aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-15Merge tag 'selinux-pr-20240513' of ↵Linus Torvalds12-126/+146
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Attempt to pre-allocate the SELinux status page so it doesn't appear to userspace that we are skipping SELinux policy sequence numbers - Reject invalid SELinux policy bitmaps with an error at policy load time - Consistently use the same type, u32, for ebitmap offsets - Improve the "symhash" hash function for better distribution on common policies - Correct a number of printk format specifiers in the ebitmap code - Improved error checking in sel_write_load() - Ensure we have a proper return code in the filename_trans_read_helper_compat() function - Make better use of the current_sid() helper function - Allow for more hash table statistics when debugging is enabled - Migrate from printk_ratelimit() to pr_warn_ratelimited() - Miscellaneous cleanups and tweaks to selinux_lsm_getattr() - More consitification work in the conditional policy space * tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: constify source policy in cond_policydb_dup() selinux: avoid printk_ratelimit() selinux: pre-allocate the status page selinux: clarify return code in filename_trans_read_helper_compat() selinux: use u32 as bit position type in ebitmap code selinux: improve symtab string hashing selinux: dump statistics for more hash tables selinux: make more use of current_sid() selinux: update numeric format specifiers for ebitmaps selinux: improve error checking in sel_write_load() selinux: cleanup selinux_lsm_getattr() selinux: reject invalid ebitmaps
2024-05-15misc: ntsync: mark driver as "broken" to prevent from buildingGreg Kroah-Hartman1-0/+1
The ntsync code is only partially enabled in the kernel at this point in time, creating the device node and that's about it. Don't confuse systems that expect to see a working ntsync interface by teasing it with this basic structure at this point in time, so mark the code as "broken" so that it is not built and enabled just yet. Once the rest of the code is accepted, this will be reverted so that the driver can be correctly built and used, but for now, this is the safest way forward. Reviewed-by: Elizabeth Figura <[email protected]> Link: https://lore.kernel.org/r/2024051450-abrasion-swizzle-550b@gregkh Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-05-15Merge tag 'lsm-pr-20240513' of ↵Linus Torvalds5-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - The security/* portion of the effort to remove the empty sentinel elements at the end of the ctl_table arrays - Update the file list associated with the LSM / "SECURITY SUBSYSTEM" entry in the MAINTAINERS file (and then fix a typo in then update) * tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: MAINTAINERS: repair file entry in SECURITY SUBSYSTEM MAINTAINERS: update the LSM file list lsm: remove the now superfluous sentinel element from ctl_table array
2024-05-15parisc: Define HAVE_ARCH_HUGETLB_UNMAPPED_AREAHelge Deller1-0/+1
Define the HAVE_ARCH_HUGETLB_UNMAPPED_AREA macro like other platforms do in their page.h files to avoid this compile warning: arch/parisc/mm/hugetlbpage.c:25:1: warning: no previous prototype for 'hugetlb_get_unmapped_area' [-Wmissing-prototypes] Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # 6.0+ Reported-by: John David Anglin <[email protected]> Tested-by: John David Anglin <[email protected]>
2024-05-15dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatibleYoshihiro Shimoda1-1/+3
Document bindings for R-Car V4H (R8A779G0) PCIe endpoint module. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Conor Dooley <[email protected]>
2024-05-15dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatibleYoshihiro Shimoda1-1/+3
Document bindings for R-Car V4H (R8A779G0) PCIe host module. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Conor Dooley <[email protected]>
2024-05-15dt-bindings: PCI: layerscape-pci: Convert to YAML formatFrank Li3-79/+269
Convert layerscape PCIe bind document to the preferred YAML format. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Frank Li <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]>
2024-05-15dt-bindings: PCI: mediatek,mt7621-pcie: Switch from deprecated pci-bus.yamlKrzysztof Kozlowski1-2/+2
dtschema package with core schemas deprecated pci-bus.yaml schema in favor of individual schemas per host, device and pci-pci. Switch Mediatek MT7621 PCIe host bridge binding to this new schema. This requires dtschema package newer than v2024.02 to work fully. v2024.02 will partially work: with a warning. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Sergio Paracuellos <[email protected]>
2024-05-15dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yamlKrzysztof Kozlowski24-24/+24
dtschema package with core schemas deprecated pci-bus.yaml schema in favor of pci-host-bridge.yaml. Update all bindings to use the latter one. The difference between pci-bus.yaml and pci-host-bridge.yaml is only in lack of "reg" property defined by the latter, which should not have any effect here, because all these bindings define the "reg". The change is therefore quite trivial, however it requires dtschema package v2024.02 or newer. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> # Renesas Reviewed-by: Rob Herring (Arm) <[email protected]> Acked-by: Sergio Paracuellos <[email protected]>
2024-05-15dt-bindings: PCI: mediatek,mt7621: Add missing child node regKrzysztof Kozlowski1-0/+3
MT7621 PCI host bridge has children which are PCI root ports. The children have "reg" property, but do not explicitly define it. Instead they rely on pci-bus.yaml schema, but that one has "reg" without any constraints. Define the "reg" for the children, so the binding will be more specific and later will allow dropping reference to deprecated pci-bus.yaml schema. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Sergio Paracuellos <[email protected]>
2024-05-15dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and ↵Krzysztof Kozlowski1-3/+0
pci-bus.yaml The binding reference common cdns-pcie-host.yaml, which already defines msi-parent and has a reference to pci-bus.yaml schema. Drop redundant pieces here to make it a bit smaller. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Sergio Paracuellos <[email protected]>
2024-05-15dt-bindings: PCI: ti,am65: Fix remaining binding warningsJan Kiszka1-0/+20
This adds the missing num-viewport, phys and phy-name properties to the schema. Based on driver code, num-viewport is required for the root complex, phys are optional. Their number corresponds to the number of lanes. The AM65x supports up to 2 lanes. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Jan Kiszka <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2024-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski4779-91086/+187413
Cross merge. Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-15rtla/timerlat: Make user-space threads the defaultDaniel Bristot de Oliveira3-7/+61
After ther -u addition, most of the known users are setting it. And it makes sense, as it adds more information, and inherits the default setup for the threads - e.g., cgroups configs. Thus, if the user-space interface is available, enable -u. Otherwise, use the in-kernel thread. Add the -k option to allow the user to request kernel-threads. Link: https://lkml.kernel.org/r/9241d3089de4091b124f780ed832a0e6646cadaa.1713968967.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla: Add the --warm-up optionDaniel Bristot de Oliveira5-40/+119
On many cases, the results right after the startup are different from the rest of the execution, biasing the results. For example, on osnoise, the scheduler might take some time to adapt to the new busy-loop workload. Add the --warm-up <seconds> option, adding a warm-up phase (in seconds) where the workload is set, but the results are discarded. Link: https://lkml.kernel.org/r/e682d5ce5af90f123bd13220f63d5c3d118a92be.1713968967.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla/timerlat: Add a summary for hist modeDaniel Bristot de Oliveira1-1/+129
Like on rtla timerlat top, add an overall summary at the bottom of timerlat hist. For instance: # timerlat hist -c 0-1 -d 10s -E 20 # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:00:10 Index IRQ-000 Thr-000 IRQ-001 Thr-001 6 1 0 0 0 7 1 0 0 0 8 1 0 1 0 9 7 0 0 0 10 16 0 0 0 11 1 0 3 0 15 0 0 3 0 16 0 0 12 0 17 0 0 28 0 18 0 2 26 0 19 1 1 80 1 over: 9973 9998 9848 10000 count: 10001 10001 10001 10001 min: 6 18 8 19 avg: 185 204 95 113 max: 428 450 341 371 ALL: IRQ Thr count: 20002 20002 min: 6 18 avg: 140 159 max: 428 450 Link: https://lkml.kernel.org/r/a6bc06c798f72127edc57d1f99da8d57e1187cee.1713968967.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Suggested-by: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla/timerlat: Add a summary for top modeDaniel Bristot de Oliveira1-0/+108
While the per-cpu values are the results to take into consideration, the overall system values are also useful. Add a summary at the bottom of rtla timerlat top showing the overall results. For instance: Timer Latency 0 00:00:10 | IRQ Timer Latency (us) | Thread Timer Latency (us) CPU COUNT | cur min avg max | cur min avg max 0 #10003 | 113 19 150 441 | 134 35 170 459 1 #10003 | 63 8 99 462 | 84 15 119 481 2 #10003 | 3 2 89 396 | 21 8 108 414 3 #10002 | 206 11 210 394 | 223 21 228 415 ---------------|----------------------------------------|--------------------------------------- ALL #40011 e0 | 2 137 462 | 8 156 481 Link: https://lkml.kernel.org/r/5eb510d6faeb4ce745e09395196752df75a2dd1a.1713968967.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Suggested-by: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla/timerlat: Use pretty formatting only on interactive ttyDaniel Bristot de Oliveira1-7/+18
timerlat top does some background/font color formatting. While useful on terminal, it breaks the output on other formats. For example, when piping the output for pastebin tools, the format strings are printed as characters. For instance: [2;37;40m Timer Latency [0;0;0m 0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us) [2;30;47mCPU COUNT | cur min avg max | cur min avg max[0;0;0m 0 #1013 | 1 0 1 54 | 5 2 4 57 1 #1013 | 3 0 1 10 | 6 2 4 15 To avoid this problem, do the formatting only if running on a tty, and in !quiet mode. Link: https://lkml.kernel.org/r/8288e1544ceab21557d5dda93a0f00339497c649.1713968967.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla/auto-analysis: Replace \t with spacesDaniel Bristot de Oliveira1-46/+63
When copying timerlat auto-analysis from a terminal to some web pages or chats, the \t are being replaced with a single ' ' or ' ', breaking the output. For example: ## CPU 3 hit stop tracing, analyzing it ## IRQ handler delay: 1.30 us (0.11 %) IRQ latency: 1.90 us Timerlat IRQ duration: 3.00 us (0.24 %) Blocking thread: 1223.16 us (99.00 %) insync:4048 1223.16 us IRQ interference 4.93 us (0.40 %) local_timer:236 4.93 us ------------------------------------------------------------------------ Thread latency: 1235.47 us (100%) Replace \t with spaces to avoid this problem. Link: https://lkml.kernel.org/r/ec7ed2b2809c22ab0dfc8eb7c805ab9cddc4254a.1713968967.git.bristot@kernel.org Cc: [email protected] Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15rtla/timerlat: Simplify "no value" printing on topDaniel Bristot de Oliveira1-12/+5
Instead of printing three times the same output, print it only once, reducing lines and being sure that all no values have the same length. It also fixes an extra '\n' when running the with kernel threads, like here: =============== %< ============== Timer Latency 0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us) CPU COUNT | cur min avg max | cur min avg max 2 #0 | - - - - | 161 161 161 161 3 #0 | - - - - | 161 161 161 161 8 #1 | 54 54 54 54 | - - - -'\n' ---------------|----------------------------------------|--------------------------------------- ALL #1 e0 | 54 54 54 | 161 161 161 =============== %< ============== This '\n' should have been removed with the user-space support that added another '\n' if not running with kernel threads. Link: https://lkml.kernel.org/r/0a4d8085e7cd706733a5dc10a81ca38b82bd4992.1713968967.git.bristot@kernel.org Cc: [email protected] Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Fixes: cdca4f4e5e8e ("rtla/timerlat_top: Add timerlat user-space support") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-15net: ks8851: Fix another TX stall caused by wrong ISR flag handlingRonald Wahl1-17/+1
Under some circumstances it may happen that the ks8851 Ethernet driver stops sending data. Currently the interrupt handler resets the interrupt status flags in the hardware after handling TX. With this approach we may lose interrupts in the time window between handling the TX interrupt and resetting the TX interrupt status bit. When all of the three following conditions are true then transmitting data stops: - TX queue is stopped to wait for room in the hardware TX buffer - no queued SKBs in the driver (txq) that wait for being written to hw - hardware TX buffer is empty and the last TX interrupt was lost This is because reenabling the TX queue happens when handling the TX interrupt status but if the TX status bit has already been cleared then this interrupt will never come. With this commit the interrupt status flags will be cleared before they are handled. That way we stop losing interrupts. The wrong handling of the ISR flags was there from the beginning but with commit 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun") the issue becomes apparent. Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun") Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Simon Horman <[email protected]> Cc: [email protected] Cc: [email protected] # 5.10+ Signed-off-by: Ronald Wahl <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-15net: bridge: mst: fix vlan use-after-freeNikolay Aleksandrov1-6/+10
syzbot reported a suspicious rcu usage[1] in bridge's mst code. While fixing it I noticed that nothing prevents a vlan to be freed while walking the list from the same path (br forward delay timer). Fix the rcu usage and also make sure we are not accessing freed memory by making br_mst_vlan_set_state use rcu read lock. [1] WARNING: suspicious RCU usage 6.9.0-rc6-syzkaller #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! ... stack backtrace: CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429 run_timer_base kernel/time/timer.c:2438 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448 __do_softirq+0x2c6/0x980 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25 RSP: 0018:ffffc90013657100 EFLAGS: 00000206 RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001 RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60 RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0 R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28 R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=fa04eb8a56fd923fc5d8 Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-15selftests: net: bridge: increase IGMP/MLD exclude timeout membership intervalNikolay Aleksandrov2-6/+6
When running the bridge IGMP/MLD selftests on debug kernels we can get spurious errors when setting up the IGMP/MLD exclude timeout tests because the membership interval is just 3 seconds and the setup has 2 seconds of sleep plus various validations, the one second that is left is not enough. Increase the membership interval from 3 to 5 seconds to make room for the setup validation and 2 seconds of sleep. Fixes: 34d7ecb3d4f7 ("selftests: net: bridge: update IGMP/MLD membership interval value") Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-15net: bridge: xmit: make sure we have at least eth header len bytesNikolay Aleksandrov1-0/+6
syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a63a1f6a062033cf0f40 Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-15Merge tag 'thermal-v6.10-rc1-2' of ↵Rafael J. Wysocki1-6/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Merge thermal driver fixes for 6.10-rc1 from Daniel Lezcano: "- Check for a NULL pointer before using it in the probe routine of the Mediatek LVTS driver (Julien Panis) - Remove the num_lvts_sensor and cal_offset fields of the lvts_ctrl_data as they are not used. These are not functional fixes but slight memory usage fix of the Mediatek LVTS driver (Julien Panis) - Fix wrong lvts_ctrl index leading to a NULL pointer dereference in the Mediatek LVTS driver (Julien Panis)" * tag 'thermal-v6.10-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
2024-05-15Merge branch 'for-6.10-base-small' into for-linusPetr Mladek31-43/+36
2024-05-15arch/topology: Fix variable naming to avoid shadowingVincent Guittot1-4/+4
Using 'hw_pressure' for local variable name is confusing in regard to the per-CPU 'hw_pressure' variable that uses the same name: include/linux/arch_topology.h:DECLARE_PER_CPU(unsigned long, hw_pressure); ... which puts it into a global scope for all code that includes <linux/topology.h>, shadowing the local variable. Rename it to avoid compiler confusion & Sparse warnings. [ mingo: Expanded the changelog. ] Reported-by: kernel test robot <[email protected]> Signed-off-by: Vincent Guittot <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Lukasz Luba <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Acked-by: Sudeep Holla <[email protected]> Cc: Linus Torvalds <[email protected]> Link: https://lore.kernel.org/r/[email protected] Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: d4dbc991714e ("sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()") Tested-by: Konrad Dybcio <[email protected]> # QC SM8550 QRD
2024-05-15platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driverHans de Goede3-0/+164
Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for USB3.1 Gen 1 and DisplayPort over Type-C alternate mode support. The ANX7428 has a microcontroller which takes care of the PD negotiation and automatically sets the builtin Crosspoint Switch to send the right signal to the 4 highspeed pairs of the Type-C connector. It also takes care of HPD and AUX channel routing for DP alternate mode. IOW the ANX7428 operates fully autonomous and to the x5-Z8350 SoC things look like there simple is a USB-3 Type-A connector and a separate DisplayPort connector. Except that the BIOS does not power on the ANX7428 at boot (meh). Add a driver to power on the ANX7428. This driver is added under drivers/platform/x86 rather than under drivers/usb/typec for 2 reasons: 1. This driver is specifically written to work with how the ANX7428 is described in the ACPI tables of the MeeGoPad x86 (Cherry Trail) devices. 2. This driver only powers on the ANX7428 and does not do anything wrt its Type-C functionality. It should be possible to tell the controller which data- and/or power-role to negotiate and to swap the role(s) after negotiation but the MeeGoPad top-set boxes always draw their power from a separate power-connector and they only support USB host-mode. So this functionality is unnecessary and due to lack of documentation this is tricky to support. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-05-15ring-buffer: Add cast to unsigned long addr passed to virt_to_page()Steven Rostedt (Google)1-1/+1
The sub-buffer pages are held in an unsigned long array, and when it is passed to virt_to_page() a cast is needed. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Fixes: 117c39200d9d ("ring-buffer: Introducing ring-buffer mapping functions") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2024-05-15f2fs: initialize last_block_in_bio variableWu Bo1-10/+13
Initialize last_block_in_bio of struct f2fs_bio_info and clean up code. Signed-off-by: Wu Bo <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2024-05-15f2fs: Add inline to f2fs_build_fault_attr() stubNathan Chancellor1-2/+2
When building without CONFIG_F2FS_FAULT_INJECTION, there is a warning from each file that includes f2fs.h because the stub for f2fs_build_fault_attr() is missing inline: In file included from fs/f2fs/segment.c:21: fs/f2fs/f2fs.h:4605:12: warning: 'f2fs_build_fault_attr' defined but not used [-Wunused-function] 4605 | static int f2fs_build_fault_attr(struct f2fs_sb_info *sbi, unsigned long rate, | ^~~~~~~~~~~~~~~~~~~~~ Add the missing inline to resolve all of the warnings for this configuration. Fixes: 4ed886b187f4 ("f2fs: check validation of fault attrs in f2fs_build_fault_attr()") Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2024-05-14Merge tag 'net-next-6.10' of ↵Linus Torvalds1953-37728/+89889
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
2024-05-14Merge tag 'firewire-updates-6.10' of ↵Linus Torvalds14-195/+1420
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "During the development period of v6.8 kernel, it became evident that there was a lack of helper utilities to trace the initial state of bus, while investigating certain PHYs compliant with different versions of IEEE 1394 specification. This series of changes includes the addition of tracepoints events, provided by 'firewire' subsystem. These events enable tracing of how firewire core functions during bus reset and asynchronous communication over IEEE 1394 bus. When implementing the tracepoints events, it was found that the existing serialization and deserialization helpers for several types of asynchronous packets are scattered across both firewire-core and firewire-ohci kernel modules. A set of inline functions is newly added to address it, along with some KUnit tests, serving as the foundation for the tracepoints events. This renders the dispersed code obsolete. The remaining changes constitute the final steps in phasing out the usage of deprecated PCI MSI APIs, in continuation from the previous version" * tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits) firewire: obsolete usage of *-objs in Makefile for KUnit test firewire: core: remove flag and width from u64 formats of tracepoints events firewire: core: fix type of timestamp for async_inbound_template tracepoints events firewire: core: add tracepoint event for handling bus reset Revert "firewire: core: option to log bus reset initiation" firewire: core: add tracepoints events for initiating bus reset firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter firewire: ohci: add bus-reset event for initial set of handled irq firewire: core: add tracepoints event for asynchronous inbound phy packet firewire: core/cdev: add tracepoints events for asynchronous phy packet firewire: core: add tracepoints events for asynchronous outbound response firewire: core: add tracepoint event for asynchronous inbound request firewire: core: add tracepoints event for asynchronous inbound response firewire: core: add tracepoints events for asynchronous outbound request firewire: core: add support for Linux kernel tracepoints firewire: core: replace local macros with common inline functions for isochronous packet header firewire: core: add common macro to serialize/deserialize isochronous packet header firewire: core: obsolete tcode check macros with inline functions firewire: ohci: replace hard-coded values with common macros firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header ...
2024-05-14Merge tag 'for-6.10/dm-changes' of ↵Linus Torvalds4-68/+97
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add a dm-crypt optional "high_priority" flag that enables the crypt workqueues to use WQ_HIGHPRI. - Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow for improved visibility and controls over IO and crypt workqueues. - Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE. This limit isn't needed given that the block core provides late bio splitting if bio exceeds underlying limits (e.g. max_segment_size). - Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND. - Fix various issues with dm-delay target (ranging from a resource teardown fix, a fix for hung task when using kthread mode, and other improvements that followed from code inspection). * tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm-delay: remove timer_lock dm-delay: change locking to avoid contention dm-delay: fix max_delay calculations dm-delay: fix hung task introduced by kthread mode dm-delay: fix workqueue delay_timer race dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue dm: use queue_limits_set dm-crypt: stop constraining max_segment_size to PAGE_SIZE dm-crypt: export sysfs of all workqueues dm-crypt: add the optional "high_priority" flag
2024-05-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds154-2037/+2168
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
2024-05-14Merge tag 'ata-6.10-rc1' of ↵Linus Torvalds9-132/+139
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Damien Le Moal: - Convert the bindings for the imx-pata and ahci-da850 drivers to DT schemas (from Animesh) - Correct the code to handle HAS_IOPORT dependencies and conditionally compile drivers as needed (from Niklas) - Correct the legacy_exit() function in the pata_legacy driver to properly handle cleanups on driver exit (from Sergey) - Small code simplification removing the ata_exec_internal_sg() function and folding it into its only caller (from me) * tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_legacy: make legacy_exit() work again ata: libata-core: Remove ata_exec_internal_sg() ata: add HAS_IOPORT dependencies dt-bindings: ata: ahci-da850: Convert to dtschema dt-bindings: ata: imx-pata: Convert to dtschema
2024-05-14Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds1-6/+1
Pull fsverity update from Eric Biggers: "Fix a false positive kmemleak warning" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: use register_sysctl_init() to avoid kmemleak warning
2024-05-14Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds1-6/+26
Pull fscrypt update from Eric Biggers: "Improve the performance of opening unencrypted files on filesystems that support fscrypt" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: try to avoid refing parent dentry in fscrypt_file_open
2024-05-14Merge tag 'for-linus-6.10-ofs1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs update from Mike Marshall: "Fix out-of-bounds fsid access. Small fix to quiet warnings from string fortification helpers, suggested by Arnd Bergmann" * tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: fix out-of-bounds fsid access
2024-05-14Merge tag 'gfs2-for-v6.10' of ↵Linus Torvalds18-258/+320
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Properly fix the glock shrinker this time: it broke in commit "gfs2: Make glock lru list scanning safer" and commit "gfs2: fix glock shrinker ref issues" wasn't actually enough to fix it - On unmount, keep glocks around long enough that no more dlm callbacks can occur on them - Some more folio conversion patches from Matthew Wilcox - Lots of other smaller fixes and cleanups * tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits) gfs2: make timeout values more explicit gfs2: Convert gfs2_aspace_writepage() to use a folio gfs2: Add a migrate_folio operation for journalled files gfs2: Simplify gfs2_read_super gfs2: Convert gfs2_page_mkwrite() to use a folio gfs2: gfs2_freeze_unlock cleanup gfs2: Remove and replace gfs2_glock_queue_work gfs2: do_xmote fixes gfs2: finish_xmote cleanup gfs2: Unlock fewer glocks on unmount gfs2: Fix potential glock use-after-free on unmount gfs2: Remove ill-placed consistency check gfs2: Fix lru_count accounting gfs2: Fix "Make glock lru list scanning safer" Revert "gfs2: fix glock shrinker ref issues" gfs2: Fix "ignore unlock failures after withdraw" gfs2: Get rid of unnecessary test_and_set_bit gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw ...
2024-05-14Merge tag 'dlm-6.10' of ↵Linus Torvalds25-1509/+1382
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This set includes some small fixes, and some big internal changes: - Fix a long standing race between the unlock callback for the last lkb struct, and removing the rsb that became unused after the final unlock. This could lead different nodes to inconsistent info about the rsb master node. - Remove unnecessary refcounting on callback structs, returning to the way things were done in the past. - Do message processing in softirq context. This allows dlm messages to be cleared more quickly and efficiently, reducing long lists of incomplete requests. A future change to run callbacks directly from this context will make this more effective. - The softirq message processing involved a number of patches changing mutexes to spinlocks and rwlocks, and a fair amount of code re-org in preparation. - Use an rhashtable for rsb structs, rather than our old internal hash table implementation. This also required some re-org of lists and locks preparation for the change. - Drop the dlm_scand kthread, and use timers to clear unused rsb structs. Scanning all rsb's periodically was a lot of wasted work. - Fix recent regression in logic for copying LVB data in user space lock requests" * tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits) dlm: return -ENOMEM if ls_recover_buf fails dlm: fix sleep in atomic context dlm: use rwlock for lkbidr dlm: use rwlock for rsb hash table dlm: drop dlm_scand kthread and use timers dlm: do not use ref counts for rsb in the toss state dlm: switch to use rhashtable for rsbs dlm: add rsb lists for iteration dlm: merge toss and keep hash table lists into one list dlm: change to single hashtable lock dlm: increment ls_count for dlm_scand dlm: do message processing in softirq context dlm: use spin_lock_bh for message processing dlm: remove schedule in receive path dlm: convert ls_recv_active from rw_semaphore to rwlock dlm: avoid blocking receive at the end of recovery dlm: convert res_lock to spinlock dlm: convert ls_waiters_mutex to spinlock dlm: drop mutex use in waiters recovery dlm: add new struct to save position in dlm_copy_master_names ...
2024-05-14Merge tag 'for-6.10-tag' of ↵Linus Torvalds52-2346/+2639
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "This update brings a few minor performance improvements, otherwise there's a lot of refactoring, cleanups and other sort of not user visible changes. Performance improvements: - inline b-tree locking functions, improvement in metadata-heavy changes - relax locking on a range that's being reflinked, allows read operations to run in parallel - speed up NOCOW write checks (throughput +9% on a sample test) - extent locking ranges have been reduced in several places, namely around delayed ref processing Core: - more page to folio conversions: - relocation - send - compression - inline extent handling - super block write and wait - extent_map structure optimizations: - reduced structure size - code simplifications - add shrinker for allocated objects, the numbers can go high and could exhaust memory on smaller systems (reported) as they may not get an opportunity to be freed fast enough - extent locking optimizations: - reduce locking ranges where it does not seem to be necessary and are safe due to other means of synchronization - potential improvements due to lower contention, allocation/freeing and state management operations of extent state tracking structures - delayed ref cleanups and simplifications - updated trace points - improved error handling, warnings and assertions - cleanups and refactoring, unification of error handling paths" * tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits) btrfs: qgroup: fix initialization of auto inherit array btrfs: count super block write errors in device instead of tracking folio error state btrfs: use the folio iterator in btrfs_end_super_write() btrfs: convert super block writes to folio in write_dev_supers() btrfs: convert super block writes to folio in wait_dev_supers() bio: Export bio_add_folio_nofail to modules btrfs: remove duplicate included header from fs.h btrfs: add a cached state to extent_clear_unlock_delalloc btrfs: push extent lock down in submit_one_async_extent btrfs: push lock_extent down in cow_file_range() btrfs: move can_cow_file_range_inline() outside of the extent lock btrfs: push lock_extent into cow_file_range_inline btrfs: push extent lock into cow_file_range btrfs: push extent lock into run_delalloc_cow btrfs: remove unlock_extent from run_delalloc_compressed btrfs: push extent lock down in run_delalloc_nocow btrfs: adjust while loop condition in run_delalloc_nocow btrfs: push extent lock into run_delalloc_nocow btrfs: push the extent lock into btrfs_run_delalloc_range btrfs: lock extent when doing inline extent in compression ...
2024-05-14Merge tag 'erofs-for-6.10-rc1' of ↵Linus Torvalds11-212/+555
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs updates from Gao Xiang: "The LZ4 global buffer count is now configurable instead of the previous per-CPU buffers, which is useful for bare metals with hundreds of CPUs. A reserved buffer pool for LZ4 decompression can also be enabled to minimize the tail allocation latencies under the low memory scenarios with heavy memory pressure. In addition, Zstandard algorithm is now supported as an alternative since it has been requested by users for a while. There are some random cleanups as usual. Summary: - Make LZ4 global buffers configurable instead of per-CPU buffers - Add a reserved buffer pool for LZ4 decompression for lower latencies - Support Zstandard compression algorithm as an alternative - Derive fsid from on-disk UUID for .statfs() if possible - Minor cleanups" * tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: Zstandard compression support erofs: clean up z_erofs_load_full_lcluster() erofs: derive fsid from on-disk UUID for .statfs() if possible erofs: add a reserved buffer pool for lz4 decompression erofs: do not use pagepool in z_erofs_gbuf_growsize() erofs: rename per-CPU buffers to global buffer pool and make it configurable erofs: rename utils.c to zutil.c
2024-05-14smb3: fix perf regression with cached writes with netfs conversionSteve French1-3/+0
Write through mode is for cache=none, not for default (when caching is allowed if we have a lease). Some tests were running much, much more slowly as a result of disabling caching of writes by default. Reviewed-by: David Howells <[email protected]> Reviewed-by: Enzo Matsumiya <[email protected]> Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Signed-off-by: Steve French <[email protected]>
2024-05-14Merge tag 'efi-next-for-v6.10' of ↵Linus Torvalds9-95/+33
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Only a handful of changes this cycle, consisting of cleanup work and a low-prio bugfix: - Additional cleanup by Tim for the efivarfs variable name length confusion - Avoid freeing a bogus pointer when virtual remapping is omitted in the EFI boot stub" * tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: libstub: only free priv.runtime_map when allocated efi: Clear up misconceptions about a maximum variable name size efivarfs: Remove unused internal struct members Documentation: Mark the 'efivars' sysfs interface as removed efi: pstore: Request at most 512 bytes for variable names
2024-05-14Merge tag 'hid-for-linus-2024051401' of ↵Linus Torvalds66-1093/+8301
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Firmware loading from host support in intel-ish driver, needed to support Lunar Lake and later (Zhang Lixu) - updates to HID-BPF infrastructure, with some of the specific fixes (e.g. rdesc fixups) abstracted into separate BPF programs for consumption from libevdev/udev-hid-bpf (Benjamin Tissoires) - support for Deck IMU in hid-steam (Max Maisel) - fixes for better support of 3rd party playstation DS4 controllers (Max Staudt) - support for missing mappings and codes from HUT 1.5 in hid-debug (Thomas Kuehne) - initial support for ROG Ally and ROG X13 devices (Luke D. Jones) - full support for WinWing Orion2 (Ivan Gorinov) * tag 'hid-for-linus-2024051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (74 commits) selftests/hid: skip tests with HID-BPF if udev-hid-bpf is not installed selftests/hid: add tests for the Raptor Mach 2 joystick selftests/hid: move the gamepads definitions in the test file selftests/hid: import base_gamepad.py from hid-tools selftests/hid: add Huion Kamvas Pro 19 tests selftests/hid: tablets: also check for XP-Pen offset correction selftests/hid: tablets: add a couple of XP-PEN tablets selftests/hid: tablets: reduce the number of pen state selftests/hid: add support for HID-BPF pre-loading before starting a test selftests/hid: import base_device.py from hid-tools HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2 HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19 HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over Bluetooth HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPen HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouse HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16 HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24 HID: do not assume HAT Switch logical max < 8 HID: amd_sfh: Use amd_get_c2p_val() to read C2P register ...
2024-05-14Merge tag 'gpio-updates-for-v6.10-rc1' of ↵Linus Torvalds31-235/+622
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski "This was a quiet release cycle for the GPIO tree and so this pull-request is relatively small. We have one new driver, some minor improvements to the GPIO core code and across several drivers, some DT and documentation updates but in general nothing stands out or is controversial. All changes have spent time in next with no reported issues (or ones that were quickly fixed). GPIO core: - remove more unused legacy interfaces (after converting the last remaining users to better alternatives) - update kerneldocs - improve error handling and log messages in GPIO ACPI code - remove dead code (always true checks) from GPIOLIB New drivers: - add a driver for Intel Granite Rapids-D vGPIO Driver improvements: - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24 - provide an ID table for gpio-cros-ec to avoid a driver name fallback check - add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks - switch to using dynamic GPIO base in gpio-brcmstb - fix irq handling in gpio-npcm-sgpio - switch to memory mapped IO accessors in gpio-sch DT bindings: - add support for gpio-ranges to gpio-brcmstb - add support for a new model and the gpio-line-names property to gpio-mpfs Documentation: - replace leading tabs with spaces in code blocks - fix typos" * tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits) gpio: nuvoton: Fix sgpio irq handle error gpiolib: Discourage to use formatting strings in line names gpio: brcmstb: add support for gpio-ranges gpio: of: support gpio-ranges for multiple gpiochip devices dt-bindings: gpio: brcmstb: add gpio-ranges gpio: Add Intel Granite Rapids-D vGPIO driver gpio: brcmstb: Use dynamic GPIO base numbers gpiolib: acpi: Set label for IRQ only lines gpiolib: acpi: Add fwnode name to the GPIO interrupt label gpiolib: Get rid of never false gpio_is_valid() calls gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() gpiolib: acpi: Simplify error handling in __acpi_find_gpio() gpiolib: acpi: Extract __acpi_find_gpio() helper gpio: sch: Utilise temporary variable for struct device gpio: sch: Switch to memory mapped IO accessors gpio: regmap: Use -ENOTSUPP consistently gpio: pcie-idio-24: Use -ENOTSUPP consistently Documentation: gpio: Replace leading TABs by spaces in code blocks gpiolib: acpi: Check for errors first in acpi_find_gpio() ...
2024-05-14Merge tag 'pwm/for-6.10-rc1' of ↵Linus Torvalds18-857/+830
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "Apart for the normal updates for dt bindings, cleanups and support for new device variants to existing drivers this completes the conversion to pwmchip_alloc() which was started in the v6.9 development cycle. Using pwmchip_alloc() is a precondition to the character device support which allows easier and faster access to PWM devices. However there are some issues I want to clean up before including it in mainline, so this isn't contained here despite it was in next for some time. Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George Stark, Jerome Brunet and Varshini Rajendran for their contributions. Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A. R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch review" * tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits) pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0 dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice dt-bindings: pwm: bcm2835: Do not require pwm-cells twice pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating pwm: meson: Add check for error from clk_round_rate() pwm: meson: Drop unneeded check in .get_state() dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC pwm: meson: Add generic compatible for meson8 to sm1 pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get() pwm: bcm2835: Introduce a local variable for &pdev->dev pwm: stm32: Calculate prescaler with a division instead of a loop pwm: stm32: Fix for settings using period > UINT32_MAX pwm: stm32: Improve precision of calculation in .apply() pwm: stm32: Add error messages in .probe()'s error paths pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata() pwm: Don't check pointer for being non-NULL after use ...
2024-05-14Merge tag 'for-6.10-rc1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux Pull hte/timestamp update from Dipen Patel: - Improve hte-test driver platform remove callback by replacing it with the remove_new which returns void instead * tag 'for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: Convert to platform remove callback returning void
2024-05-14Merge tag 'hwmon-for-v6.10' of ↵Linus Torvalds147-964/+2578
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon XDP710 - EC Chip driver for Lenovo ThinkStation motherboards - Analog Devices ADP1050 Improved support for existing drivers: - emc1403: Convert to with_info API; Support for EMC1428 and EMC1438 - nzxt-kraken3: Support for NZXT Kraken 2023 - aquacomputer_d5next: Support for Octo flow sensors - pmbus/adm1275: Support for ADM1281 - dell-smm: Supportt for Precision 7540 and G5 5505 Other notable cleanup: - max6639: Use regmap - Remove unused structure fields from multiple drivers - Drop explicit initialization of struct i2c_device_id::driver_data to zero - Improve configuration mode handling in it87 driver - jc42: Drop support for I2C_CLASS_SPD - Various conversions to devicetree schema - Add HAS_IOPORT dependencies as needed Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach, pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers" * tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits) hwmon: (nzxt-kraken3) Bail out for unsupported device variants hwmon: (emc1403) Add support for EMC1428 and EMC1438. hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2) hwmon: (emc1403) Add support for conversion interval configuration hwmon: (emc1403) Support 11 bit accuracy hwmon: (emc1403) Convert to with_info API hwmon: (max6639) Use regmap hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device hwmon: (stts751) Remove an unused field in struct stts751_priv hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 hwmon: (max31790) revise the scale to write pwm hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models hwmon: (nzxt-kraken3) Decouple device names from kinds hwmon: (it87) Remove tests nolonger required hwmon: (it87) Test for chipset before entering configuration mode hwmon: (it87) Do not enter configuration mode for some chiptypes hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement hwmon: (pmbus) Add support for Infineon XDP710 dt-bindings: hwmon: Add infineon xdp710 driver bindings ...