aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-04-19net: mvpp2: Fix DMA address mask sizeMaxime Chevallier1-5/+7
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were used (GENMASK_ULL(40, 0)). This commit fixes that by using the correct mask. Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors") Signed-off-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: change the comment of dev_mc_initsunlianwen1-1/+1
The comment of dev_mc_init() is wrong. which use dev_mc_flush instead of dev_mc_init. Signed-off-by: Lianwen Sun <[email protected] Signed-off-by: David S. Miller <[email protected]>
2018-04-19ALSA: rawmidi: Fix missing input substream checks in compat ioctlsTakashi Iwai1-6/+12
Some rawmidi compat ioctls lack of the input substream checks (although they do check only for rfile->output). This many eventually lead to an Oops as NULL substream is passed to the rawmidi core functions. Fix it by adding the proper checks before each function call. The bug was spotted by syzkaller. Reported-by: [email protected] Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19coresight: Move to SPDX identifierMathieu Poirier9-88/+9
Move CoreSight headers to the SPDX identifier. Signed-off-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-19drm/amd/powerplay: header file interface to SMU updateKenneth Feng1-1/+3
update vega12 smu interface. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-04-19drm/amd/pp: Fix bug voltage can't be OD separately on VIRex Zhu1-6/+10
Make sure to update the MCLK and SCLK flags when setting the VDDC flags due to dependencies. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-04-19drm/amd/display: Don't program bypass on linear regamma LUTHarry Wentland1-7/+0
Even though this is required for degamma since DCE HW only supports a couple predefined LUTs we can just program the LUT directly for regamma. This fixes dark screens which occurs when we program regamma to bypass while degamma is using srgb LUT. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Leo Li <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-04-19netfilter: xt_connmark: do not cast xt_connmark_tginfo1 to xt_connmark_tginfo2Pablo Neira Ayuso1-16/+22
These structures have different layout, fill xt_connmark_tginfo2 with old fields in xt_connmark_tginfo1. Based on patch from Jack Ma. Fixes: 472a73e00757 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-04-19mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCsWolfram Sang1-6/+33
Early revisions of certain SoCs cannot do multiple DMA RX streams in parallel. To avoid data corruption, only allow one DMA RX channel and fall back to PIO, if needed. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Yoshihiro Shimoda <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Reviewed-by: Simon Horman <[email protected]> Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2018-04-19clocksource/imx-tpm: Correct -ETIME return condition checkAnson Huang1-1/+1
The additional brakects added to tpm_set_next_event's return value computation causes (int) forced type conversion NOT taking effect, and the incorrect value return will cause various system timer issue, like RCU stall etc.. Remove the additional brackets to make sure tpm_set_next_event always returns correct value. Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Dong Aisheng <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-04-19posix-cpu-timers: Ensure set_process_cpu_timer is always evaluatedLaura Abbott1-1/+3
Commit a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") moved the check into the 'if' statement. Unfortunately, it did so on the right side of an && which means that it may get short circuited and never evaluated. This is easily reproduced with: $ cat loop.c void main() { struct rlimit res; /* set the CPU time limit */ getrlimit(RLIMIT_CPU,&res); res.rlim_cur = 2; res.rlim_max = 2; setrlimit(RLIMIT_CPU,&res); while (1); } Which will hang forever instead of being killed. Fix this by pulling the evaluation out of the if statement but checking the return value instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337 Fixes: a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: "Max R . P . Grossmann" <[email protected]> Cc: John Stultz <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-04-19netfilter: nf_tables: fix out-of-bounds in nft_chain_commit_updateTaehee Yoo1-1/+1
When chain name is changed, nft_chain_commit_update is called. In the nft_chain_commit_update, trans->ctx.chain->name has old chain name and nft_trans_chain_name(trans) has new chain name. If new chain name is longer than old chain name, KASAN warns slab-out-of-bounds. [ 175.015012] BUG: KASAN: slab-out-of-bounds in strcpy+0x9e/0xb0 [ 175.022735] Write of size 1 at addr ffff880114e022da by task iptables-compat/1458 [ 175.031353] CPU: 0 PID: 1458 Comm: iptables-compat Not tainted 4.16.0-rc7+ #146 [ 175.031353] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 175.031353] Call Trace: [ 175.031353] dump_stack+0x68/0xa0 [ 175.031353] print_address_description+0xd0/0x260 [ 175.031353] ? strcpy+0x9e/0xb0 [ 175.031353] kasan_report+0x234/0x350 [ 175.031353] __asan_report_store1_noabort+0x1c/0x20 [ 175.031353] strcpy+0x9e/0xb0 [ 175.031353] nf_tables_commit+0x1ccc/0x2990 [ 175.031353] nfnetlink_rcv+0x141e/0x16c0 [ 175.031353] ? nfnetlink_net_init+0x150/0x150 [ 175.031353] ? lock_acquire+0x370/0x370 [ 175.031353] ? lock_acquire+0x370/0x370 [ 175.031353] netlink_unicast+0x444/0x640 [ 175.031353] ? netlink_attachskb+0x700/0x700 [ 175.031353] ? _copy_from_iter_full+0x180/0x740 [ 175.031353] ? kasan_check_write+0x14/0x20 [ 175.031353] ? _copy_from_user+0x9b/0xd0 [ 175.031353] netlink_sendmsg+0x845/0xc70 [ ... ] Steps to reproduce: iptables-compat -N 1 iptables-compat -E 1 aaaaaaaaa Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-04-19netfilter: nf_tables: NAT chain and extensions require NF_TABLESPablo Neira Ayuso1-27/+28
Move these options inside the scope of the 'if' NF_TABLES and NF_TABLES_IPV6 dependencies. This patch fixes: net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_nat_do_chain': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:37: undefined reference to `nft_do_chain' net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_chain_nat_ipv6_exit': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:94: undefined reference to `nft_unregister_chain_type' net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_chain_nat_ipv6_init': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:87: undefined reference to `nft_register_chain_type' that happens with: CONFIG_NF_TABLES=m CONFIG_NFT_CHAIN_NAT_IPV6=y Fixes: 02c7b25e5f54 ("netfilter: nf_tables: build-in filter chain type") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-04-19ALSA: hda/realtek - adjust the location of one micHui Wang1-0/+1
There are two front mics on this machine, if we don't adjust the location for one of them, they will have the same mixer name, pulseaudio can't handle this situation. After applying this FIXUP, they will have different mixer name, then pulseaudio can handle them correctly. Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19ALSA: hda/realtek - set PINCFG_HEADSET_MIC to parse_flagsHui Wang1-0/+2
Otherwise, the pin will be regarded as microphone, and the jack name is "Mic Phantom", it is always on in the pulseaudio even nothing is plugged into the jack. So the UI is confusing to users since the microphone always shows up in the UI even there is no microphone plugged. After adding this flag, the jack name is "Headset Mic Phantom", then the pulseaudio can handle its detection correctly. Fixes: f0ba9d699e5c ("ALSA: hda/realtek - Fix Dell headset Mic can't record") Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19HID: i2c-hid: fix inverted return value from i2c_hid_command()Jiri Kosina1-1/+1
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2018-04-19powerpc/kvm: Fix lockups when running KVM guests on Power8Michael Ellerman1-2/+2
When running KVM guests on Power8 we can see a lockup where one CPU stops responding. This often leads to a message such as: watchdog: CPU 136 detected hard LOCKUP on other CPUs 72 Task dump for CPU 72: qemu-system-ppc R running task 10560 20917 20908 0x00040004 And then backtraces on other CPUs, such as: Task dump for CPU 48: ksmd R running task 10032 1519 2 0x00000804 Call Trace: ... --- interrupt: 901 at smp_call_function_many+0x3c8/0x460 LR = smp_call_function_many+0x37c/0x460 pmdp_invalidate+0x100/0x1b0 __split_huge_pmd+0x52c/0xdb0 try_to_unmap_one+0x764/0x8b0 rmap_walk_anon+0x15c/0x370 try_to_unmap+0xb4/0x170 split_huge_page_to_list+0x148/0xa30 try_to_merge_one_page+0xc8/0x990 try_to_merge_with_ksm_page+0x74/0xf0 ksm_scan_thread+0x10ec/0x1ac0 kthread+0x160/0x1a0 ret_from_kernel_thread+0x5c/0x78 This is caused by commit 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle"), which added a check in pnv_powersave_wakeup() to see if the kvm_hstate.hwthread_state is already set to KVM_HWTHREAD_IN_KERNEL, and if so to skip the store and test of kvm_hstate.hwthread_req. The problem is that the primary does not set KVM_HWTHREAD_IN_KVM when entering the guest, so it can then come out to cede with KVM_HWTHREAD_IN_KERNEL set. It can then go idle in kvm_do_nap after setting hwthread_req to 1, but because hwthread_state is still KVM_HWTHREAD_IN_KERNEL we will skip the test of hwthread_req when we wake up from idle and won't go to kvm_start_guest. From there the thread will return somewhere garbage and crash. Fix it by skipping the store of hwthread_state, but not the test of hwthread_req, when coming out of idle. It's OK to skip the sync in that case because hwthread_req will have been set on the same thread, so there is no synchronisation required. Fixes: 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle") Signed-off-by: Michael Ellerman <[email protected]>
2018-04-18cifs: smbd: Check for iov length on sending the last iovLong Li1-0/+2
When sending the last iov that breaks into smaller buffers to fit the transfer size, it's necessary to check if this is the last iov. If this is the latest iov, stop and proceed to send pages. Signed-off-by: Long Li <[email protected]> Cc: [email protected] Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-04-19powerpc/eeh: Fix enabling bridge MMIO windowsMichael Neuling1-1/+2
On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset") Cc: [email protected] # v3.11+ Reported-by: Pridhiviraj Paidipeddi <[email protected]> Signed-off-by: Michael Neuling <[email protected]> Acked-by: Russell Currey <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-04-18net: qualcomm: rmnet: Fix warning seen with fill_infoSubash Abhinov Kasiviswanathan1-5/+6
When the last rmnet device attached to a real device is removed, the real device is unregistered from rmnet. As a result, the real device lookup fails resulting in a warning when the fill_info handler is called as part of the rmnet device unregistration. Fix this by returning the rmnet flags as 0 when no real device is present. WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254 rtmsg_ifinfo_build_skb+0xca/0x10d Modules linked in: CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1 Stack: 7fe655f0 60371ea3 00000000 00000000 60282bc6 6006b116 7fe65600 60371ee8 7fe65660 6003a68c 00000000 900000000 Call Trace: [<6006b116>] ? printk+0x0/0x94 [<6001f375>] show_stack+0xfe/0x158 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d [<6006b116>] ? printk+0x0/0x94 [<60371ee8>] dump_stack+0x2a/0x2c [<6003a68c>] __warn+0x10e/0x13e [<6003a82c>] warn_slowpath_null+0x48/0x4f [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43 [<60282d03>] rtmsg_ifinfo+0x24/0x28 [<60264e86>] dev_close_many+0xba/0x119 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28 [<6027c225>] ? rtnl_is_locked+0x0/0x1c [<6026ca67>] rollback_registered_many+0x1ae/0x4ae [<600314be>] ? unblock_signals+0x0/0xae [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec [<6026ceec>] unregister_netdevice_many+0x21/0xa1 [<6027c765>] rtnl_delete_link+0x3e/0x4e [<60280ecb>] rtnl_dellink+0x262/0x29c [<6027c241>] ? rtnl_get_link+0x0/0x3e [<6027f867>] rtnetlink_rcv_msg+0x235/0x274 Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info") Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19btrfs: fix unaligned access in readdirDavid Sterba1-8/+12
The last update to readdir introduced a temporary buffer to store the emitted readdir data, but as there are file names of variable length, there's a lot of unaligned access. This was observed on a sparc64 machine: Kernel unaligned access at TPC[102f3080] btrfs_real_readdir+0x51c/0x718 [btrfs] Fixes: 23b5ec74943 ("btrfs: fix readdir deadlock with pagefault") CC: [email protected] # 4.14+ Reported-and-tested-by: René Rebe <[email protected]> Reviewed-by: Liu Bo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-04-19tools/bpf: fix test_sock and test_sock_addr.sh failureYonghong Song3-2/+4
The bpf selftests test_sock and test_sock_addr.sh failed in my test machine. The failure looks like: $ ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL] Test case: sock_create load w/ expected_attach_type .. [FAIL] Test case: attach type mismatch bind4 vs bind6 .. [FAIL] ... Summary: 4 PASSED, 12 FAILED $ ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ..... ERROR: Timeout waiting for test IP to become available. In test_sock, bpf program loads failed due to hitting memlock limits. In test_sock_addr.sh, my test machine is a ipv6 only test box and using "ping" without specifying address family for an ipv6 address does not work. This patch fixed the issue by including header bpf_rlimit.h in test_sock.c and test_sock_addr.c, and specifying address family for ping command. Cc: Andrey Ignatov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Acked-by: Andrey Ignatov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-04-18MIPS: uaccess: Add micromips clobbers to bzero invocationMatt Redfearn1-2/+9
The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by: James Hogan <[email protected]> Signed-off-by: Matt Redfearn <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: <[email protected]> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/19110/ Signed-off-by: James Hogan <[email protected]>
2018-04-18MIPS: memset.S: Fix clobber of v1 in last_fixupMatt Redfearn1-1/+1
The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by: James Hogan <[email protected]> Signed-off-by: Matt Redfearn <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/19109/ Signed-off-by: James Hogan <[email protected]>
2018-04-18Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds2-35/+76
Pull ceph fixes from Ilya Dryomov: "A couple of follow-up patches for -rc1 changes in rbd, support for a timeout on waiting for the acquisition of exclusive lock and a fix for uninitialized memory access in CephFS, marked for stable" * tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client: rbd: notrim map option rbd: adjust queue limits for "fancy" striping rbd: avoid Wreturn-type warnings ceph: always update atime/mtime/ctime for new inode rbd: support timeout in rbd_wait_state_locked() rbd: refactor rbd_wait_state_locked()
2018-04-18perf test BPF: Fixup BPF test using epoll_pwait syscall function probeArnaldo Carvalho de Melo1-1/+1
Since e145242ea0df ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") changed the main syscall function for 'epoll_pwait' to something other than the expected 'SyS_epoll_pwait the' 'perf test BPF' entries started failing, fix it by using something called from the main syscall function instead, 'epoll_wait', which should keep this test working in older kernels too. Before: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : FAILED! 40.2: BPF pinning : Skip 40.3: BPF prologue generation : Skip 40.4: BPF relocation checker : Skip If we use -v for that test we see the problem: Probe point 'SyS_epoll_pwait' not found. After: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok # Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf tests mmap: Show which tracepoint is failingArnaldo Carvalho de Melo1-1/+1
In the 'perf test "mmap interface"' we try creating events for several tracepoints, but when perf_evsel__new() fails we're not showing which one is failing, fix that to help diagnosing problems, such as the syscall tracepoints ones being found and fixes in this merge window. Now the failing tests shows: # perf test -v "mmap interface" 4: Read samples using the mmap interface : --- start --- test child forked, pid 14311 <SNIP> perf_evsel__new(sys_enter_getppid) test child finished with -1 ---- end ---- Read samples using the mmap interface: FAILED! # Now to check why the syscalls:sys_enter_getppid is failing... # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory # Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf tools: Add '\n' at the end of parse-options error messagesRavi Bangoria1-3/+3
Few error messages does not have '\n' at the end and thus next prompt gets printed in the same line. Ex, linux~$ perf buildid-cache -verbose --add ./a.out Error: did you mean `--verbose` (with two dashes ?)linux~$ Fix it. Signed-off-by: Ravi Bangoria <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Krister Johansen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Philippe Ombredanne <[email protected]> Cc: Sihyeon Jang <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf record: Remove suggestion to enable APICAndi Kleen1-2/+1
'perf record' suggests to enable the APIC on errors. APIC is practically always used today and the problem is usually somewhere else. Just remove the outdated suggestion. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf record: Remove misleading error suggestionAndi Kleen1-2/+1
When perf record encounters an error setting up an event it suggests to enable CONFIG_PERF_EVENTS. This is misleading because: - Usually it is enabled (it is really hard to disable on x86) - The problem is usually somewhere else, e.g. the CPU is not supported or an invalid configuration has been used. Remove the misleading suggestion. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf hists browser: Clarify top/report browser helpAndi Kleen1-1/+1
Clarify in the browser help that ESC in tui mode may go back to the previous screen instead of just exiting (was not clear to me) Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf mem: Allow all record/report optionsAndi Kleen2-2/+5
For perf mem report / perf mem record, pass all unknown options through to the underlying report/record commands. This makes things like perf mem record -a sleep 1 work. Matches how c2c and other tools work. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf trace: Support MAP_FIXED_NOREPLACEArnaldo Carvalho de Melo1-0/+3
Introduced in a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE"), and now that we have that define in the just syncronized tools/arch/*/include/uapi/asm/mman.h files, add support for it. This should really transition to autogeneration of string tables as done for various other things: $ ls /tmp/build/perf/trace/beauty/generated/*.c arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c pkey_alloc_access_rights_array.c prctl_option_array.c $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c static const char *madvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [8] = "FREE", [9] = "REMOVE", [10] = "DONTFORK", [11] = "DOFORK", $ Till then, add support for this the old way. Also it has to be ifdef'ed, because arches like mips still don't define it. The proper solution will be to have per-arch tables for these values to support cross-analysis. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signef-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18tun: fix vlan packet truncationBjørn Mork1-6/+1
Bogus trimming in tun_net_xmit() causes truncated vlan packets. skb->len is correct whether or not skb_vlan_tag_present() is true. There is no more reason to adjust the skb length on xmit in this driver than any other driver. tun_put_user() adds 4 bytes to the total for tagged packets because it transmits the tag inline to userspace. This is similar to a nic transmitting the tag inline on the wire. Reproducing the bug by sending any tagged packet through back-to-back connected tap interfaces: socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out & ip link add link in name in.20 type vlan id 20 ip addr add 10.9.9.9/24 dev in.20 ip link set in.20 up tshark -nxxi in -f arp -c1 2>/dev/null & tshark -nxxi out -f arp -c1 2>/dev/null & ping -c 1 10.9.9.5 >/dev/null 2>&1 The output from the 'in' and 'out' interfaces are different when the bug is present: Capturing on 'in' 0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7...... 0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7.. 0020 0a 09 09 09 00 00 00 00 00 00 0a 09 09 05 .............. Capturing on 'out' 0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7...... 0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7.. 0020 0a 09 09 09 00 00 00 00 00 00 .......... Fixes: aff3d70a07ff ("tun: allow to attach ebpf socket filter") Cc: Jason Wang <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-18tipc: fix infinite loop when dumping link monitor summaryTung Nguyen2-8/+5
When configuring the number of used bearers to MAX_BEARER and issuing command "tipc link monitor summary", the command enters infinite loop in user space. This issue happens because function tipc_nl_node_dump_monitor() returns the wrong 'prev_bearer' value when all potential monitors have been scanned. The correct behavior is to always try to scan all monitors until either the netlink message is full, in which case we return the bearer identity of the affected monitor, or we continue through the whole bearer array until we can return MAX_BEARERS. This solution also caters for the case where there may be gaps in the bearer array. Signed-off-by: Tung Nguyen <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-18tipc: fix use-after-free in tipc_nametbl_stopJon Maloy1-12/+17
When we delete a service item in tipc_nametbl_stop() we loop over all service ranges in the service's RB tree, and for each service range we loop over its pertaining publications while calling tipc_service_remove_publ() for each of them. However, tipc_service_remove_publ() has the side effect that it also removes the comprising service range item when there are no publications left. This leads to a "use-after-free" access when the inner loop continues to the next iteration, since the range item holding the list we are looping no longer exists. We fix this by moving the delete of the service range item outside the said function. Instead, we now let the two functions calling it test if the list is empty and perform the removal when that is the case. Reported-by: [email protected] Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19powerpc/xive: Fix trying to "push" an already active pool VPBenjamin Herrenschmidt1-0/+4
When setting up a CPU, we "push" (activate) a pool VP for it. However it's an error to do so if it already has an active pool VP. This happens when doing soft CPU hotplug on powernv since we don't tear down the CPU on unplug. The HW flags the error which gets captured by the diagnostics. Fix this by making sure to "pull" out any already active pool first. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: [email protected] # v4.12+ Signed-off-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-04-18btrfs: Fix wrong btrfs_delalloc_release_extents parameterQu Wenruo1-1/+1
Commit 43b18595d660 ("btrfs: qgroup: Use separate meta reservation type for delalloc") merged into mainline is not the latest version submitted to mail list in Dec 2017. It has a fatal wrong @qgroup_free parameter, which results increasing qgroup metadata pertrans reserved space, and causing a lot of early EDQUOT. Fix it by applying the correct diff on top of current branch. Fixes: 43b18595d660 ("btrfs: qgroup: Use separate meta reservation type for delalloc") Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-04-18btrfs: delayed-inode: Remove wrong qgroup meta reservation callsQu Wenruo1-4/+16
Commit 4f5427ccce5d ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item") merged into mainline was not latest version submitted to the mail list in Dec 2017. Which lacks the following fixes: 1) Remove btrfs_qgroup_convert_reserved_meta() call in btrfs_delayed_item_release_metadata() 2) Remove btrfs_qgroup_reserve_meta_prealloc() call in btrfs_delayed_inode_reserve_metadata() Those fixes will resolve unexpected EDQUOT problems. Fixes: 4f5427ccce5d ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item") Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-04-18btrfs: qgroup: Use independent and accurate per inode qgroup rsvQu Wenruo2-11/+65
Unlike reservation calculation used in inode rsv for metadata, qgroup doesn't really need to care about things like csum size or extent usage for the whole tree COW. Qgroups care more about net change of the extent usage. That's to say, if we're going to insert one file extent, it will mostly find its place in COWed tree block, leaving no change in extent usage. Or causing a leaf split, resulting in one new net extent and increasing qgroup number by nodesize. Or in an even more rare case, increase the tree level, increasing qgroup number by 2 * nodesize. So here instead of using the complicated calculation for extent allocator, which cares more about accuracy and no error, qgroup doesn't need that over-estimated reservation. This patch will maintain 2 new members in btrfs_block_rsv structure for qgroup, using much smaller calculation for qgroup rsv, reducing false EDQUOT. Signed-off-by: David Sterba <[email protected]> Signed-off-by: Qu Wenruo <[email protected]>
2018-04-18btrfs: qgroup: Commit transaction in advance to reduce early EDQUOTQu Wenruo5-2/+63
Unlike previous method that tries to commit transaction inside qgroup_reserve(), this time we will try to commit transaction using fs_info->transaction_kthread to avoid nested transaction and no need to worry about locking context. Since it's an asynchronous function call and we won't wait for transaction commit, unlike previous method, we must call it before we hit the qgroup limit. So this patch will use the ratio and size of qgroup meta_pertrans reservation as indicator to check if we should trigger a transaction commit. (meta_prealloc won't be cleaned in transaction committ, it's useless anyway) Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-04-18udf: Fix leak of UTF-16 surrogates into encoded stringsJan Kara1-0/+6
OSTA UDF specification does not mention whether the CS0 charset in case of two bytes per character encoding should be treated in UTF-16 or UCS-2. The sample code in the standard does not treat UTF-16 surrogates in any special way but on systems such as Windows which work in UTF-16 internally, filenames would be treated as being in UTF-16 effectively. In Linux it is more difficult to handle characters outside of Base Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte characters only. Just make sure we don't leak UTF-16 surrogates into the resulting string when loading names from the filesystem for now. CC: [email protected] # >= v4.6 Reported-by: Mingye Wang <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2018-04-18arm64: signal: don't force known signals to SIGKILLMark Rutland1-1/+1
Since commit: a7e6f1ca90354a31 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject") ... any signal which is not SIGKILL will be upgraded to a SIGKILL be force_signal_inject(). This includes signals we do expect, such as SIGILL triggered by do_undefinstr(). Fix the check to use a logical AND rather than a logical OR, permitting signals whose layout is SIL_FAULT. Fixes: a7e6f1ca90354a31 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject") Cc: Will Deacon <[email protected]> Reviewed-by: Dave Martin <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-04-18dt-bindings: thermal: Remove "cooling-{min|max}-level" propertiesViresh Kumar1-15/+1
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused bindings. Signed-off-by: Viresh Kumar <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2018-04-18dt-bindings: thermal: remove no longer needed samsung thermal propertiesBartlomiej Zolnierkiewicz1-18/+5
Remove documentation for longer needed samsung thermal properties. Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2018-04-18drm/i915: Fix LSPCON TMDS output buffer enabling from low-power stateImre Deak1-7/+32
LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: [email protected] Signed-off-by: Imre Deak <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-04-18drm/i915/audio: Fix audio detection issue on GLKGaurav K Singh1-1/+1
On Geminilake, sometimes audio card is not getting detected after reboot. This is a spurious issue happening on Geminilake. HW codec and HD audio controller link was going out of sync for which there was a fix in i915 driver but was not getting invoked for GLK. Extending this fix to GLK as well. Tested by Du,Wenkai on GLK board. Bspec: 21829 v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N) Cc: <[email protected]> # b651bd2a3ae3 ("drm/i915/audio: Fix audio enumeration issue on BXT") Cc: <[email protected]> Signed-off-by: Gaurav K Singh <[email protected]> Reviewed-by: Abhay Kumar <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8221229046e862977ae93ec9d34aa583fbd10397) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-04-18drm/i915: Call i915_perf_fini() on init_hw error unwindChris Wilson1-12/+15
We have to cleanup after i915_perf_init(), even on the error path, as it passes a pointer into the module to the sysfs core. If we fail to unregister the sysctl table, we leave a dangling pointer which then may explode anytime later. Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from device info") Signed-off-by: Chris Wilson <[email protected]> Cc: Lionel Landwerlin <[email protected]> Cc: Matthew Auld <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Reviewed-by: Michal Wajdeczko <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 9f172f6fbd243759c808d97bd83c95e49325b2c9) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-04-18drm/i915/bios: filter out invalid DDC pins from VBT child devicesJani Nikula1-4/+9
The VBT contains the DDC pin to use for specific ports. Alas, sometimes the field appears to contain bogus data, and while we check for it later on in intel_gmbus_get_adapter() we fail to check the returned NULL on errors. Oops results. The simplest approach seems to be to catch and ignore the bogus DDC pins already at the VBT parsing phase, reverting to fixed per port default pins. This doesn't guarantee display working, but at least it prevents the oops. And we continue to be fuzzed by VBT. One affected machine is Dell Latitude 5590 where a BIOS upgrade added invalid DDC pins. Typical backtrace: [ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)) [ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461450] Workqueue: events_unbound async_run_entry_fn [ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286 [ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960 [ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246 [ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000 [ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000 [ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461486] Call Trace: [ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915] [ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461521] drm_setup_crtcs+0x129/0xa6a [ 35.461523] ? __switch_to_asm+0x34/0x70 [ 35.461525] ? __switch_to_asm+0x34/0x70 [ 35.461527] ? __switch_to_asm+0x40/0x70 [ 35.461528] ? __switch_to_asm+0x34/0x70 [ 35.461529] ? __switch_to_asm+0x40/0x70 [ 35.461531] ? __switch_to_asm+0x34/0x70 [ 35.461532] ? __switch_to_asm+0x40/0x70 [ 35.461534] ? __switch_to_asm+0x34/0x70 [ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461538] ? __switch_to_asm+0x40/0x70 [ 35.461541] ? _cond_resched+0x10/0x33 [ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461560] async_run_entry_fn+0x2e/0xf5 [ 35.461563] process_one_work+0x15b/0x364 [ 35.461565] worker_thread+0x2c/0x3a0 [ 35.461567] ? process_one_work+0x364/0x364 [ 35.461568] kthread+0x10c/0x122 [ 35.461570] ? _kthread_create_on_node+0x5d/0x5d [ 35.461572] ret_from_fork+0x35/0x40 [ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00 [ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]--- [ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 35.461613] IP: i2c_transfer+0x4/0x86 [ 35.461614] PGD 0 P4D 0 [ 35.461616] Oops: 0000 [#1] SMP PTI [ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461628] Workqueue: events_unbound async_run_entry_fn [ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86 [ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246 [ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001 [ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000 [ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002 [ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07 [ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461649] Call Trace: [ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128 [ 35.461654] drm_get_edid+0xe5/0x38d [ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915] [ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461689] drm_setup_crtcs+0x129/0xa6a [ 35.461691] ? __switch_to_asm+0x34/0x70 [ 35.461693] ? __switch_to_asm+0x34/0x70 [ 35.461694] ? __switch_to_asm+0x40/0x70 [ 35.461696] ? __switch_to_asm+0x34/0x70 [ 35.461697] ? __switch_to_asm+0x40/0x70 [ 35.461698] ? __switch_to_asm+0x34/0x70 [ 35.461700] ? __switch_to_asm+0x40/0x70 [ 35.461701] ? __switch_to_asm+0x34/0x70 [ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461705] ? __switch_to_asm+0x40/0x70 [ 35.461707] ? _cond_resched+0x10/0x33 [ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461727] async_run_entry_fn+0x2e/0xf5 [ 35.461729] process_one_work+0x15b/0x364 [ 35.461731] worker_thread+0x2c/0x3a0 [ 35.461733] ? process_one_work+0x364/0x364 [ 35.461734] kthread+0x10c/0x122 [ 35.461736] ? _kthread_create_on_node+0x5d/0x5d [ 35.461738] ret_from_fork+0x35/0x40 [ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65 [ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30 [ 35.461757] CR2: 0000000000000010 [ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]--- Based on a patch by Fei Li. v2: s/reverting/sticking/ (Chris) Cc: [email protected] Cc: Fei Li <[email protected]> Co-developed-by: Fei Li <[email protected]> Reported-by: Pavel Nakonechnyi <[email protected]> Reported-and-tested-by: Seweryn Kokot <[email protected]> Reported-and-tested-by: Laszlo Valko <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961 Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f212bf9abe5de9f938fecea7df07046e74052dde) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-04-18drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6Tvrtko Ursulin1-10/+27
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests on some CI machines I have concluded that: a) the PMU readout of RC6 can race against runtime PM transitions, and b) there are other reasons than being runtime suspended which can cause intel_runtime_pm_get_if_in_use to fail. Therefore when estimating RC6 the code needs to assert we are indeed in suspended state, and if not, the best we can do is return the last known RC6 value. Without this check we can calculate the estimated value based on un- initialized or inappropriate internal state, which can result in over- estimation, or in any case incorrect value being returned. v2: * Re-arrange the code a bit to avoid second unlock and return branch. (Chris Wilson) v3: * Insert some strategic blank lines and improve commit msg. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <[email protected]> Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010 Cc: Tvrtko Ursulin <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Imre Deak <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2924bdee21edd6785a4df1b4d17fd3cb265fddd9) Signed-off-by: Joonas Lahtinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.