aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-14wifi: cfg80211: fix certs build to not depend on file orderJohannes Berg1-1/+1
The file for the new certificate (Chen-Yu Tsai's) didn't end with a comma, so depending on the file order in the build rule, we'd end up with invalid C when concatenating the (now two) certificates. Fix that. Cc: [email protected] Reported-by: Biju Das <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate") Signed-off-by: Johannes Berg <[email protected]>
2023-12-13Merge branch '40GbE' of ↵Jakub Kicinski5-74/+219
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-12 (iavf) This series contains updates to iavf driver only. Piotr reworks Flow Director states to deal with issues in restoring filters. Slawomir fixes shutdown processing as it was missing needed calls. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close iavf: Handle ntuple on/off based on new state machines for flow director iavf: Introduce new state machines for flow director ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13tracing: Fix uaf issue when open the hist or hist_debug fileZheng Yejian3-4/+15
KASAN report following issue. The root cause is when opening 'hist' file of an instance and accessing 'trace_event_file' in hist_show(), but 'trace_event_file' has been freed due to the instance being removed. 'hist_debug' file has the same problem. To fix it, call tracing_{open,release}_file_tr() in file_operations callback to have the ref count and avoid 'trace_event_file' being freed. BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278 Read of size 8 at addr ffff242541e336b8 by task head/190 CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x1c/0x30 dump_stack_lvl+0x44/0x58 print_report+0xf0/0x5a0 kasan_report+0x80/0xc0 __asan_report_load8_noabort+0x1c/0x28 hist_show+0x11e0/0x1278 seq_read_iter+0x344/0xd78 seq_read+0x128/0x1c0 vfs_read+0x198/0x6c8 ksys_read+0xf4/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Allocated by task 188: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_alloc_info+0x20/0x30 __kasan_slab_alloc+0x6c/0x80 kmem_cache_alloc+0x15c/0x4a8 trace_create_new_event+0x84/0x348 __trace_add_new_event+0x18/0x88 event_trace_add_tracer+0xc4/0x1a0 trace_array_create_dir+0x6c/0x100 trace_array_create+0x2e8/0x568 instance_mkdir+0x48/0x80 tracefs_syscall_mkdir+0x90/0xe8 vfs_mkdir+0x3c4/0x610 do_mkdirat+0x144/0x200 __arm64_sys_mkdirat+0x8c/0xc0 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Freed by task 191: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_free_info+0x34/0x58 __kasan_slab_free+0xe4/0x158 kmem_cache_free+0x19c/0x508 event_file_put+0xa0/0x120 remove_event_file_dir+0x180/0x320 event_trace_del_tracer+0xb0/0x180 __remove_instance+0x224/0x508 instance_rmdir+0x44/0x78 tracefs_syscall_rmdir+0xbc/0x140 vfs_rmdir+0x1cc/0x4c8 do_rmdir+0x220/0x2b8 __arm64_sys_unlinkat+0xc0/0x100 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Zheng Yejian <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-12-13ARC: add hugetlb definitionsPavel Kozlov1-0/+7
Add hugetlb definitions if THP enabled. ARC doesn't support HugeTLB FS but it supports THP. Some kernel code such as pagemap uses hugetlb definitions with THP. This patch fixes ARC build issue (HPAGE_SIZE undeclared error) with TRANSPARENT_HUGEPAGE enabled. Signed-off-by: Pavel Kozlov <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2023-12-13scsi: ufs: core: Store min and max clk freq from OPP tableNitin Rawat1-0/+54
OPP support added by commit 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") doesn't update the min_freq and max_freq of each clock in 'struct ufs_clk_info'. But these values are used by the host drivers internally for controller configuration. When the OPP support is enabled in devicetree, these values will be 0, causing boot issues on the respective platforms. So add support to parse the min_freq and max_freq of all clocks while parsing the OPP table. Fixes: 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") Co-developed-by: Manish Pandey <[email protected]> Signed-off-by: Manish Pandey <[email protected]> Signed-off-by: Nitin Rawat <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-12-13Merge branch 'dpaa2-switch-various-fixes'Jakub Kicinski2-12/+6
Ioana Ciornei says: ==================== dpaa2-switch: various fixes The first patch fixes the size passed to two dma_unmap_single() calls which was wrongly put as the size of the pointer. The second patch is new to this series and reverts the behavior of the dpaa2-switch driver to not ask for object replay upon offloading so that we avoid the errors encountered when a VLAN is installed multiple times on the same port. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13dpaa2-switch: do not ask for MDB, VLAN and FDB replayIoana Ciornei1-9/+2
Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode") the switchdev_bridge_port_offload() helper was extended with the intention to provide switchdev drivers easy access to object addition and deletion replays. This works by calling the replay helpers with non-NULL notifier blocks. In the same commit, the dpaa2-switch driver was updated so that it passes valid notifier blocks to the helper. At that moment, no regression was identified through testing. In the meantime, the blamed commit changed the behavior in terms of which ports get hit by the replay. Before this commit, only the initial port which identified itself as offloaded through switchdev_bridge_port_offload() got a replay of all port objects and FDBs. After this, the newly joining port will trigger a replay of objects on all bridge ports and on the bridge itself. This behavior leads to errors in dpaa2_switch_port_vlans_add() when a VLAN gets installed on the same interface multiple times. The intended mechanism to address this is to pass a non-NULL ctx to the switchdev_bridge_port_offload() helper and then check it against the port's private structure. But since the driver does not have any use for the replayed port objects and FDBs until it gains support for LAG offload, it's better to fix the issue by reverting the dpaa2-switch driver to not ask for replay. The pointers will be added back when we are prepared to ignore replays on unrelated ports. Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups") Signed-off-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13dpaa2-switch: fix size of the dma_unmapIoana Ciornei1-3/+4
The size of the DMA unmap was wrongly put as a sizeof of a pointer. Change the value of the DMA unmap to be the actual macro used for the allocation and the DMA map. Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13net: prevent mss overflow in skb_segment()Eric Dumazet1-1/+2
Once again syzbot is able to crash the kernel in skb_segment() [1] GSO_BY_FRAGS is a forbidden value, but unfortunately the following computation in skb_segment() can reach it quite easily : mss = mss * partial_segs; 65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to a bad final result. Make sure to limit segmentation so that the new mss value is smaller than GSO_BY_FRAGS. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626 __dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f8692032aa9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9 RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480 R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Signed-off-by: Eric Dumazet <[email protected]> Cc: Marcelo Ricardo Leitner <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()Nikolay Kuratov1-1/+1
We need to do signed arithmetic if we expect condition `if (bytes < 0)` to be possible Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Nikolay Kuratov <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13net/mlx5e: Correct snprintf truncation handling for fw_version buffer used ↵Rahul Rameshbabu1-1/+1
by representors snprintf returns the length of the formatted string, excluding the trailing null, without accounting for truncation. This means that is the return value is greater than or equal to the size parameter, the fw_version string was truncated. Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors") Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Correct snprintf truncation handling for fw_version bufferRahul Rameshbabu1-1/+1
snprintf returns the length of the formatted string, excluding the trailing null, without accounting for truncation. This means that is the return value is greater than or equal to the size parameter, the fw_version string was truncated. Reported-by: David Laight <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf Fixes: 41e63c2baa11 ("net/mlx5e: Check return value of snprintf writing to fw_version buffer") Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Fix error codes in alloc_branch_attr()Dan Carpenter1-2/+4
Set the error code if set_branch_dest_ft() fails. Fixes: ccbe33003b10 ("net/mlx5e: TC, Don't offload post action rule if not supported") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()Dan Carpenter1-1/+3
Preserve the error code if esw_add_restore_rule() fails. Don't return success. Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport numVlad Buslov5-16/+18
Currently the destination rep pointer is only used for comparisons or to obtain vport number from it. Since it is used both during flow creation and deletion it may point to representor of another eswitch instance which can be deallocated during driver unload even when there are rules pointing to it[0]. Refactor the code to store vport number and 'valid' flag instead of the representor pointer. [0]: [176805.886303] ================================================================== [176805.889433] BUG: KASAN: slab-use-after-free in esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.892981] Read of size 2 at addr ffff888155090aa0 by task modprobe/27280 [176805.895462] CPU: 3 PID: 27280 Comm: modprobe Tainted: G B 6.6.0-rc3+ #1 [176805.896771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [176805.898514] Call Trace: [176805.899026] <TASK> [176805.899519] dump_stack_lvl+0x33/0x50 [176805.900221] print_report+0xc2/0x610 [176805.900893] ? mlx5_chains_put_table+0x33d/0x8d0 [mlx5_core] [176805.901897] ? esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.902852] kasan_report+0xac/0xe0 [176805.903509] ? esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.904461] esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.905223] __mlx5_eswitch_del_rule+0x1ae/0x460 [mlx5_core] [176805.906044] ? esw_cleanup_dests+0x440/0x440 [mlx5_core] [176805.906822] ? xas_find_conflict+0x420/0x420 [176805.907496] ? down_read+0x11e/0x200 [176805.908046] mlx5e_tc_rule_unoffload+0xc4/0x2a0 [mlx5_core] [176805.908844] mlx5e_tc_del_fdb_flow+0x7da/0xb10 [mlx5_core] [176805.909597] mlx5e_flow_put+0x4b/0x80 [mlx5_core] [176805.910275] mlx5e_delete_flower+0x5b4/0xb70 [mlx5_core] [176805.911010] tc_setup_cb_reoffload+0x27/0xb0 [176805.911648] fl_reoffload+0x62d/0x900 [cls_flower] [176805.912313] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core] [176805.913151] ? __fl_put+0x230/0x230 [cls_flower] [176805.913768] ? filter_irq_stacks+0x90/0x90 [176805.914335] ? kasan_save_stack+0x1e/0x40 [176805.914893] ? kasan_set_track+0x21/0x30 [176805.915484] ? kasan_save_free_info+0x27/0x40 [176805.916105] tcf_block_playback_offloads+0x79/0x1f0 [176805.916773] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core] [176805.917647] tcf_block_unbind+0x12d/0x330 [176805.918239] tcf_block_offload_cmd.isra.0+0x24e/0x320 [176805.918953] ? tcf_block_bind+0x770/0x770 [176805.919551] ? _raw_read_unlock_irqrestore+0x30/0x30 [176805.920236] ? mutex_lock+0x7d/0xd0 [176805.920735] ? mutex_unlock+0x80/0xd0 [176805.921255] tcf_block_offload_unbind+0xa5/0x120 [176805.921909] __tcf_block_put+0xc2/0x2d0 [176805.922467] ingress_destroy+0xf4/0x3d0 [sch_ingress] [176805.923178] __qdisc_destroy+0x9d/0x280 [176805.923741] dev_shutdown+0x1c6/0x330 [176805.924295] unregister_netdevice_many_notify+0x6ef/0x1500 [176805.925034] ? netdev_freemem+0x50/0x50 [176805.925610] ? _raw_spin_lock_irq+0x7b/0xd0 [176805.926235] ? _raw_spin_lock_bh+0xe0/0xe0 [176805.926849] unregister_netdevice_queue+0x1e0/0x280 [176805.927592] ? unregister_netdevice_many+0x10/0x10 [176805.928275] unregister_netdev+0x18/0x20 [176805.928835] mlx5e_vport_rep_unload+0xc0/0x200 [mlx5_core] [176805.929608] mlx5_esw_offloads_unload_rep+0x9d/0xc0 [mlx5_core] [176805.930492] mlx5_eswitch_unload_vf_vports+0x108/0x1a0 [mlx5_core] [176805.931422] ? mlx5_eswitch_unload_sf_vport+0x50/0x50 [mlx5_core] [176805.932304] ? rwsem_down_write_slowpath+0x11f0/0x11f0 [176805.932987] mlx5_eswitch_disable_sriov+0x6f9/0xa60 [mlx5_core] [176805.933807] ? mlx5_core_disable_hca+0xe1/0x130 [mlx5_core] [176805.934576] ? mlx5_eswitch_disable_locked+0x580/0x580 [mlx5_core] [176805.935463] mlx5_device_disable_sriov+0x138/0x490 [mlx5_core] [176805.936308] mlx5_sriov_disable+0x8c/0xb0 [mlx5_core] [176805.937063] remove_one+0x7f/0x210 [mlx5_core] [176805.937711] pci_device_remove+0x96/0x1c0 [176805.938289] device_release_driver_internal+0x361/0x520 [176805.938981] ? kobject_put+0x5c/0x330 [176805.939553] driver_detach+0xd7/0x1d0 [176805.940101] bus_remove_driver+0x11f/0x290 [176805.943847] pci_unregister_driver+0x23/0x1f0 [176805.944505] mlx5_cleanup+0xc/0x20 [mlx5_core] [176805.945189] __x64_sys_delete_module+0x2b3/0x450 [176805.945837] ? module_flags+0x300/0x300 [176805.946377] ? dput+0xc2/0x830 [176805.946848] ? __kasan_record_aux_stack+0x9c/0xb0 [176805.947555] ? __call_rcu_common.constprop.0+0x46c/0xb50 [176805.948338] ? fpregs_assert_state_consistent+0x1d/0xa0 [176805.949055] ? exit_to_user_mode_prepare+0x30/0x120 [176805.949713] do_syscall_64+0x3d/0x90 [176805.950226] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.950904] RIP: 0033:0x7f7f42c3f5ab [176805.951462] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [176805.953710] RSP: 002b:00007fff07dc9d08 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [176805.954691] RAX: ffffffffffffffda RBX: 000055b6e91c01e0 RCX: 00007f7f42c3f5ab [176805.955691] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6e91c0248 [176805.956662] RBP: 000055b6e91c01e0 R08: 0000000000000000 R09: 0000000000000000 [176805.957601] R10: 00007f7f42d9eac0 R11: 0000000000000206 R12: 000055b6e91c0248 [176805.958593] R13: 0000000000000000 R14: 000055b6e91bfb38 R15: 0000000000000000 [176805.959599] </TASK> [176805.960324] Allocated by task 20490: [176805.960893] kasan_save_stack+0x1e/0x40 [176805.961463] kasan_set_track+0x21/0x30 [176805.962019] __kasan_kmalloc+0x77/0x90 [176805.962554] esw_offloads_init+0x1bb/0x480 [mlx5_core] [176805.963318] mlx5_eswitch_init+0xc70/0x15c0 [mlx5_core] [176805.964092] mlx5_init_one_devl_locked+0x366/0x1230 [mlx5_core] [176805.964902] probe_one+0x6f7/0xc90 [mlx5_core] [176805.965541] local_pci_probe+0xd7/0x180 [176805.966075] pci_device_probe+0x231/0x6f0 [176805.966631] really_probe+0x1d4/0xb50 [176805.967179] __driver_probe_device+0x18d/0x450 [176805.967810] driver_probe_device+0x49/0x120 [176805.968431] __driver_attach+0x1fb/0x490 [176805.968976] bus_for_each_dev+0xed/0x170 [176805.969560] bus_add_driver+0x21a/0x570 [176805.970124] driver_register+0x133/0x460 [176805.970684] 0xffffffffa0678065 [176805.971180] do_one_initcall+0x92/0x2b0 [176805.971744] do_init_module+0x22d/0x720 [176805.972318] load_module+0x58c3/0x63b0 [176805.972847] init_module_from_file+0xd2/0x130 [176805.973441] __x64_sys_finit_module+0x389/0x7c0 [176805.974045] do_syscall_64+0x3d/0x90 [176805.974556] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.975566] Freed by task 27280: [176805.976077] kasan_save_stack+0x1e/0x40 [176805.976655] kasan_set_track+0x21/0x30 [176805.977221] kasan_save_free_info+0x27/0x40 [176805.977834] ____kasan_slab_free+0x11a/0x1b0 [176805.978505] __kmem_cache_free+0x163/0x2d0 [176805.979113] esw_offloads_cleanup_reps+0xb8/0x120 [mlx5_core] [176805.979963] mlx5_eswitch_cleanup+0x182/0x270 [mlx5_core] [176805.980763] mlx5_cleanup_once+0x9a/0x1e0 [mlx5_core] [176805.981477] mlx5_uninit_one+0xa9/0x180 [mlx5_core] [176805.982196] remove_one+0x8f/0x210 [mlx5_core] [176805.982868] pci_device_remove+0x96/0x1c0 [176805.983461] device_release_driver_internal+0x361/0x520 [176805.984169] driver_detach+0xd7/0x1d0 [176805.984702] bus_remove_driver+0x11f/0x290 [176805.985261] pci_unregister_driver+0x23/0x1f0 [176805.985847] mlx5_cleanup+0xc/0x20 [mlx5_core] [176805.986483] __x64_sys_delete_module+0x2b3/0x450 [176805.987126] do_syscall_64+0x3d/0x90 [176805.987665] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.988667] Last potentially related work creation: [176805.989305] kasan_save_stack+0x1e/0x40 [176805.989839] __kasan_record_aux_stack+0x9c/0xb0 [176805.990443] kvfree_call_rcu+0x84/0xa30 [176805.990973] clean_xps_maps+0x265/0x6e0 [176805.991547] netif_reset_xps_queues.part.0+0x3f/0x80 [176805.992226] unregister_netdevice_many_notify+0xfcf/0x1500 [176805.992966] unregister_netdevice_queue+0x1e0/0x280 [176805.993638] unregister_netdev+0x18/0x20 [176805.994205] mlx5e_remove+0xba/0x1e0 [mlx5_core] [176805.994872] auxiliary_bus_remove+0x52/0x70 [176805.995490] device_release_driver_internal+0x361/0x520 [176805.996196] bus_remove_device+0x1e1/0x3d0 [176805.996767] device_del+0x390/0x980 [176805.997270] mlx5_rescan_drivers_locked.part.0+0x130/0x540 [mlx5_core] [176805.998195] mlx5_unregister_device+0x77/0xc0 [mlx5_core] [176805.998989] mlx5_uninit_one+0x41/0x180 [mlx5_core] [176805.999719] remove_one+0x8f/0x210 [mlx5_core] [176806.000387] pci_device_remove+0x96/0x1c0 [176806.000938] device_release_driver_internal+0x361/0x520 [176806.001612] unbind_store+0xd8/0xf0 [176806.002108] kernfs_fop_write_iter+0x2c0/0x440 [176806.002748] vfs_write+0x725/0xba0 [176806.003294] ksys_write+0xed/0x1c0 [176806.003823] do_syscall_64+0x3d/0x90 [176806.004357] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176806.005317] The buggy address belongs to the object at ffff888155090a80 which belongs to the cache kmalloc-64 of size 64 [176806.006774] The buggy address is located 32 bytes inside of freed 64-byte region [ffff888155090a80, ffff888155090ac0) [176806.008773] The buggy address belongs to the physical page: [176806.009480] page:00000000a407e0e6 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155090 [176806.010633] flags: 0x200000000000800(slab|node=0|zone=2) [176806.011352] page_type: 0xffffffff() [176806.011905] raw: 0200000000000800 ffff888100042640 ffffea000422b1c0 dead000000000004 [176806.012949] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [176806.013933] page dumped because: kasan: bad access detected [176806.014935] Memory state around the buggy address: [176806.015601] ffff888155090980: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.016568] ffff888155090a00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.017497] >ffff888155090a80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.018438] ^ [176806.019007] ffff888155090b00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.020001] ffff888155090b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.020996] ================================================================== Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5: Fix fw tracer first block checkMoshe Shemesh1-1/+1
While handling new traces, to verify it is not the first block being written, last_timestamp is checked. But instead of checking it is non zero it is verified to be zero. Fix to verify last_timestamp is not zero. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Feras Daoud <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: XDP, Drop fragmented packets larger than MTU sizeCarolina Jubran1-1/+3
XDP transmits fragmented packets that are larger than MTU size instead of dropping those packets. The drop check that checks whether a packet is larger than MTU is comparing MTU size against the linear part length only. Adjust the drop check to compare MTU size against both linear and non-linear part lengths to avoid transmitting fragmented packets larger than MTU size. Fixes: 39a1665d16a2 ("net/mlx5e: Implement sending multi buffer XDP frames") Signed-off-by: Carolina Jubran <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Decrease num_block_tc when unblock tc offloadChris Mi1-1/+1
The cited commit increases num_block_tc when unblock tc offload. Actually should decrease it. Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Jianbo Liu <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Fix overrun reported by coverityJianbo Liu1-2/+10
Coverity Scan reports the following issue. But it's impossible that mlx5_get_dev_index returns 7 for PF, even if the index is calculated from PCI FUNC ID. So add the checking to make coverity slience. CID 610894 (#2 of 2): Out-of-bounds write (OVERRUN) Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte elements at element index 7 (byte offset 63) using index mlx5_get_dev_index(peer_dev) (which evaluates to 7). Fixes: 9bee385a6e39 ("net/mlx5: E-switch, refactor FDB miss rule add/remove") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: fix a potential double-free in fs_udp_create_groupsDinghao Liu1-0/+1
When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_udp_create_groups() will free ft->g. However, its caller fs_udp_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_udp_create_groups(). Fixes: 1c80bd684388 ("net/mlx5e: Introduce Flow Steering UDP API") Signed-off-by: Dinghao Liu <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Fix a race in command alloc flowShifeng Li1-5/+7
Fix a cmd->ent use after free due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process allocated a ent->idx but didn't set ent to cmd->ent_arr in cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into the spin lock. [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 [70013.081968] [70013.082028] Workqueue: events aer_isr [70013.082053] Call Trace: [70013.082067] dump_stack+0x8b/0xbb [70013.082086] print_address_description+0x6a/0x270 [70013.082102] kasan_report+0x179/0x2c0 [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] [70013.082409] pci_device_remove+0xf3/0x280 [70013.082439] device_release_driver_internal+0x1c3/0x470 [70013.082453] pci_stop_bus_device+0x109/0x160 [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 [70013.082485] pcie_do_fatal_recovery+0x167/0x550 [70013.082493] aer_isr+0x7d2/0x960 [70013.082543] process_one_work+0x65f/0x12d0 [70013.082556] worker_thread+0x87/0xb50 [70013.082571] kthread+0x2e9/0x3a0 [70013.082592] ret_from_fork+0x1f/0x40 The logical relationship of this error is as follows: aer_recover_work | ent->work -------------------------------------------+------------------------------ aer_recover_work_func | |- pcie_do_recovery | |- report_error_detected | |- mlx5_pci_err_detected |cmd_work_handler |- mlx5_enter_error_state | |- cmd_alloc_index |- enter_error_state | |- lock cmd->alloc_lock |- mlx5_cmd_flush | |- clear_bit |- mlx5_cmd_trigger_completions| |- unlock cmd->alloc_lock |- lock cmd->alloc_lock | |- vector = ~dev->cmd.vars.bitmask |- for_each_set_bit | |- cmd_ent_get(cmd->ent_arr[i]) (UAF) |- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx]=ent The cmd->ent_arr[ent->idx] assignment and the bit clearing are not protected by the cmd->alloc_lock in cmd_work_handler(). Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()Shifeng Li1-1/+1
Out_sz that the size of out buffer is calculated using query_nic_vport _context_in structure when driver query the MAC list. However query_nic _vport_context_in structure is smaller than query_nic_vport_context_out. When allowed_list_size is greater than 96, calling ether_addr_copy() will trigger an slab-out-of-bounds. [ 1170.055866] BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core] [ 1170.055869] Read of size 4 at addr ffff88bdbc57d912 by task kworker/u128:1/461 [ 1170.055870] [ 1170.055932] Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] [ 1170.055936] Call Trace: [ 1170.055949] dump_stack+0x8b/0xbb [ 1170.055958] print_address_description+0x6a/0x270 [ 1170.055961] kasan_report+0x179/0x2c0 [ 1170.056061] mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core] [ 1170.056162] esw_update_vport_addr_list+0x2c5/0xcd0 [mlx5_core] [ 1170.056257] esw_vport_change_handle_locked+0xd08/0x1a20 [mlx5_core] [ 1170.056377] esw_vport_change_handler+0x6b/0x90 [mlx5_core] [ 1170.056381] process_one_work+0x65f/0x12d0 [ 1170.056383] worker_thread+0x87/0xb50 [ 1170.056390] kthread+0x2e9/0x3a0 [ 1170.056394] ret_from_fork+0x1f/0x40 Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists") Cc: Ding Hui <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13net/mlx5e: fix double free of encap_headerVlad Buslov1-8/+12
Cited commit introduced potential double free since encap_header can be destroyed twice in some cases - once by error cleanup sequence in mlx5e_tc_tun_{create|update}_header_ipv{4|6}(), once by generic mlx5e_encap_put() that user calls as a result of getting an error from tunnel create|update. At the same time the point where e->encap_header is assigned can't be delayed because the function can still return non-error code 0 as a result of checking for NUD_VALID flag, which will cause neighbor update to dereference NULL encap_header. Fix the issue by: - Nulling local encap_header variables in mlx5e_tc_tun_{create|update}_header_ipv{4|6}() to make kfree(encap_header) call in error cleanup sequence noop after that point. - Assigning reformat_params.data from e->encap_header instead of local variable encap_header that was set to NULL pointer by previous step. Also assign reformat_params.size from e->encap_size for uniformity and in order to make the code less error-prone in the future. Fixes: d589e785baf5 ("net/mlx5e: Allow concurrent creation of encap entries") Reported-by: Dust Li <[email protected]> Reported-by: Cruz Zhao <[email protected]> Reported-by: Tianchen Ding <[email protected]> Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13Revert "net/mlx5e: fix double free of encap_header"Vlad Buslov1-4/+6
This reverts commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1. This patch is causing a null ptr issue, the proper fix is in the next patch. Fixes: 6f9b1a073166 ("net/mlx5e: fix double free of encap_header") Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13Revert "net/mlx5e: fix double free of encap_header in update funcs"Vlad Buslov1-10/+10
This reverts commit 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb. This patch is causing a null ptr issue, the proper fix is in the next patch. Fixes: 3a4aa3cb8356 ("net/mlx5e: fix double free of encap_header in update funcs") Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-12-13Merge branch ' bpf fix for unconnect af_unix socket'Martin KaFai Lau3-0/+41
John Fastabend says: ==================== Eric reported a syzbot splat from a null ptr deref from recent fix to resolve a use-after-free with af-unix stream sockets and BPF sockmap usage. The issue is I missed is we allow unconnected af_unix STREAM sockets to be added to the sockmap. Fix this by blocking unconnected sockets. v2: change sk_is_unix to sk_is_stream_unix (Eric) and remove duplicate ASSERTS in selftests the xsocket helper already marks FAIL (Jakub) ==================== Signed-off-by: Martin KaFai Lau <[email protected]>
2023-12-13bpf: sockmap, test for unconnected af_unix sockJohn Fastabend1-0/+34
Add test to sockmap_basic to ensure af_unix sockets that are not connected can not be added to the map. Ensure we keep DGRAM sockets working however as these will not be connected typically. Signed-off-by: John Fastabend <[email protected]> Acked-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-12-13bpf: syzkaller found null ptr deref in unix_bpf proto addJohn Fastabend2-0/+7
I added logic to track the sock pair for stream_unix sockets so that we ensure lifetime of the sock matches the time a sockmap could reference the sock (see fixes tag). I forgot though that we allow af_unix unconnected sockets into a sock{map|hash} map. This is problematic because previous fixed expected sk_pair() to exist and did not NULL check it. Because unconnected sockets have a NULL sk_pair this resulted in the NULL ptr dereference found by syzkaller. BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171 Write of size 4 at addr 0000000000000080 by task syz-executor360/5073 Call Trace: <TASK> ... sock_hold include/net/sock.h:777 [inline] unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171 sock_map_init_proto net/core/sock_map.c:190 [inline] sock_map_link+0xb87/0x1100 net/core/sock_map.c:294 sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483 sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577 bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167 We considered just checking for the null ptr and skipping taking a ref on the NULL peer sock. But, if the socket is then connected() after being added to the sockmap we can cause the original issue again. So instead this patch blocks adding af_unix sockets that are not in the ESTABLISHED state. Reported-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Fixes: 8866730aed51 ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock") Acked-by: Jakub Sitnicki <[email protected]> Signed-off-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-12-13Merge tag 'v6.7-rockchip-clkfixes1' of ↵Stephen Boyd2-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull Rockchip clk driver fixes for the merge window from Heiko Stuebner: Fixes for a wrong clockname, a wrong clock-parent, a wrong clock-gate and finally one new PLL rate for the rk3568 to fix display artifacts on a handheld devices based on that soc. * tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name clk: rockchip: rk3128: Fix aclk_peri_src's parent clk: rockchip: rk3128: Fix HCLK_OTG gate register clk: rockchip: rk3568: Add PLL rate for 292.5MHz
2023-12-13drm/amdgpu: warn when there are still mappings when a BO is destroyed v2Christian König1-0/+2
This can only happen when there is a reference counting bug. v2: fix typo Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-12-13drm/amdgpu: fix tear down order in amdgpu_vm_pt_freeChristian König1-1/+2
When freeing PD/PT with shadows it can happen that the shadow destruction races with detaching the PD/PT from the VM causing a NULL pointer dereference in the invalidation code. Fix this by detaching the the PD/PT from the VM first and then freeing the shadow instead. Signed-off-by: Christian König <[email protected]> Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867 Cc: <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-12-13drm/amd: Fix a probing order problem on SDMA 2.4Mario Limonciello1-2/+2
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") made a fateful mistake in `adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode() was run. This caused probing to fail. Move the declaration to right before sdma_v2_4_init_microcode(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043 Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-12-13drm/amdgpu/sdma5.2: add begin/end_use ring callbacksAlex Deucher1-0/+28
Add begin/end_use ring callbacks to disallow GFXOFF when SDMA work is submitted and allow it again afterward. This should avoid corner cases where GFXOFF is erroneously entered when SDMA is still active. For now just allow/disallow GFXOFF in the begin and end helpers until we root cause the issue. This should not impact power as SDMA usage is pretty minimal and GFXOSS should not be active when SDMA is active anyway, this just makes it explicit. v2: move everything into sdma5.2 code. No reason for this to be generic at this point. v3: Add comments in new code Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220 Reviewed-by: Mario Limonciello <[email protected]> (v1) Tested-by: Mario Limonciello <[email protected]> (v1) Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.15+
2023-12-13sign-file: Fix incorrect return values checkYusong Gao1-6/+6
There are some wrong return values check in sign-file when call OpenSSL API. The ERR() check cond is wrong because of the program only check the return value is < 0 which ignored the return val is 0. For example: 1. CMS_final() return 1 for success or 0 for failure. 2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure. 3. i2d_TYPEbio() return 1 for success and 0 for failure. 4. BIO_free() return 1 for success and 0 for failure. Link: https://www.openssl.org/docs/manmaster/man3/ Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature") Signed-off-by: Yusong Gao <[email protected]> Reviewed-by: Juerg Haefliger <[email protected]> Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ # v5 Signed-off-by: Linus Torvalds <[email protected]>
2023-12-13Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull ufs fix from Al Viro: "ufs got broken this merge window on folio conversion - calling conventions for filemap_lock_folio() are not the same as for find_lock_page()" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix ufs_get_locked_folio() breakage
2023-12-13Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"Jakub Kicinski1-1/+1
This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3. Paolo reports that the change disables autocorking even after the userspace sets TCP_CORK. Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13Merge tag 'efi-urgent-for-v6.7-2' of ↵Linus Torvalds4-13/+30
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Deal with a regression in the recently refactored x86 EFI stub code on older Dell systems by disabling randomization of the physical load address - Use the correct load address for relocatable Loongarch kernels * tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: Avoid physical KASLR on older Dell systems efi/loongarch: Use load address to calculate kernel entry address
2023-12-13i40e: Fix ST code value for Clause 45Ivan Vecera2-3/+3
ST code value for clause 45 that has been changed by commit 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") is currently wrong. The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so their value is the same for both clauses. The value is correct for clause 22 but not for clause 45. Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK macro that specifies required value. Fixes: 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-13ice: fix theoretical out-of-bounds access in ethtool link modesMichal Schmidt1-2/+2
To map phy types reported by the hardware to ethtool link mode bits, ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup). The "low" table has 64 elements to cover every possible bit the hardware may report, but the "high" table has only 13. If the hardware reports a higher bit in phy_types_high, the driver would access memory beyond the lookup table's end. Instead of iterating through all 64 bits of phy_types_{low,high}, use the sizes of the respective lookup tables. Fixes: 9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode") Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-13bcachefs: Fix determining required file handle lengthJan Kara1-5/+14
The ->encode_fh method is responsible for setting amount of space required for storing the file handle if not enough space was provided. bch2_encode_fh() was not setting required length in that case which breaks e.g. fanotify. Fix it. Reported-by: Petr Vorel <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Kent Overstreet <[email protected]>
2023-12-13drm/panel: ltk050h3146w: Set burst mode for ltk050h3148wFarouk Bouabid1-1/+1
The ltk050h3148w variant expects the horizontal component lane byte clock cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the pixel clock. Using the pixel clock rate by default for this calculation was introduced in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") and starting from commit 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") only panels that support burst mode can keep using the lane_mbps. So add MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host. Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") Signed-off-by: Farouk Bouabid <[email protected]> Reviewed-by: Jessica Zhang <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-12-13fix ufs_get_locked_folio() breakageAl Viro1-1/+1
filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not in cache - not NULL like find_lock_page() used to. Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio" Signed-off-by: Al Viro <[email protected]>
2023-12-13io_uring/poll: don't enable lazy wake for POLLEXCLUSIVEJens Axboe2-3/+20
There are a few quirks around using lazy wake for poll unconditionally, and one of them is related the EPOLLEXCLUSIVE. Those may trigger exclusive wakeups, which wake a limited number of entries in the wait queue. If that wake number is less than the number of entries someone is waiting for (and that someone is also using DEFER_TASKRUN), then we can get stuck waiting for more entries while we should be processing the ones we already got. If we're doing exclusive poll waits, flag the request as not being compatible with lazy wakeups. Reported-by: Pavel Begunkov <[email protected]> Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups") Signed-off-by: Jens Axboe <[email protected]>
2023-12-13MAINTAINERS: powerpc: Add Aneesh & NaveenMichael Ellerman1-0/+2
Aneesh and Naveen are helping out with some aspects of upstream maintenance, add them as reviewers. Acked-by: "Aneesh Kumar K.V (IBM)" <[email protected]> Acked-by: "Naveen N. Rao" <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-12-13powerpc/pseries/vas: Migration suspend waits for no in-progress open windowsHaren Myneni2-7/+46
The hypervisor returns migration failure if all VAS windows are not closed. During pre-migration stage, vas_migration_handler() sets migration_in_progress flag and closes all windows from the list. The allocate VAS window routine checks the migration flag, setup the window and then add it to the list. So there is possibility of the migration handler missing the window that is still in the process of setup. t1: Allocate and open VAS t2: Migration event window lock vas_pseries_mutex If migration_in_progress set unlock vas_pseries_mutex return open window HCALL unlock vas_pseries_mutex Modify window HCALL lock vas_pseries_mutex setup window migration_in_progress=true Closes all windows from the list // May miss windows that are // not in the list unlock vas_pseries_mutex lock vas_pseries_mutex return if nr_closed_windows == 0 // No DLPAR CPU or migration add window to the list // Window will be added to the // list after the setup is completed unlock vas_pseries_mutex return unlock vas_pseries_mutex Close VAS window // due to DLPAR CPU or migration return -EBUSY This patch resolves the issue with the following steps: - Set the migration_in_progress flag without holding mutex. - Introduce nr_open_wins_progress counter in VAS capabilities struct - This counter tracks the number of open windows are still in progress - The allocate setup window thread closes windows if the migration is set and decrements nr_open_window_progress counter - The migration handler waits for no in-progress open windows. The code flow with the fix is as follows: t1: Allocate and open VAS t2: Migration event window lock vas_pseries_mutex If migration_in_progress set unlock vas_pseries_mutex return open window HCALL nr_open_wins_progress++ // Window opened, but not // added to the list yet unlock vas_pseries_mutex Modify window HCALL migration_in_progress=true setup window lock vas_pseries_mutex Closes all windows from the list While nr_open_wins_progress { unlock vas_pseries_mutex lock vas_pseries_mutex sleep if nr_closed_windows == 0 // Wait if any open window in or migration is not started // progress. The open window // No DLPAR CPU or migration // thread closes the window without add window to the list // adding to the list and return if nr_open_wins_progress-- // the migration is in progress. unlock vas_pseries_mutex return Close VAS window nr_open_wins_progress-- unlock vas_pseries_mutex return -EBUSY lock vas_pseries_mutex } unlock vas_pseries_mutex return Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler") Signed-off-by: Haren Myneni <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-12-13Merge branch 'stmmac-bug-fixes'David S. Miller3-17/+8
Yanteng Si says: ==================== stmmac: Some bug fixes * Put Krzysztof's patch into my thread, pick Conor's Reviewed-by tag and Jiaxun's Acked-by tag.(prev version is RFC patch) * I fixed an Oops related to mdio, mainly to ensure that mdio is initialized before use, because it will be used in a series of patches I am working on. see <https://lore.kernel.org/loongarch/[email protected]/T/#t> ==================== Signed-off-by: David S. Miller <[email protected]>
2023-12-13MIPS: dts: loongson: drop incorrect dwmac fallback compatibleKrzysztof Kozlowski2-4/+2
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS, so checking for some other compatible does not make sense. It cannot be bound to unsupported platform. Drop useless, incorrect (space in between) and undocumented compatible. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Yanteng Si <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Acked-by: Jiaxun Yang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-13stmmac: dwmac-loongson: drop useless check for compatible fallbackKrzysztof Kozlowski1-5/+0
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS, so checking for some other compatible does not make sense. It cannot be bound to unsupported platform. Drop useless, incorrect (space in between) and undocumented compatible. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Yanteng Si <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Acked-by: Jiaxun Yang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-13stmmac: dwmac-loongson: Make sure MDIO is initialized before useYanteng Si1-8/+6
Generic code will use mdio. If it is not initialized before use, the kernel will Oops. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yanteng Si <[email protected]> Signed-off-by: Feiyang Chen <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-13dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yamlDavid Heidelberg2-2/+2
Originally was in the panel-simple, but belongs to panel-simple-dsi. See arch/arm/boot/dts/nvidia/tegra114-roth.dts for more details. Resolves the following warning: ``` arch/arm/boot/dts/tegra114-roth.dt.yaml: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/panel/panel-simple.yaml ``` Fixes: 310abcea76e9 ("dt-bindings: display: convert simple lg panels to DT Schema") Signed-off-by: David Heidelberg <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Jessica Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.