aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-04-19drm/radeon/kms: fix rs600 tlb flushJerome Glisse1-1/+1
Typo in in flush leaded to no flush of the RS600 tlb which ultimately leaded to massive system ram corruption, with this patch everythings seems to work properly. Signed-off-by: Jerome Glisse <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-04-19drm/radeon/kms: print GPU family and device id when loadingJerome Glisse2-2/+54
This will help figuring out GPU when looking at bugs log. Signed-off-by: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-04-18drm/i915: fix tiling limits for i915 class hw v2Daniel Vetter3-14/+16
Current code is definitely crap: Largest pitch allowed spills into the TILING_Y bit of the fence registers ... :( I've rewritten the limits check under the assumption that 3rd gen hw has a 3d pitch limit of 8kb (like 2nd gen). This is supported by an otherwise totally misleading XXX comment. This bug mostly resulted in tiling-corrupted pixmaps because the kernel allowed too wide buffers to be tiled. Bug brought to the light by the xf86-video-intel 2.11 release because that unconditionally enabled tiling for pixmaps, relying on the kernel to check things. Tiling for the framebuffer was not affected because the ddx does some additional checks there ensure the buffer is within hw-limits. v2: Instead of computing the value that would be written into the hw fence registers and then checking the limits simply check whether the stride is above the 8kb limit. To better document the hw, add some WARN_ONs in i915_write_fence_reg like I've done for the i830 case (using the right limits). Signed-off-by: Daniel Vetter <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27449 Tested-by: Alexander Lam <[email protected]> Cc: [email protected] Signed-off-by: Eric Anholt <[email protected]>
2010-04-18drm/i915: set DIDL using the ACPI video output device _ADR method return.Zhang Rui1-4/+50
we used to set the DIDL in the output device detected order. But some BIOSes requires it to be initialized in the ACPI device order. e.g. the value of the first field in DIDL stands for the first ACPI video output device in ACPI namespace. Now we initialize the DIDL using the device id, i.e. _ADR return value, of each ACPI video device, if it is not 0. https://bugzilla.kernel.org/show_bug.cgi?id=15054 Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-04-18drm/i915: Fix 82854 PCI ID, and treat it like other 85XAdam Jackson2-3/+5
pci.ids and the datasheet both say it's 358e, not 35e8. Signed-off-by: Adam Jackson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-04-18drm/i915: Attempt to fix watermark setup on 85x (v2)Adam Jackson1-5/+6
IS_MOBILE() catches 85x, so we'd always try to use the 9xx FIFO sizing; since there's an explicit 85x version, this seems wrong. v2: Handle 830m correctly too. Signed-off-by: Adam Jackson <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-04-18gigaset: include cleanup cleanupTilman Schmidt9-20/+1
Commit 5a0e3ad causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: Tilman Schmidt <[email protected]> CC: Tejun Heo <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-17Merge branch 'for-linus' of ↵Linus Torvalds20-852/+871
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Ignore LVDS EDID when it is unavailabe or invalid drm/i915: Add no_lvds entry for the Clientron U800 drm/i915: Rename many remaining uses of "output" to encoder or connector. drm/i915: Rename intel_output to intel_encoder. agp/intel: intel_845_driver is an agp driver! drm/i915: introduce to_intel_bo helper drm/i915: Disable FBC on 915GM and 945GM.
2010-04-17Merge branch 'release' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: EC: Limit burst to 64 bits
2010-04-17Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds2-14/+28
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: don't warn on EAGAIN in inode reclaim xfs: ensure that sync updates the log tail correctly
2010-04-17[LogFS] Set s_bdiJoern Engel1-0/+5
Since 32a88aa1 sync() was turned into a NOP for logfs. Worse, sync() would not return an error, giving the illusion that writeout had actually happened. Afaics jffs2 was broken as well. Signed-off-by: Joern Engel <[email protected]>
2010-04-17drivers/pcmcia: Add missing local_irq_restoreJulia Lawall1-1/+3
Use local_irq_restore in this error-handling case just like in the one just below. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-04-17serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)Timur Maximov1-0/+9
Many PCMCIA GPRS modems like: Onda Edge N100E, Novaway PC98 (OEM SPC98Z), Rovermate Edgus Adaptmate-039 and others have same construction and identification: lspcmcia -vvv Product Name: Generic Modem: MD55x 1.00 Serial number: xxxxx-xxx Identification: manf_id: 0x015d card_id: 0x4c45 function: 2 (serial) prod_id(1): "Generic" (0xc49e4731) prod_id(2): "Modem: MD55x" (0x8913b110) prod_id(3): "1.00" (0x83dbf271) prod_id(4): "Serial number: xxxxx-xxx" (0x73ee9514) Serial connection to GSM module based on Elan VPU16551 PCMCIA UART with datasheet recommeded 14.7456MHz crystal oscillator. By default serial_cs set UART clock == 1843200 Hz For correct work need set clock 14745600 Hz. This quirk already present in driver, only need add device in quirk list. Signed-off-by: Timur Maximov <[email protected]> Acked-by: Alan Cox <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-04-17pcmcia: avoid late calls to pccard_validate_cisDominik Brodowski1-2/+7
pccard_validate_cis() nowadays destroys the CIS cache. Therefore, calling it after card setup should be avoided. We can't control the deprecated PCMCIA ioctl (which is only used on ARM nowadays), but we can avoid -- and report -- any other calls. Signed-off-by: Dominik Brodowski <[email protected]>
2010-04-16packet : remove init_net restrictionDaniel Lezcano1-2/+0
The af_packet protocol is used by Perl to do ioctls as reported by Stephane Riviere: "Net::RawIP relies on SIOCGIFADDR et SIOCGIFHWADDR to get the IP and MAC addresses of the network interface." But in a new network namespace these ioctl fail because it is disabled for a namespace different from the init_net_ns. These two lines should not be there as af_inet and af_packet are namespace aware since a long time now. I suppose we forget to remove these lines because we sent the af_packet first, before af_inet was supported. Signed-off-by: Daniel Lezcano <[email protected]> Reported-by: Stephane Riviere <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-16WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.Krzysztof Halasa1-0/+6
tx_queue is used as a temporary queue when not allowed to queue skb directly to the hw device driver (which may sleep). Most paths flush it before returning, but ppp_start() currently cannot. Make sure we don't leave skbs pointing to a non-existent device. Thanks to Michael Barkowski for reporting this problem. Signed-off-by: Krzysztof Hałasa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-16iwlwifi: correct 6000 EEPROM regulatory addressShanyu Zhao2-2/+6
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <[email protected]> Signed-off-by: Reinette Chatre <[email protected]>
2010-04-16iwlwifi: fix scan racesJohannes Berg5-13/+23
When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Reinette Chatre <[email protected]>
2010-04-16Merge branch 'bugzilla-15749' into releaseLen Brown1-6/+11
2010-04-16ACPI: EC: Limit burst to 64 bitsAlexey Starikovskiy1-6/+11
access_bit_width field is u8 in ACPICA, thus 256 value written to it becomes 0, causing divide by zero later. Proper fix would be to remove access_bit_width at all, just because we already have access_byte_width, which is access_bit_width / 8. Limit access width to 64 bit for now. https://bugzilla.kernel.org/show_bug.cgi?id=15749 fixes regression caused by the fix for: https://bugzilla.kernel.org/show_bug.cgi?id=14667 Signed-off-by: Alexey Starikovskiy <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-04-16xfs: don't warn on EAGAIN in inode reclaimDave Chinner1-2/+2
Any inode reclaim flush that returns EAGAIN will result in the inode reclaim being attempted again later. There is no need to issue a warning into the logs about this situation. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Alex Elder <[email protected]> Signed-off-by: Alex Elder <[email protected]>
2010-04-16xfs: ensure that sync updates the log tail correctlyDave Chinner1-12/+26
Updates to the VFS layer removed an extra ->sync_fs call into the filesystem during the sync process (from the quota code). Unfortunately the sync code was unknowingly relying on this call to make sure metadata buffers were flushed via a xfs_buftarg_flush() call to move the tail of the log forward in memory before the final transactions of the sync process were issued. As a result, the old code would write a very recent log tail value to the log by the end of the sync process, and so a subsequent crash would leave nothing for log recovery to do. Hence in qa test 182, log recovery only replayed a small handle for inode fsync transactions in this case. However, with the removal of the extra ->sync_fs call, the log tail was now not moved forward with the inode fsync transactions near the end of the sync procese the first (and only) buftarg flush occurred after these transactions went to disk. The result is that log recovery now sees a large number of transactions for metadata that is already on disk. This usually isn't a problem, but when the transactions include inode chunk allocation, the inode create transactions and all subsequent changes are replayed as we cannt rely on what is on disk is valid. As a result, if the inode was written and contains unlogged changes, the unlogged changes are lost, thereby violating sync semantics. The fix is to always issue a transaction after the buftarg flush occurs is the log iѕ not idle or covered. This results in a dummy transaction being written that contains the up-to-date log tail value, which will be very recent. Indeed, it will be at least as recent as the old code would have left on disk, so log recovery will behave exactly as it used to in this situation. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Alex Elder <[email protected]>
2010-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds3-6/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] max63xx driver depends on ioremap() [WATCHDOG] max63xx: be careful when disabling the watchdog [WATCHDOG] fixed book E watchdog period register mask. [WATCHDOG] omap4: Fix WDT Kconfig
2010-04-16Merge branch 'for-linus' of ↵Linus Torvalds9-70/+247
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: imx-ssi: do not call hrtimer_disable in trigger function ALSA: hda - Add position_fix quirk for Biostar mobo ALSA: hda - add a quirk for Clevo M570U laptop ASoC: imx-ssi: increase minimum periods to 4 ALSA: hda - Avoid invalid "Independent HP" control for VIA codecs ALSA: hda - Fix control element allocations in VIA codec parser ALSA: aaci - Fix alignment faults on ARM Cortex introduced by commit 29a4f2d3 ALSA: hda - Add fix-up for Sony VAIO with ALC269 ALSA: hda - Enhance fix-up table for Realtek codecs ALSA: usb - Fix Oops after usb-midi disconnection ALSA: hda - Fix initial capture source connections of ALC880/260 ALSA: hda - Fix setup for ALC269vb amic and dmic models ALSA: hda - Fix auto-parser of ALC269vb for HP pin NID 0x21 ASoC: imx-ssi: Use a hrtimer in FIQ mode ASoC: imx-pcm-dma-mx2: restart DMA after an error ASoC: imx-ssi: honor IMX_SSI_DMA flag ASoC: wm2000: remove unused #include <linux/version.h> ALSA: hda: Add support for Medion WIM2160
2010-04-16jfs: add jfs specific ->setattr callDmitry Monakhov4-4/+17
generic setattr not longer responsible for quota transfer. use jfs_setattr for all jfs's inodes. Signed-off-by: Dmitry Monakhov <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]>
2010-04-16jfs: fix diAllocExt error in resizing filesystemBill Pemberton1-1/+5
Resizing the filesystem would result in an diAllocExt error in some instances because changes in bmp->db_agsize would not get noticed if goto extendBmap was called. Signed-off-by: Bill Pemberton <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Cc: [email protected] Cc: [email protected]
2010-04-16[WATCHDOG] max63xx driver depends on ioremap()Geert Uytterhoeven1-1/+1
Correct fix for the "ioremap() causes build failure on S390" should have been a dependancy on HAS_IOMEM. So we add this dependancy also (and leave the driver in the ARM section for now). Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-04-16[WATCHDOG] max63xx: be careful when disabling the watchdogMarc Zyngier1-1/+6
When shutting down the watchdog timer, special care must be taken not to overwrite other bits in the register, as it may be shared with other peripherals. For example, on the Arcom Vulcan, the register is shared between the watchdog and the PCI reset line... Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-04-16[WATCHDOG] fixed book E watchdog period register mask.Luuk Paulussen1-1/+1
A previous fix changed the WDTP function to use the period directly, rather than subtracting from 63. However the mask generation was not changed, so the mask was coming out as 0. This patch fixes it. Signed-off-by: Luuk Paulussen <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-04-16[WATCHDOG] omap4: Fix WDT KconfigSantosh Shilimkar1-3/+3
This patch allows Watchdog timer to be selected for OMAP4 by fixing Kconfig entry Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-04-16Merge branch 'fix/hda' into for-linusTakashi Iwai3-33/+179
2010-04-16Merge branch 'fix/misc' into for-linusTakashi Iwai2-8/+23
2010-04-16Merge branch 'fix/asoc' into for-linusTakashi Iwai4-29/+45
2010-04-15Merge branch 'master' of ↵David S. Miller1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-15ip: Fix ip_dev_loopback_xmit()Eric Dumazet2-2/+2
Eric Paris got following trace with a linux-next kernel [ 14.203970] BUG: using smp_processor_id() in preemptible [00000000] code: avahi-daemon/2093 [ 14.204025] caller is netif_rx+0xfa/0x110 [ 14.204035] Call Trace: [ 14.204064] [<ffffffff81278fe5>] debug_smp_processor_id+0x105/0x110 [ 14.204070] [<ffffffff8142163a>] netif_rx+0xfa/0x110 [ 14.204090] [<ffffffff8145b631>] ip_dev_loopback_xmit+0x71/0xa0 [ 14.204095] [<ffffffff8145b892>] ip_mc_output+0x192/0x2c0 [ 14.204099] [<ffffffff8145d610>] ip_local_out+0x20/0x30 [ 14.204105] [<ffffffff8145d8ad>] ip_push_pending_frames+0x28d/0x3d0 [ 14.204119] [<ffffffff8147f1cc>] udp_push_pending_frames+0x14c/0x400 [ 14.204125] [<ffffffff814803fc>] udp_sendmsg+0x39c/0x790 [ 14.204137] [<ffffffff814891d5>] inet_sendmsg+0x45/0x80 [ 14.204149] [<ffffffff8140af91>] sock_sendmsg+0xf1/0x110 [ 14.204189] [<ffffffff8140dc6c>] sys_sendmsg+0x20c/0x380 [ 14.204233] [<ffffffff8100ad82>] system_call_fastpath+0x16/0x1b While current linux-2.6 kernel doesnt emit this warning, bug is latent and might cause unexpected failures. ip_dev_loopback_xmit() runs in process context, preemption enabled, so must call netif_rx_ni() instead of netif_rx(), to make sure that we process pending software interrupt. Same change for ip6_dev_loopback_xmit() Reported-by: Eric Paris <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-15firewire: cdev: fix cut+paste mistake in disclaimerStefan Richter2-2/+2
This was supposed to be generic "authors or copyright holders"; I mistakenly picked up text from a wrong file. Reported-by: Daniel K. <[email protected]> Signed-off-by: Stefan Richter <[email protected]>
2010-04-15Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds8-34/+68
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/gart: Disable GART explicitly before initialization dma-debug: Cleanup for copy-loop in filter_write() x86/amd-iommu: Remove obsolete parameter documentation x86/amd-iommu: use for_each_pci_dev Revert "x86: disable IOMMUs on kernel crash" x86/amd-iommu: warn when issuing command to uninitialized cmd buffer x86/amd-iommu: enable iommu before attaching devices x86/amd-iommu: Use helper function to destroy domain x86/amd-iommu: Report errors in acpi parsing functions upstream x86/amd-iommu: Pt mode fix for domain_destroy x86/amd-iommu: Protect IOMMU-API map/unmap path x86/amd-iommu: Remove double NULL check in check_device
2010-04-15Merge branch 'for-linus' of ↵Linus Torvalds3-35/+95
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: cdev: change license of exported header files to MIT license firewire: cdev: comment fixlet firewire: cdev: iso packet documentation firewire: cdev: fix information leak firewire: cdev: require quadlet-aligned headers for transmit packets firewire: cdev: disallow receive packets without header
2010-04-15Merge branch 'for-linus' of ↵Linus Torvalds10-93/+176
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - switch mode upon system resume Revert "Input: wacom - merge out and in prox events" Input: matrix_keypad - allow platform to disable key autorepeat Input: ALPS - add signature for HP Pavilion dm3 laptops Input: i8042 - spelling fix Input: sparse-keymap - implement safer freeing of the keymap Input: update the status of the Multitouch X driver project Input: clarify the no-finger event in multitouch protocol Input: bcm5974 - retract efi-broken suspend_resume Input: sparse-keymap - free the right keymap on error
2010-04-15Input: wacom - switch mode upon system resumePing Cheng1-5/+7
When Wacom devices wake up from a sleep, the switch mode command (wacom_query_tablet_data) is needed before wacom_open is called. wacom_query_tablet_data should not be executed inside wacom_open since wacom_open is called more than once during probe. wacom_retrieve_hid_descriptor is removed from wacom_resume due to the fact that the required descriptors are stored properly upon system resume. Reported-and-tested-by: Anton Anikin <[email protected]> Signed-off-by: Ping Cheng <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2010-04-15pcmcia: fix ioport size calculation in rsrc_nonstaticDominik Brodowski1-1/+3
Size needs to be calculated after manipulating with the start value. Reported-by: Komuro <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-04-16ASoC: imx-ssi: do not call hrtimer_disable in trigger functionSascha Hauer1-2/+8
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2010-04-15firewire: cdev: change license of exported header files to MIT licenseStefan Richter2-17/+47
Among else, this allows projects like libdc1394 to carry copies of the ABI related header files without them or distributors having to worry about effects on the project's overall license terms. Switch to MIT license as suggested by Kristian. Also update the year in the copyright statement according to source history. Cc: Jay Fenlason <[email protected]> Acked-by: Clemens Ladisch <[email protected]> Signed-off-by: Stefan Richter <[email protected]> Signed-off-by: Kristian Høgsberg <[email protected]>
2010-04-15net: dev_pick_tx() fixEric Dumazet1-2/+6
When dev_pick_tx() caches tx queue_index on a socket, we must check socket dst_entry matches skb one, or risk a crash later, as reported by Denys Fedorysychenko, if old packets are in flight during a route change, involving devices with different number of queues. Bug introduced by commit a4ee3ce3 (net: Use sk_tx_queue_mapping for connected sockets) Reported-by: Denys Fedorysychenko <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-15ALSA: hda - Add position_fix quirk for Biostar moboTakashi Iwai1-0/+1
The Biostar mobo seems to give a wrong DMA position, resulting in stuttering or skipping sounds on 2.6.34. Since the commit 7b3a177b0d4f92b3431b8dca777313a07533a710, "ALSA: pcm_lib: fix "something must be really wrong" condition", makes the position check more strictly, the DMA position problem is revealed more clearly now. The fix is to use only LPIB for obtaining the position, i.e. passing position_fix=1. This patch adds a static quirk to achieve it as default. Reported-by: Frank Griffin <[email protected]> Cc: Eric Piel <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-04-15ALSA: hda - add a quirk for Clevo M570U laptopJoerg Schirottke1-0/+1
Added the matching model for Clevo laptop M570U. Signed-off-by: Joerg Schirottke <[email protected]> Tested-by: Maximilian Gerhard <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-04-15[LogFS] Prevent mempool_destroy NULL pointer dereferenceJoern Engel4-7/+11
It would probably be better to just accept NULL pointers in mempool_destroy(). But for the current -rc series let's keep things simple. This patch was lost in the cracks for a while. Kevin Cernekee <[email protected]> had to rediscover the problem and send a similar patch because of it. :( Signed-off-by: Joern Engel <[email protected]>
2010-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: Reduce max avtab size to avoid page allocation failures
2010-04-14Merge branch 'for-linus' of ↵Linus Torvalds10-134/+212
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: use separate class for ceph sockets' sk_lock ceph: reserve one more caps space when doing readdir ceph: queue_cap_snap should always queue dirty context ceph: fix dentry reference leak in dcache readdir ceph: decode v5 of osdmap (pool names) [protocol change] ceph: fix ack counter reset on connection reset ceph: fix leaked inode ref due to snap metadata writeback race ceph: fix snap context reference leaks ceph: allow writeback of snapped pages older than 'oldest' snapc ceph: fix dentry rehashing on virtual .snap dir
2010-04-14Merge branch 'hwmon-for-linus' of ↵Linus Torvalds4-23/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (applesmc) Switch maintainers hwmon: (applesmc) Add iMac9,1 and MacBookPro2,2 support hwmon: (it87) Invalidate cache on temperature sensor change hwmon: (it87) Properly handle wrong sensor type requests hwmon: (it87) Don't arbitrarily enable temperature channels hwmon: (sht15) Properly handle the case CONFIG_REGULATOR=n hwmon: (sht15) Fix sht15_calc_temp interpolation function
Powered by cgit, Gruvboxed by Blaster4385.