| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change restores and formalises the behaviour that access to NULL
or other user addresses by the kernel during boot should fault rather
than succeed and modify memory. This was inadvertently broken when
fixing another bug, because it was previously not well defined and
only worked by chance.
powerpc/64s/radix uses high address bits to select an address space
"quadrant", which determines which PID and LPID are used to translate
the rest of the address (effective PID, effective LPID). The kernel
mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So
the kernel page tables are installed in the PID 0 process table entry.
An address at 0x0... selects quadrant 0, which uses PID=PIDR for
translating the rest of the address (that is, it uses the value of the
PIDR register as the effective PID). If PIDR=0, then the translation
is performed with the PID 0 process table entry page tables. This is
the kernel mapping, so we effectively get another copy of the kernel
address space at 0. A NULL pointer access will access physical memory
address 0.
To prevent duplicating the kernel address space in quadrant 0, this
patch allocates a guard PID containing no translations, and
initializes PIDR with this during boot, before the MMU is switched on.
Any kernel access to quadrant 0 will use this guard PID for
translation and find no valid mappings, and therefore fault.
After boot, this PID will be switchd away to user context PIDs, but
those contain user mappings (and usually NULL pointer protection)
rather than kernel mapping, which is much safer (and by design). It
may be in future this is tightened further, which the guard PID could
be used for.
Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before
setting partition table"), introduced this problem because it zeroes
PIDR at boot. However previously the value was inherited from firmware
or kexec, which is not robust and can be zero (e.g., mambo).
Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc: [email protected] # v4.15+
Reported-by: Florian Weimer <[email protected]>
Tested-by: Mauricio Faria de Oliveira <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Currently the comparison of used < 0 is always false because
uses is a size_t. Fix this by making used a ssize_t type.
Detected by Coccinelle:
drivers/misc/ocxl/file.c:320:6-10: WARNING: Unsigned expression
compared with zero: used < 0
Fixes: 5ef3166e8a32 ("ocxl: Driver code for 'generic' opencapi devices")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Andrew Donnellan <[email protected]>
Acked-by: Frederic Barrat <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
The soft IRQ masking code has to hard-disable interrupts in cases
where the exception is not cleared by the masked handler. External
interrupts used this approach for soft masking. Now recently PMU
interrupts do the same thing.
The soft IRQ masking code additionally allowed for interrupt handlers
to hard-enable interrupts after soft-disabling them. The idea is to
allow PMU interrupts through to profile interrupt handlers.
So when interrupts are being replayed when there is a pending
interrupt that requires hard-disabling, there is a test to prevent
those handlers from hard-enabling them if there is a pending external
interrupt. may_hard_irq_enable() handles this.
After f442d00480 ("powerpc/64s: Add support to mask perf interrupts
and replay them"), may_hard_irq_enable() could prematurely enable
MSR[EE] when a PMU exception exists, which would result in the
interrupt firing again while masked, and MSR[EE] being disabled again.
I haven't seen that this could cause a serious problem, but it's
more consistent to handle these soft-masked interrupts in the same
way. So introduce a define for all types of interrupts that require
MSR[EE] masking in their soft-disable handlers, and use that in
may_hard_irq_enable().
Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Commit f14e953b191f ("powerpc/64s: Add support to take additional
parameter in MASKABLE_* macro") messed up MASKABLE_RELON_EXCEPTION_HV_OOL
macro by adding the wrong SOFTEN test which caused guest kernel crash
at boot. Patch to fix the macro to use SOFTEN_TEST_HV instead of
SOFTEN_NOTEST_HV.
Fixes: f14e953b191f ("powerpc/64s: Add support to take additional parameter in MASKABLE_* macro")
Reported-by: Alexey Kardashevskiy <[email protected]>
Fix-Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Tested-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
When DLPAR removing a CPU, the unmapping of the cpu from a node in
unmap_cpu_from_node() should also invalidate the CPUs entry in the
numa_cpu_lookup_table. There is not a guarantee that on a subsequent
DLPAR add of the CPU the associativity will be the same and thus
could be in a different node. Invalidating the entry in the
numa_cpu_lookup_table causes the associativity to be read from the
device tree at the time of the add.
The current behavior of not invalidating the CPUs entry in the
numa_cpu_lookup_table can result in scenarios where the the topology
layout of CPUs in the partition does not match the device tree
or the topology reported by the HMC.
This bug looks like it was introduced in 2004 in the commit titled
"ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the
linux-fullhist tree. Hence tag it for all stable releases.
Cc: [email protected]
Signed-off-by: Nathan Fontenot <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Minor code cleanups and MAINTAINERS update"
* tag 'modules-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modpost: Remove trailing semicolon
ftrace/module: Move ftrace_release_mod() to ddebug_cleanup label
MAINTAINERS: Remove from module & paravirt maintenance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull inode->i_version cleanup from Jeff Layton:
"Goffredo went ahead and sent a patch to rename this function, and
reverse its sense, as we discussed last week.
The patch is very straightforward and I figure it's probably best to
go ahead and merge this to get the API as settled as possible"
* tag 'iversion-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
iversion: Rename make inode_cmp_iversion{+raw} to inode_eq_iversion{+raw}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF and ext2 fixlets from Jan Kara:
"A UDF fix and an ext2 cleanup"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: drop unneeded newline
udf: Sanitize nanoseconds for time stamps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Fix suspend to idle.
Testing on mainline after the initial regulator pull request went in
identified a regression for suspend to idle due to it calling the
suspend operations with states that it wasn't realized could happen,
this patch fixes the problem"
* tag 'regulator-fix-v4.16-suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix suspend to idle
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here:
- fix display-timings lookup in the Device Tree in atmel_lcdfb driver
(Johan Hovold)
- fix video mode and line_length to be set correctly in vfb driver
(Pieter "PoroCYon" Sluys)
- fix returning nonsensical values to the user-space on GIO_FONTX
ioctl when using dummy console (Nicolas Pitre)
- add missing license tag to mmpfb driver (Arnd Bergmann)
- convert radeonfb and pxa3xx_gcu drivers to use ktime_get[_ts64]()
instead of the deprecated do_gettimeofday() (Arnd Bergmann)
- switch udlfb driver from using the pr_*() logging functions to the
dev_*() ones + related cleanups (Ladislav Michl)
- use __raw I/O accessors also on arm64 (Ji Zhang)
- fix Kconfig help text for intelfb driver (Randy Dunlap)
- do not duplicate features data in omapfb driver (Ladislav Michl)
- misc cleanups (Colin Ian King, Markus Elfring, Rasmus Villemoes,
Vasyl Gomonovych, Himanshu Jha, Michael Trimarchi)"
* tag 'fbdev-v4.16' of git://github.com/bzolnier/linux: (25 commits)
video: udlfb: Switch from the pr_*() to the dev_*() logging functions
video: udlfb: Constify read only data
video: fbdev/mmp: add MODULE_LICENSE
console/dummy: leave .con_font_get set to NULL
fbdev: mxsfb: use framebuffer_alloc in the correct way
video: udlfb: Do not name private data 'dev'
video: udlfb: Remove noisy warnings
video: udlfb: Remove redundant gdev variable
video: udlfb: Remove unnecessary local variable
fbdev: auo_k190x: Use zeroing memory allocator instead of allocator/memset
vfb: fix video mode and line_length being set when loaded
fbdev: arm64 use __raw I/O memory api
omapfb: dss: Do not duplicate features data
video: fbdev: omap2: Use PTR_ERR_OR_ZERO()
fbdev: au1200fb: delete duplicate header contents
fbdev: pxa3xx: use ktime_get_ts64 for time stamps
fbdev: radeon: use ktime_get() for HZ calibration
video: smscufx: Improve a size determination in two functions
video: udlfb: Delete an unnecessary return statement in two functions
video: udlfb: Improve a size determination in dlfb_alloc_urb_list()
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull more x86 platform-drivers updates from Andy Shevchenko:
"The DEFINE_SHOW_ATTRIBUTE() macro was defined privately in three
locations and is useful for new and old users to avoid a lot of code
duplication.
Move the macro to seq_file.h.
Along with above, clean up three drivers to use that macro.
This, due to dependencies, was sent separately since affected changes
weren't upstream originally yet. The rationale of doing this now is to
allow use of new macro in v4.17 cycle in a conflictless manner"
* tag 'platform-drivers-x86-v4.16-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: samsung-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro
platform/x86: ideapad-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro
platform/x86: dell-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro
seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound
Pull more ASoC updates from Mark Brown:
"With the merge window having been delayed for another week here's
another batch of updates that came in during that week.
There's a few important fixes in here, mainly a fix for I/O on a
number of devices caused by some of the component rework and a fix for
a potential issue if more than one component in a link provides
compressed operations. The I/O fixes are particularly important as the
problem causes a power regression on a number of OMAP platforms"
* tag 'asoc-v4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: (22 commits)
ASoC: stm32: add of dependency for stm32 drivers
ASoC: mt8173-rt5650: fix child-node lookup
ASoC: dapm: fix debugfs read using path->connected
ASoC: compress: Fixup error messages
ASoC: compress: Remove some extraneous blank lines
ASoC: compress: Correct handling of copy callback
ASoC: Intel: kbl: Enable mclk and ssp sclk early
ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driver
ASoC: Intel: Skylake: Add ssp clock driver
ASoC: Fix twl4030 and 6040 regression by adding back read and write
ASoC: sun8i-codec: Add ADC support for a33
ASoC: rockchip: Use dummy_dai for rt5514 dsp dailink
ASoC: soc-pcm: rename .pmdown_time to .use_pmdown_time for Component
ASoC: ak4613: call dummy write for PW_MGMT1/3 when Playback
ASoC: soc-pcm: don't call flush_delayed_work() many times in soc_pcm_private_free()
ASoC: soc-core: snd_soc_rtdcom_lookup() cares component driver name
ASoC: sam9x5_wm8731: Drop 'ASoC' prefix from error messages
ASoC: sam9g20_wm8731: use dev_*() logging functions
ASoC: max98373 Changed SPDX header in C++ comments style
ASoC: dmic: Fix check of return value from read of 'num-channels'
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860
platform
- add support for the following devices: jz4780 SoC, AST25xx series SoC
and r8a77970 SoC
- convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco
- several fixes for watchdog core
- remove at32ap700x and obsolete documentation
- gpio: Convert to use GPIO descriptors
- rename gemini into FTWDT010 as this IP block is generc from Faraday
Technology
- various clean-ups and small bugfixes
- add Guenter Roeck as co-maintainer
- change maintainers e-mail address
* tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of at32ap700x_wdt
watchdog: remove at32ap700x_wdt
watchdog: sp5100_tco: Add support for recent FCH versions
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: core: make sure the watchdog_worker is not deferred
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: imx2_wdt: restore previous timeout after suspend+resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains the fixes we'd like to target for the 4.16 merge window.
It's not as much as I was originally hoping to do but between glibc,
the chip, and FOSDEM there just wasn't enough time to get everything
put together. As such, this merge window is essentially just going to
be small changes. This includes mostly cleanups:
- A build fix failure to the audit test cases.
RISC-V doesn't have renameat because the generic syscall ABI moved
to renameat2 by the time of our port. The syscall audit test cases
don't understand this, so I added a trivial fix. This went through
mailing list review during the 4.15 merge window, but nobody has
picked it up so I think it's best to just do this here.
- The removal of our command-line argument processing code. The
"mem_end" stuff was broken and the rest duplicated generic device
tree code. The generic code was already being called.
- Some unused/redundant code has been removed, including
__ARCH_HAVE_MMU, current_pgdir, and the initialization of
init_mm.pgd.
- SUM is disabled upon taking a trap, which means that user memory is
protected during traps taking inside copy_{to,from}_user().
- The sptbr CSR has been renamed to satp in C code. We haven't
changed the assembly code in order to maintain compatibility with
binutils 2.29, which doesn't understand the new name.
Additionally, we're adding some new features:
- Basic ftrace support, thanks to Alan Kao!
- Support for ZONE_DMA32.
This is necessary for all the normal reasons, but also to deal with
a deficiency in the Xilinx PCIe controller we're using on our
FPGA-based systems. While the ZONE_DMA32 addition should be
sufficient for most uses, it doesn't complete the fix for the
Xilinx controller.
- TLB shootdowns now only target the harts where they're necessary,
instead of applying to all harts in the system.
These patches have all been sitting on our linux-next branch for a
while now. Due to time constraints this is all I feel comfortable
submitting during the 4.16 merge window, hopefully we'll do better
next time!"
[ Note to self: "harts" is RISC-V speak for "hardware threads". I had
to look that up. - Linus ]
* tag 'riscv-for-linus-4.16-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv: inline set_pgdir into its only caller
riscv: rename sptbr to satp
riscv: don't read back satp in paging_init
riscv: remove the unused current_pgdir function
riscv: add ZONE_DMA32
RISC-V: Limit the scope of TLB shootdowns
riscv: disable SUM in the exception handler
riscv: remove redundant unlikely()
riscv: remove unused __ARCH_HAVE_MMU define
riscv/ftrace: Add basic support
RISC-V: Remove mem_end command line processing
RISC-V: Remove duplicate command-line parsing logic
audit: Avoid build failures on systems without renameat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A couple of MIPS fixes for 4.16-rc1, including an important regression
in 4.15 and a rather more longstanding corner case build fix.
These are separate from the main pull request as one of the bugs fixed
was only recently introduced in v4.15-rc8.
- Fix CPS regression on older binutils due to MIPS_ISA_LEVEL_RAW fix
(4.15)
- Fix allmodconfig + CONFIG_MACH_TX49XX=y builds due to incorrect use
of IS_ENABLED() (2.6.28)"
* tag 'mips_fixes_4.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
MIPS: CPS: Fix MIPS_ISA_LEVEL_RAW fallout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.16.
Rough overview:
(1) Basic support for the Ingenic JZ4770 based GCW Zero open-source
handheld video game console
(2) Support for the Ranchu board (used by Android emulator)
(3) Various cleanups and misc improvements
More detailed summary:
Fixes:
- Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
- Fix vmlinuz default build when ZBOOT selected
- Fix clean up of vmlinuz targets
- Fix command line duplication (in preparation for Ingenic JZ4770)
Miscellaneous:
- Allow Processor ID reads to be to be optimised away by the compiler
(improves performance when running in guest)
- Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
disable on generic platform with Ranchu board support
- Add helpers for assembler macro instructions for older assemblers
- Use assembler macro instructions to support VZ, XPA & MSA
operations on older assemblers, removing C wrapper duplication
- Various improvements to VZ & XPA assembly wrappers
- Add drivers/platform/mips/ to MIPS MAINTAINERS entry
Minor cleanups:
- Misc FPU emulation cleanups (removal of unnecessary include, moving
macros to common header, checkpatch and sparse fixes)
- Remove duplicate assignment of core in play_dead()
- Remove duplication in watchpoint handling
- Remove mips_dma_mapping_error() stub
- Use NULL instead of 0 in prepare_ftrace_return()
- Use proper kernel-doc Return keyword for
__compute_return_epc_for_insn()
- Remove duplicate semicolon in csum_fold()
Platform support:
Broadcom:
- Enable ZBOOT on BCM47xx
Generic platform:
- Add Ranchu board support, used by Android emulator
- Fix machine compatible string matching for Ranchu
- Support GIC in EIC mode
Ingenic platforms:
- Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
- Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
- Add Ingenic JZ4770 CGU clocks
- General Ingenic clk changes to prepare for JZ4770 SoC support
- Use common command line handling code
- Add DT vendor prefix to GCW (Game Consoles Worldwide)
Loongson:
- Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
- Drop 32-bit support for Loongson 2E/2F devices
- Fix build failures due to multiple use of 'MEM_RESERVED'"
* tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits)
MIPS: Malta: Sanitize mouse and keyboard configuration.
MIPS: Update defconfigs after previous patch.
MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level
MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level
MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead
MIPS: Generic: Support GIC in EIC mode
MIPS: generic: Fix Makefile alignment
MIPS: generic: Fix ranchu_of_match[] termination
MIPS: generic: Fix machine compatible matching
MIPS: Loongson fix name confict - MEM_RESERVED
MIPS: bcm47xx: enable ZBOOT support
MIPS: Fix trailing semicolon
MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers
MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers.
MIPS: MSA: Update helpers to use new asm macros
MIPS: XPA: Standardise readx/writex accessors
MIPS: XPA: Allow use of $0 (zero) to MTHC0
MIPS: XPA: Use XPA instructions in assembly
MIPS: VZ: Pass GC0 register names in $n format
MIPS: VZ: Update helpers to use new asm macros
...
|
|
Pull more documentation updates from Jonathan Corbet:
"A few late-arriving fixes, along with Konstantin's PGP document that
had no reason to wait another cycle"
* tag 'docs-4.16-2' of git://git.lwn.net/linux:
Documentation/process: tweak pgp maintainer guide
Documentation/admin-guide: fixes for thunderbolt.rst
Documentation: mips: Update AU1xxx_IDE Kconfig dependencies
Fix broken link in Documentation/process/kernel-docs.rst
Documentation/process: kernel maintainer PGP guide
|
|
'asoc/topic/sgtl5000' and 'asoc/topic/sun8i-codec' into asoc-next
|
|
'asoc/topic/pcm', 'asoc/topic/rockchip' and 'asoc/topic/sam9g20_wm8731' into asoc-next
|
|
'asoc/topic/dmic' and 'asoc/topic/intel' into asoc-next
|
|
|
|
|
|
'asoc/fix/dapm', 'asoc/fix/mtk' and 'asoc/fix/stm' into asoc-next
|
|
Add of dependency for STM32 ASoC drivers.
DFSDM of dependency is already inherited
from STM32_DFSDM_ADC dependency.
Signed-off-by: olivier moysan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
This driver used the wrong OF-helper when looking up the optional
capture-codec child node during probe. Instead of searching just
children of the sound node, a tree-wide depth-first search starting at
the unrelated platform node was done. Not only could this end up
matching an unrelated node or no node at all; the platform node could
also be prematurely freed since of_find_node_by_name() drops a reference
to its first argument. This particular pattern has been observed leading
to crashes after probe deferrals in other drivers.
Fix this by dropping the broken call to of_find_node_by_name() and
keeping only the second, correct lookup using of_get_child_by_name()
while taking care not to bail out if the optional node is missing.
Note that this also addresses two capture-codec node-reference leaks
(one for each of the original helper calls).
Compile tested only.
Fixes: d349caeb0510 ("ASoC: mediatek: Add second I2S on mt8173-rt5650 machine driver")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
This fix a bug in dapm_widget_power_read_file(),
where it may sent opposite order of source/sink widget
into the p->connected().
for example,
static int connected_check(source, sink);
{"w_sink", NULL, "w_source", connected_check}
the dapm_widget_power_read_file() will query p->connected()
in following case
p->conneted("w_source", "w_sink")
p->conneted("w_sink", "w_source")
we should avoid the last case, since it's the wrong order (source/sink)
as declared in snd_soc_dapm_route.
Signed-off-by: KaiChieh Chuang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current
users, which are many of them, and for new comers to decrease code
duplication.
Acked-by: Lee Jones <[email protected]>
Acked-by: Darren Hart (VMware) <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Merge misc updates from Andrew Morton:
- kasan updates
- procfs
- lib/bitmap updates
- other lib/ updates
- checkpatch tweaks
- rapidio
- ubsan
- pipe fixes and cleanups
- lots of other misc bits
* emailed patches from Andrew Morton <[email protected]>: (114 commits)
Documentation/sysctl/user.txt: fix typo
MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
MAINTAINERS: update various PALM patterns
MAINTAINERS: update "ARM/OXNAS platform support" patterns
MAINTAINERS: update Cortina/Gemini patterns
MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern
MAINTAINERS: remove ANDROID ION pattern
mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors
mm: docs: fix parameter names mismatch
mm: docs: fixup punctuation
pipe: read buffer limits atomically
pipe: simplify round_pipe_size()
pipe: reject F_SETPIPE_SZ with size over UINT_MAX
pipe: fix off-by-one error when checking buffer limits
pipe: actually allow root to exceed the pipe buffer limits
pipe, sysctl: remove pipe_proc_fn()
pipe, sysctl: drop 'min' parameter from pipe-max-size converter
kasan: rework Kconfig settings
crash_dump: is_kdump_kernel can be boolean
kernel/mutex: mutex_is_locked can be boolean
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- membarrier updates (Mathieu Desnoyers)
- SMP balancing optimizations (Mel Gorman)
- stats update optimizations (Peter Zijlstra)
- RT scheduler race fixes (Steven Rostedt)
- misc fixes and updates
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use a recently used CPU as an idle candidate and the basis for SIS
sched/fair: Do not migrate if the prev_cpu is idle
sched/fair: Restructure wake_affine*() to return a CPU id
sched/fair: Remove unnecessary parameters from wake_affine_idle()
sched/rt: Make update_curr_rt() more accurate
sched/rt: Up the root domain ref count when passing it around via IPIs
sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()
sched/core: Optimize update_stats_*()
sched/core: Optimize ttwu_stat()
membarrier/selftest: Test private expedited sync core command
membarrier/arm64: Provide core serializing command
membarrier/x86: Provide core serializing command
membarrier: Provide core serializing command, *_SYNC_CORE
lockin/x86: Implement sync_core_before_usermode()
locking: Introduce sync_core_before_usermode()
membarrier/selftest: Test global expedited command
membarrier: Provide GLOBAL_EXPEDITED command
membarrier: Document scheduler barrier requirements
powerpc, membarrier: Skip memory barrier in switch_mm()
membarrier/selftest: Test private expedited command
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Tooling fixes, plus add missing interval sampling to certain x86 PEBS
events"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Add trace/beauty/generated/ into .gitignore
perf trace: Fix call-graph output
x86/events/intel/ds: Add PERF_SAMPLE_PERIOD into PEBS_FREERUNNING_FLAGS
perf record: Fix period option handling
perf evsel: Fix period/freq terms setup
tools headers: Synchoronize x86 features UAPI headers
tools headers: Synchronize uapi/linux/sched.h
tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h
tooling headers: Synchronize updated s390 kvm UAPI headers
tools headers: Synchronize sound/asound.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"An endianness fix and a jump labels branch hint update"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qrwlock: include asm/byteorder.h as needed
jump_label: Add branch hints to static_branch_{un,}likely()
|
|
Pull networking fixes from David Miller:
1) Fix error path in netdevsim, from Jakub Kicinski.
2) Default values listed in tcp_wmem and tcp_rmem documentation were
inaccurate, from Tonghao Zhang.
3) Fix route leaks in SCTP, both for ipv4 and ipv6. From Alexey Kodanev
and Tommi Rantala.
4) Fix "MASK < Y" meant to be "MASK << Y" in xgbe driver, from Wolfram
Sang.
5) Use after free in u32_destroy_key(), from Paolo Abeni.
6) Fix two TX issues in be2net driver, from Suredh Reddy.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
be2net: Handle transmit completion errors in Lancer
be2net: Fix HW stall issue in Lancer
RDS: IB: Fix null pointer issue
nfp: fix kdoc warnings on nested structures
sample/bpf: fix erspan metadata
net: erspan: fix erspan config overwrite
net: erspan: fix metadata extraction
cls_u32: fix use after free in u32_destroy_key()
net: amd-xgbe: fix comparison to bitshift when dealing with a mask
net: phy: Handle not having GPIO enabled in the kernel
ibmvnic: fix empty firmware version and errors cleanup
sctp: fix dst refcnt leak in sctp_v4_get_dst
sctp: fix dst refcnt leak in sctp_v6_get_dst()
dwc-xlgmac: remove Jie Deng as co-maintainer
doc: Change the min default value of tcp_wmem/tcp_rmem.
samples/bpf: use bpf_set_link_xdp_fd
libbpf: add missing SPDX-License-Identifier
libbpf: add error reporting in XDP
libbpf: add function to setup XDP
tools: add netlink.h and if_link.h in tools uapi
...
|
|
Fix 'documetation' to 'documentation'
Link: http://lkml.kernel.org/r/CAKW4uUxRPZz59aWAX8ytaCB5=Qh6d_CvAnO7rYq-6NRAnQJbDA@mail.gmail.com
Signed-off-by: Kangmin Park <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Jiri Kosina <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 321737416c72d ("tty: serial: msm: Move header file into driver")
removed the .h file, update the patterns.
Link: http://lkml.kernel.org/r/2b7478bc4c35ab3ac6b06b4edd3b645a8c34a4a2.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 4c25c5d2985c ("ARM: pxa: make more mach/*.h files local") moved
the files around, update the patterns.
Link: http://lkml.kernel.org/r/a291f6f61e378a1f35e266fe4c5f646b9feeaa6a.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Tomas Cech <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 9e6c62b05c1b ("ARM: dts: rename oxnas dts files") renamed the
files, update the patterns.
[[email protected]: crunch into a single globbed term, per Arnd]
Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Daniel Golle <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Neil Armstrong <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit
ethernet") added invalid patterns. Fix it.
Link: http://lkml.kernel.org/r/65b104609e0071d0fbe0dcce3a8e6138a4cf8c25.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Hans Ulli Kroll <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 34d2f4d3a4d6 ("ARM: Use generic clkdev.h header") removed the
file, remove the pattern.
Link: http://lkml.kernel.org/r/41bfff9449a5894b94f583983b6c6cb46f4cd821.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The file drivers/staging/android/uapi/ion_test.h was removed by commit
9828282e33a0 ("staging: android: ion: Remove old platform support")
Remove the pattern.
Link: http://lkml.kernel.org/r/182debec22002c9a1de44e79a7441288942b205c.1517147485.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Acked-by: Laura Abbott <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Sumit Semwal <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are several places where parameter descriptions do no match the
actual code. Fix it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
so that kernel-doc will properly recognize the parameter and function
descriptions.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The pipe buffer limits are accessed without any locking, and may be
changed at any time by the sysctl handlers. In theory this could cause
problems for expressions like the following:
pipe_user_pages_hard && user_bufs > pipe_user_pages_hard
... since the assembly code might reference the 'pipe_user_pages_hard'
memory location multiple times, and if the admin removes the limit by
setting it to 0, there is a very brief window where processes could
incorrectly observe the limit to be exceeded.
Fix this by loading the limits with READ_ONCE() prior to use.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Willy Tarreau <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
round_pipe_size() calculates the number of pages the requested size
corresponds to, then rounds the page count up to the next power of 2.
However, it also rounds everything < PAGE_SIZE up to PAGE_SIZE.
Therefore, there's no need to actually translate the size into a page
count; we just need to round the size up to the next power of 2.
We do need to verify the size isn't greater than (1 << 31), since on
32-bit systems roundup_pow_of_two() would be undefined in that case. But
that can just be combined with the UINT_MAX check which we need anyway
now.
Finally, update pipe_set_size() to not redundantly check the return value
of round_pipe_size() for the "invalid size" case twice.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: Willy Tarreau <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A pipe's size is represented as an 'unsigned int'. As expected, writing a
value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with
EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to
32 bits, rather than failing with EINVAL as expected. (It *does* fail
with EINVAL for values above (1 << 31) but <= UINT_MAX.)
Fix this by moving the check against UINT_MAX into round_pipe_size() which
is called in both cases.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: Willy Tarreau <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With pipe-user-pages-hard set to 'N', users were actually only allowed up
to 'N - 1' buffers; and likewise for pipe-user-pages-soft.
Fix this to allow up to 'N' buffers, as would be expected.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: b0b91d18e2e9 ("pipe: fix limit checking in pipe_set_size()")
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply
to unprivileged users, as documented in both Documentation/sysctl/fs.txt
and the pipe(7) man page.
However, the capabilities are actually only checked when increasing a
pipe's size using F_SETPIPE_SZ, not when creating a new pipe. Therefore,
if pipe-user-pages-hard has been set, the root user can run into it and be
unable to create pipes. Similarly, if pipe-user-pages-soft has been set,
the root user can run into it and have their pipes limited to 1 page each.
Fix this by allowing the privileged override in both cases.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes")
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: Willy Tarreau <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|