| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
eeprom: at25: Split reads into chunks and cap write size
misc: atmel-ssc: Fix IRQ check in ssc_probe
char: lp: remove redundant initialization of err
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.19-rc3 that resolve
reported issues:
- remove visorbus.h which was forgotten in the -rc1 merge where the
code that used it was removed
- olpc_dcon: mark as broken to allow the DRM developers to evolve the
fbdev api properly without having to deal with this obsolete
driver. It will be removed soon if no one steps up to adopt it and
fix the issues with it.
- rtl8723bs driver fix
- r8188eu driver fix to resolve many reports of the driver being
broken with -rc1.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: Also remove the Unisys visorbus.h
staging: rtl8723bs: Allocate full pwep structure
staging: olpc_dcon: mark driver as broken
staging: r8188eu: Fix warning of array overflow in ioctl_linux.c
staging: r8188eu: fix rtw_alloc_hwxmits error detection for now
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.19-rc3 to
resolve some reported problems:
- 8250 lsr read bugfix
- n_gsm line discipline allocation fix
- qcom serial driver fix for reported lockups that happened in -rc1
- goldfish tty driver fix
All have been in linux-next for a while now with no reported issues"
* tag 'tty-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Store to lsr_save_flags after lsr read
tty: goldfish: Fix free_irq() on remove
tty: serial: qcom-geni-serial: Implement start_rx callback
serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.
tty: n_gsm: Debug output allocation must use GFP_ATOMIC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc3
They include:
- new usb-serial driver device ids
- usb gadget driver fixes for reported problems
- cdnsp driver fix
- dwc3 driver fixes for reported problems
- dwc3 driver fix for merge problem that I caused in 5.18
- xhci driver fixes
- dwc2 memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_fs: change ep->ep safe in ffs_epfile_io()
usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()
xhci: Fix null pointer dereference in resume if xhci has only one roothub
USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
usb: cdnsp: Fixed setting last_trb incorrectly
usb: gadget: u_ether: fix regression in setting fixed MAC address
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
usb: dwc2: Fix memory leak in dwc2_hcd_init
usb: dwc3: pci: Restore line lost in merge conflict resolution
usb: dwc3: gadget: Fix IN endpoint max packet size allocation
USB: serial: option: add support for Cinterion MV31 with new baseline
USB: serial: io_ti: add Agilent E5805A support
|
|
Fixes speaker output and headset detection on Clevo PD70PNT.
Signed-off-by: Tim Crawford <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
|
|
Notes are better expressed with reST admonitions.
Fixes: f23b22599f8e ("Documentation/zh_CN: Add basic LoongArch documentations")
Reviewed-by: WANG Xuerui <[email protected]>
Signed-off-by: Yanteng Si <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Notes are better expressed with reST admonitions.
Fixes: 0ea8ce61cb2c ("Documentation: LoongArch: Add basic documentations")
Reviewed-by: WANG Xuerui <[email protected]>
Signed-off-by: Yanteng Si <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Commit c604abc3f6e ("vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG")
splits ELF_DETAILS from STABS_DEBUG, resulting in missing ELF_DETAILS
information in LoongArch architecture, so add it.
Fixes: c604abc3f6e ("vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG")
Signed-off-by: Youling Tang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Freeze the queue earlier in del_gendisk so that the state does not
change while we remove debugfs and sysfs files.
Ming mentioned that being able to observer request in debugfs might
be useful while the queue is being frozen in del_gendisk, which is
made possible by this change.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The block debugfs files are created in blk_register_queue, which is
called by add_disk and use a naming scheme based on the disk_name.
After del_gendisk returns that name can be reused and thus we must not
leave these debugfs files around, otherwise the kernel is unhappy
and spews messages like:
Directory XXXXX with parent 'block' already present!
and the newly created devices will not have working debugfs files.
Move the unregistration to blk_unregister_queue instead (which matches
the sysfs unregistration) to make sure the debugfs life time rules match
those of the disk name.
As part of the move also make sure the whole debugfs unregistration is
inside a single debugfs_mutex critical section.
Note that this breaks blktests block/002, which checks that the debugfs
directory has not been removed while blktests is running, but that
particular check should simply be removed from the test case.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Various places like I/O schedulers or the QOS infrastructure try to
register debugfs files on demans, which can race with creating and
removing the main queue debugfs directory. Use the existing
debugfs_mutex to serialize all debugfs operations that rely on
q->debugfs_dir or the directories hanging off it.
To make the teardown code a little simpler declare all debugfs dentry
pointers and not just the main one uncoditionally in blkdev.h.
Move debugfs_mutex next to the dentries that it protects and document
what it is used for.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The elevator is only used for file system requests, which are stopped in
del_gendisk. Move disabling the elevator and freeing the scheduler tags
to the end of del_gendisk instead of doing that work in disk_release and
blk_cleanup_queue to avoid a use after free on q->tag_set from
disk_release as the tag_set might not be alive at that point.
Move the blk_qos_exit call as well, as it just depends on the elevator
exit and would be the only reason to keep the not exactly cheap queue
freeze in disk_release.
Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support")
Reported-by: [email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
After commit a35707c3d850 ("riscv: add memory-type errata for T-Head"),
builds with LLVM's integrated assembler fail like:
In file included from arch/riscv/kernel/asm-offsets.c:10:
In file included from ./include/linux/mm.h:29:
In file included from ./include/linux/pgtable.h:6:
In file included from ./arch/riscv/include/asm/pgtable.h:114:
./arch/riscv/include/asm/pgtable-64.h:210:2: error: invalid input constraint '0' in asm
ALT_THEAD_PMA(prot_val);
^
./arch/riscv/include/asm/errata_list.h:88:4: note: expanded from macro 'ALT_THEAD_PMA'
: "0"(_val), \
^
This was reported upstream to LLVM where Jessica pointed out a couple of
issues with the existing implementation of ALT_THEAD_PMA:
* t3 is modified but not listed in the clobbers list.
* "+r"(_val) marks _val as both an input and output of the asm but then
"0"(_val) marks _val as an input matching constraint, which does not
make much sense in this situation, as %1 is not actually used in the
asm and matching constraints are designed to be used for different
inputs that need to use the same register.
Drop the matching contraint and shift all the operands by one, as %1 is
unused, and mark t3 as clobbered. This resolves the build error and goes
not cause any problems with GNU as.
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Link: https://github.com/ClangBuiltLinux/linux/issues/1641
Link: https://github.com/llvm/llvm-project/issues/55514
Link: https://gcc.gnu.org/onlinedocs/gcc/Simple-Constraints.html
Suggested-by: Jessica Clarke <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
io_arm_poll_handler() will recycle the buffer appropriately if we end
up arming poll (or if we're ready to retry), but not for the io-wq case
if we have attempted poll first.
Explicitly recycle the buffer to avoid both hanging on to it too long,
but also to avoid multiple reads grabbing the same one. This can happen
for ring mapped buffers, since it hasn't necessarily been committed.
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Link: https://github.com/axboe/liburing/issues/605
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses")
introduced a helper function to fold duplicated validity checks of bind
addresses into inet_addr_valid_or_nonlocal(). However, this caused an
unintended regression in ping_check_bind_addr(), which previously would
reject binding to multicast and broadcast addresses, but now these are
both incorrectly allowed as reported in [1].
This patch restores the original check. A simple reordering is done to
improve readability and make it evident that multicast and broadcast
addresses should not be allowed. Also, add an early exit for INADDR_ANY
which replaces lost behavior added by commit 0ce779a9f501 ("net: Avoid
unnecessary inet_addr_type() call when addr is INADDR_ANY").
Furthermore, this patch introduces regression selftests to catch these
specific cases.
[1] https://lore.kernel.org/netdev/CANP3RGdkAcDyAZoT1h8Gtuu0saq+eOrrTiWbxnOs+5zn+cpyKg@mail.gmail.com/
Fixes: 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses")
Cc: Miaohe Lin <[email protected]>
Reported-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Carlos Llamas <[email protected]>
Signed-off-by: Riccardo Paolo Bestetti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command().
This should be caused by the subtracting from sp->rx_count_cooked before.
It seems that sp->rx_count_cooked value is changed to 0, which bypassed the
previous judgment.
The situation is shown below:
(Thread 1) | (Thread 2)
decode_std_command() | resync_tnc()
... |
if (rest == 2) |
sp->rx_count_cooked -= 2; |
else if (rest == 3) | ...
| sp->rx_count_cooked = 0;
sp->rx_count_cooked -= 1; |
for (i = 0; i < sp->rx_count_cooked; i++) // report error
checksum += sp->cooked_buf[i];
sp->rx_count_cooked is a shared variable but is not protected by a lock.
The same applies to sp->rx_count. This patch adds a lock to fix the bug.
The fail log is shown below:
=======================================================================
UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31
index 400 is out of range for type 'unsigned char [400]'
CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
ubsan_epilogue+0xb/0x50
__ubsan_handle_out_of_bounds.cold+0x62/0x6c
sixpack_receive_buf+0xfda/0x1330
tty_ldisc_receive_buf+0x13e/0x180
tty_port_default_receive_buf+0x6d/0xa0
flush_to_ldisc+0x213/0x3f0
process_one_work+0x98f/0x1620
worker_thread+0x665/0x1080
kthread+0x2e9/0x3a0
ret_from_fork+0x1f/0x30
...
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Xu Jia <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
syzbot found the following issue on:
==================================================================
BUG: KASAN: use-after-free in tipc_named_reinit+0x94f/0x9b0
net/tipc/name_distr.c:413
Read of size 8 at addr ffff88805299a000 by task kworker/1:9/23764
CPU: 1 PID: 23764 Comm: kworker/1:9 Not tainted
5.18.0-rc4-syzkaller-00878-g17d49e6e8012 #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x495
mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413
tipc_net_finalize+0x234/0x3d0 net/tipc/net.c:138
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
</TASK>
[...]
==================================================================
In the commit
d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work"),
the cancel_work_sync() function just to make sure ONLY the work
tipc_net_finalize_work() is executing/pending on any CPU completed before
tipc namespace is destroyed through tipc_exit_net(). But this function
is not guaranteed the work is the last queued. So, the destroyed instance
may be accessed in the work which will try to enqueue later.
In order to completely fix, we re-order the calling of cancel_work_sync()
to make sure the work tipc_net_finalize_work() was last queued and it
must be completed by calling cancel_work_sync().
Reported-by: [email protected]
Fixes: d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work")
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Ying Xue <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit 21a75f0915dd ("bonding: Fix ARP monitor validation"),
the bonding ARP / ND link monitors depend on the trans_start time to
determine link availability. NETIF_F_LLTX drivers must update trans_start
directly, which veth does not do. This prevents use of the ARP or ND link
monitors with veth interfaces in a bond.
Resolve this by having veth_xmit update the trans_start time.
Reported-by: Jonathan Toppins <[email protected]>
Tested-by: Jonathan Toppins <[email protected]>
Signed-off-by: Jay Vosburgh <[email protected]>
Fixes: 21a75f0915dd ("bonding: Fix ARP monitor validation")
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_isalive() is called under RTNL or dev_base_lock protection.
This means that changes to dev->reg_state should be done with both locks held.
syzbot reported:
BUG: KCSAN: data-race in register_netdevice / type_show
write to 0xffff888144ecf518 of 1 bytes by task 20886 on cpu 0:
register_netdevice+0xb9f/0xdf0 net/core/dev.c:10050
lapbeth_new_device drivers/net/wan/lapbether.c:414 [inline]
lapbeth_device_event+0x4a0/0x6c0 drivers/net/wan/lapbether.c:456
notifier_call_chain kernel/notifier.c:87 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:455
__dev_notify_flags+0x1d6/0x3a0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8607
do_setlink+0x778/0x2230 net/core/rtnetlink.c:2780
__rtnl_newlink net/core/rtnetlink.c:3546 [inline]
rtnl_newlink+0x114c/0x16a0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x811/0x8c0 net/core/rtnetlink.c:6089
netlink_rcv_skb+0x13e/0x240 net/netlink/af_netlink.c:2501
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6107
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x58a/0x660 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x661/0x750 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2119
__do_sys_sendto net/socket.c:2131 [inline]
__se_sys_sendto net/socket.c:2127 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2127
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
read to 0xffff888144ecf518 of 1 bytes by task 20423 on cpu 1:
dev_isalive net/core/net-sysfs.c:38 [inline]
netdev_show net/core/net-sysfs.c:50 [inline]
type_show+0x24/0x90 net/core/net-sysfs.c:112
dev_attr_show+0x35/0x90 drivers/base/core.c:2095
sysfs_kf_seq_show+0x175/0x240 fs/sysfs/file.c:59
kernfs_seq_show+0x75/0x80 fs/kernfs/file.c:162
seq_read_iter+0x2c3/0x8e0 fs/seq_file.c:230
kernfs_fop_read_iter+0xd1/0x2f0 fs/kernfs/file.c:235
call_read_iter include/linux/fs.h:2052 [inline]
new_sync_read fs/read_write.c:401 [inline]
vfs_read+0x5a5/0x6a0 fs/read_write.c:482
ksys_read+0xe8/0x1a0 fs/read_write.c:620
__do_sys_read fs/read_write.c:630 [inline]
__se_sys_read fs/read_write.c:628 [inline]
__x64_sys_read+0x3e/0x50 fs/read_write.c:628
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 20423 Comm: udevd Tainted: G W 5.19.0-rc2-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Oliver Upton has agreed to help with reviewing the KVM/arm64
patches, and has been doing so for a while now, so adding him
as to the reviewer list.
Note that Oliver is using a different email address for this
purpose, rather than the one his been using for his other
contributions.
Signed-off-by: Marc Zyngier <[email protected]>
Acked-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit a7259df76702 ("memblock: make memblock_find_in_range method
private") changed the API using which memory is reserved for the pKVM
hypervisor. However, memblock_phys_alloc() differs from the original API in
terms of kmemleak semantics -- the old one didn't report the reserved
regions to kmemleak while the new one does. Unfortunately, when protected
KVM is enabled, all kernel accesses to pKVM-private memory result in a
fatal exception, which can now happen because of kmemleak scans:
$ echo scan > /sys/kernel/debug/kmemleak
[ 34.991354] kvm [304]: nVHE hyp BUG at: [<ffff800008fa3750>] __kvm_nvhe_handle_host_mem_abort+0x270/0x290!
[ 34.991580] kvm [304]: Hyp Offset: 0xfffe8be807e00000
[ 34.991813] Kernel panic - not syncing: HYP panic:
[ 34.991813] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[ 34.991813] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[ 34.991813] VCPU:0000000000000000
[ 34.993660] CPU: 0 PID: 304 Comm: bash Not tainted 5.19.0-rc2 #102
[ 34.994059] Hardware name: linux,dummy-virt (DT)
[ 34.994452] Call trace:
[ 34.994641] dump_backtrace.part.0+0xcc/0xe0
[ 34.994932] show_stack+0x18/0x6c
[ 34.995094] dump_stack_lvl+0x68/0x84
[ 34.995276] dump_stack+0x18/0x34
[ 34.995484] panic+0x16c/0x354
[ 34.995673] __hyp_pgtable_total_pages+0x0/0x60
[ 34.995933] scan_block+0x74/0x12c
[ 34.996129] scan_gray_list+0xd8/0x19c
[ 34.996332] kmemleak_scan+0x2c8/0x580
[ 34.996535] kmemleak_write+0x340/0x4a0
[ 34.996744] full_proxy_write+0x60/0xbc
[ 34.996967] vfs_write+0xc4/0x2b0
[ 34.997136] ksys_write+0x68/0xf4
[ 34.997311] __arm64_sys_write+0x20/0x2c
[ 34.997532] invoke_syscall+0x48/0x114
[ 34.997779] el0_svc_common.constprop.0+0x44/0xec
[ 34.998029] do_el0_svc+0x2c/0xc0
[ 34.998205] el0_svc+0x2c/0x84
[ 34.998421] el0t_64_sync_handler+0xf4/0x100
[ 34.998653] el0t_64_sync+0x18c/0x190
[ 34.999252] SMP: stopping secondary CPUs
[ 35.000034] Kernel Offset: disabled
[ 35.000261] CPU features: 0x800,00007831,00001086
[ 35.000642] Memory Limit: none
[ 35.001329] ---[ end Kernel panic - not syncing: HYP panic:
[ 35.001329] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[ 35.001329] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[ 35.001329] VCPU:0000000000000000 ]---
Fix this by explicitly excluding the hypervisor's memory pool from
kmemleak like we already do for the hyp BSS.
Cc: Mike Rapoport <[email protected]>
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Quentin Perret <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The current code does not check for errors and does not release the
reference on errors.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The existing code uses pm_runtime_get_sync/put_autosuspend, but
pm_runtime was not explicitly enabled. The autosuspend delay was not
set either, the value is set to 5s since HDMI is rather painful to
resume.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The UpExtreme BIOS reports microphones that are not physically
present, so this module ends-up selecting SOF, while the UpExtreme11
BIOS does not report microphones so the snd-hda-intel driver is
selected.
For consistency use SOF unconditionally in autodetection mode. The use
of the snd-hda-intel driver can still be enabled with
'options snd-intel-dspcfg dsp_driver=1'
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix the following coccicheck warning:
./drivers/firewire/core-device.c:375:8-16: WARNING: use scnprintf or
sprintf.
Reported-by: Abaci Robot<[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Recent change brings potential leak of value on kernel stack to userspace
due to uninitialized value.
This commit fixes the bug.
Reported-by: Dan Carpenter <[email protected]>
Fixes: baa914cd81f5 ("firewire: add kernel API to access CYCLE_TIME register")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add flags value to check the result of ata completion
Fixes: 255c03d15a29 ("libata: Add tracepoints")
Cc: [email protected]
Signed-off-by: Edward Wu <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Regular drm fixes for rc3. Nothing too serious, i915, amdgpu and
exynos all have a few small driver fixes, and two ttm fixes, and one
compiler warning.
atomic:
- fix spurious compiler warning
ttm:
- add NULL ptr check in swapout code
- fix bulk move handling
i915:
- Fix page fault on error state read
- Fix memory leaks in per-gt sysfs
- Fix multiple fence handling
- Remove accidental static from a local variable
amdgpu:
- Fix regression in GTT size reporting
- OLED backlight fix
exynos:
- Check a null pointer instead of IS_ERR()
- Rework initialization code of Exynos MIC driver"
* tag 'drm-fixes-2022-06-17' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Cap OLED brightness per max frame-average luminance
drm/amdgpu: Fix GTT size reporting in amdgpu_ioctl
drm/exynos: mic: Rework initialization
drm/exynos: fix IS_ERR() vs NULL check in probe
drm/ttm: fix bulk move handling v2
drm/i915/uc: remove accidental static from a local variable
drm/i915: Individualize fences before adding to dma_resv obj
drm/i915/gt: Fix memory leaks in per-gt sysfs
drm/i915/reset: Fix error_state_read ptr + offset use
drm/ttm: fix missing NULL check in ttm_device_swapout
drm/atomic: fix warning of unused variable
|
|
Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.
Cc: Ondrej Spacek <[email protected]>
Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Jiri Olsa says:
====================
hi,
there's bug in kprobe_multi link that makes cookies misplaced when
using symbols to attach. The reason is that we sort symbols by name
but not adjacent cookie values. Current test did not find it because
bpf_fentry_test* are already sorted by name.
v3 changes:
- fixed kprobe_multi bench test to filter out invalid entries
from available_filter_functions
v2 changes:
- rebased on top of bpf/master
- checking if cookies are defined later in swap function [Andrii]
- added acks
thanks,
jirka
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
With [1] the available_filter_functions file contains records
starting with __ftrace_invalid_address___ and marking disabled
entries.
We need to filter them out for the bench test to pass only
resolvable symbols to kernel.
[1] commit b39181f7c690 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Fixes: b39181f7c690 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When user specifies symbols and cookies for kprobe_multi link
interface it's very likely the cookies will be misplaced and
returned to wrong functions (via get_attach_cookie helper).
The reason is that to resolve the provided functions we sort
them before passing them to ftrace_lookup_symbols, but we do
not do the same sort on the cookie values.
Fixing this by using sort_r function with custom swap callback
that swaps cookie values as well.
Fixes: 0236fec57a15 ("bpf: Resolve symbols with ftrace_lookup_symbols for kprobe multi link")
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We want to store the resolved address on the same index as
the symbol string, because that's the user (bpf kprobe link)
code assumption.
Also making sure we don't store duplicates that might be
present in kallsyms.
Acked-by: Song Liu <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Fixes: bed0d9a50dac ("ftrace: Add ftrace_lookup_symbols function")
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
There's a kernel bug that causes cookies to be misplaced and
the reason we did not catch this with this test is that we
provide bpf_fentry_test* functions already sorted by name.
Shuffling function bpf_fentry_test2 deeper in the list and
keeping the current cookie values as before will trigger
the bug.
The kernel fix is coming in following changes.
Acked-by: Song Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add entry to map [email protected] to the unique identity of
Christian Marangi.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Christian Marangi <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Currently unpoison_memory(unsigned long pfn) is designed for soft
poison(hwpoison-inject) only. Since 17fae1294ad9d, the KPTE gets cleared
on a x86 platform once hardware memory corrupts.
Unpoisoning a hardware corrupted page puts page back buddy only, the
kernel has a chance to access the page with *NOT PRESENT* KPTE. This
leads BUG during accessing on the corrupted KPTE.
Suggested by David&Naoya, disable unpoison mechanism when a real HW error
happens to avoid BUG like this:
Unpoison: Software-unpoisoned page 0x61234
BUG: unable to handle page fault for address: ffff888061234000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 2c01067 P4D 2c01067 PUD 107267063 PMD 10382b063 PTE 800fffff9edcb062
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 26551 Comm: stress Kdump: loaded Tainted: G M OE 5.18.0.bm.1-amd64 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...
RIP: 0010:clear_page_erms+0x7/0x10
Code: ...
RSP: 0000:ffffc90001107bc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000901 RCX: 0000000000001000
RDX: ffffea0001848d00 RSI: ffffea0001848d40 RDI: ffff888061234000
RBP: ffffea0001848d00 R08: 0000000000000901 R09: 0000000000001276
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000140dca R15: 0000000000000001
FS: 00007fd8b2333740(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888061234000 CR3: 00000001023d2005 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
prep_new_page+0x151/0x170
get_page_from_freelist+0xca0/0xe20
? sysvec_apic_timer_interrupt+0xab/0xc0
? asm_sysvec_apic_timer_interrupt+0x1b/0x20
__alloc_pages+0x17e/0x340
__folio_alloc+0x17/0x40
vma_alloc_folio+0x84/0x280
__handle_mm_fault+0x8d4/0xeb0
handle_mm_fault+0xd5/0x2a0
do_user_addr_fault+0x1d0/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
exc_page_fault+0x78/0x170
asm_exc_page_fault+0x27/0x30
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 847ce401df392 ("HWPOISON: Add unpoisoning support")
Fixes: 17fae1294ad9d ("x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned")
Signed-off-by: zhenwei pi <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Miaohe Lin <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]> [5.8+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
hugetlbfs fallocate support was originally added with commit 70c3547e36f5
("hugetlbfs: add hugetlbfs_fallocate()"). Initial support only operated
on whole hugetlb pages. This makes sense for populating files as other
interfaces such as mmap and truncate require hugetlb page size alignment.
Only operating on whole hugetlb pages for the hole punch case was a
simplification and there was no compelling use case to zero partial pages.
In a recent discussion[1] it was assumed that hugetlbfs hole punch would
zero partial hugetlb pages as that is in line with the man page
description saying 'partial filesystem blocks are zeroed'. However, the
hugetlbfs hole punch code actually does this:
hole_start = round_up(offset, hpage_size);
hole_end = round_down(offset + len, hpage_size);
Modify code to zero partial hugetlb pages in hole punch range. It is
possible that application code could note a change in behavior. However,
that would imply the code is passing in an unaligned range and expecting
only whole pages be removed. This is unlikely as the fallocate
documentation states the opposite.
The current hugetlbfs fallocate hole punch behavior is tested with the
libhugetlbfs test fallocate_align[2]. This test will be updated to
validate partial page zeroing.
[1] https://lore.kernel.org/linux-mm/[email protected]/
[2] https://github.com/libhugetlbfs/libhugetlbfs/blob/master/tests/fallocate_align.c
Link: https://lkml.kernel.org/r/YqeiMlZDKI1Kabfe@monkey
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There is no slabinfo.py in tools/cgroup, but has memcg_slabinfo.py instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yang Yang <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The commit referenced below subtly and inadvertently changed the logic to
disallow pinning of zero pfns. This breaks device assignment with vfio
and potentially various other users of gup. Exclude the zero page test
from the negation.
Link: https://lkml.kernel.org/r/165490039431.944052.12458624139225785964.stgit@omen
Fixes: 1c563432588d ("mm: fix is_pinnable_page against a cma page")
Signed-off-by: Alex Williamson <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Reported-by: Yishai Hadas <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: John Dias <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Zhangfei Gao <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Joao Martins <[email protected]>
Cc: Yi Liu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The RNG uses vanilla spinlocks, not raw spinlocks, so kfence should pick
its random numbers before taking its raw spinlocks. This also has the
nice effect of doing less work inside the lock. It should fix a splat
that Geert saw with CONFIG_PROVE_RAW_LOCK_NESTING:
dump_backtrace.part.0+0x98/0xc0
show_stack+0x14/0x28
dump_stack_lvl+0xac/0xec
dump_stack+0x14/0x2c
__lock_acquire+0x388/0x10a0
lock_acquire+0x190/0x2c0
_raw_spin_lock_irqsave+0x6c/0x94
crng_make_state+0x148/0x1e4
_get_random_bytes.part.0+0x4c/0xe8
get_random_u32+0x4c/0x140
__kfence_alloc+0x460/0x5c4
kmem_cache_alloc_trace+0x194/0x1dc
__kthread_create_on_node+0x5c/0x1a8
kthread_create_on_node+0x58/0x7c
printk_start_kthread.part.0+0x34/0xa8
printk_activate_kthreads+0x4c/0x54
do_one_initcall+0xec/0x278
kernel_init_freeable+0x11c/0x214
kernel_init+0x24/0x124
ret_from_fork+0x10/0x20
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d4150779e60f ("random32: use real rng for non-deterministic randomness")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reported-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now there is a dedicated maillist ([email protected]) for
LoongArch, add it for better collaboration.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Huacai Chen <[email protected]>
Reviewed-by: WANG Xuerui <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Xuefeng Li <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Xuerui Wang <[email protected]>
Cc: Jiaxun Yang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Describe the new kernel.org location of the MM trees.
Suggested-by: David Hildenbrand <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Use Abel Vesa's kernel.org account in maintainer entry and mailmap.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Dong Aisheng <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There are certainly a lot more files that partially fall into the memory
hot(un)plug category, including parts of mm/sparse.c, mm/page_isolation.c
and mm/page_alloc.c. Let's only add what's almost completely memory
hot(un)plug related.
Add myself as reviewer so it's easier for contributors to figure out
whom to CC.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/YqlaE/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Muchun Song <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
I have been focusing on mm for the past two years. e.g. fixing bugs,
cleaning up the code and reviewing. I would like to help maintainers and
people working on memory-failure by reviewing their work.
Let me be Cc'd on patches related to memory-failure.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add alias for patches that I contribute on behalf of Profian
(my current employer).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
initialized
Commit 059342d1dd4e ("mm/damon/reclaim: fix the timer always stays
active") made DAMON_RECLAIM's 'enabled' parameter store callback,
'enabled_store()', to schedule 'damon_reclaim_timer'. The scheduling uses
'system_wq', which is initialized in 'workqueue_init_early()'. As kernel
parameters parsing function ('parse_args()') is called before
'workqueue_init_early()', 'enabled_store()' can be executed before
'workqueue_init_early()' and end up accessing the uninitialized
'system_wq'. As a result, the booting hang[1]. This commit fixes the
issue by checking if the initialization is done before scheduling the
timer.
[1] https://lkml.kernel.org/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 059342d1dd4e ("mm/damon/reclaim: fix the timer always stays active")
Signed-off-by: SeongJae Park <[email protected]>
Reported-by: Greg White <[email protected]>
Cc: Hailong Tu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
any fatal signal
The comments in kernel/kthread.c create a feeling that only SIGKILL is
able to terminate the creation of kernel kthreads by
kthread_create()/_on_node()/_on_cpu() APIs.
In reality, wait_for_completion_killable() might be killed by any fatal
signal that does not have a custom handler:
(!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
(t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
static inline void signal_wake_up(struct task_struct *t, bool resume)
{
signal_wake_up_state(t, resume ? TASK_WAKEKILL : 0);
}
static void complete_signal(int sig, struct task_struct *p, enum pid_type type)
{
[...]
/*
* Found a killable thread. If the signal will be fatal,
* then start taking the whole group down immediately.
*/
if (sig_fatal(p, sig) ...) {
if (!sig_kernel_coredump(sig)) {
[...]
do {
task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
} while_each_thread(p, t);
return;
}
}
}
Update the comments in kernel/kthread.c to make this more obvious.
The motivation for this change was debugging why a module initialization
failed. The module was being loaded from initrd. It "magically" failed
when systemd was switching to the real root. The clean up operations sent
SIGTERM to various pending processed that were started from initrd.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
Reviewed-by: "Eric W. Biederman" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|