aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-04-17mwifiex: code cleanup in BSS handlingAmitkumar Karwar3-64/+31
Rearrange some code to save extra parameters to the functions. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas USB: convert to asynchronous firmware loadingDaniel Drake1-59/+43
Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas SDIO: convert to asynchronous firmware loadingDaniel Drake1-85/+121
Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas: add asynchronous firmware loading capabilityDaniel Drake4-0/+164
As described at http://article.gmane.org/gmane.linux.kernel.wireless.general/86084 libertas is taking a long time to load because it loads firmware during module loading. Add a new API for interface drivers to load their firmware asynchronously. The same semantics of the firmware table are followed like before. Interface drivers will be converted in follow-up patches, then we can remove the old, synchronous firmware loading function. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas: harden-up exit pathsDaniel Drake1-1/+8
These simple sanity check avoids extra complexity in error paths when moving to asynchronous firmware loading (which means the device may fail to init some time after its creation). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas: Firmware loading simplificationsDaniel Drake8-293/+94
Remove the ability to pass module parameters with firmware filenames for USB and SDIO interfaces. Remove the ability to pass custom "user" filenames to lbs_get_firmware(). Remove the ability to reprogram internal device memory with a different firmware from the USB driver (we don't know of any users), and simplify the OLPC firmware loading quirk to simply placing the OLPC firmware at the top of the list (we don't know of any users other than OLPC). Move lbs_get_firmware() into its own file. These simplifications should have no real-life effect but make the upcoming transition to asynchronous firmware loading considerably less painful. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe failsAndreas Hartmann1-3/+4
There are connection stalls or very poor throughputs with rt2800 hardware using 802.11n in AP mode since patch "mac80211: retry sending failed BAR frames later instead of tearing down aggr"[1][2]. Since rt2800 hardware is not able to correctly report the tx status of BAR frames, this patch removes as workaround the existing error handling on AP side, which lets mac80211 send a BAR when an AMPDU subframe fails. As a result, most wifi clients (aside from Intel STAs on Windows) instead will timeout now the reorder buffer and request the lost frame again. The correct solution would be, to tear down BA session on AP side. This patch was born on the basis of "[RFT] rt2x00: Tear down BA session on QoS frame failure"[3]. Thanks to Helmut Schaa for his support! [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/83297/focus=83304 [2] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-testing.git;a=commit;h=f0425beda4d404a6e751439b562100b902ba9c98 [3] http://thread.gmane.org/gmane.linux.drivers.rt2x00.user/569 Signed-off-by: Andreas Hartmann <andihartmann@01019freenet.de> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: use ath9k_hw_fbin2freq instead of FBIN2FREQGabor Juhos3-10/+11
The FBIN2FREQ macro and the ath9k_hw_fbin2freq function does the same thing. Remove the macro, and use the inline function instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: move ath9k_hw_fbin2freq function to eeprom.hGabor Juhos3-17/+8
Both eeprom.c and ar9003_eeprom.c has an indentical 'ath9k_hw_fbin2freq' function. Move the function to a common place and remove the duplicates. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: remove unused PWRINC_*_TO_*_CHAIN definesGabor Juhos1-3/+0
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: merge power correction constantsGabor Juhos2-9/+6
The existing constants are used for reduction/increase tx power level on devices with 2x2 and 3x3 chainmask. Both reduction and increase must use the same value, so it makes no sense to use separate constants for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17drivers/net/wireless/libertas/if_usb.c: add missing debugging codeJulia Lawall1-2/+4
Add a corresponding leave call on error failure. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17r8169: support the new RTL8411 chip.Hayes Wang1-2/+138
Compared with previous chipsets, it needs no special action trough the jumbo{enable/disable} helpers to operate with jumbo frames. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-17r8169: adjust some functions of 8111fHayes Wang1-52/+47
Put some settings of 8111f into one function which may be reused. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2012-04-17r8169: support the new RTL8402 chip.Hayes Wang1-1/+121
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2012-04-17r8169: add device specific CSI access helpers.Hayes Wang1-106/+194
New chipsets need it. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2012-04-17r8169: modify pll power functionHayes Wang1-7/+30
Adjust r810x_pll_power_down, r810x_pll_power_up, and r8168_pll_power_up. Always power up device during rtl_open. For r810x, turn off more power when the WOL is disabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2012-04-17r8169: 8168c and later require bit 0x20 to be set in Config2 for PME signaling.Francois Romieu1-0/+6
The new 84xx stopped flying below the radars. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-04-17r8169: Config1 is read-only on 8168c and later.Francois Romieu1-2/+13
Suggested by Hayes. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-04-16hippi: fix printk format in rrunner.cRandy Dunlap1-2/+3
Fix printk format warning (from i386 build): drivers/net/hippi/rrunner.c:146:9: warning: format '%08llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: linux-hippi@sunsite.dk Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16Merge branch 'master' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller6-60/+6
2012-04-16net: filter: Just In Time compiler for sparcDavid S. Miller6-0/+1042
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16iwlwifi: remove get_cmd_stringJohannes Berg12-115/+144
The command strings are needed through the layers for debug and error messages, but can differ with opmode. As a result, we need to give the command names to the transport layer as configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: optimize struct iwl_cmd_meta layoutJohannes Berg1-2/+2
Having a u32 before a potential 64-bit value is not very efficient, move it last. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: expose static methods for MVM useDavid Spinadel5-78/+156
To support hybrid state of MVM op_mode, most of the functioanallity will be done using DVM functions. When MVM will have independant live, the declarations will be removed and the functions will be static back. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: phy db channel to tx power channel groupDavid Spinadel2-2/+24
Implement mapping of channel to TX power channel group, for sending channel specific data before add context. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: Disabling calibrations variableDor Shaish4-11/+50
Add a variable for disabling specific calibrations. Merged old variables for calibrations disabling. Signed-off-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove uneeded include from iwl-pci.cEmmanuel Grumbach1-2/+0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove double verification of ucode sectionsDavid Spinadel1-36/+0
Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: set size of ucode sectionDavid Spinadel1-0/+1
Set size of firmware section in mvm bundle format. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove iwl_tx_queue declarationJohannes Berg1-2/+0
The declaration isn't needed as the struct is only used in code that includes the right header file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: move status definitions from iwl-sharedDon Fry6-29/+31
The code has been changed, move the definitions to the proper file being used by the code. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: added HBUS_TARG_TEST_REGAmit Beka1-0/+3
This register is used to enable some debug mechanisms. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: move HCMD_ACTIVE to transDon Fry6-17/+18
The HCMD_ACTIVE bit is only used in trans. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: complete STATUS_READY refactoringDon Fry3-6/+17
When WiMax takes over the RF, inform the op_mode. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove antenna from mod params structJohannes Berg1-2/+0
It doesn't even exist as a module parameter, so just remove the item from the struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove uCode alternatives mechanismJohannes Berg5-53/+4
We've never released firmware using the alternatives mechanism and our build process makes that difficult anyway. This means that in every file we have ever built (except maybe by hand for testing) the listed alternative was 0. Make the alternative field in the TLVs part of the TLV number (thus expanding that to 32 bits); this gives us more TLV numbers (not really needed) and more importantly protects against rogue firmware files that actually do use the alternatives mechanism -- those will now be rejected since they don't contain any valid TLVs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16iwlwifi: remove no_sleep_autoadjustJohannes Berg4-73/+2
My original idea with this was to adjust the sleep pattern of the uCode based on the maximum network latency userspace asked for. Due to nobody wanting to test it, this logic was disabled by default. It seems the time has come to remove it, since it's not only always disabled but there also don't seem to be any applications that actually request a max network latency. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-16net/can: use module_pci_driverAxel Lin5-59/+5
This patch converts the drivers in drivers/net/can/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-can@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-04-16can: fix sparse warning for cgw_listDaniel Baluta1-1/+1
Make cgw_list static to remove the following sparse warning: net/can/gw.c:69:1: warning: symbol 'cgw_list' was not declared. Should it be static? Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-04-16wireless: rt2x00: rt2800pci add more RT539x idsXose Vazquez Perez1-0/+2
RT539x devices: (0x1814, 0x5362) (0x1814, 0x5392) Taken from ralink driver 2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16wireless: rt2x00: rt{2500,73}usb.c put back duplicate idXose Vazquez Perez2-1/+2
put back 0x050d,0x7050 to rt73usb, same usb_id for two chips: K7SF5D7050A ver 2xxx is rt2500 K7SF5D7050B ver 3xxx is rt73 <http://en-us-support.belkin.com/app/answers/detail/a_id/297/kw/K7SF5D7050> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: simplify ath9k_hw_get_scaled_power functionGabor Juhos1-13/+8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: introduce ath9k_hw_get_scaled_power helperGabor Juhos5-75/+44
The computation of the scaled power value in various eeprom files uses identical code. Move that code into a helper function and use that instead of code duplication. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: use consistent value for REDUCE_SCALED_POWER_BY_THREE_CHAINGabor Juhos3-4/+4
The REDUCE_SCALED_POWER_BY_THREE_CHAIN symbol is defined in different eeprom files, and the value varies between the different files. In eeprom_def.c and in ar9003_eeprom.c the value of the symbol is 9, however the comments in these files indicates the value should be 10*log10(3)*2 which is 9.54242509439325. Replace the the value to 10 in these files. Also add comments to eeprom_9287.c. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: use ath9k_hw_update_regulatory_maxpower in ath9k_hw_def_set_txpowerGabor Juhos1-14/+1
We have a helper function for updating the max_power_level value. Use that and remove the duplicated code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16net/wireless: use module_pci_driverAxel Lin13-191/+13
This patch converts the drivers in drivers/net/wireless/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Simon Kelley <simon@thekelleys.org.uk> Cc: Jouni Malinen <j@w1.fi> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: add function retrieve average rssiWey-Yi Guy2-0/+11
Add utility function to provide the average rssi per vif Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16rtlwifi: rtl8192ce: Remove false positives for kmemleakLarry Finger2-0/+5
When rtl8192ce is in operation, kmemleak indicates a number of leaks, yet when the driver is removed all are gone. These false positives happen in two locations: unreferenced object 0xffff880041124000 (size 9536): comm "work_for_cpu", pid 9295, jiffies 4295037203 (age 20596.320s) hex dump (first 32 bytes): 33 00 00 01 01 6d 00 00 00 00 b1 0e 21 0b 00 00 3....m......!... 01 01 6d 00 00 00 00 8b 20 c0 e9 00 00 01 01 6d ..m..... ......m backtrace: [<ffffffff8137a1b1>] kmemleak_alloc+0x21/0x50 [<ffffffff8138d01f>] kmalloc_large_node+0x9a/0xa6 [<ffffffff811335a5>] __kmalloc_node_track_caller+0x175/0x3b0 [<ffffffff812ddfe3>] __alloc_skb+0x73/0x230 [<ffffffff812de1b8>] dev_alloc_skb+0x18/0x30 [<ffffffffa091a3b7>] rtl_pci_probe+0x10e0/0x17d2 [rtlwifi] -- snip -- unreferenced object 0xffff8800b4d3f600 (size 256): comm "kworker/u:2", pid 13221, jiffies 4297830173 (age 9424.568s) hex dump (first 32 bytes): 1c d6 45 b1 00 88 ff ff 1c d6 45 b1 00 88 ff ff ..E.......E..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8137a1b1>] kmemleak_alloc+0x21/0x50 [<ffffffff81130f43>] kmem_cache_alloc_node+0x153/0x270 [<ffffffff812ddfb6>] __alloc_skb+0x46/0x230 [<ffffffff812de1b8>] dev_alloc_skb+0x18/0x30 [<ffffffffa093264a>] rtl92c_set_fw_rsvdpagepkt+0x22a/0x5c0 [rtl8192c_common] -- snip -- Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath5k: add PCI idYoshinori Sato1-0/+1
This device works fine of ath5k. Details bellow 05:00.0 0200: 168c:ff1b (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. Device ff1b (rev 01) Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at febf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k ath5k 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ath5k 0000:05:00.0: setting latency timer to 64 ath5k 0000:05:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x67 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x67 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Powered by cgit, Gruvboxed by Blaster4385.