aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-11ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCsMiquel Raynal1-17/+51
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-11ata: ahci: mvebu: remove stale commentMiquel Raynal1-5/+0
For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-11ata: libahci_platform: comply to PHY frameworkMiquel Raynal2-0/+15
Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede <[email protected]> Suggested-by: Grzegorz Jaszczyk <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-11Merge branch 'i2c/for-current' of ↵Linus Torvalds2-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has one core and one driver bugfix for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Fix Maximum transfer size i2c: dev: prevent adapter retries and timeout being set as minus value
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds8-9/+59
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds8-18/+24
Pull ceph updates from Ilya Dryomov: "A patch to allow setting abort_on_full and a fix for an old "rbd unmap" edge case, marked for stable" * tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client: rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set ceph: use vmf_error() in ceph_filemap_fault() libceph: allow setting abort_on_full for rbd
2019-01-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds43-697/+797
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "Tooling changes only: fixes and a few stray improvements. Most of the diffstat is dominated by a PowerPC related fix of system call trace output beautification that allows us to (again) use the UAPI header version and sync up with the kernel's version of PowerPC system call names in the arch/powerpc/kernel/syscalls/syscall.tbl header" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) tools headers powerpc: Remove unistd.h perf powerpc: Rework syscall table generation perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols tools include uapi: Sync linux/if_link.h copy with the kernel sources tools include uapi: Sync linux/vhost.h with the kernel sources tools include uapi: Sync linux/fs.h copy with the kernel sources perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h tools include uapi: Grab a copy of linux/mount.h perf top: Lift restriction on using callchains without "sym" in --sort tools lib traceevent: Remove tep_data_event_from_type() API tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian() tools lib traceevent: Changed return logic of tep_register_event_handler() API tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs tools lib traceevent: Rename struct cmdline to struct tep_cmdline tools lib traceevent: Initialize host_bigendian at tep_handle allocation tools lib traceevent: Introduce new libtracevent API: tep_override_comm() perf tests: Add a test for the ARM 32-bit [vectors] page perf tools: Make find_vdso_map() more modular perf trace: Fix alignment for [continued] lines perf trace: Fix ')' placement in "interrupted" syscall lines ...
2019-01-11x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is ↵Vitaly Kuznetsov1-2/+1
not backed Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when vmptr address is not backed is wrong, we end up advancing RIP twice. Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page") Reported-by: Cornelia Huck <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11Documentation/virtual/kvm: Update URL for AMD SEV API specificationChristophe de Dinechin1-1/+1
The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst is no longer valid, replaced space with underscore. Signed-off-by: Christophe de Dinechin <[email protected]> Reviewed-by: Brijesh Singh <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11KVM/VMX: Avoid return error when flush tlb successfully in the ↵Lan Tianyu1-1/+1
hv_remote_flush_tlb_with_range() The "ret" is initialized to be ENOTSUPP. The return value of __hv_remote_flush_tlb_with_range() will be Or with "ret" when ept table potiners are mismatched. This will cause return ENOTSUPP even if flush tlb successfully. This patch is to fix the issue and set "ret" to 0. Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.") Signed-off-by: Lan Tianyu <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11kvm: sev: Fail KVM_SEV_INIT if already initializedDavid Rientjes1-0/+3
By code inspection, it was found that multiple calls to KVM_SEV_INIT could deplete asid bits and overwrite kvm_sev_info's regions_list. Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this should likely be fixed anyway. This code is serialized by kvm->lock. Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command") Reported-by: Cfir Cohen <[email protected]> Signed-off-by: David Rientjes <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11KVM: validate userspace input in kvm_clear_dirty_log_protect()Tomas Bortoli1-2/+7
The function at issue does not fully validate the content of the structure pointed by the log parameter, though its content has just been copied from userspace and lacks validation. Fix that. Moreover, change the type of n to unsigned long as that is the type returned by kvm_dirty_bitmap_bytes(). Signed-off-by: Tomas Bortoli <[email protected]> Reported-by: [email protected] [Squashed the fix from Paolo. - Radim.] Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11KVM: x86: Fix bit shifting in update_intel_pt_cfgGustavo A. R. Silva1-1/+1
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is being left shifted more than 32 bits, the behavior is undefined. Fix this by adding suffix ULL to integer 0xf. Addresses-Coverity-ID: 1476095 ("Bad bit shift operation") Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration") Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Wei Yang <[email protected]> Reviewed-by: Luwei Kang <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2019-01-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds11-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL to CONFIG_X86_RESCTRL" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE x86/cache: Rename config option to CONFIG_X86_RESCTRL samples/seccomp: Fix 32-bit build
2019-01-11Merge tag 'acpi-5.0-rc2' of ↵Linus Torvalds4-11/+59
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Fix a build failure introduced recently, fix the xpower PMIC ACPI driver, clean up the handling of duplicate entries in _PRx power resource lists and fix addresses in NUMA-related messages on 32-bit with PAE. Specifics: - Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that can occur since ACPI can be built without PCI now (Sinan Kaya). - Clean up the handling of duplicate entries in power resource lists returned by _PRx evaluation to avoid triggering WARN_ON() on attempts to add duplicate symlinks in sysfs (Hans de Goede). - Fix issues with the TS current-source switching on systems using the xpower PMIC by avoiding to update unrelated bits in the TS pin-ctrl register and avoiding to unconditionally enable TS current-source on systems where it is not used (Hans de Goede). - Fix addresses in NUMA-related messages on 32-bit with PAE which can be truncated due to integer type conversions (Chao Fan)" * tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: xpower: Fix TS-pin current-source handling ACPI: NUMA: Use correct type for printing addresses on i386-PAE ACPI: power: Skip duplicate power resource references in _PRx ACPI: Fix build failure when CONFIG_NLS is set to 'n'
2019-01-11Merge tag 'pm-5.0-rc2' of ↵Linus Torvalds9-26/+89
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix fallout after starting to use hrtimers in the runtime PM framework, fix a few cpufreq issues, fix a recently broken reference to cpuidle documentation, update MAINTAINERS entries for cpufreq and cpuidle and make the recently added system suspend and resume support in devfreq actually work. Specifics: - Prevent integer overflows from occurring on 32-bit when converting milliseconds to nanoseconds in the runtime PM framework and update comments that still refer to jiffies in it (Vincent Guittot, Ladislav Michl). - Fix the SCMI cpufreq driver to always use the same frequency units for arch_set_freq_scale() and make the scale-invariant load tracking acutally work with this driver (Quentin Perret). - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers broken during the 4.20 defelopment cycle (Viresh Kumar). - Prevent the cpufreq core from attempting to return the current frequency of offline CPUs (Sudeep Holla). - Add devfreq suspend and resume hooks (missed previously) to the PM core to make the recently added system suspend and resume support in devfreq actually work (Lukasz Luba). - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add references to new/current documentation to them (Rafael Wysocki). - Fix a recently broken reference to cpuidle documentation (Otto Sabart)" * tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix autosuspend_delay on 32bits arch PM-runtime: Fix 'jiffies' in comments after switch to hrtimers cpufreq: scmi: Fix frequency invariance in slow path doc: trace: fix reference to cpuidle documentation file cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpuidle / Documentation: Update cpuidle MAINTAINERS entry cpufreq / Documentation: Update cpufreq MAINTAINERS entry PM: sleep: call devfreq suspend/resume
2019-01-11Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds18-119/+221
Pull drm fixes from Dave Airlie: "Not a huge amount for rc2, assume the usual quiet period, and rc3 will be most of it. amdgpu: - Powerplay fixes - Virtual display pinning fixes - Golden register updates for Vega - Pitch and gem size validation fixes - SR-IOV init error fix - Pagetables in system RAM disable for some Raven system - DP-MST resume fixes tc358767 bridge: - fix to work with displayport connector" * tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits) drm/amdgpu: disable system memory page tables for now drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 drm/bridge: tc358767: use DP connector if no panel set drm/bridge: tc358767: fix output H/V syncs drm/bridge: tc358767: reject modes which require too much BW drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value drm/bridge: tc358767: fix single lane configuration drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE drm/bridge: tc358767: add bus flags drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume() drm/amdgpu: Don't fail resume process if resuming atomic state fails drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume() drm/amdgpu: validate user GEM object size drm/amdgpu: validate user pitch alignment drm/amd/powerplay: drop the unnecessary uclk hard min setting drm/amd/powerplay: avoid possible buffer overflow drm/amd/powerplay: create pp_od_clk_voltage device file under OD support drm/amd/powerplay: update OD support flag for SKU with no OD capabilities drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG ...
2019-01-11tty: Don't hold ldisc lock in tty_reopen() if ldisc presentDmitry Safonov1-7/+13
Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <[email protected]> Reported-by: Lukas F. Hartmann <[email protected]> Tested-by: Lukas F. Hartmann <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11cifs: update internal module version numberSteve French1-1/+1
To 2.16 Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix error paths in writeback codePavel Shilovsky4-9/+56
This patch aims to address writeback code problems related to error paths. In particular it respects EINTR and related error codes and stores and returns the first error occurred during writeback. Signed-off-by: Pavel Shilovsky <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Move credit processing to mid callbacks for SMB3Pavel Shilovsky1-17/+34
Currently we account for credits in the thread initiating a request and waiting for a response. The demultiplex thread receives the response, wakes up the thread and the latter collects credits from the response buffer and add them to the server structure on the client. This approach is not accurate, because it may race with reconnect events in the demultiplex thread which resets the number of credits. Fix this by moving credit processing to new mid callbacks that collect credits granted by the server from the response in the demultiplex thread. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix credits calculation for cancelled requestsPavel Shilovsky2-2/+27
If a request is cancelled, we can't assume that the server returns 1 credit back. Instead we need to wait for a response and process the number of credits granted by the server. Create a separate mid callback for cancelled request, parse the number of credits in a response buffer and add them to the client's credits. If the didn't get a response (no response buffer available) assume 0 credits granted. The latter most probably happens together with session reconnect, so the client's credits are adjusted anyway. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: Fix potential OOB access of lock element arrayRoss Lagerwall2-6/+6
If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-11cifs: Limit memory used by lock request calls to a pageRoss Lagerwall2-0/+12
The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: move large array from stack to heapAurelien Aptel2-14/+32
This addresses some compile warnings that you can see depending on configuration settings. Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Do not hide EINTR after sending network packetsPavel Shilovsky1-1/+1
Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: <[email protected]> Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11powerpc/4xx/ocm: Fix fix for phys_addr_t printf warningsMichael Ellerman1-3/+3
My recent commit to fix the printf warnings in ocm.c got the format specifier wrong, because I copied it from the documentation without realising the square brackets are not meant as literals. This results in the address being suffixed with a literal "[p]". Actually tested this time: # cat info /sys/kernel/debug/ppc4xx_ocm PhysAddr : 0x0000000400040000 ... NC.PhysAddr : 0x0000000400040000 ... C.PhysAddr : 0x0000000000000000 Fixes: 52b88fa1e8c7 ("powerpc/4xx/ocm: Fix phys_addr_t printf warnings") Reported-by: Christian Lamparter <[email protected]> Tested-by: Christian Lamparter <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-01-11powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()Frederic Barrat1-1/+2
With a recent change around IOMMU group, a system with an opencapi adapter is no longer booting and we get a kernel oops: BUG: Kernel NULL pointer dereference at 0x00000028 Faulting instruction address: 0xc0000000000aa38c ... NIP pnv_try_setup_npu_table_group+0x1c/0x1a0 LR pnv_pci_ioda_fixup+0x1f8/0x660 Call Trace: pnv_try_setup_npu_table_group+0x60/0x pnv_pci_ioda_fixup+0x20c/0x660 pcibios_resource_survey+0x2c8/0x31c pcibios_init+0xb0/0xe4 do_one_initcall+0x64/0x264 kernel_init_freeable+0x36c/0x468 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x68 An opencapi device is using a device PE, so the current code breaks because pe->pbus is not defined. More generally, there's no need to define an IOMMU group for opencapi, as the device sends real addresses directly (admittedly, the virtualization story is yet to be written). So let's fix it by skipping the IOMMU group setup for opencapi PHBs. Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Frederic Barrat <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-01-11powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEMBreno Leitao1-3/+4
Commit e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") moved a code block around and this block uses a 'msr' variable outside of the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when CONFIG_PPC_TRANSACTION_MEM is not defined. error: 'msr' undeclared (first use in this function) This is not causing a compilation error in the mainline kernel, because 'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set: #define MSR_TM_ACTIVE(x) 0 This patch just fixes this issue avoiding the 'msr' variable usage outside the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the MSR_TM_ACTIVE() definition. Cc: [email protected] Reported-by: Christoph Biedl <[email protected]> Fixes: e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") Signed-off-by: Breno Leitao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-01-11powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.Christophe Leroy1-1/+2
Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI. Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-01-11powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()Dan Carpenter1-1/+1
There is a typo so we accidentally allocate enough memory for a pointer when we wanted to allocate enough for a struct. Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-01-11ARM: integrator: impd1: use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]>
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro1-1/+3
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11ACPI/IORT: Fix rc_dma_get_range()Jean-Philippe Brucker1-1/+2
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger <[email protected]> Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Eric Auger <[email protected]> Acked-by: Robin Murphy <[email protected]> Cc: [email protected] Cc: Will Deacon <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Sudeep Holla <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11Revert "staging: rtl8723bs: Mark ACPI table declaration as used"Greg Kroah-Hartman1-1/+1
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c. Turns out it is not needed at all, a fix for clang was made and accepted upstream in that project that makes this change unnecessary. So revert it. Reported-by: Nick Desaulniers <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11Merge tag 'drm-intel-fixes-2019-01-11' of ↵Daniel Vetter10-39/+98
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes i915 fixes for v5.0-rc2: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix Signed-off-by: Daniel Vetter <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10-1' of ↵Daniel Vetter3-58/+82
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Second pull request, drm-misc-fixes for v5.0-rc2: - Fix fb-helper to work correctly with SDL 1.2 bugs. - Fix lockdep warning in the atomic ioctl and setproperty. Signed-off-by: Daniel Vetter <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge branches 'acpi-pci', 'acpi-power' and 'acpi-misc'Rafael J. Wysocki3-3/+26
* acpi-pci: ACPI: Fix build failure when CONFIG_NLS is set to 'n' * acpi-power: ACPI: power: Skip duplicate power resource references in _PRx * acpi-misc: ACPI: NUMA: Use correct type for printing addresses on i386-PAE
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki8-22/+82
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-11Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie3-5/+12
3 nouveau fixes: one backlight, falcon register access, and a fan fix. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
2019-01-11Merge tag 'perf-core-for-mingo-5.0-20190110' of ↵Ingo Molnar7-419/+470
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: perf trace: Ravi Bangoria: - Rework PowerPC syscall table generation, now using a .tbl file just like x86_64 and S/390, also silencing a tools build warning about headers out of sync with the kernel sources. tools include uapi: Arnaldo Carvalho de Melo: - Sync linux/if_link.h copy with the kernel sources, silencing a build warning. perf top: Arnaldo Carvalho de Melo: - Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange Pi Zero ARM board, just like with other symbols in other arches. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-01-11drm/nouveau/falcon: avoid touching registers if engine is offIlia Mirkin1-2/+5
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: Don't disable polling in fallback modeTakashi Iwai1-3/+4
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Reviewed-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: register backlight on pascal and newerBen Skeggs1-0/+3
Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11i2c: tegra: Fix Maximum transfer sizeSowjanya Komatineni1-1/+14
Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2019-01-11i2c: dev: prevent adapter retries and timeout being set as minus valueYi Zeng1-0/+6
If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng <[email protected]> [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2019-01-10qcom-scm: Include <linux/err.h> headerFabio Estevam1-0/+1
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") the DRM_MSM symbol can be selected by SOC_IMX5 causing the following error when building imx_v6_v7_defconfig: In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0: ../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr': ../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function) return -ENODEV; Include the <linux/err.h> header file to fix this problem. Reported-by: kernelci.org bot <[email protected]> Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Andy Gross <[email protected]>
2019-01-10Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linusJens Axboe6-39/+72
Pull NVMe fixes from Christoph. * 'nvme-5.0' of git://git.infradead.org/nvme: nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps
2019-01-10Merge tag 'pci-v5.0-fixes-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix Amlogic Meson host controller driver build failure (Corentin Labbe)" * tag 'pci-v5.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: amlogic: Fix build failure due to missing gpio header
2019-01-11Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie15-96/+156
into drm-fixes - Powerplay fixes - Virtual display pinning fixes - Golden register updates for vega - Pitch and gem size validation fixes - Fix for error case in sr-iov init - Disable page tables in system memory on RV due to issues with IOMMU reported on some platforms Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.