aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-17NFC: nci: fix sleep in atomic context bugs caused by nci_skb_allocDuoming Zhou2-3/+3
There are sleep in atomic context bugs when the request to secure element of st-nci is timeout. The root cause is that nci_skb_alloc with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is a timer handler. The call paths that could trigger bugs are shown below: (interrupt context 1) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_skb_alloc(..., GFP_KERNEL) //may sleep (interrupt context 2) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_send_data nci_queue_tx_data_frags nci_skb_alloc(..., GFP_KERNEL) //may sleep This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci") Signed-off-by: Duoming Zhou <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-17net/qla3xxx: Fix a test in ql_reset_work()Christophe JAILLET1-1/+2
test_bit() tests if one bit is set or not. Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit QL_RESET_START (i.e. 3) is set. In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say QL_ADAPTER_UP. This looks harmless, because this bit is likely be set, and when the ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set. This has been spotted by smatch. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-17Merge tag 'pci-v5.18-fixes-1' of ↵Linus Torvalds3-27/+38
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Avoid putting Elo i2 PCIe Ports in D3cold because downstream devices are inaccessible after going back to D0 (Rafael J. Wysocki) - Qualcomm SM8250 has a ddrss_sf_tbu clock but SC8180X does not; make a SC8180X-specific config without the clock so it probes correctly (Bjorn Andersson) - Revert aardvark chained IRQ handler rewrite because it broke interrupt affinity (Pali Rohár) * tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler" PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
2022-05-17Merge tag 'thermal-5.18-rc8' of ↵Linus Torvalds1-16/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Fix up a recent change in the int340x thermal driver that inadvertently broke thermal zone handling on some systems (Srinivas Pandruvada)" * tag 'thermal-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Mode setting with new OS handshake
2022-05-17selinux: fix bad cleanup on error in hashtab_duplicate()Ondrej Mosnacek1-1/+2
The code attempts to free the 'new' pointer using kmem_cache_free(), which is wrong because this function isn't responsible of freeing it. Instead, the function should free new->htable and clear the contents of *new (to prevent double-free). Cc: [email protected] Fixes: c7c556f1e81b ("selinux: refactor changing booleans") Reported-by: Wander Lairson Costa <[email protected]> Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2022-05-17audit,io_uring,io-wq: call __audit_uring_exit for dummy contextsJulian Orth2-1/+7
Not calling the function for dummy contexts will cause the context to not be reset. During the next syscall, this will cause an error in __audit_syscall_entry: WARN_ON(context->context != AUDIT_CTX_UNUSED); WARN_ON(context->name_count); if (context->context != AUDIT_CTX_UNUSED || context->name_count) { audit_panic("unrecoverable error in audit_syscall_entry()"); return; } These problematic dummy contexts are created via the following call chain: exit_to_user_mode_prepare -> arch_do_signal_or_restart -> get_signal -> task_work_run -> tctx_task_work -> io_req_task_submit -> io_issue_sqe -> audit_uring_entry Cc: [email protected] Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring") Signed-off-by: Julian Orth <[email protected]> [PM: subject line tweaks] Signed-off-by: Paul Moore <[email protected]>
2022-05-17io_uring: don't attempt to IOPOLL for MSG_RING requestsJens Axboe1-0/+3
We gate whether to IOPOLL for a request on whether the opcode is allowed on a ring setup for IOPOLL and if it's got a file assigned. MSG_RING is the only one that allows a file yet isn't pollable, it's merely supported to allow communication on an IOPOLL ring, not because we can poll for completion of it. Put the assigned file early and clear it, so we don't attempt to poll for it. Reported-by: [email protected] Fixes: 3f1d52abf098 ("io_uring: defer msg-ring file validity check until command issue") Signed-off-by: Jens Axboe <[email protected]>
2022-05-17ice: Fix interrupt moderation settings getting clearedMichal Wilczynski2-11/+16
Adaptive-rx and Adaptive-tx are interrupt moderation settings that can be enabled/disabled using ethtool: ethtool -C ethX adaptive-rx on/off adaptive-tx on/off Unfortunately those settings are getting cleared after changing number of queues, or in ethtool world 'channels': ethtool -L ethX rx 1 tx 1 Clearing was happening due to introduction of bit fields in ice_ring_container struct. This way only itr_setting bits were rebuilt during ice_vsi_rebuild_set_coalesce(). Introduce an anonymous struct of bitfields and create a union to refer to them as a single variable. This way variable can be easily saved and restored. Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild") Signed-off-by: Michal Wilczynski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17ice: fix possible under reporting of ethtool Tx and Rx statisticsPaul Greenwalt1-3/+4
The hardware statistics counters are not cleared during resets so the drivers first access is to initialize the baseline and then subsequent reads are for reporting the counters. The statistics counters are read during the watchdog subtask when the interface is up. If the baseline is not initialized before the interface is up, then there can be a brief window in which some traffic can be transmitted/received before the initial baseline reading takes place. Directly initialize ethtool statistics in driver open so the baseline will be initialized when the interface is up, and any dropped packets incremented before the interface is up won't be reported. Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init") Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17ice: fix crash when writing timestamp on RX ringsArkadiusz Kubalewski1-4/+15
Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Tested-by: Dave Cain <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()Zixuan Fu1-0/+4
In vmxnet3_rq_create(), when dma_alloc_coherent() fails, vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all() -> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls vmxnet3_force_close() -> dev_close() in error handling code. And the driver calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all() -> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(), rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing a NULL pointer dereference. To fix this possible bug, an if statement is added to check whether rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so. The error log in our fault-injection testing is shown as follows: [ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3] ... [ 65.227977] Call Trace: ... [ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3] [ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3] [ 65.228866] __dev_close_many+0x288/0x350 [ 65.229607] dev_close_many+0xa4/0x480 [ 65.231124] dev_close+0x138/0x230 [ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3] [ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3] ... Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Zixuan Fu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()Zixuan Fu1-0/+2
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is freed immediately. Similarly, in another branch, when dma_map_page() fails, rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf() returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all() -> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs. To fix these possible bugs, rbi->skb and rbi->page should be cleared after they are freed. The error log in our fault-injection testing is shown as follows: [ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150 ... [ 14.321586] Call Trace: ... [ 14.325357] consume_skb+0x2f/0x150 [ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3] [ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3] [ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.361675] Allocated by task 351: ... [ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0 [ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3] [ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.367309] [ 14.367412] Freed by task 351: ... [ 14.368932] __dev_kfree_skb_any+0xd2/0xe0 [ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3] [ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3] [ 14.370174] __dev_open+0x28a/0x420 [ 14.370399] __dev_change_flags+0x192/0x590 [ 14.370667] dev_change_flags+0x7a/0x180 [ 14.370919] do_setlink+0xb28/0x3570 [ 14.371150] rtnl_newlink+0x1160/0x1740 [ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50 [ 14.371661] netlink_rcv_skb+0x1cd/0x3e0 [ 14.371913] netlink_unicast+0x5dc/0x840 [ 14.372169] netlink_sendmsg+0x856/0xc40 [ 14.372420] ____sys_sendmsg+0x8a7/0x8d0 [ 14.372673] __sys_sendmsg+0x1c2/0x270 [ 14.372914] do_syscall_64+0x41/0x90 [ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae ... Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Zixuan Fu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdownXin Long1-1/+1
The global blackhole_netdev has replaced pernet loopback_dev to become the one given to the object that holds an netdev when ifdown in many places of ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"). Especially after commit faab39f63c1f ("net: allow out-of-order netdev unregistration"), it's no longer safe to use loopback_dev that may be freed before other netdev. This patch is to set dst dev to blackhole_netdev instead of loopback_dev in ifdown. v1->v2: - add Fixes tag as Eric suggested. Fixes: faab39f63c1f ("net: allow out-of-order netdev unregistration") Signed-off-by: Xin Long <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/e8c87482998ca6fcdab214f5a9d582899ec0c648.1652665047.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: systemport: Fix an error handling path in bcm_sysport_probe()Christophe JAILLET1-2/+4
if devm_clk_get_optional() fails, we still need to go through the error handling path. Add the missing goto. Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: lan966x: Fix assignment of the MAC addressHoratiu Vultur1-0/+28
The following two scenarios were failing for lan966x. 1. If the port had the address X and then trying to assign the same address, then the HW was just removing this address because first it tries to learn new address and then delete the old one. As they are the same the HW remove it. 2. If the port eth0 was assigned the same address as one of the other ports eth1 then when assigning back the address to eth0 then the HW was deleting the address of eth1. The case 1. is fixed by checking if the port has already the same address while case 2. is fixed by checking if the address is used by any other port. Fixes: e18aba8941b40b ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-16Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"Pali Rohár1-26/+22
This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e. This commit broke support for setting interrupt affinity. It looks like that it is related to the chained IRQ handler. Revert this commit until issue with setting interrupt affinity is fixed. Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-05-16ptp: ocp: have adjtime handle negative delta_ns correctlyJonathan Lemon1-2/+3
delta_ns is a s64, but it was being passed ptp_ocp_adjtime_coarse as an u64. Also, it turns out that timespec64_add_ns() only handles positive values, so perform the math with set_normalized_timespec(). Fixes: 90f8f4c0e3ce ("ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments") Suggested-by: Vadim Fedorenko <[email protected]> Signed-off-by: Jonathan Lemon <[email protected]> Acked-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-16netfilter: nft_flow_offload: fix offload with pppoe + vlanFelix Fietkau1-1/+2
When running a combination of PPPoE on top of a VLAN, we need to set info->outdev to the PPPoE device, otherwise PPPoE encap is skipped during software offload. Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16net: fix dev_fill_forward_path with pppoe + bridgeFelix Fietkau3-2/+3
When calling dev_fill_forward_path on a pppoe device, the provided destination address is invalid. In order for the bridge fdb lookup to succeed, the pppoe code needs to update ctx->daddr to the correct value. Fix this by storing the address inside struct net_device_path_ctx Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16netfilter: nft_flow_offload: skip dst neigh lookup for ppp devicesFelix Fietkau1-9/+13
The dst entry does not contain a valid hardware address, so skip the lookup in order to avoid running into errors here. The proper hardware address is filled in from nft_dev_path_info Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16netfilter: flowtable: fix excessive hw offload attempts after failureFelix Fietkau1-1/+3
If a flow cannot be offloaded, the code currently repeatedly tries again as quickly as possible, which can significantly increase system load. Fix this by limiting flow timeout update and hardware offload retry to once per second. Fixes: c07531c01d82 ("netfilter: flowtable: Remove redundant hw refresh bit") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16net/sched: act_pedit: sanitize shift argument before usagePaolo Abeni1-0/+4
syzbot was able to trigger an Out-of-Bound on the pedit action: UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43 shift exponent 1400735974 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x50 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322 tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238 tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367 tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432 tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956 tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe36e9e1b59 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The 'shift' field is not validated, and any value above 31 will trigger out-of-bounds. The issue predates the git history, but syzbot was able to trigger it only after the commit mentioned in the fixes tag, and this change only applies on top of such commit. Address the issue bounding the 'shift' value to the maximum allowed by the relevant operator. Reported-and-tested-by: [email protected] Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-16ALSA: usb-audio: Restore Rane SL-1 quirkTakashi Iwai1-0/+9
At cleaning up and moving the device rename from the quirk table to its own table, we removed the entry for Rane SL-1 as we thought it's only for renaming. It turned out, however, that the quirk is required for matching with the device that declares itself as no standard audio but only as vendor-specific. Restore the quirk entry for Rane SL-1 to fix the regression. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887 Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-05-16Merge tag 'linux-can-fixes-for-5.18-20220514' of ↵David S. Miller3-65/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-05-14 this is a pull request of 2 patches for net/master. Changes to linux-can-fixes-for-5.18-20220513: - adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"" (Thanks Jakub) Both patches are by Jarkko Nikula, target the m_can PCI driver bindings, and fix usage of wrong bit timing constants for the Elkhart Lake platform. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-05-16ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machineAndy Chi1-0/+1
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Andy Chi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-05-16xfrm: fix "disable_policy" flag use when arriving from different devicesEyal Birger3-6/+32
In IPv4 setting the "disable_policy" flag on a device means no policy should be enforced for traffic originating from the device. This was implemented by seting the DST_NOPOLICY flag in the dst based on the originating device. However, dsts are cached in nexthops regardless of the originating devices, in which case, the DST_NOPOLICY flag value may be incorrect. Consider the following setup: +------------------------------+ | ROUTER | +-------------+ | +-----------------+ | | ipsec src |----|-|ipsec0 | | +-------------+ | |disable_policy=0 | +----+ | | +-----------------+ |eth1|-|----- +-------------+ | +-----------------+ +----+ | | noipsec src |----|-|eth0 | | +-------------+ | |disable_policy=1 | | | +-----------------+ | +------------------------------+ Where ROUTER has a default route towards eth1. dst entries for traffic arriving from eth0 would have DST_NOPOLICY and would be cached and therefore can be reused by traffic originating from ipsec0, skipping policy check. Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead of the DST in IN/FWD IPv4 policy checks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Shmulik Ladkani <[email protected]> Signed-off-by: Eyal Birger <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2022-05-15Linux 5.18-rc7Linus Torvalds1-1/+1
2022-05-15Merge tag 'driver-core-5.18-rc7' of ↵Linus Torvalds2-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one fix, and three documentation updates for 5.18-rc7. The fix is for the firmware loader which resolves a long-reported problem where the credentials of the firmware loader could be set to a userspace process without enough permissions to actually load the firmware image. Many Android vendors have been reporting this for quite some time. The documentation updates are for the embargoed-hardware-issues.rst file to add a new entry, change an existing one, and sort the list to make changes easier in the future. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation/process: Update ARM contact for embargoed hardware issues Documentation/process: Add embargoed HW contact for Ampere Computing Documentation/process: Make groups alphabetical and use tabs consistently firmware_loader: use kernel credentials when reading firmware
2022-05-15Merge tag 'char-misc-5.18-rc7' of ↵Linus Torvalds2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two small driver fixes for 5.18-rc7 that resolve reported problems: - slimbus driver irq bugfix - interconnect sync state bugfix Both of these have been in linux-next with no reported problems" * tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom: Fix IRQ check in qcom_slim_probe interconnect: Restore sync state by ignoring ipa-virt in provider count
2022-05-15Merge tag 'tty-5.18-rc7' of ↵Linus Torvalds4-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that resolve reported problems. They include: - n_gsm fixes for reported issues - 8250_mtk driver fixes for some platforms - fsl_lpuart driver fix for reported problem. - digicolor driver fix for reported problem. All have been in linux-next for a while with no reported problems" * tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fsl_lpuart: Don't enable interrupts too early tty: n_gsm: fix invalid gsmtty_write_room() result tty: n_gsm: fix mux activation issues in gsm_config() tty: n_gsm: fix buffer over-read in gsm_dlci_data() serial: 8250_mtk: Fix register address for XON/XOFF character serial: 8250_mtk: Make sure to select the right FEATURE_SEL serial: 8250_mtk: Fix UART_EFR register address tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
2022-05-15Merge tag 'usb-5.18-rc7' of ↵Linus Torvalds13-75/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small fixes for reported issues with some USB drivers. They include: - xhci fixes for xhci-mtk platform driver - typec driver fixes for reported problems. - cdc-wdm read-stuck fix - gadget driver fix for reported race condition - new usb-serial driver ids All of these have been in linux-next with no reported problems" * tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: remove bandwidth budget table usb: xhci-mtk: fix fs isoc's transfer error usb: gadget: fix race when gadget driver register via ioctl usb: typec: tcpci_mt6360: Update for BMC PHY setting usb: gadget: uvc: allow for application to cleanly shutdown usb: typec: tcpci: Don't skip cleanup in .remove() on error usb: cdc-wdm: fix reading stuck on device close USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
2022-05-15Merge tag 'powerpc-5.18-5' of ↵Linus Torvalds1-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring. Thanks to: Alexander Graf, and Matt Evans. * tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
2022-05-15Merge tag 'x86-urgent-2022-05-15' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the handling of unpopulated sub-pmd spaces. The copy & pasta from the corresponding s390 code screwed up the address calculation for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to calculate the proper start address. It's a mystery why this code is not generic and shared because there is nothing architecture specific in there, but that's too intrusive for a backportable fix" * tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix marking of unused sub-pmd ranges
2022-05-15Merge tag 'sched-urgent-2022-05-15' of ↵Linus Torvalds9-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "The recent expansion of the sched switch tracepoint inserted a new argument in the middle of the arguments. This reordering broke BPF programs which relied on the old argument list. While tracepoints are not considered stable ABI, it's not trivial to make BPF cope with such a change, but it's being worked on. For now restore the original argument order and move the new argument to the end of the argument list" * tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/tracing: Append prev_state to tp args instead
2022-05-15Merge tag 'irq-urgent-2022-05-15' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for a recent (introduced in 5.16) regression in the core interrupt code. The consolidation of the interrupt handler invocation code added an unconditional warning when generic_handle_domain_irq() is invoked from outside hard interrupt context. That's overbroad as the requirement for invoking these handlers in hard interrupt context is only required for certain interrupt types. The subsequently called code already contains a warning which triggers conditionally for interrupt chips which indicate this requirement in their properties. Remove the overbroad one" * tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
2022-05-14can: m_can: remove support for custom bit timing, take #2Jarkko Nikula2-21/+6
Now when Intel Elkhart Lake uses again common bit timing and there are no other users for custom bit timing, we can bring back the changes done by the commit 0ddd83fbebbc ("can: m_can: remove support for custom bit timing"). This effectively reverts commit ea768b2ffec6 ("Revert "can: m_can: remove support for custom bit timing"") while taking into account commit ea22ba40debe ("can: m_can: make custom bittiming fields const") and commit 7d4a101c0bd3 ("can: dev: add sanity check in can_set_static_ctrlmode()"). Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Jarkko Nikula <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-05-14Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"Jarkko Nikula1-44/+4
This reverts commit 0e8ffdf3b86dfd44b651f91b12fcae76c25c453b. Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for Elkhart Lake") broke the test case using bitrate switching. | ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on | ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on | candump can0 & | cangen can1 -I 0x800 -L 64 -e -fb \ | -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v Above commit does everything correctly according to the datasheet. However datasheet wasn't correct. I got confirmation from hardware engineers that the actual CAN hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0. Datasheet was mirroring values from an another specification which was based on earlier M_CAN version leading to wrong bit timings. Therefore revert the commit and switch back to common bit timings. Fixes: ea4c1787685d ("can: m_can: pci: use custom bit timings for Elkhart Lake") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Jarkko Nikula <[email protected]> Reported-by: Chee Hou Ong <[email protected]> Reported-by: Aman Kumar <[email protected]> Reported-by: Pallavi Kumari <[email protected]> Cc: <[email protected]> # v5.16+ Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-05-14Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of ↵Linus Torvalds4-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix two NDEBUG warnings in 'perf bench numa' - Fix ARM coresight `perf test` failure - Sync linux/kvm.h with the kernel sources - Add James and Mike as Arm64 performance events reviewers * tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: MAINTAINERS: Add James and Mike as Arm64 performance events reviewers tools headers UAPI: Sync linux/kvm.h with the kernel sources perf tests: Fix coresight `perf test` failure. perf bench: Fix two numa NDEBUG warnings
2022-05-13net: macb: Increment rx bd head after allocating skb and bufferHarini Katakam1-1/+1
In gem_rx_refill rx_prepared_head is incremented at the beginning of the while loop preparing the skb and data buffers. If the skb or data buffer allocation fails, this BD will be unusable BDs until the head loops back to the same BD (and obviously buffer allocation succeeds). In the unlikely event that there's a string of allocation failures, there will be an equal number of unusable BDs and an inconsistent RX BD chain. Hence increment the head at the end of the while loop to be clean. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Harini Katakam <[email protected]> Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-13Merge branch 'mptcp-subflow-accounting-fix'Jakub Kicinski4-8/+71
Mat Martineau says: ==================== mptcp: Subflow accounting fix This series contains a bug fix affecting the in-kernel path manager (patch 1), where closing subflows would sometimes not adjust the PM's count of active subflows. Patch 2 updates the selftests to exercise the new code. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-13selftests: mptcp: add subflow limits test-casesPaolo Abeni1-2/+46
Add and delete a bunch of endpoints and verify the respect of configured limits. This covers the codepath introduced by the previous patch. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-13mptcp: fix subflow accounting on closePaolo Abeni3-6/+25
If the PM closes a fully established MPJ subflow or the subflow creation errors out in it's early stage the subflows counter is not bumped accordingly. This change adds the missing accounting, additionally taking care of updating accordingly the 'accept_subflow' flag. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-13Merge tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds15-40/+99
Pull more drm fixes from Dave Airlie: "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx ones also popped up later, but all seem like bad enough things to fix. The dma-buf, vc4 and nouveau ones are all pretty small. The fbdev fixes are a bit more complicated: a fix to cleanup fbdev devices properly, uncovered some use-after-free bugs in existing drivers. Then the fix for those bugs wasn't correct. This reverts that fix, and puts the proper fixes in place in the drivers to avoid the use-after-frees. This has had a fair number of eyes on it at this stage, and I'm confident enough that it puts things in the right place, and is less dangerous than reverting our way out of the initial change at this stage. fbdev: - revert NULL deref fix that turned into a use-after-free - prevent use-after-free in fbdev - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees dma-buf: - fix panic in stats setup vc4: - fix hdmi build nouveau: - tegra iommu present fix - fix leak in backlight name vmwgfx: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects" * tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Disable command buffers on svga3 without gbobjects drm/vmwgfx: Initialize drm_mode_fb_cmd2 drm/vmwgfx: Fix fencing on SVGAv3 drm/vc4: hdmi: Fix build error for implicit function declaration dma-buf: call dma_buf_stats_setup after dmabuf is in valid list fbdev: efifb: Fix a use-after-free due early fb_info cleanup drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() drm/nouveau/tegra: Stop using iommu_present() fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: Prevent possible use-after-free in fb_release() Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
2022-05-13block/mq-deadline: Set the fifo_time member also if inserting at headBart Van Assche1-0/+1
Before commit 322cff70d46c the fifo_time member of requests on a dispatch list was not used. Commit 322cff70d46c introduces code that reads the fifo_time member of requests on dispatch lists. Hence this patch that sets the fifo_time member when adding a request to a dispatch list. Cc: Christoph Hellwig <[email protected]> Cc: Ming Lei <[email protected]> Cc: Damien Le Moal <[email protected]> Fixes: 322cff70d46c ("block/mq-deadline: Prioritize high-priority requests") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-05-14Merge tag 'drm-misc-fixes-2022-05-13' of ↵Dave Airlie9-16/+38
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Multiple fixes to fbdev to address a regression at unregistration, an iommu detection improvement for nouveau, a memory leak fix for nouveau, pointer dereference fix for dma_buf_file_release(), and a build breakage fix for vc4 Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat
2022-05-14Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of ↵Dave Airlie6-24/+61
https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes vmwgfx fixes for: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects Signed-off-by: Dave Airlie <[email protected]> From: Zack Rusin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-05-13Merge tag 'gfs2-v5.18-rc4-fix3' of ↵Linus Torvalds2-82/+68
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "We've finally identified commit dc732906c245 ("gfs2: Introduce flag for glock holder auto-demotion") to be the other cause of the filesystem corruption we've been seeing. This feature isn't strictly necessary anymore, so we've decided to stop using it for now. With this and the gfs_iomap_end rounding fix you've already seen ("gfs2: Fix filesystem block deallocation for short writes" in this pull request), we're corruption free again now. - Fix filesystem block deallocation for short writes. - Stop using glock holder auto-demotion for now. - Get rid of buffered writes inefficiencies due to page faults being disabled. - Minor other cleanups" * tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Stop using glock holder auto-demotion for now gfs2: buffered write prefaulting gfs2: Align read and write chunks to the page cache gfs2: Pull return value test out of should_fault_in_pages gfs2: Clean up use of fault_in_iov_iter_{read,write}able gfs2: Variable rename gfs2: Fix filesystem block deallocation for short writes
2022-05-13gfs2: Stop using glock holder auto-demotion for nowAndreas Gruenbacher1-32/+14
We're having unresolved issues with the glock holder auto-demotion mechanism introduced in commit dc732906c245. This mechanism was assumed to be essential for avoiding frequent short reads and writes until commit 296abc0d91d8 ("gfs2: No short reads or writes upon glock contention"). Since then, when the inode glock is lost, it is simply re-acquired and the operation is resumed. This means that apart from the performance penalty, we might as well drop the inode glock before faulting in pages, and re-acquire it afterwards. Signed-off-by: Andreas Gruenbacher <[email protected]>
2022-05-13gfs2: buffered write prefaultingAndreas Gruenbacher1-12/+16
In gfs2_file_buffered_write, to increase the likelihood that all the user memory we're trying to write will be resident in memory, carry out the write in chunks and fault in each chunk of user memory before trying to write it. Otherwise, some workloads will trigger frequent short "internal" writes, causing filesystem blocks to be allocated and then partially deallocated again when writing into holes, which is wasteful and breaks reservations. Neither the chunked writes nor any of the short "internal" writes are user visible. Signed-off-by: Andreas Gruenbacher <[email protected]>
2022-05-13Merge tag 'scsi-fixes' of ↵Linus Torvalds4-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. These patches mosly fix error legs and exceptional conditions (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with lpfc features" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE scsi: lpfc: Fix split code for FLOGI on FCoE scsi: qla2xxx: Fix missed DMA unmap for aborted commands scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
Powered by cgit, Gruvboxed by Blaster4385.