0x11d/0x160 fs/select.c:759
__do_sys_pselect6 fs/select.c:784 [inline]
__se_sys_pselect6 fs/select.c:769 [inline]
__x64_sys_pselect6+0x12e/0x170 fs/select.c:769
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0:
udp_skb_csum_unnecessary include/net/udp.h:358 [inline]
udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310
inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Paolo Abeni <[email protected]>
Reviewed-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch corrects the SPDX License Identifier style in
header files related to DPAA2 Ethernet driver supporting
Freescale SoCs with DPAA2. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Eric Dumazet says:
====================
net: avoid KCSAN splats
Often times we use skb_queue_empty() without holding a lock,
meaning that other cpus (or interrupt) can change the queue
under us. This is fine, but we need to properly annotate
the lockless intent to make sure the compiler wont over
optimize things.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
__skb_wait_for_more_packets() can be called while other cpus
can feed packets to the socket receive queue.
KCSAN reported :
BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb
write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0:
__skb_insert include/linux/skbuff.h:1852 [inline]
__skb_queue_before include/linux/skbuff.h:1958 [inline]
__skb_queue_tail include/linux/skbuff.h:1991 [inline]
__udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470
__udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
__udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1:
__skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100
__skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683
udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()
Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
syzbot reported a data-race [1].
We should use skb_queue_empty_lockless() to document that we are
not ensuring a mutual exclusion and silence KCSAN.
[1]
BUG: KCSAN: data-race in __skb_recv_udp / __udp_enqueue_schedule_skb
write to 0xffff888122474b50 of 8 bytes by interrupt on cpu 0:
__skb_insert include/linux/skbuff.h:1852 [inline]
__skb_queue_before include/linux/skbuff.h:1958 [inline]
__skb_queue_tail include/linux/skbuff.h:1991 [inline]
__udp_enqueue_schedule_skb+0x2c1/0x410 net/ipv4/udp.c:1470
__udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
__udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
read to 0xffff888122474b50 of 8 bytes by task 8921 on cpu 1:
skb_queue_empty include/linux/skbuff.h:1494 [inline]
__skb_recv_udp+0x18d/0x500 net/ipv4/udp.c:1653
udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 8921 Comm: syz-executor.4 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some paths call skb_queue_empty() without holding
the queue lock. We must use a barrier in order
to not let the compiler do strange things, and avoid
KCSAN splats.
Adding a barrier in skb_queue_empty() might be overkill,
I prefer adding a new helper to clearly identify
points where the callers might be lockless. This might
help us finding real bugs.
The corresponding WRITE_ONCE() should add zero cost
for current compilers.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Small fixes for ARC:
- perf fix for Big Endian build [Alexey]
- hadk platform enable soem peripherals [Eugeniy]"
* tag 'arc-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: perf: Accommodate big-endian CPU
ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC
ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
|
|
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux,
we need to establish a reserved memory region for them, so that drivers
that wish to use the legacy I/O BARs can issue reads and writes against
a memory region that is mapped to the host PCIe controller's I/O BAR
mapping.
Signed-off-by: Yash Shah <[email protected]>
Signed-off-by: Paul Walmsley <[email protected]>
|
|
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes: 1dad0ebeea1c ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dakshaja Uppalapati <[email protected]>
Signed-off-by: Potnuri Bharat Teja <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The mkey_table xarray is touched by the reg_mr_callback() function which
is called from a hard irq. Thus all other uses of xa_lock must use the
_irq variants.
WARNING: inconsistent lock state
5.4.0-rc1 #12 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
python3/343 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888182be1d40 (&(&xa->xa_lock)->rlock#3){?.-.}, at: xa_erase+0x12/0x30
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xe1/0x200
_raw_spin_lock_irqsave+0x35/0x50
reg_mr_callback+0x2dd/0x450 [mlx5_ib]
mlx5_cmd_exec_cb_handler+0x2c/0x70 [mlx5_core]
mlx5_cmd_comp_handler+0x355/0x840 [mlx5_core]
[..]
Possible unsafe locking scenario:
CPU0
----
lock(&(&xa->xa_lock)->rlock#3);
<Interrupt>
lock(&(&xa->xa_lock)->rlock#3);
*** DEADLOCK ***
2 locks held by python3/343:
#0: ffff88818eb4bd38 (&uverbs_dev->disassociate_srcu){....}, at: ib_uverbs_ioctl+0xe5/0x1e0 [ib_uverbs]
#1: ffff888176c76d38 (&file->hw_destroy_rwsem){++++}, at: uobj_destroy+0x2d/0x90 [ib_uverbs]
stack backtrace:
CPU: 3 PID: 343 Comm: python3 Not tainted 5.4.0-rc1 #12
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x86/0xca
print_usage_bug.cold.50+0x2e5/0x355
mark_lock+0x871/0xb50
? match_held_lock+0x20/0x250
? check_usage_forwards+0x240/0x240
__lock_acquire+0x7de/0x23a0
? __kasan_check_read+0x11/0x20
? mark_lock+0xae/0xb50
? mark_held_locks+0xb0/0xb0
? find_held_lock+0xca/0xf0
lock_acquire+0xe1/0x200
? xa_erase+0x12/0x30
_raw_spin_lock+0x2a/0x40
? xa_erase+0x12/0x30
xa_erase+0x12/0x30
mlx5_ib_dealloc_mw+0x55/0xa0 [mlx5_ib]
uverbs_dealloc_mw+0x3c/0x70 [ib_uverbs]
uverbs_free_mw+0x1a/0x20 [ib_uverbs]
destroy_hw_idr_uobject+0x49/0xa0 [ib_uverbs]
[..]
Fixes: 0417791536ae ("RDMA/mlx5: Add missing synchronize_srcu() for MW cases")
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
segments")
Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"),
copying a similar commit for usb-storage, attempted to solve a problem
involving scatter-gather I/O and USB/IP by setting the
virt_boundary_mask for mass-storage devices.
However, it now turns out that the analogous change in usb-storage
interacted badly with commit 09324d32d2a0 ("block: force an unlimited
segment size on queues with a virt boundary"), which was added later.
A typical error message is:
ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
total 32768 (slots), used 97 (slots)
There is no longer any reason to keep the virt_boundary_mask setting
in the uas driver. It was needed in the first place only for
handling devices with a block size smaller than the maxpacket size and
where the host controller was not capable of fully general
scatter-gather operation (that is, able to merge two SG segments into
a single USB packet). But:
High-speed or slower connections never use a bulk maxpacket
value larger than 512;
The SCSI layer does not handle block devices with a block size
smaller than 512 bytes;
All the host controllers capable of SuperSpeed operation can
handle fully general SG;
Since commit ea44d190764b ("usbip: Implement SG support to
vhci-hcd and stub driver") was merged, the USB/IP driver can
also handle SG.
Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask. So in order to head
off potential problems similar to those affecting usb-storage, this
patch reverts commit 3ae62a42090f.
Signed-off-by: Alan Stern <[email protected]>
CC: Oliver Neukum <[email protected]>
CC: <[email protected]>
Acked-by: Christoph Hellwig <[email protected]>
Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
virt_boundary_mask to avoid SG overflows")
Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG
overflows") attempted to solve a problem involving scatter-gather I/O
and USB/IP by setting the virt_boundary_mask for mass-storage devices.
However, it now turns out that this interacts badly with commit
09324d32d2a0 ("block: force an unlimited segment size on queues with a
virt boundary"), which was added later. A typical error message is:
ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
total 32768 (slots), used 97 (slots)
There is no longer any reason to keep the virt_boundary_mask setting
for usb-storage. It was needed in the first place only for handling
devices with a block size smaller than the maxpacket size and where
the host controller was not capable of fully general scatter-gather
operation (that is, able to merge two SG segments into a single USB
packet). But:
High-speed or slower connections never use a bulk maxpacket
value larger than 512;
The SCSI layer does not handle block devices with a block size
smaller than 512 bytes;
All the host controllers capable of SuperSpeed operation can
handle fully general SG;
Since commit ea44d190764b ("usbip: Implement SG support to
vhci-hcd and stub driver") was merged, the USB/IP driver can
also handle SG.
Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask. So in order to fix
the swiotlb problem, this patch reverts commit 747668dbc061.
Reported-and-tested-by: Piergiorgio Sartor <[email protected]>
Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2
Signed-off-by: Alan Stern <[email protected]>
CC: Seth Bollinger <[email protected]>
CC: <[email protected]>
Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
Acked-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
iso_buffer should be set to NULL after use and free in the while loop.
In the case of isochronous URB in the while loop, iso_buffer is
allocated and after sending it to server, buffer is deallocated. And
then, if the next URB in the while loop is not a isochronous pipe,
iso_buffer still holds the previously deallocated buffer address and
kfree tries to free wrong buffer address.
Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: kbuild test robot <[email protected]>
Reported-by: Julia Lawall <[email protected]>
Signed-off-by: Suwan Kim <[email protected]>
Reviewed-by: Julia Lawall <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It looks like some of the xhci debug code is passing u32 to functions
directly from __le32/__le64 fields.
Fix this by using le{32,64}_to_cpu() on these to fix the following
sparse warnings;
xhci-debugfs.c:205:62: warning: incorrect type in argument 1 (different base types)
xhci-debugfs.c:205:62: expected unsigned int [usertype] field0
xhci-debugfs.c:205:62: got restricted __le32
xhci-debugfs.c:206:62: warning: incorrect type in argument 2 (different base types)
xhci-debugfs.c:206:62: expected unsigned int [usertype] field1
xhci-debugfs.c:206:62: got restricted __le32
...
[Trim down commit message, sparse warnings were similar -Mathias]
Cc: <[email protected]> # 4.15+
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The arguments to queue_trb are always byteswapped to LE for placement in
the ring, but this should not happen in the case of immediate data; the
bytes copied out of transfer_buffer are already in the correct order.
Add a complementary byteswap so the bytes end up in the ring correctly.
This was observed on BE ppc64 with a "Texas Instruments TUSB73x0
SuperSpeed USB 3.0 xHCI Host Controller [104c:8241]" as a ch341
usb-serial adapter ("1a86:7523 QinHeng Electronics HL-340 USB-Serial
adapter") always transmitting the same character (generally NUL) over
the serial link regardless of the key pressed.
Cc: <[email protected]> # 5.2+
Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support")
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
commit ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") schedules work
to clear TT buffer, but causes a use-after-free regression at the same time
Make sure hub_tt_work finishes before endpoint is disabled, otherwise
the work will dereference already freed endpoint and device related
pointers.
This was triggered when usb core failed to read the configuration
descriptor of a FS/LS device during enumeration.
xhci driver queued clear_tt_work while usb core freed and reallocated
a new device for the next enumeration attempt.
EHCI driver implents ehci_endpoint_disable() that makes sure
clear_tt_work has finished before it returns, but xhci lacks this support.
usb core will call hcd->driver->endpoint_disable() callback before
disabling endpoints, so we want this in xhci as well.
The added xhci_endpoint_disable() is based on ehci_endpoint_disable()
Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer")
Cc: <[email protected]> # v5.3
Reported-by: Johan Hovold <[email protected]>
Suggested-by: Johan Hovold <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
USB control-message timeouts are specified in milliseconds, not jiffies.
Waiting 83 minutes for a transfer to complete is a bit excessive.
Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <[email protected]> # 2.6.13
Reported-by: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A recent info-leak bug manifested itself along with warning about a
negative buffer overflow:
ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped
when it was really a rather large positive one.
A sanity check that prevents this has now been put in place, but let's
fix up the size format specifiers, which should all be unsigned.
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The custom ring-buffer implementation was merged without any locking or
explicit memory barriers, but a spinlock was later added by commit
9d33efd9a791 ("USB: ldusb bugfix").
The lock did not cover the update of the tail index once the entry had
been processed, something which could lead to memory corruption on
weakly ordered architectures or due to compiler optimisations.
Specifically, a completion handler running on another CPU might observe
the incremented tail index and update the entry before ld_usb_read() is
done with it.
Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Fixes: 9d33efd9a791 ("USB: ldusb bugfix")
Cc: stable <[email protected]> # 2.6.13
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.
Currently the USB core does not check for endpoints having a maxpacket
value of 0. This patch adds a check, printing a warning and skipping
over any endpoints it catches.
Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.4-rc5
Not much here, only 14 commits in different drivers.
As for the specifics, Roger Quadros fixed an important bug in cdns3
where the driver was making decisions about data pull-up management
behind the UDC framework's back.
The Atmel UDC got a fix for interrupt storm in FIFO mode, this was done
by Cristian Brisan.
Apart from these, we have the usual set of non-critical fixes.
Signed-off-by: Felipe Balbi <[email protected]>
* tag 'fixes-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: cdns3: gadget: Don't manage pullups
usb: dwc3: remove the call trace of USBx_GFLADJ
usb: gadget: configfs: fix concurrent issue between composite APIs
usb: dwc3: pci: prevent memory leak in dwc3_pci_probe
usb: gadget: composite: Fix possible double free memory bug
usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.
usb: renesas_usbhs: fix type of buf
usb: renesas_usbhs: Fix warnings in usbhsg_recip_handler_std_set_device()
usb: gadget: udc: renesas_usb3: Fix __le16 warnings
usb: renesas_usbhs: fix __le16 warnings
usb: cdns3: include host-export,h for cdns3_host_init
usb: mtu3: fix missing include of mtu3_dr.h
usb: fsl: Check memory resource before releasing it
usb: dwc3: select CONFIG_REGMAP_MMIO
|
|
into arm/fixes
Reset controller fixes for v5.5
This tag fixes a memory leak in reset_control_array_put(), which is
called by reset_control_put() for reset array controls. The other
patches are small kerneldoc comment fixes to avoid documentation build
warnings.
* tag 'reset-fixes-for-v5.5' of git://git.pengutronix.de/git/pza/linux:
reset: fix reset_control_ops kerneldoc comment
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
syzkaller reported an issue where it looks like a malicious app can
trigger a use-after-free of reading the ctx ->sq_array and ->rings
value right after having installed the ring fd in the process file
table.
Defer ring fd installation until after we're done reading those
values.
Fixes: 75b28affdd6a ("io_uring: allocate the two rings together")
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
It is not allowed to sleep to early in the boot process and this may lead
to kernel issues if the bootloader didn't prepare the slow clock and main
clock.
This results in the following error and dump stack on the AriettaG25:
bad: scheduling from the idle thread!
Ensure it is possible to sleep, else simply have a delay.
Reported-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver")
Tested-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- HID++ device support regression fixes (race condition during cleanup,
device detection fix, opps fix) from Andrey Smirnov
- disable PM on i2c-hid, as it's causing problems with a lot of
devices; other OSes apparently don't implement/enable it either; from
Kai-Heng Feng
- error handling fix in intel-ish driver, from Zhang Lixu
- syzbot fuzzer fix for HID core code from Alan Stern
- a few other tiny fixups (printk message cleanup, new device ID)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: i2c-hid: add Trekstor Primebook C11B to descriptor override
HID: logitech-hidpp: do all FF cleanup in hidpp_ff_destroy()
HID: logitech-hidpp: rework device validation
HID: logitech-hidpp: split g920_get_config()
HID: i2c-hid: Remove runtime power management
HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
HID: google: add magnemite/masterball USB ids
HID: Fix assumption that devices have inputs
HID: prodikeys: make array keys static const, makes object smaller
HID: fix error message in hid_open_report()
|
|
max98090 spec states that chip needs to be in turned-on state to supply
mic bias. Enable SHDN dapm widget along with MICBIAS widget to
actually turn on mic bias for proper headset button detection.
This is similar to cht_ti_jack_event in
sound/soc/intel/boards/cht_bsw_max98090_ti.c.
Note that due to ts3a227e reports the jack event right away before the
notifier is registered, if headset is plugged on boot, headset button
will not get detected until headset is unplugged and plugged. This is
still an issue to be fixed.
Signed-off-by: Cheng-Yi Chiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
When non standard names are used it is possible that one of the directions
are not provided, thus the flags needs to be present to tell the core that
we have half duplex setup.
Fixes: 642aafea8889 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In the implementation of sof_set_get_large_ctrl_data() there is a memory
leak in case an error. Release partdata if sof_get_ctrl_copy_params()
fails.
Fixes: 54d198d5019d ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly")
Signed-off-by: Navid Emamdoost <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In the implementation of sof_dfsentry_write() memory allocated for
string is leaked in case of an error. Go to error handling path if the
d_name.name is not valid.
Fixes: 091c12e1f50c ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Navid Emamdoost <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|