aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-18dm integrity: flush the journal on suspendMikulas Patocka1-6/+1
This commit flushes the journal on suspend. It is prerequisite for the next commit that enables activating dm integrity devices in read-only mode. Note that we deliberately didn't flush the journal on suspend, so that the journal replay code would be tested. However, the dm-integrity code is 5 years old now, so that journal replay is well-tested, and we can make this change now. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-11-18dm bufio: Fix missing decrement of no_sleep_enabled if ↵Zhihao Cheng1-0/+2
dm_bufio_client_create failed The 'no_sleep_enabled' should be decreased in error handling path in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag is set, otherwise static_branch_unlikely() will always return true even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP flag set. Cc: [email protected] Fixes: 3c1c875d0586 ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP") Signed-off-by: Zhihao Cheng <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-11-18dm ioctl: fix misbehavior if list_versions races with module loadingMikulas Patocka1-2/+2
__list_versions will first estimate the required space using the "dm_target_iterate(list_version_get_needed, &needed)" call and then will fill the space using the "dm_target_iterate(list_version_get_info, &iter_info)" call. Each of these calls locks the targets using the "down_read(&_lock)" and "up_read(&_lock)" calls, however between the first and second "dm_target_iterate" there is no lock held and the target modules can be loaded at this point, so the second "dm_target_iterate" call may need more space than what was the first "dm_target_iterate" returned. The code tries to handle this overflow (see the beginning of list_version_get_info), however this handling is incorrect. The code sets "param->data_size = param->data_start + needed" and "iter_info.end = (char *)vers+len" - "needed" is the size returned by the first dm_target_iterate call; "len" is the size of the buffer allocated by userspace. "len" may be greater than "needed"; in this case, the code will write up to "len" bytes into the buffer, however param->data_size is set to "needed", so it may write data past the param->data_size value. The ioctl interface copies only up to param->data_size into userspace, thus part of the result will be truncated. Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this guarantees that the second "dm_target_iterate" call will write only up to the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it overflows the "needed" space - in this case, userspace will allocate a larger buffer and retry. Note that there is also a bug in list_version_get_needed - we need to add "strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-11-18Merge tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme into block-6.1Jens Axboe2-0/+6
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - memory leak fix in nvmet (Sagi Grimberg)" * tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme: nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
2022-11-189p/fd: Use P9_HDRSZ for header sizeGUO Zihua1-3/+3
Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7' Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: GUO Zihua <[email protected]> Reviewed-by: Christian Schoenebeck <[email protected]> [Dominique: commit message adjusted to make sense after offset size adjustment got removed] Signed-off-by: Dominique Martinet <[email protected]>
2022-11-189p/fd: Fix write overflow in p9_read_workGUO Zihua1-8/+8
This error was reported while fuzzing: BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0xd35/0x1190 Write of size 4043 at addr ffff888008724eb1 by task kworker/1:1/24 CPU: 1 PID: 24 Comm: kworker/1:1 Not tainted 6.1.0-rc5-00002-g1adf73218daa-dirty #223 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: events p9_read_work Call Trace: <TASK> dump_stack_lvl+0x4c/0x64 print_report+0x178/0x4b0 kasan_report+0xae/0x130 kasan_check_range+0x179/0x1e0 memcpy+0x38/0x60 _copy_to_iter+0xd35/0x1190 copy_page_to_iter+0x1d5/0xb00 pipe_read+0x3a1/0xd90 __kernel_read+0x2a5/0x760 kernel_read+0x47/0x60 p9_read_work+0x463/0x780 process_one_work+0x91d/0x1300 worker_thread+0x8c/0x1210 kthread+0x280/0x330 ret_from_fork+0x22/0x30 </TASK> Allocated by task 457: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7e/0x90 __kmalloc+0x59/0x140 p9_fcall_init.isra.11+0x5d/0x1c0 p9_tag_alloc+0x251/0x550 p9_client_prepare_req+0x162/0x350 p9_client_rpc+0x18d/0xa90 p9_client_create+0x670/0x14e0 v9fs_session_init+0x1fd/0x14f0 v9fs_mount+0xd7/0xaf0 legacy_get_tree+0xf3/0x1f0 vfs_get_tree+0x86/0x2c0 path_mount+0x885/0x1940 do_mount+0xec/0x100 __x64_sys_mount+0x1a0/0x1e0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd This BUG pops up when trying to reproduce https://syzkaller.appspot.com/bug?id=6c7cd46c7bdd0e86f95d26ec3153208ad186f9fa The callstack is different but the issue is valid and re-producable with the same re-producer in the link. The root cause of this issue is that we check the size of the message received against the msize of the client in p9_read_work. However, it turns out that capacity is no longer consistent with msize. Thus, the message size should be checked against sdata capacity. As the msize is non-consistant with the capacity of the tag and as we are now checking message size against capacity directly, there is no point checking message size against msize. So remove it. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Reported-by: [email protected] Fixes: 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers") Signed-off-by: GUO Zihua <[email protected]> Reviewed-by: Christian Schoenebeck <[email protected]> [Dominique: squash patches 1 & 2 and fix size including header part] Signed-off-by: Dominique Martinet <[email protected]>
2022-11-189p/fd: fix issue of list_del corruption in p9_fd_cancel()Zhengchao Shao1-0/+2
Syz reported the following issue: kernel BUG at lib/list_debug.c:53! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__list_del_entry_valid.cold+0x5c/0x72 Call Trace: <TASK> p9_fd_cancel+0xb1/0x270 p9_client_rpc+0x8ea/0xba0 p9_client_create+0x9c0/0xed0 v9fs_session_init+0x1e0/0x1620 v9fs_mount+0xba/0xb80 legacy_get_tree+0x103/0x200 vfs_get_tree+0x89/0x2d0 path_mount+0x4c0/0x1ac0 __x64_sys_mount+0x33b/0x430 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> The process is as follows: Thread A: Thread B: p9_poll_workfn() p9_client_create() ... ... p9_conn_cancel() p9_fd_cancel() list_del() ... ... list_del() //list_del corruption There is no lock protection when deleting list in p9_conn_cancel(). After deleting list in Thread A, thread B will delete the same list again. It will cause issue of list_del corruption. Setting req->status to REQ_STATUS_ERROR under lock prevents other cleanup paths from trying to manipulate req_list. The other thread can safely check req->status because it still holds a reference to req at this point. Link: https://lkml.kernel.org/r/[email protected] Fixes: 52f1c45dde91 ("9p: trans_fd/p9_conn_cancel: drop client lock earlier") Reported-by: [email protected] Signed-off-by: Zhengchao Shao <[email protected]> [Dominique: add description of the fix in commit message] Signed-off-by: Dominique Martinet <[email protected]>
2022-11-18spi: spi-imx: spi_imx_transfer_one(): check for DMA transfer firstMarc Kleine-Budde1-3/+7
The SPI framework checks for each transfer (with the struct spi_controller::can_dma callback) whether the driver wants to use DMA for the transfer. If the driver returns true, the SPI framework will map the transfer's data to the device, start the actual transfer and map the data back. In commit 07e759387788 ("spi: spi-imx: add PIO polling support") the spi-imx driver's spi_imx_transfer_one() function was extended. If the estimated duration of a transfer does not exceed a configurable duration, a polling transfer function is used. This check happens before checking if the driver decided earlier for a DMA transfer. If spi_imx_can_dma() decided to use a DMA transfer, and the user configured a big maximum polling duration, a polling transfer will be used. The DMA unmap after the transfer destroys the transferred data. To fix this problem check in spi_imx_transfer_one() if the driver decided for DMA transfer first, then check the limits for a polling transfer. Fixes: 07e759387788 ("spi: spi-imx: add PIO polling support") Link: https://lore.kernel.org/all/[email protected] Reported-by: Frieder Schrempf <[email protected]> Reported-by: Fabio Estevam <[email protected]> Tested-by: Fabio Estevam <[email protected]> Cc: David Jander <[email protected]> Cc: [email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Tested-by: Frieder Schrempf <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-18gpu: host1x: Avoid trying to use GART on Tegra20Robin Murphy2-0/+8
Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with bus") quite some time ago, the GART driver has effectively disabled itself to avoid issues with the GPU driver expecting it to work in ways that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") that bodge no longer works, but really the GPU driver should be responsible for its own behaviour anyway. Make the workaround explicit. Reported-by: Jon Hunter <[email protected]> Suggested-by: Dmitry Osipenko <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Tested-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2022-11-17tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'Zheng Yejian1-4/+5
Entries in list 'tr->err_log' will be reused after entry number exceed TRACING_LOG_ERRS_MAX. The cmd string of the to be reused entry will be freed first then allocated a new one. If the allocation failed, then the entry will still be in list 'tr->err_log' but its 'cmd' field is set to be NULL, later access of 'cmd' is risky. Currently above problem can cause the loss of 'cmd' information of first entry in 'tr->err_log'. When execute `cat /sys/kernel/tracing/error_log`, reproduce logs like: [ 37.495100] trace_kprobe: error: Maxactive is not for kprobe(null) ^ [ 38.412517] trace_kprobe: error: Maxactive is not for kprobe Command: p4:myprobe2 do_sys_openat2 ^ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Fixes: 1581a884b7ca ("tracing: Remove size restriction on tracing_log_err cmd strings") Signed-off-by: Zheng Yejian <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17tracing: Remove unused __bad_type_size() methodQiujun Huang1-2/+0
__bad_type_size() is unused after commit 04ae87a52074("ftrace: Rework event_create_dir()"). So, remove it. Link: https://lkml.kernel.org/r/[email protected] Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Qiujun Huang <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-18tracing/eprobe: Fix eprobe filter to make a filter correctlyMasami Hiramatsu (Google)1-1/+1
Since the eprobe filter was defined based on the eprobe's trace event itself, it doesn't work correctly. Use the original trace event of the eprobe when making the filter so that the filter works correctly. Without this fix: # echo 'e syscalls/sys_enter_openat \ flags_rename=$flags:u32 if flags < 1000' >> dynamic_events # echo 1 > events/eprobes/sys_enter_openat/enable [ 114.551550] event trace: Could not enable event sys_enter_openat -bash: echo: write error: Invalid argument With this fix: # echo 'e syscalls/sys_enter_openat \ flags_rename=$flags:u32 if flags < 1000' >> dynamic_events # echo 1 > events/eprobes/sys_enter_openat/enable # tail trace cat-241 [000] ...1. 266.498449: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0 cat-242 [000] ...1. 266.977640: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0 Link: https://lore.kernel.org/all/166823166395.1385292.8931770640212414483.stgit@devnote3/ Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support") Reported-by: Rafael Mendonca <[email protected]> Tested-by: Rafael Mendonca <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18tracing/eprobe: Fix warning in filter creationRafael Mendonca1-1/+1
The filter pointer (filterp) passed to create_filter() function must be a pointer that references a NULL pointer, otherwise, we get a warning when adding a filter option to the event probe: root@localhost:/sys/kernel/tracing# echo 'e:egroup/stat_runtime_4core sched/sched_stat_runtime \ runtime=$runtime:u32 if cpu < 4' >> dynamic_events [ 5034.340439] ------------[ cut here ]------------ [ 5034.341258] WARNING: CPU: 0 PID: 223 at kernel/trace/trace_events_filter.c:1939 create_filter+0x1db/0x250 [...] stripped [ 5034.345518] RIP: 0010:create_filter+0x1db/0x250 [...] stripped [ 5034.351604] Call Trace: [ 5034.351803] <TASK> [ 5034.351959] ? process_preds+0x1b40/0x1b40 [ 5034.352241] ? rcu_read_lock_bh_held+0xd0/0xd0 [ 5034.352604] ? kasan_set_track+0x29/0x40 [ 5034.352904] ? kasan_save_alloc_info+0x1f/0x30 [ 5034.353264] create_event_filter+0x38/0x50 [ 5034.353573] __trace_eprobe_create+0x16f4/0x1d20 [ 5034.353964] ? eprobe_dyn_event_release+0x360/0x360 [ 5034.354363] ? mark_held_locks+0xa6/0xf0 [ 5034.354684] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 5034.355105] ? trace_hardirqs_on+0x41/0x120 [ 5034.355417] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 5034.355751] ? __create_object+0x5b7/0xcf0 [ 5034.356027] ? lock_is_held_type+0xaf/0x120 [ 5034.356362] ? rcu_read_lock_bh_held+0xb0/0xd0 [ 5034.356716] ? rcu_read_lock_bh_held+0xd0/0xd0 [ 5034.357084] ? kasan_set_track+0x29/0x40 [ 5034.357411] ? kasan_save_alloc_info+0x1f/0x30 [ 5034.357715] ? __kasan_kmalloc+0xb8/0xc0 [ 5034.357985] ? write_comp_data+0x2f/0x90 [ 5034.358302] ? __sanitizer_cov_trace_pc+0x25/0x60 [ 5034.358691] ? argv_split+0x381/0x460 [ 5034.358949] ? write_comp_data+0x2f/0x90 [ 5034.359240] ? eprobe_dyn_event_release+0x360/0x360 [ 5034.359620] trace_probe_create+0xf6/0x110 [ 5034.359940] ? trace_probe_match_command_args+0x240/0x240 [ 5034.360376] eprobe_dyn_event_create+0x21/0x30 [ 5034.360709] create_dyn_event+0xf3/0x1a0 [ 5034.360983] trace_parse_run_command+0x1a9/0x2e0 [ 5034.361297] ? dyn_event_release+0x500/0x500 [ 5034.361591] dyn_event_write+0x39/0x50 [ 5034.361851] vfs_write+0x311/0xe50 [ 5034.362091] ? dyn_event_seq_next+0x40/0x40 [ 5034.362376] ? kernel_write+0x5b0/0x5b0 [ 5034.362637] ? write_comp_data+0x2f/0x90 [ 5034.362937] ? __sanitizer_cov_trace_pc+0x25/0x60 [ 5034.363258] ? ftrace_syscall_enter+0x544/0x840 [ 5034.363563] ? write_comp_data+0x2f/0x90 [ 5034.363837] ? __sanitizer_cov_trace_pc+0x25/0x60 [ 5034.364156] ? write_comp_data+0x2f/0x90 [ 5034.364468] ? write_comp_data+0x2f/0x90 [ 5034.364770] ksys_write+0x158/0x2a0 [ 5034.365022] ? __ia32_sys_read+0xc0/0xc0 [ 5034.365344] __x64_sys_write+0x7c/0xc0 [ 5034.365669] ? syscall_enter_from_user_mode+0x53/0x70 [ 5034.366084] do_syscall_64+0x60/0x90 [ 5034.366356] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 5034.366767] RIP: 0033:0x7ff0b43938f3 [...] stripped [ 5034.371892] </TASK> [ 5034.374720] ---[ end trace 0000000000000000 ]--- Link: https://lore.kernel.org/all/[email protected]/ Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support") Signed-off-by: Rafael Mendonca <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace caseLi Huafei1-1/+7
In __unregister_kprobe_top(), if the currently unregistered probe has post_handler but other child probes of the aggrprobe do not have post_handler, the post_handler of the aggrprobe is cleared. If this is a ftrace-based probe, there is a problem. In later calls to disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in __disarm_kprobe_ftrace() and may even cause use-after-free: Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2) WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0 Modules linked in: testKprobe_007(-) CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18 [...] Call Trace: <TASK> __disable_kprobe+0xcd/0xe0 __unregister_kprobe_top+0x12/0x150 ? mutex_lock+0xe/0x30 unregister_kprobes.part.23+0x31/0xa0 unregister_kprobe+0x32/0x40 __x64_sys_delete_module+0x15e/0x260 ? do_user_addr_fault+0x2cd/0x6b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] For the kprobe-on-ftrace case, we keep the post_handler setting to identify this aggrprobe armed with kprobe_ipmodify_ops. This way we can disarm it correctly. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 0bc11ed5ab60 ("kprobes: Allow kprobes coexist with livepatch") Reported-by: Zhao Gongyi <[email protected]> Suggested-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Li Huafei <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18rethook: fix a potential memleak in rethook_alloc()Yi Yang1-1/+3
In rethook_alloc(), the variable rh is not freed or passed out if handler is NULL, which could lead to a memleak, fix it. Link: https://lore.kernel.org/all/[email protected]/ [Masami: Add "rethook:" tag to the title.] Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook") Cc: [email protected] Signed-off-by: Yi Yang <[email protected]> Acke-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18tracing/eprobe: Fix memory leak of filter stringRafael Mendonca1-0/+1
The filter string doesn't get freed when a dynamic event is deleted. If a filter is set, then memory is leaked: root@localhost:/sys/kernel/tracing# echo 'e:egroup/stat_runtime_4core \ sched/sched_stat_runtime runtime=$runtime:u32 if cpu < 4' >> dynamic_events root@localhost:/sys/kernel/tracing# echo "-:egroup/stat_runtime_4core" >> dynamic_events root@localhost:/sys/kernel/tracing# echo scan > /sys/kernel/debug/kmemleak [ 224.416373] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) root@localhost:/sys/kernel/tracing# cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88810156f1b8 (size 8): comm "bash", pid 224, jiffies 4294935612 (age 55.800s) hex dump (first 8 bytes): 63 70 75 20 3c 20 34 00 cpu < 4. backtrace: [<000000009f880725>] __kmem_cache_alloc_node+0x18e/0x720 [<0000000042492946>] __kmalloc+0x57/0x240 [<0000000034ea7995>] __trace_eprobe_create+0x1214/0x1d30 [<00000000d70ef730>] trace_probe_create+0xf6/0x110 [<00000000915c7b16>] eprobe_dyn_event_create+0x21/0x30 [<000000000d894386>] create_dyn_event+0xf3/0x1a0 [<00000000e9af57d5>] trace_parse_run_command+0x1a9/0x2e0 [<0000000080777f18>] dyn_event_write+0x39/0x50 [<0000000089f0ec73>] vfs_write+0x311/0xe50 [<000000003da1bdda>] ksys_write+0x158/0x2a0 [<00000000bb1e616e>] __x64_sys_write+0x7c/0xc0 [<00000000e8aef1f7>] do_syscall_64+0x60/0x90 [<00000000fe7fe8ba>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Additionally, in __trace_eprobe_create() function, if an error occurs after the call to trace_eprobe_parse_filter(), which allocates the filter string, then memory is also leaked. That can be reproduced by creating the same event probe twice: root@localhost:/sys/kernel/tracing# echo 'e:egroup/stat_runtime_4core \ sched/sched_stat_runtime runtime=$runtime:u32 if cpu < 4' >> dynamic_events root@localhost:/sys/kernel/tracing# echo 'e:egroup/stat_runtime_4core \ sched/sched_stat_runtime runtime=$runtime:u32 if cpu < 4' >> dynamic_events -bash: echo: write error: File exists root@localhost:/sys/kernel/tracing# echo scan > /sys/kernel/debug/kmemleak [ 207.871584] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) root@localhost:/sys/kernel/tracing# cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881020d17a8 (size 8): comm "bash", pid 223, jiffies 4294938308 (age 31.000s) hex dump (first 8 bytes): 63 70 75 20 3c 20 34 00 cpu < 4. backtrace: [<000000000e4f5f31>] __kmem_cache_alloc_node+0x18e/0x720 [<0000000024f0534b>] __kmalloc+0x57/0x240 [<000000002930a28e>] __trace_eprobe_create+0x1214/0x1d30 [<0000000028387903>] trace_probe_create+0xf6/0x110 [<00000000a80d6a9f>] eprobe_dyn_event_create+0x21/0x30 [<000000007168698c>] create_dyn_event+0xf3/0x1a0 [<00000000f036bf6a>] trace_parse_run_command+0x1a9/0x2e0 [<00000000014bde8b>] dyn_event_write+0x39/0x50 [<0000000078a097f7>] vfs_write+0x311/0xe50 [<00000000996cb208>] ksys_write+0x158/0x2a0 [<00000000a3c2acb0>] __x64_sys_write+0x7c/0xc0 [<0000000006b5d698>] do_syscall_64+0x60/0x90 [<00000000780e8ecf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix both issues by releasing the filter string in trace_event_probe_cleanup(). Link: https://lore.kernel.org/all/[email protected]/ Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support") Signed-off-by: Rafael Mendonca <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18tracing: kprobe: Fix potential null-ptr-deref on trace_array in ↵Shang XiaoJing1-0/+4
kprobe_event_gen_test_exit() When test_gen_kprobe_cmd() failed after kprobe_event_gen_cmd_end(), it will goto delete, which will call kprobe_event_delete() and release the corresponding resource. However, the trace_array in gen_kretprobe_test will point to the invalid resource. Set gen_kretprobe_test to NULL after called kprobe_event_delete() to prevent null-ptr-deref. BUG: kernel NULL pointer dereference, address: 0000000000000070 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 246 Comm: modprobe Tainted: G W 6.1.0-rc1-00174-g9522dc5c87da-dirty #248 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:__ftrace_set_clr_event_nolock+0x53/0x1b0 Code: e8 82 26 fc ff 49 8b 1e c7 44 24 0c ea ff ff ff 49 39 de 0f 84 3c 01 00 00 c7 44 24 18 00 00 00 00 e8 61 26 fc ff 48 8b 6b 10 <44> 8b 65 70 4c 8b 6d 18 41 f7 c4 00 02 00 00 75 2f RSP: 0018:ffffc9000159fe00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810971d268 RCX: 0000000000000000 RDX: ffff8881080be600 RSI: ffffffff811b48ff RDI: ffff88810971d058 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc9000159fe58 R11: 0000000000000001 R12: ffffffffa0001064 R13: ffffffffa000106c R14: ffff88810971d238 R15: 0000000000000000 FS: 00007f89eeff6540(0000) GS:ffff88813b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000010599e004 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __ftrace_set_clr_event+0x3e/0x60 trace_array_set_clr_event+0x35/0x50 ? 0xffffffffa0000000 kprobe_event_gen_test_exit+0xcd/0x10b [kprobe_event_gen_test] __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f89eeb061b7 Link: https://lore.kernel.org/all/[email protected]/ Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module") Signed-off-by: Shang XiaoJing <[email protected]> Cc: [email protected] Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in ↵Shang XiaoJing1-16/+28
kprobe_event_gen_test_exit() When trace_get_event_file() failed, gen_kretprobe_test will be assigned as the error code. If module kprobe_event_gen_test is removed now, the null pointer dereference will happen in kprobe_event_gen_test_exit(). Check if gen_kprobe_test or gen_kretprobe_test is error code or NULL before dereference them. BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2210 Comm: modprobe Not tainted 6.1.0-rc1-00171-g2159299a3b74-dirty #217 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:kprobe_event_gen_test_exit+0x1c/0xb5 [kprobe_event_gen_test] Code: Unable to access opcode bytes at 0xffffffff9ffffff2. RSP: 0018:ffffc900015bfeb8 EFLAGS: 00010246 RAX: ffffffffffffffea RBX: ffffffffa0002080 RCX: 0000000000000000 RDX: ffffffffa0001054 RSI: ffffffffa0001064 RDI: ffffffffdfc6349c RBP: ffffffffa0000000 R08: 0000000000000004 R09: 00000000001e95c0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000800 R13: ffffffffa0002420 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f56b75be540(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff9ffffff2 CR3: 000000010874a006 CR4: 0000000000330ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lore.kernel.org/all/[email protected]/ Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module") Signed-off-by: Shang XiaoJing <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Cc: [email protected] Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2022-11-18Merge tag 'amd-drm-fixes-6.1-2022-11-16' of ↵Dave Airlie26-69/+235
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-16: amdgpu: - Fix a possible memory leak in ganng submit error path - DP tunneling fixes - DCN 3.1 page flip fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - Don't expose degamma on hardware that doesn't support it - BACO fixes for SMU 11.x - BACO fixes for SMU 13.x - Virtual display fix for devices with no display hardware amdkfd: - Memory limit regression fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-11-18Merge tag 'drm-intel-fixes-2022-11-17' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix uaf with lmem_userfault_list handling (Matthew Auld) Signed-off-by: Dave Airlie <[email protected]> From: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/Y3X2bNJ/4GR1BAiG@tursulin-desk
2022-11-17tracing: Fix wild-memory-access in register_synth_event()Shang XiaoJing1-3/+2
In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event __unregister_trace_event (second call) Fix the bug by avoiding to call the second __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP: 0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lkml.kernel.org/r/[email protected] Fixes: 4b147936fa50 ("tracing: Add support for 'synthetic' events") Signed-off-by: Shang XiaoJing <[email protected]> Cc: [email protected] Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()Shang XiaoJing1-10/+6
test_gen_synth_cmd() only free buf in fail path, hence buf will leak when there is no failure. Add kfree(buf) to prevent the memleak. The same reason and solution in test_empty_synth_event(). unreferenced object 0xffff8881127de000 (size 2048): comm "modprobe", pid 247, jiffies 4294972316 (age 78.756s) hex dump (first 32 bytes): 20 67 65 6e 5f 73 79 6e 74 68 5f 74 65 73 74 20 gen_synth_test 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 64 5f pid_t next_pid_ backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<0000000039eb1cf5>] 0xffffffffa00083cd [<000000000e8c3bc8>] 0xffffffffa00086ba [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd unreferenced object 0xffff8881127df000 (size 2048): comm "modprobe", pid 247, jiffies 4294972324 (age 78.728s) hex dump (first 32 bytes): 20 65 6d 70 74 79 5f 73 79 6e 74 68 5f 74 65 73 empty_synth_tes 74 20 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 t pid_t next_pi backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<00000000d4db9a3d>] 0xffffffffa0008071 [<00000000c31354a5>] 0xffffffffa00086ce [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: [email protected] Fixes: 9fe41efaca08 ("tracing: Add synth event generation test module") Signed-off-by: Shang XiaoJing <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17ftrace: Fix null pointer dereference in ftrace_add_mod()Xiu Jianfeng1-0/+1
The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 673feb9d76ab ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by: Xiu Jianfeng <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17ring_buffer: Do not deactivate non-existant pagesDaniil Tatianin1-2/+2
rb_head_page_deactivate() expects cpu_buffer to contain a valid list of ->pages, so verify that the list is actually present before calling it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 77ae365eca895 ("ring-buffer: make lockless") Signed-off-by: Daniil Tatianin <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17Merge tag 'soc-fixes-6.1-3' of ↵Linus Torvalds22-51/+171
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of devicetree and code changes for SoC platforms, notably: - DT schema warning fixes for i.MX - Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP - MAINTAINERS updates for Hisilicon and RISC-V, documenting which RISC-V SoC specific patches will now get merged through the SoC tree in the future. - A code fix for at91 suspend, to work around broken hardware - A devicetree fix for lan966x/pcb8291 LED support - Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems like incorrect register sizes and schema warnings. One fix makes the UFS controller work on sc8280xp, and six fixes address the same regulator problem in a variety of platforms" * tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) MAINTAINERS: repair Microchip corei2c driver entry MAINTAINERS: add an entry for StarFive devicetrees MAINTAINERS: generify the Microchip RISC-V entry name MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees MAINTAINERS: git://github.com -> https://github.com for HiSilicon soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR ARM: at91: pm: avoid soft resetting AC DLL ARM: dts: lan966x: Enable sgpio on pcb8291 arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state ARM: dts: at91: sama7g5: fix signal name of pin PB2 arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280 arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers ...
2022-11-17Merge tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-clientLinus Torvalds4-41/+18
Pull ceph fixes from Ilya Dryomov: "Three filesystem bug fixes, intended for stable" * tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-client: ceph: fix NULL pointer dereference for req->r_session ceph: avoid putting the realm twice when decoding snaps fails ceph: fix a NULL vs IS_ERR() check when calling ceph_lookup_inode() MAINTAINERS: git://github.com -> https://github.com for ceph
2022-11-18Merge tag 'drm-misc-fixes-2022-11-17' of ↵Dave Airlie9-44/+64
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1-rc6: - Fix error handling in vc4_atomic_commit_tail() - Set bpc for logictechno panels. - Fix potential memory leak in drm_dev_init() - Fix potential null-ptr-deref in drm_vblank_destroy_worker() - Set lima's clkname corrrectly when regulator is missing. - Small amdgpu fix to gang submission. - Revert hiding unregistered connectors from userspace, as it breaks on DP-MST. - Add workaround for DP++ dual mode adaptors that don't support i2c subaddressing. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-11-17Merge tag 'usb-serial-6.1-rc6' of ↵Greg Kroah-Hartman1-2/+17
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.1-rc6 Here are some new modem device ids for 6.1. All have been in linux-next with no reported issues." * tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: remove old LARA-R6 PID USB: serial: option: add Fibocom FM160 0x0111 composition USB: serial: option: add Sierra Wireless EM9191
2022-11-17ftrace: Optimize the allocation for mcount entriesWang Wensheng1-1/+1
If we can't allocate this size, try something smaller with half of the size. Its order should be decreased by one instead of divided by two. Link: https://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Cc: <[email protected]> Cc: [email protected] Fixes: a79008755497d ("ftrace: Allocate the mcount record pages as groups") Signed-off-by: Wang Wensheng <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17ftrace: Fix the possible incorrect kernel messageWang Wensheng1-1/+1
If the number of mcount entries is an integer multiple of ENTRIES_PER_PAGE, the page count showing on the console would be wrong. Link: https://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Cc: <[email protected]> Cc: [email protected] Fixes: 5821e1b74f0d0 ("function tracing: fix wrong pos computing when read buffer has been fulfilled") Signed-off-by: Wang Wensheng <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-17MAINTAINERS: Include PCI bindings in host bridge entryRob Herring1-0/+1
Almost all PCI bindings are controller bindings, so list them under the PCI native host bridge and endpoint entry. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Lorenzo Pieralisi <[email protected]>
2022-11-17io_uring: fix multishot recv request leaksPavel Begunkov1-9/+7
Having REQ_F_POLLED set doesn't guarantee that the request is executed as a multishot from the polling path. Fortunately for us, if the code thinks it's multishot issue when it's not, it can only ask to skip completion so leaking the request. Use issue_flags to mark multipoll issues. Cc: [email protected] Fixes: 1300ebb20286b ("io_uring: multishot recv") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/37762040ba9c52b81b92a2f5ebfd4ee484088951.1668710222.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-11-17io_uring: fix multishot accept request leaksPavel Begunkov4-8/+8
Having REQ_F_POLLED set doesn't guarantee that the request is executed as a multishot from the polling path. Fortunately for us, if the code thinks it's multishot issue when it's not, it can only ask to skip completion so leaking the request. Use issue_flags to mark multipoll issues. Cc: [email protected] Fixes: 390ed29b5e425 ("io_uring: add IORING_ACCEPT_MULTISHOT for accept") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-11-17io_uring: fix tw losing poll eventsPavel Begunkov1-0/+7
We may never try to process a poll wake and its mask if there was multiple wake ups racing for queueing up a tw. Force io_poll_check_events() to update the mask by vfs_poll(). Cc: [email protected] Fixes: aa43477b04025 ("io_uring: poll rework") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/00344d60f8b18907171178d7cf598de71d127b0b.1668710222.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-11-17io_uring: update res mask in io_poll_check_eventsPavel Begunkov1-0/+3
When io_poll_check_events() collides with someone attempting to queue a task work, it'll spin for one more time. However, it'll continue to use the mask from the first iteration instead of updating it. For example, if the first wake up was a EPOLLIN and the second EPOLLOUT, the userspace will not get EPOLLOUT in time. Clear the mask for all subsequent iterations to force vfs_poll(). Cc: [email protected] Fixes: aa43477b04025 ("io_uring: poll rework") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/2dac97e8f691231049cb259c4ae57e79e40b537c.1668710222.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-11-17scsi: iscsi: Fix possible memory leak when device_register() failedZhou Guanghui1-15/+16
If device_register() returns error, the name allocated by the dev_set_name() need be freed. As described in the comment of device_register(), we should use put_device() to give up the reference in the error path. Fix this by calling put_device(), the name will be freed in the kobject_cleanup(), and this patch modified resources will be released by calling the corresponding callback function in the device_release(). Signed-off-by: Zhou Guanghui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-11-17scsi: zfcp: Fix double free of FSF request when qdio send failsBenjamin Block1-1/+1
We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] [<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp] [<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp] [<00000003cb5eece8>] kthread+0x138/0x150 [<00000003cb557f3c>] __ret_from_fork+0x3c/0x60 [<00000003cc4172ea>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000003cc3e9d04>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. AS:0000000063b10007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded Hardware name: ... Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8 0000000000000000 0000000000000055 0000000000000000 00000000a8515800 0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c 000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48 Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8 000003ff7febaf82: e32020000004 lg %r2,0(%r2) #000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8 >000003ff7febaf8e: e3b020100020 cg %r11,16(%r2) 000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82 000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8 000003ff7febaf9e: e31020080004 lg %r1,8(%r2) 000003ff7febafa4: e33020000004 lg %r3,0(%r2) Call Trace: [<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp] [<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp] [<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp] [<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128 [<000000006292f300>] __do_softirq+0x130/0x3c0 [<0000000061d906c6>] irq_exit_rcu+0xfe/0x118 [<000000006291e818>] do_io_irq+0xc8/0x168 [<000000006292d516>] io_int_handler+0xd6/0x110 [<000000006292d596>] psw_idle_exit+0x0/0xa ([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0) [<000000006292ceea>] default_idle_call+0x52/0xf8 [<0000000061de4fa4>] do_idle+0xd4/0x168 [<0000000061de51fe>] cpu_startup_entry+0x36/0x40 [<0000000061d4faac>] smp_start_secondary+0x12c/0x138 [<000000006292d88e>] restart_int_handler+0x6e/0x90 Last Breaking-Event-Address: [<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803 Fault in home space mode while using kernel ASCE. AS:0000000077c40007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded Hardware name: ... Workqueue: kblockd blk_mq_run_work_fn Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20 0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20 00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6 00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0 Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa 0000000076fc0308: b904001b lgr %r1,%r11 #0000000076fc030c: e3106020001a algf %r1,32(%r6) >0000000076fc0312: e31010000082 xg %r1,0(%r1) 0000000076fc0318: b9040001 lgr %r0,%r1 0000000076fc031c: e30061700082 xg %r0,368(%r6) 0000000076fc0322: ec59000100d9 aghik %r5,%r9,1 0000000076fc0328: e34003b80004 lg %r4,952 Call Trace: [<0000000076fc0312>] __kmalloc+0xd2/0x398 [<0000000076f318f2>] mempool_alloc+0x72/0x1f8 [<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp] [<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp] [<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp] [<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod] [<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208 [<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8 [<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod] [<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818 [<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0 [<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218 [<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90 [<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0 [<0000000076da6d74>] process_one_work+0x274/0x4d0 [<0000000076da7018>] worker_thread+0x48/0x560 [<0000000076daef18>] kthread+0x140/0x160 [<000000007751d144>] ret_from_fork+0x28/0x30 Last Breaking-Event-Address: [<0000000076fc0474>] __kmalloc+0x234/0x398 Kernel panic - not syncing: Fatal exception: panic_on_oops To fix this, simply change the type of the cache variable to 'unsigned long', like the rest of zfcp and also the argument for 'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension and so can successfully remove the request from the hash table. Fixes: e60a6d69f1f8 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe") Cc: <[email protected]> #v2.6.34+ Signed-off-by: Benjamin Block <[email protected]> Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-11-17scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()Yuan Can1-1/+5
If device_register() fails in sdebug_add_host_helper(), it will goto clean and sdbg_host will be freed, but sdbg_host->host_list will not be removed from sdebug_host_list, then list traversal may cause UAF. Fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yuan Can <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Douglas Gilbert <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-11-17scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()Yang Yingliang1-1/+2
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case. Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-11-17scsi: mpi3mr: Suppress command reply debug printsShin'ichiro Kawasaki1-1/+2
After it receives command reply, mpi3mr driver checks command result. If the result is not zero, it prints out command information. This debug information is confusing since they are printed even when the non-zero result is expected. "Power-on or device reset occurred" is printed for Test Unit Ready command at drive detection. Inquiry failure for unsupported VPD page header is also printed. They are harmless but look like failures. To avoid the confusion, print the command reply debug information only when the module parameter logging_level has value MPI3_DEBUG_SCSI_ERROR= 64, in same manner as mpt3sas driver. Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-11-17Merge tag 'nfsd-6.1-5' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix another tracepoint crash * tag 'nfsd-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix trace_nfsd_fh_verify_err() crasher
2022-11-17Merge tag 'net-6.1-rc6' of ↵Linus Torvalds59-311/+477
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Current release - regressions: - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init() Previous releases - regressions: - bridge: fix memory leaks when changing VLAN protocol - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims - dsa: don't leak tagger-owned storage on switch driver unbind - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6 is removed - eth: stmmac: ensure tx function is not running in stmmac_xdp_release() - eth: hns3: fix return value check bug of rx copybreak Previous releases - always broken: - kcm: close race conditions on sk_receive_queue - bpf: fix alignment problem in bpf_prog_test_run_skb() - bpf: fix writing offset in case of fault in strncpy_from_kernel_nofault - eth: macvlan: use built-in RCU list checking - eth: marvell: add sleep time after enabling the loopback bit - eth: octeon_ep: fix potential memory leak in octep_device_setup() Misc: - tcp: configurable source port perturb table size - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)" * tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: use struct_group to copy ip/ipv6 header addresses net: usb: smsc95xx: fix external PHY reset net: usb: qmi_wwan: add Telit 0x103a composition netdevsim: Fix memory leak of nsim_dev->fa_cookie tcp: configurable source port perturb table size l2tp: Serialize access to sk_user_data with sk_callback_lock net: thunderbolt: Fix error handling in tbnet_init() net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() net: dsa: don't leak tagger-owned storage on switch driver unbind net/x25: Fix skb leak in x25_lapb_receive_frame() net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() bridge: switchdev: Fix memory leaks when changing VLAN protocol net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process net: hns3: fix return value check bug of rx copybreak net: hns3: fix incorrect hw rss hash type of rx packet net: phy: marvell: add sleep time after enabling the loopback bit net: ena: Fix error handling in ena_init() kcm: close race conditions on sk_receive_queue net: ionic: Fix error handling in ionic_init_module() ...
2022-11-17spi: tegra210-quad: Fix duplicate resource errorKrishna Yarlagadda1-1/+2
controller data alloc is done with client device data causing duplicate resource error. Allocate memory using controller device when using devm Fixes: f89d2cc3967a ("spi: tegra210-quad: use devm call for cdata memory") Signed-off-by: Krishna Yarlagadda <[email protected]> Reviewed-by: Jon Hunter <[email protected]> Tested-by: Jon Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-17net: use struct_group to copy ip/ipv6 header addressesHangbin Liu4-6/+10
kernel test robot reported warnings when build bonding module with make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/: from ../drivers/net/bonding/bond_main.c:35: In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is because we try to copy the whole ip/ip6 address to the flow_key, while we only point the to ip/ip6 saddr. Note that since these are UAPI headers, __struct_group() is used to avoid the compiler warnings. Reported-by: kernel test robot <[email protected]> Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici1-4/+42
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau1-0/+1
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <[email protected]> Acked-by: Bjørn Mork <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-17kbuild: Restore .version auto-increment behaviour for Debian packagesMarc Zyngier1-1/+1
Since 2df8220cc511 ("kbuild: build init/built-in.a just once"), generating Debian packages using 'make bindeb-pkg' results in packages that are stuck to the same .version, leading to unexpected behaviours (multiple packages with the same version). That's because the mkdebian script samples the build version before building the kernel, and forces the use of that version number for the actual build. Restore the previous behaviour by calling init/build-version instead of reading the .version file. This is likely to result in too many .version bumps, but this is what was happening before (although the bump was affecting builds made after the current one). Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once") Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2022-11-16tracing: Fix warning on variable 'struct trace_array'Aashish Sharma1-2/+2
Move the declaration of 'struct trace_array' out of #ifdef CONFIG_TRACING block, to fix the following warning when CONFIG_TRACING is not set: >> include/linux/trace.h:63:45: warning: 'struct trace_array' declared inside parameter list will not be visible outside of this definition or declaration Link: https://lkml.kernel.org/r/[email protected] Fixes: 1a77dd1c2bb5 ("scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled") Cc: "Martin K. Petersen" <[email protected]> Cc: Arun Easi <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Aashish Sharma <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-16tracing: Fix memory leak in tracing_read_pipe()Wang Yufen1-0/+1
kmemleak reports this issue: unreferenced object 0xffff888105a18900 (size 128): comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s) hex dump (first 32 bytes): 25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X. 03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140 [<000000006af00822>] krealloc+0x8d/0xf0 [<00000000c309be6a>] trace_iter_expand_format+0x99/0x150 [<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0 [<0000000065629d9d>] trace_event_printf+0xb6/0xf0 [<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0 [<00000000d22db172>] print_trace_line+0x73c/0x1480 [<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0 [<0000000015b58459>] vfs_read+0x17b/0x7c0 [<000000004aeee8ed>] ksys_read+0xed/0x1c0 [<0000000063d3d898>] do_syscall_64+0x3b/0x90 [<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd iter->fmt alloced in tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not freed, to fix, add free in tracing_release_pipe() Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: efbbdaa22bb7 ("tracing: Show real address for trace event arguments") Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-11-16ring-buffer: Include dropped pages in counting dirty patchesSteven Rostedt (Google)1-0/+12
The function ring_buffer_nr_dirty_pages() was created to find out how many pages are filled in the ring buffer. There's two running counters. One is incremented whenever a new page is touched (pages_touched) and the other is whenever a page is read (pages_read). The dirty count is the number touched minus the number read. This is used to determine if a blocked task should be woken up if the percentage of the ring buffer it is waiting for is hit. The problem is that it does not take into account dropped pages (when the new writes overwrite pages that were not read). And then the dirty pages will always be greater than the percentage. This makes the "buffer_percent" file inaccurate, as the number of dirty pages end up always being larger than the percentage, event when it's not and this causes user space to be woken up more than it wants to be. Add a new counter to keep track of lost pages, and include that in the accounting of dirty pages so that it is actually accurate. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader") Signed-off-by: Steven Rostedt (Google) <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.