aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-04-19tipc: Don't record failed publication attempt as a successAllan Stephens1-2/+3
No longer increments counter of number of publications by a node if an attempt to add a new publication fails. This prevents TIPC from incorrectly blocking future publications because the configured maximum number of publications has been reached. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Update node-scope publications when network address is assignedAllan Stephens2-7/+12
Ensures that node-scope name publications that exist prior to the configuration of a node's network address are properly re-initialized with that address when it is assigned. TIPC's node-scope publications are now tracked using a publications list like the lists used for cluster-scope and zone-scope publications so they can be easily updated when required. The inclusion of node scope name publications in a conventional publication list means that they must now also be withdrawn, just like cluster and zone scope publications are currently withdrawn. So some conditional tests on scope ==/!= TIPC_NODE_SCOPE are inserted/removed accordingly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Separate cluster-scope and zone-scope names into distinct listsAllan Stephens1-5/+26
Utilizes distinct lists to track zone-scope and cluster-scope names published by a node. For now, TIPC continues to process the entries in both lists in the same way; however, an upcoming patch will utilize the existence of the lists to prevent the sending of cluster-scope names to nodes that are not part of the local cluster. To achieve this, an array of publication lists is introduced, so that they can be iterated over and accessed via publ->scope as an index where convenient. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19bonding: start slaves with link down for ARP monitorMichal Kubeček1-12/+21
Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19nf_bridge: remove holes in struct nf_bridge_infoEric Dumazet1-5/+5
Put use & mask on same location to avoid two holes on 64bit arches Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19ipv4: dont drop packet in defrag but consume itEric Dumazet1-1/+1
When defragmentation is finalized, we clone a packet and kfree_skb() it. Call consume_skb() to not confuse dropwatch, since its not a drop. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19net: gro: GRO_MERGED_FREE consumes packetsEric Dumazet1-1/+4
As part of GRO processing, merged skbs should be consumed, not freed, to not confuse dropwatch/drop_monitor. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19net: dont drop packet but consume itEric Dumazet1-1/+1
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19ipv6: dccp: dont drop packet but consume itEric Dumazet1-1/+1
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19packet: dont drop packet but consume itEric Dumazet1-1/+1
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19ipv6: tcp: dont drop packet but consume itEric Dumazet1-1/+1
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19netlink: dont drop packet but consume itEric Dumazet1-1/+1
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19ip6_tunnel: dont drop packet but consume itEric Dumazet1-1/+1
When we need to reallocate skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19net: fix compile error of leaking kmemleak.h headerShan Wei2-0/+2
net/core/sysctl_net_core.c: In function ‘sysctl_core_init’: net/core/sysctl_net_core.c:259: error: implicit declaration of function ‘kmemleak_not_leak’ with same error in net/ipv4/route.c Signed-off-by: Shan Wei <davidshan@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: restore max-read-request-size in Device Conrol RegisterHuang, Xiong2-11/+11
in some platforms, we found the max-read-request-size in Device Control Register is set to 0 by (BIOS?) during bootup, this will cause the performance(throughput) very bad. Restore it to a min-value. register definition of REG_DEVICE_CTRL is removed, using kernel API to access it as it's a standard pcie register. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: using fixed TXQ configuration for l2cb and l1cHuang, Xiong2-19/+28
using fixed TXQ config for l2cb and l1c regardless dmar_block to make tx-DMA more stable. register REG_TXQ_CTRL is refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove dmaw_blockHuang, Xiong2-5/+0
dmaw_block is never used in the driver, remove it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: correct wrong definition of REG_DMA_CTRLHuang, Xiong2-43/+32
some fields of REG_DMA_CTRL(15C0) are wrong, replace with the newest one. haredware uses fixed dma-write-block size, remove dmaw_block related code in function atl1c_configure_dma. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: wrong register used to stop TXQHuang, Xiong1-1/+1
function atl1c_stop_mac uses wrong register of REG_TWSI_CTRL to stop mac, replace it with REG_TXQ_CTRL. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove code related to rxq 1/2/3Huang, Xiong2-19/+13
remove code related to rxq 1/2/3 since multi-q not support. refine REG_RXQ_CTRL definition as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: split 2 32bit registers of TPD to 4 16bit registersHuang, Xiong3-39/+22
TPD producer/consumer index is 16bit wide. 16bit read/write reduce the dependency of the 2 tpd rings (hi and lo) rename reg(157C/1580) to keep name coninsistency. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove SMB/CMB DMA related codeHuang, Xiong3-57/+6
l1c & later chips don't support DMA for SMB. CMB is removed from hardware. reg(15C8) is used to trig interrupt by tpd threshold. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove VPD registerHuang, Xiong3-16/+4
VPD register is only used for L1(devid=PCI_DEVICE_ID_ATTANSIC_L1) to access external NV-memory. l1c & later chip doesn't use it any more. PHY 0/1 registers occupy the last 2 slots of the dump table. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove HDS registerHuang, Xiong2-9/+0
remove HDS register as it doesn't exist in hardware. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: remove multiple-RX-Q codeHuang, Xiong3-210/+66
the multiple-RX-Q in hardware doesn't work, all related register definition & code are removed. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18atl1c: update author contact info & company/driver desciptionHuang, Xiong1-2/+3
replace unavailable email of the author since he left with a mail-list. update company info as well, Atheros was acquired by Qualcomm. insert "100" to driver description since it support 100M controller. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18Merge branch 'master' of ↵John W. Linville290-7242/+14493
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c include/net/nfc/nfc.h net/nfc/netlink.c net/wireless/nl80211.c
2012-04-18Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller12-74/+96
Included changes: * remove duplicated line in comment * add htons() invocation for tt_crc as suggested by Al Viro * OriGinator Message seqno initial value is now random * some cleanups and fixes
2012-04-18tipc: Factor out name publication code to a separate functionAllan Stephens1-27/+34
This is done so that it can be reused with differing publication lists, instead of being hard coded to the cluster publicaton list. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-18tipc: introduce publication lists structAllan Stephens1-10/+17
There is currently a single list that is containing both cluster-scope and zone-scope publications, and the list count is a separate free floating variable. Create a struct to bind the count to the list, and to pave the way for factoring out the publications into zone/cluster/node scope. The current "publ_root" most matches what will be the cluster scope list, so it is named accordingly in this commit. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-18batman-adv: skip the window protection test when the originator has no ↵Antonio Quartulli1-1/+2
neighbours When we receive an OGM from from a node for the first time, the last_real_seqno field of the orig_node structure has not been initialised yet. The value of this field is used to compute the current ogm-seqno window and therefore the protection mechanism will probably drop the packet due to an out-of-window error. To avoid this situation this patch adds a check to skip the window protection mechanism if no neighbour nodes have already been added. When the first neighbour node is added, the last_real_seqno field is initialised too. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: print OGM seq numbers as unsigned intAntonio Quartulli1-4/+4
OGM sequence numbers are declared as uint32_t and so they have to printed using %u instead of %d in order to avoid wrong representations. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: use ETH_HLEN instead of sizeof(struct ethhdr)Antonio Quartulli9-25/+21
Instead of using sizeof(struct ethhdr) it is strongly recommended to use the kernel macro ETH_HLEN. This patch substitute each occurrence of the former expressione with the latter one. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: mark existing ogm variables as batman ivMarek Lindner3-5/+5
The coming protocol changes also will have a part called "OGM". That makes it necessary to introduce a distinction in the code base. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: rename BATMAN_OGM_LEN to BATMAN_OGM_HLENMarek Lindner4-14/+14
Using BATMAN_OGM_LEN leaves one with the impression that this is the full packet size which is not the case. Therefore the variable is renamed. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: refactoring API: find generalized name for bat_ogm_init_primary ↵Marek Lindner4-6/+6
callback Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: handle routing code initialization properlyMarek Lindner3-11/+17
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: add iface_disable() callback to routing APIMarek Lindner4-2/+11
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: randomize initial seqno to avoid collisionMarek Lindner1-0/+5
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: refactoring API: find generalized name for bat_ogm_init callbackMarek Lindner4-6/+6
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: move ogm initialization into the proper functionMarek Lindner1-1/+7
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: remove duplicated line in commentAntonio Quartulli1-1/+0
Remove an accidentally added duplicated line in a function comment Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18batman-adv: convert the tt_crc to network orderAntonio Quartulli1-1/+1
Before sending out a TT_Request packet we must convert the tt_crc field value to network order (since it is 16bits long). Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18net/core:Remove memleak reports by kmemleak_not_leak.majianpeng1-1/+1
Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18net/ipv4:Remove two memleak reports by kmemleak_not_leak.majianpeng1-1/+1
Signed-off-by: majianpeng <majianpeng@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17net: filter: remove unused cpu_off in sparc JITEric Dumazet1-2/+0
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17dmfe: enforce consistent timing delay.françois romieu1-1/+5
The driver does not always use the same timing for what looks like the same operations. - DCR0 Use the same udelay everywhere for reset. Upper bound is 100 us. - DCR9 Use 5us delay for srom clock. 1us delay for phy_write_1bit (writes PHY_DATA_[01]) are not changed as they stay withing a 2,5MHz MDIO clock range. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17net: filter: Fix some more small issues in sparc JIT.David S. Miller3-44/+84
Fix mixed space and tabs. Put bpf_jit_load_*[] externs into bpf_jit.h "while(0)" --> "while (0)" "COND (X)" --> "COND(X)" Document branch offset calculations, and bpf_error's return sequence. Document the reason we need to emit three nops between the %y register write and the divide instruction. Remove erroneous trailing semicolons from emit_read_y() and emit_write_y(). Based upon feedback from Sam Ravnborg. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17net: filter: Fix some minor issues in sparc JIT.David S. Miller3-5/+6
Correct conventions comments. %o4 and %o5 were swapped, %g3 was not documented. Use r_TMP instead of r_SKB_DATA + r_OFF where possible in assembler stubs. Correct discussion of %o4 and %o5 in one of bpf_jit_compile()'s comments. Based upon feedback from Richard Mortimer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17mwifiex: corrections in timestamp related codeAmitkumar Karwar6-18/+30
We get two timing related fields for each bss from firmware in scan results. 1) timestamp - Actual timestamp information in probe response/beacon 2) network_tsf - firmware's TSF value at the time the beacon or probe response was received. Both are needed while associating by firmware. The patch takes care of following things. 1) We should pass "timestamp" to cfg80211_inform_bss(), but currently "network_tsf" is being provided. This error is corrected here. 2) Rename "network_tsf" to "fw_tsf" 3) Make use of u64 variable instead of an array of u8/u32 to save parsed "timestamp" information. 4) Use timestamp provided to stack in scan results using cfg80211_inform_bss() while associating. (bss->tsf) 5) Allocate space to save fw_tsf in "priv" of cfg80211_bss and retrieve it while associating. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Powered by cgit, Gruvboxed by Blaster4385.