| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Relax qspi pins slew-rate to minimize peak currents.
Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board")
Signed-off-by: Patrice Chotard <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
Add TLS TX counter description for the handshake retransmitted
packets that triggers the resync procedure then skip it, going
into the regular transmit flow.
Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow")
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a couple of READ_ONCE() and WRITE_ONCE() to prevent
load-tearing and store-tearing in sock_read_timestamp()
and sock_write_timestamp()
This might prevent another KCSAN report.
Fixes: 3a0ed3e96197 ("sock: Make sock->sk_stamp thread-safe")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Deepa Dinamani <[email protected]>
Acked-by: Deepa Dinamani <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
During the exit/unregistration process of the RmNet driver, the function
rmnet_unregister_real_device() is called to handle freeing the driver's
internal state and removing the RX handler on the underlying physical
device. However, the order of operations this function performs is wrong
and can lead to a use after free of the rmnet_port structure.
Before calling netdev_rx_handler_unregister(), this port structure is
freed with kfree(). If packets are received on any RmNet devices before
synchronize_net() completes, they will attempt to use this already-freed
port structure when processing the packet. As such, before cleaning up any
other internal state, the RX handler must be unregistered in order to
guarantee that no further packets will arrive on the device.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
sk_msg_trim() tries to only update curr pointer if it falls into
the trimmed region. The logic, however, does not take into the
account pointer wrapping that sk_msg_iter_var_prev() does nor
(as John points out) the fact that msg->sg is a ring buffer.
This means that when the message was trimmed completely, the new
curr pointer would have the value of MAX_MSG_FRAGS - 1, which is
neither smaller than any other value, nor would it actually be
correct.
Special case the trimming to 0 length a little bit and rework
the comparison between curr and end to take into account wrapping.
This bug caused the TLS code to not copy all of the message, if
zero copy filled in fewer sg entries than memcopy would need.
Big thanks to Alexander Potapenko for the non-KMSAN reproducer.
v2:
- take into account that msg->sg is a ring buffer (John).
Link: https://lore.kernel.org/netdev/[email protected]/ (v1)
Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Reported-by: [email protected]
Reported-by: [email protected]
Co-developed-by: John Fastabend <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The reason for the pre-allocation of one CQE is to enable resizing of
the CQ.
Fix comment accordingly.
Signed-off-by: Dotan Barak <[email protected]>
Signed-off-by: Eli Cohen <[email protected]>
Signed-off-by: Vladimir Sokolovsky <[email protected]>
Signed-off-by: Yuval Shaia <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With the DSA core doing the call to dsa_port_disable() we do not need to
do that within the driver itself. This could cause an use after free
since past dsa_unregister_switch() we should not be accessing any
dsa_switch internal structures.
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a new filter is added to cls_api, the function
tcf_chain_tp_insert_unique() looks up the protocol/priority/chain to
determine if the tcf_proto is duplicated in the chain's hashtable. It then
creates a new entry or continues with an existing one. In cls_flower, this
allows the function fl_ht_insert_unque to determine if a filter is a
duplicate and reject appropriately, meaning that the duplicate will not be
passed to drivers via the offload hooks. However, when a tcf_proto is
destroyed it is removed from its chain before a hardware remove hook is
hit. This can lead to a race whereby the driver has not received the
remove message but duplicate flows can be accepted. This, in turn, can
lead to the offload driver receiving incorrect duplicate flows and out of
order add/delete messages.
Prevent duplicates by utilising an approach suggested by Vlad Buslov. A
hash table per block stores each unique chain/protocol/prio being
destroyed. This entry is only removed when the full destroy (and hardware
offload) has completed. If a new flow is being added with the same
identiers as a tc_proto being detroyed, then the add request is replayed
until the destroy is complete.
Fixes: 8b64678e0af8 ("net: sched: refactor tp insert/delete for concurrent execution")
Signed-off-by: John Hurley <[email protected]>
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reported-by: Louis Peens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch corrects the SPDX License Identifier style in
header files related to Hisilicon network devices. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since de77ecd4ef02 ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.
Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding. This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.
The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL. On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN. The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.
Resolve this by combining the two variables into one.
Reported-by: Aleksei Zakharov <[email protected]>
Reported-by: Sha Zhang <[email protected]>
Cc: Mahesh Bandewar <[email protected]>
Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-02
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 6 day(s) which contain
a total of 8 files changed, 35 insertions(+), 9 deletions(-).
The main changes are:
1) Fix ppc BPF JIT's tail call implementation by performing a second pass
to gather a stable JIT context before opcode emission, from Eric Dumazet.
2) Fix build of BPF samples sys_perf_event_open() usage to compiled out
unavailable test_attr__{enabled,open} checks. Also fix potential overflows
in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel.
3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian
archs like s390x and also improve the test coverage, from Ilya Leoshkevich.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull NVMe fixes from Keith:
"We have a few late nvme fixes for a couple device removal kernel
crashes, and a compat fix for a new ioctl introduced during this merge
window."
* 'nvme-5.4-rc7' of git://git.infradead.org/nvme:
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
|
|
Don't swap oper and admin schedules too early, it's not correct and
causes crash.
Steps to reproduce:
1)
tc qdisc replace dev eth0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 1@2 \
base-time $SOME_BASE_TIME \
sched-entry S 01 80000 \
sched-entry S 02 15000 \
sched-entry S 04 40000 \
flags 2
2)
tc qdisc replace dev eth0 parent root handle 100 taprio \
base-time $SOME_BASE_TIME \
sched-entry S 01 90000 \
sched-entry S 02 20000 \
sched-entry S 04 40000 \
flags 2
3)
tc qdisc replace dev eth0 parent root handle 100 taprio \
base-time $SOME_BASE_TIME \
sched-entry S 01 150000 \
sched-entry S 02 200000 \
sched-entry S 04 40000 \
flags 2
Do 2 3 2 .. steps more times if not happens and observe:
[ 305.832319] Unable to handle kernel write to read-only memory at
virtual address ffff0000087ce7f0
[ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
[ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT)
[...]
[ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80
[ 306.022422] Call trace:
[ 306.024866] taprio_free_sched_cb+0x4c/0x98
[ 306.029040] rcu_process_callbacks+0x25c/0x410
[ 306.033476] __do_softirq+0x10c/0x208
[ 306.037132] irq_exit+0xb8/0xc8
[ 306.040267] __handle_domain_irq+0x64/0xb8
[ 306.044352] gic_handle_irq+0x7c/0x178
[ 306.048092] el1_irq+0xb0/0x128
[ 306.051227] arch_cpu_idle+0x10/0x18
[ 306.054795] do_idle+0x120/0x138
[ 306.058015] cpu_startup_entry+0x20/0x28
[ 306.061931] rest_init+0xcc/0xd8
[ 306.065154] start_kernel+0x3bc/0x3e4
[ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662)
[ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]---
[ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt
[ 306.085847] SMP: stopping secondary CPUs
[ 306.089765] Kernel Offset: disabled
Try to explain one of the possible crash cases:
The "real" admin list is assigned when admin_sched is set to
new_admin, it happens after "swap", that assigns to oper_sched NULL.
Thus if call qdisc show it can crash.
Farther, next second time, when sched list is updated, the admin_sched
is not NULL and becomes the oper_sched, previous oper_sched was NULL so
just skipped. But then admin_sched is assigned new_admin, but schedules
to free previous assigned admin_sched (that already became oper_sched).
Farther, next third time, when sched list is updated,
while one more swap, oper_sched is not null, but it was happy to be
freed already (while prev. admin update), so while try to free
oper_sched the kernel panic happens at taprio_free_sched_cb().
So, move the "swap emulation" where it should be according to function
comment from code.
Fixes: 9c66d15646760e ("taprio: Add support for hardware offloading")
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-11-05
this is a pull request of 33 patches for net/master.
In the first patch Wen Yang's patch adds a missing of_node_put() to CAN device
infrastructure.
Navid Emamdoost's patch for the gs_usb driver fixes a memory leak in the
gs_can_open() error path.
Johan Hovold provides two patches, one for the mcba_usb, the other for the
usb_8dev driver. Both fix a use-after-free after USB-disconnect.
Joakim Zhang's patch improves the flexcan driver, the ECC mechanism is now
completely disabled instead of masking the interrupts.
The next three patches all target the peak_usb driver. Stephane Grosjean's
patch fixes a potential out-of-sync while decoding packets, Johan Hovold's
patch fixes a slab info leak, Jeroen Hofstee's patch adds missing reporting of
bus off recovery events.
Followed by three patches for the c_can driver. Kurt Van Dijck's patch fixes
detection of potential missing status IRQs, Jeroen Hofstee's patches add a chip
reset on open and add missing reporting of bus off recovery events.
Appana Durga Kedareswara rao's patch for the xilinx driver fixes the flags
field initialization for axi CAN.
The next seven patches target the rx-offload helper, they are by me and Jeroen
Hofstee. The error handling in case of a queue overflow is fixed removing a
memory leak. Further the error handling in case of queue overflow and skb OOM
is cleaned up.
The next two patches are by me and target the flexcan and ti_hecc driver. In
case of a error during can_rx_offload_queue_sorted() the error counters in the
drivers are incremented.
Jeroen Hofstee provides 6 patches for the ti_hecc driver, which properly stop
the device in ifdown, improve the rx-offload support (which hit mainline in
v5.4-rc1), and add missing FIFO overflow and state change reporting.
The following four patches target the j1939 protocol. Colin Ian King's patch
fixes a memory leak in the j1939_sk_errqueue() handling. Three patches by
Oleksij Rempel fix a memory leak on socket release and fix the EOMA packet in
the transport protocol.
Timo Schlüßler's patch fixes a potential race condition in the mcp251x driver
on after suspend.
The last patch is by Yegor Yefremov and updates the SPDX-License-Identifier to
v3.0.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Changing nvme_passthru_cmd64 to add a field: rsvd2. This field is an explicit
marker for the padding space added on certain platforms as a result of the
enlargement of the result field from 32 bit to 64 bits in size, and
fixes differences in struct size when using compat ioctl for 32-bit
binaries on 64-bit architecture.
Fixes: 65e68edce0db ("nvme: allow 64-bit results in passthru commands")
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Charles Machalow <[email protected]>
[changelog]
Signed-off-by: Keith Busch <[email protected]>
|
|
Add Tigerlake HDMI codec support.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205379
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=112171
Cc: Pan Xiuli <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Use devm_gpio_request() to automatic unroll when fails and avoid
resource leaks at error paths.
Signed-off-by: Yong Zhi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes! We found a late regression in the Intel Merrifield
driver. Oh well. We fixed it up.
- Fix a build error in the tools used for kselftest
- A series of reverts to bring the Intel Merrifield back to working.
We will likely unrevert the reverts for v5.5 but we can't have v5.4
broken"
* tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: merrifield: Pass irqchip when adding gpiochip"
Revert "gpio: merrifield: Restore use of irq_base"
Revert "gpio: merrifield: Move hardware initialization to callback"
tools: gpio: Use !building_out_of_srctree to determine srctree
|
|
The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell for
watchdog is added.
Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block")
Signed-off-by: Matti Vaittinen <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
SCU firmware calculates pretimeout based on current time stamp
instead of watchdog timeout stamp, need to convert the pretimeout
to SCU firmware's timeout value.
Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support")
Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.
[0]: http://linux-meson.com
Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
When an IRQ is present in the dts, the probe function shall fail if
the interrupt can not be registered.
The probe function shall also be retried if getting the irq is being
deferred.
Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
The compat_ptr_ioctl() infrastructure did not make it into
linux-5.4, so cpwd now fails to build.
Fix it by using an open-coded version.
Fixes: 68f28b01fb9e ("watchdog: cpwd: use generic compat_ptr_ioctl")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.
Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.
This may result in the following (rare) crash in ctrl disconnect
during scan_work:
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
...
Call Trace:
nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
nvme_remove_namespaces+0x35/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
nvme_sysfs_delete+0x49/0x60 [nvme_core]
dev_attr_store+0x17/0x30
sysfs_kf_write+0x3e/0x50
kernfs_fop_write+0x11e/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xb9/0x1a0
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8d02bfb154
Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.
Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Anton Eidelman <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
In case there are controllers that are not associated with any RDMA
device (e.g. during unsuccessful reconnection) and the user will unload
the module, these controllers will not be freed and will access already
freed memory. The same logic appears in other fabric drivers as well.
Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Max Gurtovoy <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/raw-clone.h#L31
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd316 ("fork: add clone3")
Cc: Kees Cook <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: David Howells <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Florian Weimer <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # 5.3
Cc: GNU C Library <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Aleksa Sarai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
copy_file_range tries to use the OSD 'copy-from' operation, which simply
performs a full object copy. Unfortunately, the implementation of this
system call assumes that stripe_count is always set to 1 and doesn't take
into account that the data may be striped across an object set. If the
file layout has stripe_count different from 1, then the destination file
data will be corrupted.
For example:
Consider a 8 MiB file with 4 MiB object size, stripe_count of 2 and
stripe_size of 2 MiB; the first half of the file will be filled with 'A's
and the second half will be filled with 'B's:
0 4M 8M Obj1 Obj2
+------+------+ +----+ +----+
file: | AAAA | BBBB | | AA | | AA |
+------+------+ |----| |----|
| BB | | BB |
+----+ +----+
If we copy_file_range this file into a new file (which needs to have the
same file layout!), then it will start by copying the object starting at
file offset 0 (Obj1). And then it will copy the object starting at file
offset 4M -- which is Obj1 again.
Unfortunately, the solution for this is to not allow remote object copies
to be performed when the file layout stripe_count is not 1 and simply
fallback to the default (VFS) copy_file_range implementation.
Cc: [email protected]
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
If ceph_atomic_open is handed a !d_in_lookup dentry, then that means
that it already passed d_revalidate so we *know* that it's negative (or
at least was very recently). Just return -ENOENT in that case.
This also addresses a subtle bug in dentry handling. Non-O_CREAT opens
call atomic_open with the parent's i_rwsem shared, but calling
d_splice_alias on a hashed dentry requires the exclusive lock.
If ceph_atomic_open receives a hashed, negative dentry on a non-O_CREAT
open, and another client were to race in and create the file before we
issue our OPEN, ceph_fill_trace could end up calling d_splice_alias on
the dentry with the new inode with insufficient locks.
Cc: [email protected]
Reported-by: Al Viro <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The nsdeps script passes a list of the module source files to
generate_deps_for_ns() as a space delimited string named $mod_source_files,
which then passes it to spatch. But since $mod_source_files is not encased
in quotes, each source file in that string is treated as a separate shell
function argument (as $2, $3, $4, etc.). However, the spatch invocation
only refers to $2, so only the first file out of $mod_source_files is
processed by spatch.
This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't
get inserted) when a module is composed of many source files and the
"main" module file containing the MODULE_LICENSE() statement is not the
first file listed in $mod_source_files. Fix this by encasing
$mod_source_files in quotes so that the entirety of the string is
treated as a single argument and can be referred to as $2.
In addition, put quotes in the variable assignment of mod_source_files
to prevent any shell interpretation and field splitting.
Reviewed-by: Masahiro Yamada <[email protected]>
Acked-by: Matthias Maennich <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.
Check the following report for longer workloads:
$ perf report -s time -F time,overhead --stdio
Fix hist_entry__sort() to properly return int64_t and not possible cut
int.
Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected] # v3.16+
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "GPL-2.0" license identifier changed to "GPL-2.0-only" in SPDX v3.0.
Signed-off-by: Yegor Yefremov <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
condition
In mcp251x_restart_work_handler() the variable to stop the interrupt
handler (priv->force_quit) is reset after the chip is restarted and thus
a interrupt might occur.
This patch fixes the potential race condition by resetting force_quit
before enabling interrupts.
Signed-off-by: Timo Schlüßler <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
trace_find_next_event() was buggy and pretty much a useless helper. As
there are no more users, just remove it.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of calling a useless (and broken) helper function to get the
next event of a tep event array, just get the array directly and iterate
over it.
Note, the broken part was from trace_find_next_event() which after this
will no longer be used, and can be removed.
Committer notes:
This fixes a segfault when generating python scripts from perf.data
files with multiple tracepoint events, i.e. the following use case is
fixed by this patch:
# perf record -e sched:* sleep 1
[ perf record: Woken up 31 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ]
# perf script -g python
Segmentation fault (core dumped)
#
Reported-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The introduction of clocksource_tsc_early broke the functionality of
"tsc=reliable" and "tsc=nowatchdog" command line parameters, since
clocksource_tsc_early is unconditionally registered with
CLOCK_SOURCE_MUST_VERIFY and thus put on the watchdog list.
This can cause the TSC to be declared unstable during boot:
clocksource: timekeeping watchdog on CPU0: Marking clocksource
'tsc-early' as unstable because the skew is too large:
clocksource: 'refined-jiffies' wd_now: fffb7018 wd_last: fffb6e9d
mask: ffffffff
clocksource: 'tsc-early' cs_now: 68a6a7070f6a0 cs_last: 68a69ab6f74d6
mask: ffffffffffffffff
tsc: Marking TSC unstable due to clocksource watchdog
The corresponding elapsed times are cs_nsec=1224152026 and wd_nsec=378942392, so
the watchdog differs from TSC by 0.84 seconds.
This happens when HPET is not available and jiffies are used as the TSC
watchdog instead and the jiffies update is not happening due to lost timer
interrupts in periodic mode, which can happen e.g. with expensive debug
mechanisms enabled or under massive overload conditions in virtualized
environments.
Before the introduction of the early TSC clocksource the command line
parameters "tsc=reliable" and "tsc=nowatchdog" could be used to work around
this issue.
Restore the behaviour by disabling the watchdog if requested on the kernel
command line.
[ tglx: Clarify changelog ]
Fixes: aa83c45762a24 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Michael Zhivich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Cyrill reported the following crash:
BUG: unable to handle page fault for address: 0000000000001ff0
#PF: supervisor read access in kernel mode
RIP: 0010:get_stack_info+0xb3/0x148
It turns out that if the stack tracer is invoked before the exception stack
mappings are initialized in_exception_stack() can erroneously classify an
invalid address as an address inside of an exception stack:
begin = this_cpu_read(cea_exception_stacks); <- 0
end = begin + sizeof(exception stacks);
i.e. any address between 0 and end will be considered as exception stack
address and the subsequent code will then try to derefence the resulting
stack frame at a non mapped address.
end = begin + (unsigned long)ep->size;
==> end = 0x2000
regs = (struct pt_regs *)end - 1;
==> regs = 0x2000 - sizeof(struct pt_regs *) = 0x1ff0
info->next_sp = (unsigned long *)regs->sp;
==> Crashes due to accessing 0x1ff0
Prevent this by checking the validity of the cea_exception_stack base
address and bailing out if it is zero.
Fixes: afcd21dad88b ("x86/dumpstack/64: Use cpu_entry_area instead of orig_ist")
Reported-by: Cyrill Gorcunov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Cyrill Gorcunov <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but
did not update the documentation comment. Fix it up.
Fixes: b977fcf477c1 ("irqdomain/debugfs: Use PAs to generate fwnode names")
Signed-off-by: Yi Wang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed
a problem in setup_local_APIC().
The code checks unconditionally for a mismatch of the logical APIC id by
comparing the early APIC id which was initialized in get_smp_config() with
the actual LDR value in the APIC.
Due to the removal of the bogus LDR initialization the check now can
trigger on bigsmp_32 APIC systems emitting a warning for every booting
CPU. This is of course a false positive because the APIC is not using
logical destination mode.
Restrict the check and the possibly resulting fixup to systems which are
actually using the APIC in logical destination mode.
[ tglx: Massaged changelog and added Cc stable ]
Fixes: bae3a8d3308 ("x86/apic: Do not initialize LDR and DFR for bigsmp")
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
The update of the VDSO data is depending on __arch_use_vsyscall() returning
True. This is a leftover from the attempt to map the features of various
architectures 1:1 into generic code.
The usage of __arch_use_vsyscall() in the actual vsyscall implementations
got dropped and replaced by the requirement for the architecture code to
return U64_MAX if the global clocksource is not usable in the VDSO.
But the __arch_use_vsyscall() check in the update code stayed which causes
the VDSO data to be stale or invalid when an architecture actually
implements that function and returns False when the current clocksource is
not usable in the VDSO.
As a consequence the VDSO implementations of clock_getres(), time(),
clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus
information.
Remove the __arch_use_vsyscall() check from the VDSO update function and
update the VDSO data unconditionally.
[ tglx: Massaged changelog and removed the now useless implementations in
asm-generic/ARM64/MIPS ]
Fixes: 44f57d788e7deecb50 ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.
Cc: Imre Deak <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 49748264826ff4cc7f0ebbdd6b0d1a36b13b1cee)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.
Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.
To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.
Fixes: 6cfe7ec02e85 ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125
Reported-and-tested-by: Val Kulkov <[email protected]>
Reported-and-tested-by: wangqr <[email protected]>
Cc: Val Kulkov <[email protected]>
Cc: wangqr <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a8ddac7c9f06a12227a4f5febd1cbe0575a33179)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
total message size
We were sending malformed EOMA with total message size set to 0. This
issue has been fixed in the previous patch.
In this patch a sanity check is added to the RX path and a error message
is displayed.
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
with the total message size set
We were sending malformed EOMA messageswith total message size set to 0.
This patch fixes the bug.
Reported-by: https://github.com/linux-can/can-utils/issues/159
Signed-off-by: Oleksij Rempel <[email protected]>
Acked-by: Kurt Van Dijck <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Filters array is coped from user space and linked to the j1939 socket.
On socket release this memory was not freed.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Currently the error return paths do not free skb and this results in a
memory leak. Fix this by freeing them before the return.
Addresses-Coverity: ("Resource leak")
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
While the ti_hecc has interrupts to report when the error counters increase
to a certain level and which change state it doesn't handle the case that
the error counters go down again, so the reported state can actually be
wrong. Since there is no interrupt for that, do update state based on the
error counters, when the state is not error active and goes down again.
Signed-off-by: Jeroen Hofstee <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|