| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit
65fd427 (USB: ehci tdi : let's tdi_reset set host mode)
broke the build using ARM's mx51_defconfig:
CC drivers/usb/host/ehci-hcd.o
In file included from drivers/usb/host/ehci-hcd.c:1166:
drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe':
drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function)
drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once
drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.)
drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp'
make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
Fix it together with the warning about the unused variable and use
msleep instead of mdelay as requested by Alan Stern.
Cc: Dinh Nguyen <[email protected]>
Cc: Alan Stern <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Tested-by: Nguyen Dinh-R00091 <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB
controller on powerpc. In this commit the Open Firmware code was selected
and compiled unconditionally.
This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX
series), because ARM don't have OF support (yet). This patch fixes the problem
by only selecting the OF code on systems with Open Firmware support.
Reported-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Compile-Tested-by: Uwe Kleine-König <[email protected]>
Acked-by: Grant Likely <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Instead of dealing with sched classes inside each check_preempt_curr()
implementation, pull out this logic into the generic wakeup preemption
path.
This fixes a hang in KVM (and others) where we are waiting for the
stop machine thread to run ...
Reported-by: Markus Trippelsdorf <[email protected]>
Tested-by: Marcelo Tosatti <[email protected]>
Tested-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <1288891946.2039.31.camel@laptop>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This is a big revert of a lot of -rc1 tidspbridge patches in order to
get the driver back into a working state. It also includes a OMAP patch
that was approved by the OMAP maintainer.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Reported-by: Oleg Nesterov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Remove anticipatory block I/O scheduler info from Documentation/
since the code has been deleted.
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: "Robert P. J. Day" <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Sometimes input handlers (as opposed to input devices) have a need to
inject (or re-inject) events back into input core. For example sysrq
filter may want to inject previously suppressed Alt-SysRq so that user
can take a screen print. In this case we do not want to pass such events
back to the same same handler that injected them to avoid loops.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
It is not allowed to call input_free_device() after calling
input_unregister_device() because input devices are refcounted and
unregister will free the device if we were holding he last referenc.
The preferred style in input/ is to make input_register_device() the
last function in the probe which can fail. That way we don't need to
call input_unregister_device().
Also do not need to call input_set_drvdata() as nothing in the driver
uses the data.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Add a missing usb_free_urb() in usb_acecad_probe() error path.
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
As noted by Steve Chen, since commit
f5fff5dc8a7a3f395b0525c02ba92c95d42b7390 ("tcp: advertise MSS
requested by user") we can end up with a situation where
tcp_select_initial_window() does a divide by a zero (or
even negative) mss value.
The problem is that sometimes we effectively subtract
TCPOLEN_TSTAMP_ALIGNED and/or TCPOLEN_MD5SIG_ALIGNED from the mss.
Fix this by increasing the minimum from 8 to 64.
Reported-by: Steve Chen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We already deliberately setup a 1-1 P2M for the region up to 1M in
order to allow code which assumes this region is already mapped to
work without having to convert everything to ioremap.
Domain 0 should not return any apparently unused memory regions
(reserved or otherwise) in this region to Xen since the e820 may not
accurately reflect what the BIOS has stashed in this region.
Signed-off-by: Ian Campbell <[email protected]>
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
|
|
The IRQ core code will take care of disabling and reenabling
interrupts over suspend resume automatically, therefore we do not need
to do this in the Xen event channel code.
The only exception is those event channels marked IRQF_NO_SUSPEND
which the IRQ core ignores. We must unmask these ourselves, taking
care to obey the current IRQ_DISABLED status. Failure check for
IRQ_DISABLED leads to enabling polled only event channels, such as
that associated with the pv spinlocks, which must never be enabled:
[ 21.970432] ------------[ cut here ]------------
[ 21.970432] kernel BUG at arch/x86/xen/spinlock.c:343!
[ 21.970432] invalid opcode: 0000 [#1] SMP
[ 21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate
[ 21.970432] Modules linked in:
[ 21.970432]
[ 21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34)
[ 21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3
[ 21.970432] EIP is at dummy_handler+0x3/0x7
[ 21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000
[ 21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10
[ 21.970432] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
[ 21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000)
[ 21.970432] Stack:
[ 21.970432] dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001
[ 21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284
[ 21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90
[ 21.970432] Call Trace:
[ 21.970432] [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122
[ 21.970432] [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55
[ 21.970432] [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f
[ 21.970432] [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30
[ 21.970432] [<c1030d47>] ? xen_do_upcall+0x7/0xc
[ 21.970432] [<c102007b>] ? apic_reg_read+0xd3/0x22d
[ 21.970432] [<c1002227>] ? hypercall_page+0x227/0x1005
[ 21.970432] [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14
[ 21.970432] [<c102da7c>] ? check_events+0x8/0xc
[ 21.970432] [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1
[ 21.970432] [<c105e485>] ? finish_task_switch+0x62/0xba
[ 21.970432] [<c14e3f84>] ? schedule+0x808/0x89d
[ 21.970432] [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22
[ 21.970432] [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162
[ 21.970432] [<c102f43a>] ? cpu_idle+0x6d/0x6f
[ 21.970432] [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf
[ 21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \
c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \
eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15
[ 21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10
[ 21.970432] ---[ end trace c0b71f7e12cf3011 ]---
Signed-off-by: Ian Campbell <[email protected]>
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
|
|
Since the OPP API is only useful with an appropraite SoC-specific
implementation there is no point in offering the ability to enable
the API on general systems. Provide an ARCH_HAS OPP Kconfig symbol
which masks out the option unless selected by an implementation.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Nishanth Menon <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Holding dpm_list_mtx across late suspend and early resume of devices
is problematic for the PCMCIA subsystem and doesn't allow device
objects to be removed by late suspend and early resume driver
callbacks. This appears to be overly restrictive, as drivers are
generally allowed to remove device objects in other phases of suspend
and resume. Therefore rework dpm_{suspend|resume}_noirq() so that
they don't have to hold dpm_list_mtx all the time.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
implementation"
This reverts commit d95ec7e2fd5cebf2f1caf3f572fa5e0a820ac5b1.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit 0c10e91b6cc9d1c6a23e9eed3e0653f30b6eb3d3.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit 4dd1944ab7242d76534c97d5fef0ce541a2f1040.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit e7396e77d9e4230bf725b5807732cbca191d111f.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit f265846db1e755c11498f6f7c011127dfcc5634a.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit 053fdb85f56e84bff64a65601be7f72608f016da.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit f94378f9f9a897fc08e9d12733401ae52466e408.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit b5a44939231d6e3b0354624289507bfa1432a7b1.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit db348ca36e5881cd1d2e5caa6eee7d0237d07a3d.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit b1ced160af36043ee80d354318794753b6b7c008.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit 2ab573487a98c06fdfb34308f641f09369d61fa2.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
This reverts commit ace5a3ce40bb90f14953c5e3f73e9cf1176b1a28.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
On 2.6.37-rc1, omap platform internals for SCM have changed,
so the build is broken again.
drivers/staging/tidspbridge/core/tiomap3430.c:26:
fatal error: plat/control.h: No such file or directory
This is a totally ugly layer violation, but needed until
omap_ctrl_set_dsp_boot*() are provided.
Signed-off-by: Felipe Contreras <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
There was commented out transfer_flags initialization.
And i think memset should fill entire structure, not only length of
pointer to it.
This makes the driver work properly now on my hardware.
Signed-off-by: Konstantin Katuev <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Also, don't be picky about the location, which incidentally fixes the
build since MEMBLOCK_REAL_LIMIT is gone on 2.6.37.
arch/arm/plat-omap/devices.c: In function 'omap_dsp_reserve_sdram_memblock':
arch/arm/plat-omap/devices.c:287: error: 'MEMBLOCK_REAL_LIMIT'
undeclared (first use in this function)
Signed-off-by: Felipe Contreras <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Omar Ramirez Luna <[email protected]>
|
|
Heiko reported that the TASK_RUNNING check is not sufficient for
CONFIG_PREEMPT=y since we can get preempted with !TASK_RUNNING.
He suggested adding a ->se.on_rq test to the existing TASK_RUNNING
one, however TASK_RUNNING will always have ->se.on_rq, so we might as
well reduce that to a single test.
[ stop tasks should never get preempted, but its good to handle
this case correctly should this ever happen ]
Reported-by: Heiko Carstens <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Currently we consider a sched domain to be well balanced when the imbalance
is less than the domain's imablance_pct. As the number of cores and threads
are increasing, current values of imbalance_pct (for example 25% for a
NUMA domain) are not enough to detect imbalances like:
a) On a WSM-EP system (two sockets, each having 6 cores and 12 logical threads),
24 cpu-hogging tasks get scheduled as 13 on one socket and 11 on another
socket. Leading to an idle HT cpu.
b) On a hypothetial 2 socket NHM-EX system (each socket having 8 cores and
16 logical threads), 16 cpu-hogging tasks can get scheduled as 9 on one
socket and 7 on another socket. Leaving one core in a socket idle
whereas in another socket we have a core having both its HT siblings busy.
While this issue can be fixed by decreasing the domain's imbalance_pct
(by making it a function of number of logical cpus in the domain), it
can potentially cause more task migrations across sched groups in an
overloaded case.
Fix this by using imbalance_pct only during newly_idle and busy
load balancing. And during idle load balancing, check if there
is an imbalance in number of idle cpu's across the busiest and this
sched_group or if the busiest group has more tasks than its weight that
the idle cpu in this_group can pull.
Reported-by: Nikhil Rao <[email protected]>
Signed-off-by: Suresh Siddha <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Jasper suggested we use the zeroing capability of the allocators
instead of calling memset ourselves. Add node affinity while we're at
it.
Reported-by: Jesper Juhl <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This patch corrects time tracking in samples. Without this patch
both time_enabled and time_running are bogus when user asks for
PERF_SAMPLE_READ.
One uses PERF_SAMPLE_READ to sample the values of other counters
in each sample. Because of multiplexing, it is necessary to know
both time_enabled, time_running to be able to scale counts correctly.
In this second version of the patch, we maintain a shadow
copy of ctx->time which allows us to compute ctx->time without
calling update_context_time() from NMI context. We avoid the
issue that update_context_time() must always be called with
ctx->lock held.
We do not keep shadow copies of the other event timings
because if the lead event is overflowing then it is active
and thus it's been scheduled in via event_sched_in() in
which case neither tstamp_stopped, tstamp_running can be modified.
This timing logic only applies to samples when PERF_SAMPLE_READ
is used.
Note that this patch does not address timing issues related
to sampling inheritance between tasks. This will be addressed
in a future patch.
With this patch, the libpfm4 example task_smpl now reports
correct counts (shown on 2.4GHz Core 2):
$ task_smpl -p 2400000000 -e unhalted_core_cycles:u,instructions_retired:u,baclears noploop 5
noploop for 5 seconds
IIP:0x000000004006d6 PID:5596 TID:5596 TIME:466,210,211,430 STREAM_ID:33 PERIOD:2,400,000,000 ENA=1,010,157,814 RUN=1,010,157,814 NR=3
2,400,000,254 unhalted_core_cycles:u (33)
2,399,273,744 instructions_retired:u (34)
53,340 baclears (35)
Signed-off-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In commit 20cb52ebd1b5ca6fa8a5d9b6b1392292f5ca8a45, titled
"xfs: simplify xfs_vm_writepage" I added an assert that any !mapped and
uptodate buffers are not dirty. That asserts turns out to trigger a lot
when running fsx on filesystems with small block sizes. The reason for
that is that the assert is simply incorrect. !mapped and uptodate
just mean this buffer covers a hole, and whenever we do a set_page_dirty
we mark all blocks in the page dirty, no matter if they have data or
not. So remove the assert, and update the comment above the condition
to match reality.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
set_init_cxt() allocted sizeof(struct aa_task_cxt) bytes for cxt,
if register_security() failed, it will cause memory leak.
Signed-off-by: Zhitong Wang <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: James Morris <[email protected]>
|
|
policy->name is a substring of policy->hname, if prefix is not NULL, it will
allocted strlen(prefix) + strlen(name) + 3 bytes to policy->hname in policy_init().
use kzfree(ns->base.name) will casue memory leak if alloc_namespace() failed.
Signed-off-by: Zhitong Wang <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: James Morris <[email protected]>
|
|
Robin Holt tried to boot a 16TB machine and found some limits were
reached : sysctl_tcp_mem[2], sysctl_udp_mem[2]
We can switch infrastructure to use long "instead" of "int", now
atomic_long_t primitives are available for free.
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Robin Holt <[email protected]>
Reviewed-by: Robin Holt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
packet_getname_spkt() doesn't initialize all members of sa_data field of
sockaddr struct if strlen(dev->name) < 13. This structure is then copied
to userland. It leads to leaking of contents of kernel stack memory.
We have to fully fill sa_data with strncpy() instead of strlcpy().
The same with packet_getname(): it doesn't initialize sll_pkttype field of
sockaddr_ll. Set it to zero.
Signed-off-by: Vasiliy Kulikov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A minor oversight from f7347ce4ee7c65415f84be915c018473e7076f31,
"fasync: re-organize fasync entry insertion to allow it under a
spinlock": this cleanup-on-error was only needed to handle -ENOMEM. Now
that we're preallocating it's unneeded.
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
We must also free the passed-in lease in the case it wasn't used because
an existing lease was upgrade/downgraded or already existed.
Note the nfsd caller doesn't care because it's fl_change callback
returns an error in those cases.
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
There is a possibility malicious users can get limited information about
uninitialized stack mem array. Even if sk_run_filter() result is bound
to packet length (0 .. 65535), we could imagine this can be used by
hostile user.
Initializing mem[] array, like Dan Rosenberg suggested in his patch is
expensive since most filters dont even use this array.
Its hard to make the filter validation in sk_chk_filter(), because of
the jumps. This might be done later.
In this patch, I use a bitmap (a single long var) so that only filters
using mem[] loads/stores pay the price of added security checks.
For other filters, additional cost is a single instruction.
[ Since we access fentry->k a lot now, cache it in a local variable
and mark filter entry pointer as const. -DaveM ]
Reported-by: Dan Rosenberg <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sometimes ax25_getname() doesn't initialize all members of fsa_digipeater
field of fsa struct, also the struct has padding bytes between
sax25_call and sax25_ndigis fields. This structure is then copied to
userland. It leads to leaking of contents of kernel stack memory.
Signed-off-by: Vasiliy Kulikov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
XFS does not need it's inodes to actuall be hashed in the VFS inode
cache, but we require the inode to be marked hashed for the
writeback code to work.
Insted of using insert_inode_hash, which requires a second
inode_lock roundtrip after the partial merge of the inode
scalability patches in 2.6.37-rc simply use the new hlist_add_fake
helper to mark it hashed without requiring a lock or touching a
global cache line.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
Andi Kleen reported that gcc-4.5 gives lots of warnings for him
inside the XFS code. It turned out most of them are due to the
quota stubs beeing macros, and gcc now complaining about macros
evaluating to 0 that are not assigned to variables.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
The filestreams code may take the iolock on the parent inode while
holding it on a child. This is the only place in XFS where we take
both the child and parent iolock, so just telling lockdep about it
is enough. The lock flag required for that was already added as
part of the ilock lockdep annotations and unused so far.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
The delayed write buffer split trace currently issues a trace for
every buffer it scans. These buffers are not necessarily queued for
delayed write. Indeed, when buffers are pinned, there can be
thousands of traces of buffers that aren't actually queued for
delayed write and the ones that are are lost in the noise. Move the
trace point to record only buffers that are split out for IO to be
issued on.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
The walk fails to decrement the per-ag reference count when the
non-blocking walk fails to obtain the per-ag reclaim lock, leading
to an assert failure on debug kernels when unmounting a filesystem.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
al_hreq is copied from userland. If al_hreq.buflen is not properly aligned
then xfs_attr_list will ignore the last bytes of kbuf. These bytes are
unitialized. It leads to leaking of contents of kernel stack memory.
Signed-off-by: Vasiliy Kulikov <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|
|
We promised to do this for 2.6.37, and the code looks stable enough to
keep that promise.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
|