aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-19ALSA: hda - Enforces runtime_resume after S3 and S4 for each codecHui Wang1-3/+17
Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d4d06 ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-03-19ALSA: hda - Don't trigger jackpoll_work in azx_resumeHui Wang1-4/+4
The commit 3baffc4a84d7 (ALSA: hda/intel: Refactoring PM code) changed the behaviour of azx_resume(), it triggers the jackpoll_work after applying this commit. This change introduced a new issue, all codecs are runtime active after S3, and will not call runtime_suspend() automatically. The root cause is the jackpoll_work calls snd_hda_power_up/down_pm, and it calls up_pm before snd_hdac_enter_pm is called, while calls the down_pm in the middle of enter_pm and leave_pm is called. This makes the dev->power.usage_count unbalanced after S3. To fix it, let azx_resume() don't trigger jackpoll_work as before it did. Fixes: 3baffc4a84d7 ("ALSA: hda/intel: Refactoring PM code") Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-03-18drm/i915: Sanity check mmap length against object sizeChris Wilson1-6/+9
We assumed that vm_mmap() would reject an attempt to mmap past the end of the filp (our object), but we were wrong. Applications that tried to use the mmap beyond the end of the object would be greeted by a SIGBUS. After this patch, those applications will be told about the error on creating the mmap, rather than at a random moment on later access. Reported-by: Antonio Argenziano <[email protected]> Testcase: igt/gem_mmap/bad-size Signed-off-by: Chris Wilson <[email protected]> Cc: Antonio Argenziano <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: [email protected] Reviewed-by: Tvrtko Ursulin <[email protected]> Reviewed-by: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 794a11cb67201ad1bb61af510bb8460280feb3f3) Signed-off-by: Rodrigo Vivi <[email protected]>
2019-03-18drm/i915: Fix off-by-one in reporting hanging processChris Wilson1-1/+1
ffs() is 1-indexed, but we want to use it as an index into an array, so use __ffs() instead. Fixes: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 9073e5b26743b8b675cc44a9c0c8f8c3d584e1c0) Signed-off-by: Rodrigo Vivi <[email protected]>
2019-03-18drm/i915/bios: assume eDP is present on port A when there is no VBTThomas Preston1-0/+1
We rely on VBT DDI port info for eDP detection on GEN9 platforms and above. This breaks GEN9 platforms which don't have VBT because port A eDP now defaults to false. Fix this by defaulting to true when VBT is missing. Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection") Signed-off-by: Thomas Preston <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2131bc0ced6088648e47f126566c3da58b07e4ef) Signed-off-by: Rodrigo Vivi <[email protected]>
2019-03-18scsi: iscsi: flush running unbind operations when removing a sessionMaurizio Lombardi1-0/+2
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by: Maurizio Lombardi <[email protected]> Acked-by: Chris Leech <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2019-03-18rbd: set io_min, io_opt and discard_granularity to alloc_sizeIlya Dryomov1-4/+4
Now that we have alloc_size that controls our discard behavior, it doesn't make sense to have these set to object (set) size. alloc_size defaults to 64k, but because discard_granularity is likely 4M, only ranges that are equal to or bigger than 4M can be considered during fstrim. A smaller io_min is also more likely to be met, resulting in fewer deferred writes on bluestore OSDs. Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
2019-03-18platform/chrome: Fix locking pattern in wilco_ec_mailbox()Nick Crews1-1/+1
Before, ec->data_buffer could be written to from multiple contexts at the same time. Since the ec is shared data, it needs to be inside the mutex as well. Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC") Signed-off-by: Nick Crews <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Benson Leung <[email protected]>
2019-03-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds7-45/+89
Pull rdma fixes from Jason Gunthorpe: "Several driver bug fixes post in the last three weeks - first part of a race condition fix in mlx4 with CATAS errors - bad interaction with FW causing resource leaks in the mlx5 DCT flow - bad reporting of link speed/width in new mlx5 devices - user triggable OOPS in i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Avoid panic when handling the inetdev event IB/mlx5: Fix mapping of link-mode to IB width and speed IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT net/mlx5: Fix DCT creation bad flow IB/mlx4: Fix race condition between catas error reset and aliasguid flows
2019-03-18block: add BIO_NO_PAGE_REF flagJens Axboe4-29/+39
If bio_iov_iter_get_pages() is called on an iov_iter that is flagged with NO_REF, then we don't need to add a page reference for the pages that we add. Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows not to drop a reference to these pages. Signed-off-by: Jens Axboe <[email protected]>
2019-03-18iov_iter: add ITER_BVEC_FLAG_NO_REF flagJens Axboe2-5/+22
For ITER_BVEC, if we're holding on to kernel pages, the caller doesn't need to grab a reference to the bvec pages, and drop that same reference on IO completion. This is essentially safe for any ITER_BVEC, but some use cases end up reusing pages and uncondtionally dropping a page reference on completion. And example of that is sendfile(2), that ends up being a splice_in + splice_out on the pipe pages. Add a flag that tells us it's fine to not grab a page reference to the bvec pages, since that caller knows not to drop a reference when it's done with the pages. Signed-off-by: Jens Axboe <[email protected]>
2019-03-18io_uring: mark me as the maintainerJens Axboe1-0/+10
And io_uring as maintained in general. Signed-off-by: Jens Axboe <[email protected]>
2019-03-18io_uring: retry bulk slab allocs as single allocsJens Axboe1-5/+14
I've seen cases where bulk alloc fails, since the bulk alloc API is all-or-nothing - either we get the number we ask for, or it returns 0 as number of entries. If we fail a batch bulk alloc, retry a "normal" kmem_cache_alloc() and just use that instead of failing with -EAGAIN. While in there, ensure we use GFP_KERNEL. That was an oversight in the original code, when we switched away from GFP_ATOMIC. Signed-off-by: Jens Axboe <[email protected]>
2019-03-18selinux: fix NULL dereference in policydb_destroy()Ondrej Mosnacek1-4/+9
The conversion to kvmalloc() forgot to account for the possibility that p->type_attr_map_array might be null in policydb_destroy(). Fix this by destroying its contents only if it is not NULL. Also make sure ebitmap_init() is called on all entries before policydb_destroy() can be called. Right now this is a no-op, because both kvcalloc() and ebitmap_init() just zero out the whole struct, but let's rather not rely on a specific implementation. Reported-by: [email protected] Fixes: acdf52d97f82 ("selinux: convert to kvmalloc") Signed-off-by: Ondrej Mosnacek <[email protected]> Acked-by: Stephen Smalley <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2019-03-18udf: Propagate errors from udf_truncate_extents()Jan Kara3-5/+8
Make udf_truncate_extents() properly propagate errors to its callers and let udf_setsize() handle the error properly as well. This lets userspace know in case there's some error when truncating blocks. Signed-off-by: Jan Kara <[email protected]>
2019-03-18udf: Fix crash on IO error during truncateJan Kara1-0/+3
When truncate(2) hits IO error when reading indirect extent block the code just bugs with: kernel BUG at linux-4.15.0/fs/udf/truncate.c:249! ... Fix the problem by bailing out cleanly in case of IO error. CC: [email protected] Reported-by: jean-luc malet <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2019-03-18Merge branches 'fixes' and 'thermal-intel' into nextZhang Rui2-5/+18
2019-03-18thermal/intel_powerclamp: fix truncated kthread nameZhang Rui1-1/+1
kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal: mtk: Allocate enough space for mtk_thermal.Pi-Hsun Shih1-2/+5
The mtk_thermal struct contains a 'struct mtk_thermal_bank banks[];', but the allocation only allocates sizeof(struct mtk_thermal) bytes, which cause out of bound access with the ->banks[] member. Change it to a fixed size array instead. Signed-off-by: Pi-Hsun Shih <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18loop: access lo_backing_file only when the loop device is Lo_boundDongli Zhang1-1/+1
Commit 758a58d0bc67 ("loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and "lo->lo_state = Lo_unbound" into different critical regions protected by loop_ctl_mutex. However, there is below race that the NULL lo->lo_backing_file would be accessed when the backend of a loop is another loop device, e.g., loop0's backend is a file, while loop1's backend is loop0. loop0's backend is file loop1's backend is loop0 __loop_clr_fd() mutex_lock(&loop_ctl_mutex); lo->lo_backing_file = NULL; --> set to NULL mutex_unlock(&loop_ctl_mutex); loop_set_fd() mutex_lock_killable(&loop_ctl_mutex); loop_validate_file() f = l->lo_backing_file; --> NULL access if loop0 is not Lo_unbound mutex_lock(&loop_ctl_mutex); lo->lo_state = Lo_unbound; mutex_unlock(&loop_ctl_mutex); lo->lo_backing_file should be accessed only when the loop device is Lo_bound. In fact, the problem has been introduced already in commit 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which loop_validate_file() could see devices in Lo_rundown state with which it did not count. It was harmless at that point but still. Fixes: 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") Reported-by: [email protected] Signed-off-by: Dongli Zhang <[email protected]> Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-03-18blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTARTYufen Yu1-2/+1
Let blk_mq_mark_tag_wait() use the blk_mq_sched_mark_restart_hctx() to set BLK_MQ_S_SCHED_RESTART. Signed-off-by: Yufen Yu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-03-18thermal/int340x_thermal: fix mode settingMatthew Garrett1-4/+3
int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by: Matthew Garrett <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal/int340x_thermal: Add additional UUIDsMatthew Garrett1-0/+14
Add more supported DPTF policies than the driver currently exposes. Signed-off-by: Matthew Garrett <[email protected]> Cc: Nisha Aram <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal: cpu_cooling: Remove unused cur_freq variableShaokun Zhang1-2/+1
The 'cur_freq' local variable became unused after commit 84fe2cab4859 ("cpu_cooling: Drop static-power related stuff"), let's remove it. Cc: Amit Daniel Kachhap <[email protected]> Cc: Viresh Kumar <[email protected]> Cc: Javi Merino <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Daniel Lezcano <[email protected]> Signed-off-by: Shaokun Zhang <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal: bcm2835: Fix crash in bcm2835_thermal_debugfsPhil Elwell1-5/+4
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal: samsung: Fix incorrect check after code mergeMarek Szyprowski1-1/+1
Merge commit 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce severity of too early temperature read"). Restore the original code from the mentioned commit to finally fix the warning message during boot: thermal thermal_zone0: failed to read out thermal zone (-22) Reported-by: Marian Mihailescu <[email protected]> Signed-off-by: Marek Szyprowski <[email protected]> Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18thermal/intel_powerclamp: fix __percpu declaration of worker_dataLuc Van Oostenryck1-1/+1
This variable is declared as: static struct powerclamp_worker_data * __percpu worker_data; In other words, a percpu pointer to struct ... But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data. So fix the declaration as: static struct powerclamp_worker_data __percpu *worker_data; This also quiets Sparse's warnings from __verify_pcpu_ptr(), like: 494:49: warning: incorrect type in initializer (different address spaces) 494:49: expected void const [noderef] <asn:3> *__vpp_verify 494:49: got struct powerclamp_worker_data * Signed-off-by: Luc Van Oostenryck <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Signed-off-by: Zhang Rui <[email protected]>
2019-03-18paride/pcd: cleanup queues when detection failsJens Axboe1-1/+5
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell. Also fix cleanup through regular module exit. Reported-by: Randy Dunlap <[email protected]> Tested-by: Randy Dunlap <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-03-18paride/pf: cleanup queues when detection failsJens Axboe1-5/+11
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell. Also fix cleanup through regular module exit. Reported-by: Randy Dunlap <[email protected]> Tested-by: Randy Dunlap <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-03-19powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32Christophe Leroy3-7/+10
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at startup. This patch move it from __setup_cpu_603() to start_here() and __secondary_start(), close to the initialisation of SPRN_THREAD. Previously, virt addr of PGDIR was retrieved from thread struct. Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR, hash_page() shall not convert it to phys anymore. This patch removes the conversion. Fixes: 93c4a162b014 ("powerpc/6xx: Store PGDIR physical address in a SPRG") Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-18ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declarationColin Ian King1-1/+1
The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition. This error predates the git history, so no idea when this error was introduced. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-03-18ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklistJaroslav Kysela1-2/+4
Another machine which does not like the power saving (noise): https://bugzilla.redhat.com/show_bug.cgi?id=1689623 Also, reorder the Lenovo C50 entry to keep the table sorted. Reported-by: [email protected] Signed-off-by: Jaroslav Kysela <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-03-18iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZEStanislaw Gruszka1-1/+6
Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: [email protected] Reported-and-tested-by: Jan Viktorin <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Stanislaw Gruszka <[email protected]> Fixes: 80187fd39dcb ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by: Joerg Roedel <[email protected]>
2019-03-18mmc: davinci: remove extraneous __init annotationArnd Bergmann1-1/+1
Building with clang finds a mistaken __init tag: WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references the function __init init_mmcsd_host(). This is often because davinci_mmcsd_probe lacks a __init annotation or the annotation of init_mmcsd_host is wrong. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Wolfram Sang <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-03-18mmc: pxamci: fix enum type confusionArnd Bergmann1-1/+1
clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b7140951 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Acked-by: Robert Jarzmik <[email protected]> Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-03-18powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038Michael Ellerman2-6/+6
Jakub Drnec reported: Setting the realtime clock can sometimes make the monotonic clock go back by over a hundred years. Decreasing the realtime clock across the y2k38 threshold is one reliable way to reproduce. Allegedly this can also happen just by running ntpd, I have not managed to reproduce that other than booting with rtc at >2038 and then running ntp. When this happens, anything with timers (e.g. openjdk) breaks rather badly. And included a test case (slightly edited for brevity): #define _POSIX_C_SOURCE 199309L #include <stdio.h> #include <time.h> #include <stdlib.h> #include <unistd.h> long get_time(void) { struct timespec tp; clock_gettime(CLOCK_MONOTONIC, &tp); return tp.tv_sec + tp.tv_nsec / 1000000000; } int main(void) { long last = get_time(); while(1) { long now = get_time(); if (now < last) { printf("clock went backwards by %ld seconds!\n", last - now); } last = now; sleep(1); } return 0; } Which when run concurrently with: # date -s 2040-1-1 # date -s 2037-1-1 Will detect the clock going backward. The root cause is that wtom_clock_sec in struct vdso_data is only a 32-bit signed value, even though we set its value to be equal to tk->wall_to_monotonic.tv_sec which is 64-bits. Because the monotonic clock starts at zero when the system boots the wall_to_montonic.tv_sec offset is negative for current and future dates. Currently on a freshly booted system the offset will be in the vicinity of negative 1.5 billion seconds. However if the wall clock is set past the Y2038 boundary, the offset from wall to monotonic becomes less than negative 2^31, and no longer fits in 32-bits. When that value is assigned to wtom_clock_sec it is truncated and becomes positive, causing the VDSO assembly code to calculate CLOCK_MONOTONIC incorrectly. That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which it is not meant to do. Worse, if the time is then set back before the Y2038 boundary CLOCK_MONOTONIC will jump backward. We can fix it simply by storing the full 64-bit offset in the vdso_data, and using that in the VDSO assembly code. We also shuffle some of the fields in vdso_data to avoid creating a hole. The original commit that added the CLOCK_MONOTONIC support to the VDSO did actually use a 64-bit value for wtom_clock_sec, see commit a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") (Nov 2005). However just 3 days later it was converted to 32-bits in commit 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)"), and the bug has existed since then AFAICS. Fixes: 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)") Cc: [email protected] # v2.6.15+ Link: http://lkml.kernel.org/r/[email protected] Reported-by: Jakub Drnec <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-17i40iw: Avoid panic when handling the inetdev eventFeng Tang1-1/+11
There is a panic reported that on a system with x722 ethernet, when doing the operations like: # ip link add br0 type bridge # ip link set eno1 master br0 # systemctl restart systemd-networkd The system will panic "BUG: unable to handle kernel null pointer dereference at 0000000000000034", with call chain: i40iw_inetaddr_event notifier_call_chain blocking_notifier_call_chain notifier_call_chain __inet_del_ifa inet_rtm_deladdr rtnetlink_rcv_msg netlink_rcv_skb rtnetlink_rcv netlink_unicast netlink_sendmsg sock_sendmsg __sys_sendto It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while the in->ifa_list is NULL. So add a check for the "in->ifa_list == NULL" case, and skip the ARP operation accordingly. Signed-off-by: Feng Tang <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-03-17IB/mlx5: Fix mapping of link-mode to IB width and speedAya Levin1-0/+7
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps. Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps. Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes") Signed-off-by: Aya Levin <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-03-17IB/mlx5: Use mlx5 core to create/destroy a DEVX DCTYishai Hadas4-13/+34
To prevent a hardware memory leak when a DEVX DCT object is destroyed without calling DRAIN DCT before, (e.g. under cleanup flow), need to manage its creation and destruction via mlx5 core. In that case the DRAIN DCT command will be called and only once that it will be completed the DESTROY DCT command will be called. Otherwise, the DESTROY DCT may fail and a hardware leak may occur. As of that change the DRAIN DCT command should not be exposed any more from DEVX, it's managed internally by the driver to work as expected by the device specification. Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: Yishai Hadas <[email protected]> Reviewed-by: Artemy Kovalyov <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-03-17net/mlx5: Fix DCT creation bad flowYishai Hadas1-30/+36
In case the DCT creation command has succeeded a DRAIN must be issued before calling DESTROY. In addition, the original code used the wrong parameter for the DESTROY command, 'in' instead of 'din', which caused another creation try instead of destroying. Cc: <[email protected]> # 4.15 Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface") Signed-off-by: Yishai Hadas <[email protected]> Reviewed-by: Artemy Kovalyov <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-03-17IB/mlx4: Fix race condition between catas error reset and aliasguid flowsJack Morgenstein1-1/+1
Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow. Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-03-18drm/udl: use drm_gem_object_put_unlocked.Dave Airlie1-1/+1
When Daniel removed struct_mutex he didn't fix this call to the unlocked variant which is required since we no longer use struct mutex. This fixes a bunch of: WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm] Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t> CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2 backtraces when you plug in a udl device. Fixes: ae358dacd217 (drm/udl: Get rid of dev->struct_mutex usage) Reviewed-by: Daniel Vetter <[email protected]> Cc: Sean Paul <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2019-03-17Linux 5.1-rc1Linus Torvalds1-2/+2
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds57-156/+153
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-17Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds3-125/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
2019-03-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption
2019-03-17Merge tag 'for-linus-5.1b-rc1b-tag' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
2019-03-17Merge tag '9p-for-5.1' of git://github.com/martinetd/linuxLinus Torvalds7-32/+55
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
2019-03-17auxdisplay: charlcd: make backlight initial state configurableMans Rullgard2-1/+30
The charlcd driver currently flashes the backlight once on init. This may not be desirable. Thus, add options for turning the backlight off or on as well. Signed-off-by: Mans Rullgard <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2019-03-17auxdisplay: charlcd: simplify init message displayMans Rullgard1-7/+8
If CONFIG_PANEL_CHANGE_MESSAGE is set, CONFIG_PANEL_BOOT_MESSAGE will also be defined, so the double ifdef is pointless. Simplify the code further by using an intermediate macro rather duplicating most of the line. Signed-off-by: Mans Rullgard <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.