aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-04init: fix error check in clean_path()Barret Rhoden1-1/+1
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced vfs_lstat(), the '!' was dropped. Fixes: 716308a5331b ("init: add an init_stat helper") Signed-off-by: Barret Rhoden <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-04MAINTAINERS: Add the security document to SECURITY CONTACTKrzysztof Kozlowski1-0/+1
When changing the document related to kernel security workflow, notify the security mailing list as its concerned by this. Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04driver code: print symbolic error codeMichał Mirosław1-2/+2
dev_err_probe() prepends the message with an error code. Let's make it more readable by translating the code to a more recognisable symbol. Fixes: a787e5400a1c ("driver core: add device probe log helper") Signed-off-by: Michał Mirosław <[email protected]> Link: https://lore.kernel.org/r/ea3f973e4708919573026fdce52c264db147626d.1598630856.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04debugfs: Fix module state check conditionVladis Dronov1-2/+2
The '#ifdef MODULE' check in the original commit does not work as intended. The code under the check is not built at all if CONFIG_DEBUG_FS=y. Fix this by using a correct check. Fixes: 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()") Signed-off-by: Vladis Dronov <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04video: fbdev: fix OOB read in vga_8planes_imageblit()Tetsuo Handa1-1/+1
syzbot is reporting OOB read at vga_8planes_imageblit() [1], for "cdat[y] >> 4" can become a negative value due to "const char *cdat". [1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132 Reported-by: syzbot <[email protected]> Signed-off-by: Tetsuo Handa <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04dyndbg: fix problem parsing format="foo bar"Jim Cromie1-21/+17
commit 14775b049642 ("dyndbg: accept query terms like file=bar and module=foo") added the combined keyword=value parsing poorly; revert most of it, keeping the keyword & arg change. Instead, fix the tokenizer for the new input, by terminating the keyword (an unquoted word) on '=' as well as space, thus letting the tokenizer work on the quoted argument, like it would have previously. Also add a few debug-prints to show more parsing context, into tokenizer and parse-query, and use "keyword, value" in others. Fixes: 14775b049642 ("dyndbg: accept query terms like file=bar and module=foo") Signed-off-by: Jim Cromie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04dyndbg: refine export, rename to dynamic_debug_exec_queries()Jim Cromie2-6/+41
commit 4c0d77828d4f ("dyndbg: export ddebug_exec_queries") had a few problems: - broken non DYNAMIC_DEBUG_CORE configs, sparse warning - the exported function modifies query string, breaks on RO strings. - func name follows internal convention, shouldn't be exposed as is. 1st is fixed in header with ifdefd function prototype or stub defn. Also remove an obsolete HAVE-symbol ifdef-comment, and add others. Fix others by wrapping existing internal function with a new one, named in accordance with module-prefix naming convention, before export hits v5.9.0. In new function, copy query string to a local buffer, so users can pass hard-coded/RO queries, and internal function can be used unchanged. Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries") Signed-off-by: Jim Cromie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04dyndbg: give %3u width in pr-format, cosmetic onlyJim Cromie1-1/+1
Specify the print-width so log entries line up nicely. no functional changes. Signed-off-by: Jim Cromie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04usb: core: fix slab-out-of-bounds Read in read_descriptorsZeng Tao1-0/+5
The USB device descriptor may get changed between two consecutive enumerations on the same device for some reason, such as DFU or malicius device. In that case, we may access the changing descriptor if we don't take the device lock here. The issue is reported: https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9 Cc: stable <[email protected]> Cc: Alan Stern <[email protected]> Reported-by: [email protected] Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute") Signed-off-by: Zeng Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04Revert "usb: dwc3: meson-g12a: fix shared reset control use"Amjad Ouled-Ameur1-9/+6
This reverts commit 7a410953d1fb4dbe91ffcfdee9cbbf889d19b0d7. This commit breaks USB on meson-gxl-s905x-libretech-cc. Reverting the change solves the issue. In fact, according to the reset framework code, consumers must not use reset_control_(de)assert() on shared reset lines when reset_control_reset has been used, and vice-versa. Moreover, with this commit, usb is not guaranted to be reset since the reset is likely to be initially deasserted. Reverting the commit will bring back the suspend warning mentioned in the commit description. Nevertheless, a warning is much less critical than breaking dwc3-meson-g12a USB completely. We will address the warning issue in another way as a 2nd step. Fixes: 7a410953d1fb ("usb: dwc3: meson-g12a: fix shared reset control use") Cc: stable <[email protected]> Signed-off-by: Amjad Ouled-Ameur <[email protected]> Reported-by: Jerome Brunet <[email protected]> Acked-by: Neil Armstrong <[email protected]> Acked-by: Philipp Zabel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04usb: typec: ucsi: acpi: Check the _DEP dependenciesHeikki Krogerus1-0/+4
Failing probe with -EPROBE_DEFER until all dependencies listed in the _DEP (Operation Region Dependencies) object have been met. This will fix an issue where on some platforms UCSI ACPI driver fails to probe because the address space handler for the operation region that the UCSI ACPI interface uses has not been loaded yet. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: [email protected] Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04usb: typec: intel_pmc_mux: Un-register the USB role switchMadhusudanarao Amara1-0/+2
Added missing code for un-register USB role switch in the remove and error path. Cc: Stable <[email protected]> # v5.8 Reviewed-by: Heikki Krogerus <[email protected]> Fixes: 6701adfa9693b ("usb: typec: driver for Intel PMC mux control") Signed-off-by: Madhusudanarao Amara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04usb: Fix out of sync data toggle if a configured device is reconfiguredMathias Nyman1-49/+42
Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable <[email protected]> Tested-by: Martin Thierer <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-04x86/entry: Unbreak 32bit fast syscallThomas Gleixner3-24/+91
Andy reported that the syscall treacing for 32bit fast syscall fails: # ./tools/testing/selftests/x86/ptrace_syscall_32 ... [RUN] SYSEMU [FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732) ... [RUN] SYSCALL [FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732) The eason is that the conversion to generic entry code moved the retrieval of the sixth argument (EBP) after the point where the syscall entry work runs, i.e. ptrace, seccomp, audit... Unbreak it by providing a split up version of syscall_enter_from_user_mode(). - syscall_enter_from_user_mode_prepare() establishes state and enables interrupts - syscall_enter_from_user_mode_work() runs the entry work Replace the call to syscall_enter_from_user_mode() in the 32bit fast syscall C-entry with the split functions and stick the EBP retrieval between them. Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function") Reported-by: Andy Lutomirski <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-04x86/debug: Allow a single level of #DB recursionAndy Lutomirski1-34/+31
Trying to clear DR7 around a #DB from usermode malfunctions if the tasks schedules when delivering SIGTRAP. Rather than trying to define a special no-recursion region, just allow a single level of recursion. The same mechanism is used for NMI, and it hasn't caused any problems yet. Fixes: 9f58fdde95c9 ("x86/db: Split out dr6/7 handling") Reported-by: Kyle Huey <[email protected]> Debugged-by: Josh Poimboeuf <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Daniel Thompson <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/8b9bd05f187231df008d48cf818a6a311cbd5c98.1597882384.git.luto@kernel.org Link: https://lore.kernel.org/r/[email protected]
2020-09-04x86/entry: Fix AC assertionPeter Zijlstra1-2/+10
The WARN added in commit 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") unconditionally triggers on a IVB machine because it does not support SMAP. For !SMAP hardware the CLAC/STAC instructions are patched out and thus if userspace sets AC, it is still have set after entry. Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Daniel Thompson <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-09-04tracing/kprobes, x86/ptrace: Fix regs argument order for i386Vamshi K Sthambamkadi1-1/+1
On i386, the order of parameters passed on regs is eax,edx,and ecx (as per regparm(3) calling conventions). Change the mapping in regs_get_kernel_argument(), so that arg1=ax arg2=dx, and arg3=cx. Running the selftests testcase kprobes_args_use.tc shows the result as passed. Fixes: 3c88ee194c28 ("x86: ptrace: Add function argument access API") Signed-off-by: Vamshi K Sthambamkadi <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/20200828113242.GA1424@cosmos
2020-09-04Merge tag 'icc-5.9-rc4' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman2-10/+27
into char-misc-linus Georgi writes: interconnect fixes for v5.9 This contains two fixes: - Fix the core to show correctly the bandwidth for disabled paths. - Fix a driver to make sure small values are not truncated. Signed-off-by: Georgi Djakov <[email protected]> * tag 'icc-5.9-rc4' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: Fix small BW votes being truncated to zero interconnect: Show bandwidth for disabled paths as zero in debugfs
2020-09-04drm/virtio: drop virtio_gpu_output->enabledGerd Hoffmann3-6/+1
Not needed, already tracked by drm_crtc_state->active. Signed-off-by: Gerd Hoffmann <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 1174c8a0f33c1e5c442ac40381fe124248c08b3a)
2020-09-04Merge tag 'phy-fixes-5.9' of ↵Greg Kroah-Hartman4-17/+53
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus Vinod writes: phy: fixes for 5.9 *) platform_no_drv_owner.cocci and return value check qcom ipq806x-usb driver *) correcting register programming for ipq8074 phy *) disable PHY charger detect for omap-usb2-phy * tag 'phy-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings
2020-09-04Merge tag 'soundwire-5.9-fixes' of ↵Greg Kroah-Hartman2-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus Vinod writes: soundwire fixes for v5.8 This contains two fixes to sdw core for dangling pointer and a typo for INTSTAT register * tag 'soundwire-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: fix double free of dangling pointer soundwire: bus: fix typo in comment on INTSTAT registers
2020-09-04iommu/vt-d: Handle 36bit addressing for x86-32Chris Wilson1-7/+7
Beware that the address size for x86-32 may exceed unsigned long. [ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14 [ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int' If we don't handle the wide addresses, the pages are mismapped and the device read/writes go astray, detected as DMAR faults and leading to device failure. The behaviour changed (from working to broken) in commit fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer"), but the error looks older. Fixes: fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Chris Wilson <[email protected]> Acked-by: Lu Baolu <[email protected]> Cc: James Sewart <[email protected]> Cc: Lu Baolu <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: <[email protected]> # v5.3+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04iommu/amd: Do not use IOMMUv2 functionality when SME is activeJoerg Roedel1-0/+7
When memory encryption is active the device is likely not in a direct mapped domain. Forbid using IOMMUv2 functionality for now until finer grained checks for this have been implemented. Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04iommu/amd: Do not force direct mapping when SME is activeJoerg Roedel1-1/+6
Do not force devices supporting IOMMUv2 to be direct mapped when memory encryption is active. This might cause them to be unusable because their DMA mask does not include the encryption bit. Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04KVM: arm64: Update page shift if stage 2 block mapping not supportedAlexandru Elisei1-0/+1
Commit 196f878a7ac2e (" KVM: arm/arm64: Signal SIGBUS when stage2 discovers hwpoison memory") modifies user_mem_abort() to send a SIGBUS signal when the fault IPA maps to a hwpoisoned page. Commit 1559b7583ff6 ("KVM: arm/arm64: Re-check VMA on detecting a poisoned page") changed kvm_send_hwpoison_signal() to use the page shift instead of the VMA because at that point the code had already released the mmap lock, which means userspace could have modified the VMA. If userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to map the guest fault IPA using block mappings in stage 2. That is not always possible, if, for example, userspace uses dirty page logging for the VM. Update the page shift appropriately in those cases when we downgrade the stage 2 entry from a block mapping to a page. Fixes: 1559b7583ff6 ("KVM: arm/arm64: Re-check VMA on detecting a poisoned page") Signed-off-by: Alexandru Elisei <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-04KVM: arm64: Fix address truncation in tracesMarc Zyngier2-11/+11
Owing to their ARMv7 origins, the trace events are truncating most address values to 32bits. That's not really helpful. Expand the printing of such values to their full glory. Signed-off-by: Marc Zyngier <[email protected]>
2020-09-04iommu/amd: Use cmpxchg_double() when updating 128-bit IRTESuravee Suthikulpanit3-7/+33
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Tested-by: Erik Rockstrom <[email protected]> Reviewed-by: Joao Martins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04iommu/amd: Restore IRTE.RemapEn bit after programming IRTESuravee Suthikulpanit1-0/+2
Currently, the RemapEn (valid) bit is accidentally cleared when programming IRTE w/ guestMode=0. It should be restored to the prior state. Fixes: b9fc6b56f478 ("iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices") Signed-off-by: Suravee Suthikulpanit <[email protected]> Reviewed-by: Joao Martins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04thermal: core: Fix use-after-free in thermal_zone_device_unregister()Dmitry Osipenko1-2/+3
The user-after-free bug in thermal_zone_device_unregister() is reported by KASAN. It happens because struct thermal_zone_device is released during of device_unregister() invocation, and hence the "tz" variable shouldn't be touched by thermal_notify_tz_delete(tz->id). Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework") Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-04thermal: qcom-spmi-temp-alarm: Don't suppress negative tempVeera Vegivada1-2/+2
Currently driver is suppressing the negative temperature readings from the vadc. Consumers of the thermal zones need to read the negative temperature too. Don't suppress the readings. Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver") Signed-off-by: Veera Vegivada <[email protected]> Signed-off-by: Guru Das Srinagesh <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
2020-09-04KVM: arm64: Do not try to map PUDs when they are folded into PMDMarc Zyngier1-1/+6
For the obscure cases where PMD and PUD are the same size (64kB pages with 42bit VA, for example, which results in only two levels of page tables), we can't map anything as a PUD, because there is... erm... no PUD to speak of. Everything is either a PMD or a PTE. So let's only try and map a PUD when its size is different from that of a PMD. Cc: [email protected] Fixes: b8e0ba7c8bea ("KVM: arm64: Add support for creating PUD hugepages at stage 2") Reported-by: Gavin Shan <[email protected]> Reported-by: Eric Auger <[email protected]> Reviewed-by: Alexandru Elisei <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Tested-by: Gavin Shan <[email protected]> Tested-by: Eric Auger <[email protected]> Tested-by: Alexandru Elisei <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2020-09-04thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430Tony Lindgren2-14/+19
We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Sebastian Reichel <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-04iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()Lu Baolu1-45/+55
The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <[email protected]> Reported-by: Wendy Wang <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Tested-by: Torsten Hilbrich <[email protected]> Link: https://lore.kernel.org/linux-iommu/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04iommu/vt-d: Serialize IOMMU GCMD register modificationsLu Baolu1-2/+8
The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General Description) that: If multiple control fields in this register need to be modified, software must serialize the modifications through multiple writes to this register. However, in irq_remapping.c, modifications of IRE and CFI are done in one write. We need to do two separate writes with STS checking after each. It also checks the status register before writing command register to avoid unnecessary register write. Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess") Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Jacob Pan <[email protected]> Cc: Kevin Tian <[email protected]> Cc: Ashok Raj <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers moveLukas Bulwahn1-1/+1
Commit e86d1aa8b60f ("iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory") moved drivers/iommu/qcom_iommu.c to drivers/iommu/arm/arm-smmu/qcom_iommu.c amongst other moves, adjusted some sections in MAINTAINERS, but missed adjusting the QUALCOMM IOMMU section. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/iommu/qcom_iommu.c Update the file entry in MAINTAINERS to the new location. Signed-off-by: Lukas Bulwahn <[email protected]> Acked-by: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-09-04drm/sun4i: backend: Disable alpha on the lowest plane on the A20Maxime Ripard1-1/+0
Unlike we previously thought, the per-pixel alpha is just as broken on the A20 as it is on the A10. Remove the quirk that says we can use it. Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Cc: Paul Kocialkowski <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-04drm/sun4i: backend: Support alpha property on lowest planeMaxime Ripard1-2/+1
Unlike what we previously thought, only the per-pixel alpha is broken on the lowest plane and the per-plane alpha isn't. Remove the check on the alpha property being set on the lowest plane to reject a mode. Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Cc: Paul Kocialkowski <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-04drm/sun4i: Fix DE2 YVU handlingJernej Skrabec1-1/+1
Function sun8i_vi_layer_get_csc_mode() is supposed to return CSC mode but due to inproper return type (bool instead of u32) it returns just 0 or 1. Colors are wrong for YVU formats because of that. Fixes: daab3d0e8e2b ("drm/sun4i: de2: csc_mode in de2 format struct is mostly redundant") Reported-by: Roman Stratiienko <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Tested-by: Roman Stratiienko <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-04xen: add helpers to allocate unpopulated memoryRoger Pau Monne10-15/+219
To be used in order to create foreign mappings. This is based on the ZONE_DEVICE facility which is used by persistent memory devices in order to create struct pages and kernel virtual mappings for the IOMEM areas of such devices. Note that on kernels without support for ZONE_DEVICE Xen will fallback to use ballooned pages in order to create foreign mappings. The newly added helpers use the same parameters as the existing {alloc/free}_xenballooned_pages functions, which allows for in-place replacement of the callers. Once a memory region has been added to be used as scratch mapping space it will no longer be released, and pages returned are kept in a linked list. This allows to have a buffer of pages and prevents resorting to frequent additions and removals of regions. If enabled (because ZONE_DEVICE is supported) the usage of the new functionality untangles Xen balloon and RAM hotplug from the usage of unpopulated physical memory ranges to map foreign pages, which is the correct thing to do in order to avoid mappings of foreign pages depend on memory hotplug. Note the driver is currently not enabled on Arm platforms because it would interfere with the identity mapping required on some platforms. Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-09-04memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERICRoger Pau Monne3-7/+6
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also being used by non DAX devices. No functional change intended. Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Acked-by: Andrew Morton <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-09-04xen/balloon: add header guardRoger Pau Monne1-0/+4
In order to protect against the header being included multiple times on the same compilation unit. Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2020-09-04padata: fix possible padata_works_lock deadlockDaniel Jordan1-2/+3
syzbot reports, WARNING: inconsistent lock state 5.9.0-rc2-syzkaller #0 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. syz-executor.0/26715 takes: (padata_works_lock){+.?.}-{2:2}, at: padata_do_parallel kernel/padata.c:220 {IN-SOFTIRQ-W} state was registered at: spin_lock include/linux/spinlock.h:354 [inline] padata_do_parallel kernel/padata.c:220 ... __do_softirq kernel/softirq.c:298 ... sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1091 asm_sysvec_apic_timer_interrupt arch/x86/include/asm/idtentry.h:581 Possible unsafe locking scenario: CPU0 ---- lock(padata_works_lock); <Interrupt> lock(padata_works_lock); padata_do_parallel() takes padata_works_lock with softirqs enabled, so a deadlock is possible if, on the same CPU, the lock is acquired in process context and then softirq handling done in an interrupt leads to the same path. Fix by leaving softirqs disabled while do_parallel holds padata_works_lock. Reported-by: [email protected] Fixes: 4611ce2246889 ("padata: allocate work structures for parallel jobs from a pool") Signed-off-by: Daniel Jordan <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Steffen Klassert <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Herbert Xu <[email protected]>
2020-09-04x86, fakenuma: Fix invalid starting node IDHuang Ying1-1/+1
Commit: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability") uses "-1" as the starting node ID, which causes the strange kernel log as follows, when "numa=fake=32G" is added to the kernel command line: Faking node -1 at [mem 0x0000000000000000-0x0000000893ffffff] (35136MB) Faking node 0 at [mem 0x0000001840000000-0x000000203fffffff] (32768MB) Faking node 1 at [mem 0x0000000894000000-0x000000183fffffff] (64192MB) Faking node 2 at [mem 0x0000002040000000-0x000000283fffffff] (32768MB) Faking node 3 at [mem 0x0000002840000000-0x000000303fffffff] (32768MB) And finally the kernel crashes: BUG: Bad page state in process swapper pfn:00011 page:(____ptrval____) refcount:0 mapcount:1 mapping:(____ptrval____) index:0x55cd7e44b270 pfn:0x11 failed to read mapping contents, not a valid kernel address? flags: 0x5(locked|uptodate) raw: 0000000000000005 000055cd7e44af30 000055cd7e44af50 0000000100000006 raw: 000055cd7e44b270 000055cd7e44b290 0000000000000000 000055cd7e44b510 page dumped because: page still charged to cgroup page->mem_cgroup:000055cd7e44b510 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-rc2 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 Call Trace: dump_stack+0x57/0x80 bad_page.cold+0x63/0x94 __free_pages_ok+0x33f/0x360 memblock_free_all+0x127/0x195 mem_init+0x23/0x1f5 start_kernel+0x219/0x4f5 secondary_startup_64+0xb6/0xc0 Fix this bug via using 0 as the starting node ID. This restores the original behavior before cc9aec03e58f. [ mingo: Massaged the changelog. ] Fixes: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability") Signed-off-by: "Huang, Ying" <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-03Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of ↵Linus Torvalds11-18/+49
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Use uintptr_t when casting numbers to pointers - Keep output expected by 3rd parties: Turn off summary for interval mode by default. - BPF is in kernel space, make sure do_validate_kcore_modules() knows about that. - Explicitly call out event modifiers in the documentation. - Fix jevents() allocation of space for regular expressions. - Address libtraceevent build warnings on 32-bit arches. - Fix checking of functions returns using ERR_PTR() in 'perf bench'. * tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add bpf image check to __map__is_kmodule perf record/stat: Explicitly call out event modifiers in the documentation perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) perf stat: Turn off summary for interval mode by default libtraceevent: Fix build warning on 32-bit arches perf jevents: Fix suspicious code in fixregex() perf parse-events: Use uintptr_t when casting numbers to pointers
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds110-599/+1068
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03Merge branch 'gate-page-refcount' (patches from Dave Hansen)Linus Torvalds2-3/+21
Merge gate page refcount fix from Dave Hansen: "During the conversion over to pin_user_pages(), gate pages were missed. The fix is pretty simple, and is accompanied by a new test from Andy which probably would have caught this earlier" * emailed patches from Dave Hansen <[email protected]>: selftests/x86/test_vsyscall: Improve the process_vm_readv() test mm: fix pin vs. gup mismatch with gate pages
2020-09-03selftests/x86/test_vsyscall: Improve the process_vm_readv() testAndy Lutomirski1-2/+20
The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Cc: [email protected] Cc: Peter Zijlstra <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Jann Horn <[email protected]> Cc: John Hubbard <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-03mm: fix pin vs. gup mismatch with gate pagesDave Hansen1-1/+1
Gate pages were missed when converting from get to pin_user_pages(). This can lead to refcount imbalances. This is reliably and quickly reproducible running the x86 selftests when vsyscall=emulate is enabled (the default). Fix by using try_grab_page() with appropriate flags passed. The long story: Today, pin_user_pages() and get_user_pages() are similar interfaces for manipulating page reference counts. However, "pins" use a "bias" value and manipulate the actual reference count by 1024 instead of 1 used by plain "gets". That means that pin_user_pages() must be matched with unpin_user_pages() and can't be mixed with a plain put_user_pages() or put_page(). Enter gate pages, like the vsyscall page. They are pages usually in the kernel image, but which are mapped to userspace. Userspace is allowed access to them, including interfaces using get/pin_user_pages(). The refcount of these kernel pages is manipulated just like a normal user page on the get/pin side so that the put/unpin side can work the same for normal user pages or gate pages. get_gate_page() uses try_get_page() which only bumps the refcount by 1, not 1024, even if called in the pin_user_pages() path. If someone pins a gate page, this happens: pin_user_pages() get_gate_page() try_get_page() // bump refcount +1 ... some time later unpin_user_pages() page_ref_sub_and_test(page, 1024)) ... and boom, we get a refcount off by 1023. This is reliably and quickly reproducible running the x86 selftests when booted with vsyscall=emulate (the default). The selftests use ptrace(), but I suspect anything using pin_user_pages() on gate pages could hit this. To fix it, simply use try_grab_page() instead of try_get_page(), and pass 'gup_flags' in so that FOLL_PIN can be respected. This bug traces back to the very beginning of the FOLL_PIN support in commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in the 5.7 release. Signed-off-by: Dave Hansen <[email protected]> Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Reported-by: Peter Zijlstra <[email protected]> Reviewed-by: John Hubbard <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Cc: [email protected] Cc: Jann Horn <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-04Merge branch 'linux-5.9' of git://github.com/skeggsb/linux into drm-fixesDave Airlie4-3/+12
A couple of minor fixes to the display changes that went in for 5.9. The most important of which is a workaround for a HW bug that was exposed by better push buffer space management, leading to random(ish...) display engine hangs. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com
2020-09-04Merge tag 'drm-intel-fixes-2020-09-03' of ↵Dave Airlie3-8/+31
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc4: - Clang build warning fix - HDCP fixes Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.