| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It has been found that sending subcommands and rumble data packets at
too great a rate can result in controller disconnects. This patch limits
the rate of subcommands/rumble to once every 25 milliseconds.
Similar to sending subcommands, it is more reliable to send the rumble
data packets immediately after we've received an input report from the
controller. This results in far fewer bluetooth disconnects for the
controller.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch alters the method that the rumble data is sent to the
controller. Rather than using the enable rumble subcommand for this
purpose, the driver now employs the RUMBLE_ONLY output report. This has
the advantage of not needing to receive a subcommand reply (to the major
benefit of reducing IMU latency) and also seems to make the rumble
vibrations more continuous. Perhaps most importantly it reduces
disconnects during times of heavy rumble.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds support for the controller's IMU. The accelerometer and
gyro data are both provided to userspace using a second input device.
The devices can be associated using their uniq value (set to the
controller's MAC address).
A large part of this patch's functionality was provided by Carl Mueller.
The IMU device is blacklisted from the joydev input handler.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
If the controller's SPI flash contains user stick calibration(s), they
should be prioritized over the factory calibrations. The user
calibrations have 2 magic bytes preceding them. If the bytes are the
correct magic values, the user calibration is used.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds support for the joy-con charging grip. The peripheral
essentially behaves the same as a pro controller, but with two joy-cons
attached to the grip. However the grip exposes the two joy-cons as
separate hid devices, so extra handling is required. The joy-con is
queried to check if it is a right or left joy-con (since the product ID
is identical between left/right when using the grip).
Since controller model detection is now more complicated, the various
checks for hid product values have been replaced with helper macros to
reduce code duplication.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch sets the input device's uniq identifier to the controller's
MAC address. This is useful for future association between an IMU input
device with the normal input device as well as associating the
controller with any serial joy-con driver.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch fixes meaningless error output from trying to send
subcommands immediately after controller removal. It now disables
subcommands as soon as possible on removal.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch sets the most significant bit of the hid hw version to allow
userspace to distinguish between this driver's input mappings vs. the
default hid mappings. This prevents breaking userspace applications that
use SDL2 for gamepad input, allowing them to distinguish the mappings
based on the version.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Waiting to send subcommands until right after receiving an input report
drastically improves subcommand reliability. If the driver has finished
initial controller configuration, it now waits until receiving an input
report for all subcommands.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The controller occasionally doesn't respond to subcommands. It appears
that it's dropping them. To improve reliability, this patch attempts one
retry in the case of a synchronous send timeout. In testing, this has
resolved all timeout failures (most common for LED setting and rumble
setting subcommands).
The 1 second timeout is excessively long for rumble and LED subcommands,
so the timeout has been made a param for joycon_hid_send_sync. Most
subcommands continue to use the 1s timeout, since they can result in
long response times. Rumble and LED setting subcommands have been
reduced to 250ms, since response times for them are much quicker (and
this significantly reduces the observable impact in the case of a retry
being required).
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds support for controller rumble.
The ff_effect weak magnitude is associated with the pro controller's
right motor (or with a right joy-con). The strong magnitude is
associated with the pro's left motor (or a left joy-con).
The rumble data is sent periodically (currently configured for every 50
milliseconds). If the controller receives no rumble data for too long a
time period, it will stop vibrating. The data is also sent every time
joycon_set_rumble is called to avoid latency of up to 50ms.
Because the rumble subcommands are sent in a deferred workqueue (they
can't be sent in the play_effect function due to the hid send sleeping),
the effects are queued. This ensures that no rumble effect is missed due
to them arriving in too quick of succession.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds the ability to set the intensity level of the home
button's LED.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds power_supply functionality to the switch controller
driver for its battery.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch adds led_classdev functionality to the switch controller
driver. It adds support for the 4 player LEDs. The Home Button LED still
needs to be supported on the pro controllers and right joy-con.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The hid-nintendo driver supports the Nintendo Switch Pro Controllers and
the Joy-Cons. The Pro Controllers can be used over USB or Bluetooth.
The Joy-Cons each create their own, independent input devices, so it is
up to userspace to combine them if desired.
Signed-off-by: Daniel J. Ogorchock <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
brightness_set_blocking() callback expects function returning int. This fixes
the follwoing build failure:
drivers/hid/hid-playstation.c: In function ‘dualsense_player_led_set_brightness’:
drivers/hid/hid-playstation.c:885:1: error: no return statement in function returning non-void [-Werror=return-type]
}
^
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The DualSense player LEDs were so far not adjustable from user-space.
This patch exposes each LED individually through the LED class. Each
LED uses the new 'player' function resulting in a name like:
'inputX:white:player-1' for the first LED.
Signed-off-by: Roderick Colenbrander <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Player LEDs are commonly found on game controllers from Nintendo and Sony
to indicate a player ID across a number of LEDs. For example, "Player 2"
might be indicated as "-x--" on a device with 4 LEDs where "x" means on.
This patch introduces LED_FUNCTION_PLAYER1-5 defines to properly indicate
player LEDs from the kernel. Until now there was no good standard, which
resulted in inconsistent behavior across xpad, hid-sony, hid-wiimote and
other drivers. Moving forward new drivers should use LED_FUNCTION_PLAYERx.
Note: management of Player IDs is left to user space, though a kernel
driver may pick a default value.
Signed-off-by: Roderick Colenbrander <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The DualSense lightbar has so far been supported, but it was not yet
adjustable from user space. This patch exposes it through a multi-color
LED.
Signed-off-by: Roderick Colenbrander <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- NULL pointer dereference fixes in amd_sfh driver (Basavaraj Natikar,
Evgeny Novikov)
- data processing fix for hid-u2fzero (Andrej Shadura)
- fix for out-of-bounds write in hid-betop (F.A.Sulaiman)
- new device IDs / device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix potential NULL pointer dereference
HID: u2fzero: ignore incomplete packets without data
HID: amd_sfh: Fix potential NULL pointer dereference
HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs
HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
HID: betop: fix slab-out-of-bounds Write in betop_probe
|
|
The cl_data field of a privdata must be allocated and updated before
using in amd_sfh_hid_client_init() function.
Hence handling NULL pointer cl_data accordingly.
Fixes: d46ef750ed58 ("HID: amd_sfh: Fix potential NULL pointer dereference")
Signed-off-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
|
|
Pull ksmbd fixes from Steve French:
"Five fixes for the ksmbd kernel server, including three security
fixes:
- remove follow symlinks support
- use LOOKUP_BENEATH to prevent out of share access
- SMB3 compounding security fix
- fix for returning the default streams correctly, fixing a bug when
writing ppt or doc files from some clients
- logging more clearly that ksmbd is experimental (at module load
time)"
* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
ksmbd: remove follow symlinks support
ksmbd: check protocol id in ksmbd_verify_smb_message()
ksmbd: add default data stream name in FILE_STREAM_INFORMATION
ksmbd: log that server is experimental at module load
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix two EDAC drivers using the wrong value type for the DIMM mode"
* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/dmc520: Assign the proper type to dimm->edac_mode
EDAC/synopsys: Fix wrong value type assignment for edac_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix thermal shutdown after a suspend/resume due to a wrong TCC value
restored on Intel platform (Antoine Tenart)
- Fix potential buffer overflow when building the list of policies. The
buffer size is not updated after writing to it (Dan Carpenter)
- Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)
* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
thermal/drivers/int340x: Do not set a wrong tcc offset on resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Prevent sending the wrong signal when protection keys are enabled
and the kernel handles a fault in the vsyscall emulation.
- Invoke early_reserve_memory() before invoking e820_memory_setup()
which is required to make the Xen dom0 e820 hooks work correctly.
- Use the correct data type for the SETZ operand in the EMQCMDS
instruction wrapper.
- Prevent undefined behaviour to the potential unaligned accesss in
the instruction decoder library"
* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
x86/asm: Fix SETZ size enqcmds() build failure
x86/setup: Call early_reserve_memory() earlier
x86/fault: Fix wrong signal when vsyscall fails with pkey
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the recently introduced regression in posix CPU
timers which failed to stop the timer when requested. That caused
unexpected signals to be sent to the process/thread causing
malfunction"
* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent spuriously armed 0-value itimer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Work around a bad GIC integration on a Renesas platform which can't
handle byte-sized MMIO access
- Plug a potential memory leak in the GICv4 driver
- Fix a regression in the Armada 370-XP IPI code which was caused by
issuing EOI instack of ACK.
- A couple of small fixes here and there"
* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Work around broken Renesas integration
irqchip/renesas-rza1: Use semicolons instead of commas
irqchip/gic-v3-its: Fix potential VPE leak on error
irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
irqchip/mbigen: Repair non-kernel-doc notation
irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
irqchip/armada-370-xp: Fix ack/eoi breakage
Documentation: Fix irq-domain.rst build warning
|
|
Merge misc fixes from Andrew Morton:
"16 patches.
Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
debug, and pagemap)"
* emailed patches from Andrew Morton <[email protected]>:
mm: fix uninitialized use in overcommit_policy_handler
mm/memory_failure: fix the missing pte_unmap() call
kasan: always respect CONFIG_KASAN_STACK
sh: pgtable-3level: fix cast to pointer from integer of different size
mm/debug: sync up latest migrate_reason to migrate_reason_names
mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
mm: fs: invalidate bh_lrus for only cold path
lib/zlib_inflate/inffast: check config in C to avoid unused function warning
tools/vm/page-types: remove dependency on opt_file for idle page tracking
scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
ocfs2: drop acl cache for directories too
mm/shmem.c: fix judgment error in shmem_is_huge()
xtensa: increase size of gcc stack frame check
mm/damon: don't use strnlen() with known-bogus source length
kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirty-three fixes, I'm afraid.
Essentially the build up from the last couple of weeks while I've been
dealling with Linux Plumbers conference infrastructure issues. It's
mostly the usual assortment of spelling fixes and minor corrections.
The only core relevant changes are to the sd driver to reduce the spin
up message spew and fix a small memory leak on the freeing path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
scsi: ses: Retry failed Send/Receive Diagnostic commands
scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
scsi: lpfc: Fix gcc -Wstringop-overread warning, again
scsi: lpfc: Use correct scnprintf() limit
scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
scsi: core: Remove 'current_tag'
scsi: acornscsi: Remove tagged queuing vestiges
scsi: fas216: Kill scmd->tag
scsi: qla2xxx: Restore initiator in dual mode
scsi: ufs: core: Unbreak the reset handler
scsi: sd_zbc: Support disks with more than 2**32 logical blocks
scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
scsi: bsg: Fix device unregistration
scsi: sd: Make sd_spinup_disk() less noisy
scsi: ufs: ufs-pci: Fix Intel LKF link stability
scsi: mpt3sas: Clean up some inconsistent indenting
scsi: megaraid: Clean up some inconsistent indenting
scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
scsi: Remove SCSI CDROM MAINTAINERS entry
scsi: megaraid: Fix Coccinelle warning
...
|
|
Pull io_uring fixes from Jens Axboe:
"This one looks a bit bigger than it is, but that's mainly because 2/3
of it is enabling IORING_OP_CLOSE to close direct file descriptors.
We've had a few folks using them and finding it confusing that the way
to close them is through using -1 for file update, this just brings
API symmetry for direct descriptors. Hence I think we should just do
this now and have a better API for 5.15 release. There's some room for
de-duplicating the close code, but we're leaving that for the next
merge window.
Outside of that, just small fixes:
- Poll race fixes (Hao)
- io-wq core dump exit fix (me)
- Reschedule around potentially intensive tctx and buffer iterators
on teardown (me)
- Fix for always ending up punting files update to io-wq (me)
- Put the provided buffer meta data under memcg accounting (me)
- Tweak for io_write(), removing dead code that was added with the
iterator changes in this release (Pavel)"
* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
io_uring: make OP_CLOSE consistent with direct open
io_uring: kill extra checks in io_write()
io_uring: don't punt files update to io-wq unconditionally
io_uring: put provided buffer meta data under memcg accounting
io_uring: allow conditional reschedule for intensive iterators
io_uring: fix potential req refcount underflow
io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
io_uring: fix race between poll completion and cancel_hash insertion
io-wq: ensure we exit if thread group is exiting
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- keep ctrl->namespaces ordered (Christoph Hellwig)
- fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
Grimberg)
- handled updated hw_queues in nvme-fc more carefully (Daniel
Wagner, James Smart)
- md lock order fix (Christoph)
- fallocate locking fix (Ming)
- blktrace UAF fix (Zhihao)
- rq-qos bio tracking fix (Ming)
* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
block: hold ->invalidate_lock in blkdev_fallocate
blktrace: Fix uaf in blk_trace access after removing by sysfs
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
md: fix a lock order reversal in md_alloc
nvme: keep ctrl->namespaces ordered
nvme-tcp: fix incorrect h2cdata pdu offset accounting
nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
nvme-fc: avoid race between time out and tear down
nvme-fc: update hardware queues before using them
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- fix to Kselftest common framework header install to run before other
targets for it work correctly in parallel build case.
- fixes to kvm test to not ignore fscanf() returns which could result
in inconsistent test behavior and failures.
* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
selftests: kvm: move get_run_delay() into lib/test_util
selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
selftests: be sure to make khdr before other targets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two bugfixes to fix the 4KiB blockmap chunk format availability and a
dangling pointer usage. There is also a trivial cleanup to clarify
compacted_2b if compacted_4b_initial > totalidx.
Summary:
- fix the dangling pointer use in erofs_lookup tracepoint
- fix unsupported chunk format check
- zero out compacted_2b if compacted_4b_initial > totalidx"
* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clear compacted_2b if compacted_4b_initial > totalidx
erofs: fix misbehavior of unsupported chunk format check
erofs: fix up erofs_lookup tracepoint
|
|
Pull cifs fixes from Steve French:
"Six small cifs/smb3 fixes, two for stable:
- important fix for deferred close (found by a git functional test)
related to attribute caching on close.
- four (two cosmetic, two more serious) small fixes for problems
pointed out by smatch via Dan Carpenter
- fix for comment formatting problems pointed out by W=1"
* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix incorrect check for null pointer in header_assemble
smb3: correct server pointer dereferencing check to be more consistent
smb3: correct smb3 ACL security descriptor
cifs: Clear modified attribute bit from inode flags
cifs: Deal with some warnings from W=1
cifs: fix a sign extension bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.15-rc3.
Nothing huge in here, just fixes for a number of small issues that
have been reported. These include:
- habanalabs race conditions and other bugs fixed
- binder driver fixes
- fpga driver fixes
- coresight build warning fix
- nvmem driver fix
- comedi memory leak fix
- bcm-vk tty race fix
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
comedi: Fix memory leak in compat_insnlist()
nvmem: NVMEM_NINTENDO_OTP should depend on WII
misc: bcm-vk: fix tty registration race
fpga: dfl: Avoid reads to AFU CSRs during enumeration
fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
fpga: machxo2-spi: Return an error on failure
habanalabs: expose a single cs seq in staged submissions
habanalabs: fix wait offset handling
habanalabs: rate limit multi CS completion errors
habanalabs/gaudi: fix LBW RR configuration
habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
habanalabs: fail collective wait when not supported
habanalabs/gaudi: use direct MSI in single mode
habanalabs: fix kernel OOPs related to staged cs
habanalabs: fix potential race in interrupt wait ioctl
mcb: fix error handling in mcb_alloc_bus()
misc: genwqe: Fixes DMA mask setting
coresight: syscfg: Fix compiler warning
nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM
binder: make sure fd closes complete
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 5.15-rc3:
- greybus tty use-after-free bugfix
- r8188eu ioctl overlap build warning fix
Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
it's good to get this fixed now for people using this in 5.15.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: fix -Wrestrict warnings
staging: greybus: uart: fix tty use after free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial driver fixes for 5.15-rc3. They
include:
- remove an export now that no one is using it anymore
- mvebu-uart tx_empty callback fix
- 8250_omap bugfix
- synclink_gt build fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: unexport tty_ldisc_release
tty: synclink_gt: rename a conflicting function name
serial: mvebu-uart: fix driver's tx_empty callback
serial: 8250: 8250_omap: Fix RX_LVL register offset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 5.15-rc3.
They include:
- usb-storage quirk additions
- usb-serial new device ids
- usb-serial driver fixes
- USB roothub registration bugfix to resolve a long-reported issue
- usb gadget driver fixes for a large number of small things
- dwc2 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
MAINTAINERS: usb, update Peter Korsgaard's entries
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
xhci: Set HCD flag to defer primary roothub registration
usb: core: hcd: Add support for deferring roothub registration
usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
usb: dwc3: core: balance phy init and exit
Revert "USB: bcma: Add a check for devm_gpiod_get"
...
|
|
instead of removing '..' in a given path, call
kern_path with LOOKUP_BENEATH flag to prevent
the out of share access.
ran various test on this:
smb2-cat-async smb://127.0.0.1/homes/../out_of_share
smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share
smbclient //127.0.0.1/homes -c "mkdir ../foo2"
smbclient //127.0.0.1/homes -c "rename bar ../bar"
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Boehme <[email protected]>
Tested-by: Steve French <[email protected]>
Tested-by: Namjae Jeon <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Hyunchul Lee <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
We get an unexpected value of /proc/sys/vm/overcommit_memory after
running the following program:
int main()
{
int fd = open("/proc/sys/vm/overcommit_memory", O_RDWR);
write(fd, "1", 1);
write(fd, "2", 1);
close(fd);
}
write(fd, "2", 1) will pass *ppos = 1 to proc_dointvec_minmax.
proc_dointvec_minmax will return 0 without setting new_policy.
t.data = &new_policy;
ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos)
-->do_proc_dointvec
-->__do_proc_dointvec
if (write) {
if (proc_first_pos_non_zero_ignore(ppos, table))
goto out;
sysctl_overcommit_memory = new_policy;
so sysctl_overcommit_memory will be set to an uninitialized value.
Check whether new_policy has been changed by proc_dointvec_minmax.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 56f3547bfa4d ("mm: adjust vm_committed_as_batch according to vm overcommit policy")
Signed-off-by: Chen Jun <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Feng Tang <[email protected]>
Reviewed-by: Kefeng Wang <[email protected]>
Cc: Rui Xiang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The paired pte_unmap() call is missing before the
dev_pagemap_mapping_shift() returns. So fix it.
David says:
"I guess this code never runs on 32bit / highmem, that's why we didn't
notice so far".
[[email protected]: cleanup]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qi Zheng <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd
is "unsigned long long", causing:
In file included from arch/sh/include/asm/pgtable.h:13,
from include/linux/pgtable.h:6,
from include/linux/mm.h:33,
from arch/sh/kernel/asm-offsets.c:14:
arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable':
arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
37 | return (pmd_t *)pud_val(pud);
| ^
Fix this by adding an intermediate cast to "unsigned long", which is
basically what the old code did before.
Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be
Fixes: 9cf6fa2458443118 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Tested-by: Daniel Palmer <[email protected]>
Acked-by: Rob Landley <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: "Aneesh Kumar K . V" <[email protected]>
Cc: Jacopo Mondi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Sync up MR_DEMOTION to migrate_reason_names and add a synch prompt.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 26aa2d199d6f ("mm/migrate: demote pages during reclaim")
Signed-off-by: Weizhao Ouyang <[email protected]>
Reviewed-by: "Huang, Ying" <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Mina Almasry <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Wei Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN to migrate_reason_names.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 310253514bbf ("mm/migrate: rename migration reason MR_CMA to MR_CONTIG_RANGE")
Fixes: d1e153fea2a8 ("mm/gup: migrate pinned pages out of movable zone")
Signed-off-by: Weizhao Ouyang <[email protected]>
Reviewed-by: "Huang, Ying" <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Mina Almasry <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel test robot reported the regression of fio.write_iops[1] with
commit 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration").
Since lru_add_drain is called frequently, invalidate bh_lrus there could
increase bh_lrus cache miss ratio, which needs more IO in the end.
This patch moves the bh_lrus invalidation from the hot path( e.g.,
zap_page_range, pagevec_release) to cold path(i.e., lru_add_drain_all,
lru_cache_disable).
Zhengjun Xing confirmed
"I test the patch, the regression reduced to -2.9%"
[1] https://lore.kernel.org/lkml/20210520083144.GD14190@xsang-OptiPlex-9020/
[2] 8cc621d2f45d, mm: fs: invalidate BH LRU during page migration
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Minchan Kim <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Chris Goldsworthy <[email protected]>
Tested-by: "Xing, Zhengjun" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Building Linux for ppc64le with Ubuntu clang version
12.0.0-3ubuntu1~21.04.1 shows the warning below.
arch/powerpc/boot/inffast.c:20:1: warning: unused function 'get_unaligned16' [-Wunused-function]
get_unaligned16(const unsigned short *p)
^
1 warning generated.
Fix it by moving the check from the preprocessor to C, so the compiler
sees the use.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Paul Menzel <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Zhen Lei <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|