aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-18net: ll_temac: Add memory-barriers for TX BD accessEsben Haabendal1-1/+13
Add a couple of memory-barriers to ensure correct ordering of read/write access to TX BDs. In xmit_done, we should ensure that reading the additional BD fields are only done after STS_CTRL_APP0_CMPLT bit is set. When xmit_done marks the BD as free by setting APP0=0, we need to ensure that the other BD fields are reset first, so we avoid racing with the xmit path, which writes to the same fields. Finally, making sure to read APP0 of next BD after the current BD, ensures that we see all available buffers. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: ll_temac: Make sure to free skb when it is completely usedEsben Haabendal1-1/+5
With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18MAINTAINERS: add Guvenc as SMC maintainerKarsten Graul1-0/+1
Add Guvenc as maintainer for Shared Memory Communications (SMC) Sockets. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge branch 'bnxt_en-fixes'David S. Miller1-1/+7
Michael Chan says: ==================== bnxt_en: Bug fixes This patchset includes 3 small bug fixes to reinitialize PHY capabilities after firmware reset, setup the chip's internal TQM fastpath ring backing memory properly for RoCE traffic, and to free ethtool related memory if driver probe fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error pathSomnath Kotur1-0/+1
bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Fix TQM fastpath ring backing store computationRukhsana Ansari1-1/+1
TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Rediscover PHY capabilities after firmware resetMichael Chan1-0/+5
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18cxgb4: fix wrong shift.Pavel Machek1-1/+1
While fixing coverity warning, commit dd2c79677375 introduced typo in shift value. Fix that. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge tag 'arc-5.13-rc7-fixes' of ↵Linus Torvalds3-1/+45
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - ARCv2 userspace ABI not populating a few registers - Unbork CONFIG_HARDENED_USERCOPY for ARC * tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix CONFIG_HARDENED_USERCOPY ARCv2: save ABI registers across signal handling
2021-06-18Merge tag 'trace-v5.13-rc6' of ↵Linus Torvalds3-19/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Have recordmcount check for valid st_shndx otherwise some archs may have invalid references for the mcount location. - Two fixes done for mapping pids to task names. Traces were not showing the names of tasks when they should have. - Fix to trace_clock_global() to prevent it from going backwards * tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do no increment trace_clock_global() by one tracing: Do not stop recording comms if the trace file is being read tracing: Do not stop recording cmdlines when tracing is off recordmcount: Correct st_shndx handling
2021-06-18Merge tag 'printk-for-5.13-fixup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixup from Petr Mladek: "Fix misplaced EXPORT_SYMBOL(vsprintf)" * tag 'printk-for-5.13-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Move EXPORT_SYMBOL() closer to vprintk definition
2021-06-18Merge tag 'pm-5.13-rc7' of ↵Linus Torvalds4-245/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Remove recently added frequency invariance support from the CPPC cpufreq driver, because it has turned out to be problematic and it cannot be fixed properly on time for 5.13 (Viresh Kumar)" * tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpufreq: CPPC: Add support for frequency invariance"
2021-06-18Merge tag 'usb-5.13-rc7' of ↵Linus Torvalds3-3/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are three small USB fixes for reported problems for 5.13-rc7. They include: - disable autosuspend for a cypress USB hub - fix the battery charger detection for the chipidea driver - fix a kernel panic in the dwc3 driver due to a previous change in 5.13-rc1. All have been in linux-next with no reported problems" * tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: hub: Disable autosuspend for Cypress CY7C65632 usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection usb: dwc3: core: fix kernel panic when do reboot
2021-06-18x86/mm: Avoid truncating memblocks for SGX memoryFan Du1-1/+7
tl;dr: Several SGX users reported seeing the following message on NUMA systems: sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0. This turned out to be the memblock code mistakenly throwing away SGX memory. === Full Changelog === The 'max_pfn' variable represents the highest known RAM address. It can be used, for instance, to quickly determine for which physical addresses there is mem_map[] space allocated. The numa_meminfo code makes an effort to throw out ("trim") all memory blocks which are above 'max_pfn'. SGX memory is not considered RAM (it is marked as "Reserved" in the e820) and is not taken into account by max_pfn. Despite this, SGX memory areas have NUMA affinity and are enumerated in the ACPI SRAT table. The existing SGX code uses the numa_meminfo mechanism to look up the NUMA affinity for its memory areas. In cases where SGX memory was above max_pfn (usually just the one EPC section in the last highest NUMA node), the numa_memblock is truncated at 'max_pfn', which is below the SGX memory. When the SGX code tries to look up the affinity of this memory, it fails and produces an error message: sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0. and assigns the memory to NUMA node 0. Instead of silently truncating the memory block at 'max_pfn' and dropping the SGX memory, add the truncated portion to 'numa_reserved_meminfo'. This allows the SGX code to later determine the NUMA affinity of its 'Reserved' area. Before, numa_meminfo looked like this (from 'crash'): blk = { start = 0x0, end = 0x2080000000, nid = 0x0 } { start = 0x2080000000, end = 0x4000000000, nid = 0x1 } numa_reserved_meminfo is empty. With this, numa_meminfo looks like this: blk = { start = 0x0, end = 0x2080000000, nid = 0x0 } { start = 0x2080000000, end = 0x4000000000, nid = 0x1 } and numa_reserved_meminfo has an entry for node 1's SGX memory: blk = { start = 0x4000000000, end = 0x4080000000, nid = 0x1 } [ daveh: completely rewrote/reworked changelog ] Fixes: 5d30f92e7631 ("x86/NUMA: Provide a range-to-target_node lookup facility") Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20210617194657.0A99CB22@viggo.jf.intel.com
2021-06-18Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+10
Pull drm fixes from Dave Airlie: "Not much happening in fixes land this week only one PR for two amdgpu powergating fixes was waiting for me, maybe something will show up over the weekend, maybe not. amdgpu: - GFX9 and 10 powergating fixes" * tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell. drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
2021-06-18PCI: aardvark: Fix kernel panic during PIO transferPali Rohár1-9/+40
Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
2021-06-18PCI: Add AMD RS690 quirk to enable 64-bit DMAMikel Rychliski1-0/+44
Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations sometimes fail to configure the memory limit registers correctly. The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The sky2 driver programs the NIC to use 64-bit DMA, which will not work: sky2 0000:02:00.0: error interrupt status=0x8 sky2 0000:02:00.0 eth0: tx timeout sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0 Other drivers required by this mainboard either don't support 64-bit DMA, or have it disabled using driver specific quirks. For example, the ahci driver has quirks to enable or disable 64-bit DMA depending on the BIOS version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches against the SB600 SATA controller, but the real issue is almost certainly with the RS690 PCI host that it was commonly attached to. To avoid this issue in all drivers with 64-bit DMA support, fix the configuration of the PCI host. If the kernel is aware of physical memory above 4GB, but the BIOS never configured the PCI host with this information, update the registers with our values. [bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition] Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-18PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna1-0/+2
The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan1-1/+3
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni1-0/+12
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark TI C667X to avoid bus resetAntti Järvinen1-0/+10
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org
2021-06-18PCI: tegra194: Fix MCFG quirk build regressionsJon Hunter3-121/+128
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") caused a few build regressions: - 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so pcie-tegra.c can no longer be built as a module. Restore that rule. - 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native driver, but that's only set when the driver is built-in (for a module, CONFIG_PCIE_TEGRA194_MODULE is defined). The ACPI quirk is completely independent of the rest of the native driver, so move the quirk to its own file and remove the #ifdef in the native driver. - 7f100744749e added symbols that are always defined but used only when CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set: drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=] Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2021-06-18PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GBPunit Agrawal1-0/+2
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2 and ROCK Pi 4B, both based on the RK3399: pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] "BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI allocation code isn't smart enough to allocate it in a host bridge window marked as 64-bit, even though this should work fine. A DT host bridge description includes the windows from the CPU address space to the PCI bus space. On a few architectures (microblaze, powerpc, sparc), the DT may also describe PCI devices themselves, including their BARs. Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that some DT addresses described 64-bit windows and BARs. That was a problem because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the driver couldn't distinguish them. 9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge windows, which exposed the fact that the PCI allocator isn't smart enough to put 32-bit resources in those 64-bit windows. Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that information. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses") Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/ Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Reported-by: Qu Wenruo <wqu@suse.com> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Punit Agrawal <punitagrawal@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2021-06-18tracing: Do no increment trace_clock_global() by oneSteven Rostedt (VMware)1-3/+3
The trace_clock_global() tries to make sure the events between CPUs is somewhat in order. A global value is used and updated by the latest read of a clock. If one CPU is ahead by a little, and is read by another CPU, a lock is taken, and if the timestamp of the other CPU is behind, it will simply use the other CPUs timestamp. The lock is also only taken with a "trylock" due to tracing, and strange recursions can happen. The lock is not taken at all in NMI context. In the case where the lock is not able to be taken, the non synced timestamp is returned. But it will not be less than the saved global timestamp. The problem arises because when the time goes "backwards" the time returned is the saved timestamp plus 1. If the lock is not taken, and the plus one to the timestamp is returned, there's a small race that can cause the time to go backwards! CPU0 CPU1 ---- ---- trace_clock_global() { ts = clock() [ 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] <interrupted by NMI> trace_clock_global() { ts = clock() [ 999 ] if (ts < global_ts) ts = global_ts + 1 [ 1001 ] trylock(clock_lock) [ fail ] return ts [ 1001] } unlock(clock_lock); return ts; [ 1000 ] } trace_clock_global() { ts = clock() [ 1000 ] if (ts < global_ts) [ false 1000 == 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] unlock(clock_lock) return ts; [ 1000 ] } The above case shows to reads of trace_clock_global() on the same CPU, but the second read returns one less than the first read. That is, time when backwards, and this is not what is allowed by trace_clock_global(). This was triggered by heavy tracing and the ring buffer checker that tests for the clock going backwards: Ring buffer clock went backwards: 20613921464 -> 20613921463 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0 Modules linked in: [..] [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463 [20613915818] PAGE TIME STAMP [20613915818] delta:0 [20613915819] delta:1 [20613916035] delta:216 [20613916465] delta:430 [20613916575] delta:110 [20613916749] delta:174 [20613917248] delta:499 [20613917333] delta:85 [20613917775] delta:442 [20613917921] delta:146 [20613918321] delta:400 [20613918568] delta:247 [20613918768] delta:200 [20613919306] delta:538 [20613919353] delta:47 [20613919980] delta:627 [20613920296] delta:316 [20613920571] delta:275 [20613920862] delta:291 [20613921152] delta:290 [20613921464] delta:312 [20613921464] delta:0 TIME EXTEND [20613921464] delta:0 This happened more than once, and always for an off by one result. It also started happening after commit aafe104aa9096 was added. Cc: stable@vger.kernel.org Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18tracing: Do not stop recording comms if the trace file is being readSteven Rostedt (VMware)1-9/+0
A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18tracing: Do not stop recording cmdlines when tracing is offSteven Rostedt (VMware)1-2/+0
The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18recordmcount: Correct st_shndx handlingPeter Zijlstra1-5/+10
One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When SHN_XINDEX, then use .symtab_shndx. Otherwise use 0. This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX. Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/ Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [handle endianness of sym->st_shndx] Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18mac80211: handle various extensible elements correctlyJohannes Berg1-11/+11
Various elements are parsed with a requirement to have an exact size, when really we should only check that they have the minimum size that we need. Check only that and therefore ignore any additional data that they might carry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18mac80211: reset profile_periodicity/ema_apJohannes Berg1-0/+8
Apparently we never clear these values, so they'll remain set since the setting of them is conditional. Clear the values in the relevant other cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18cfg80211: avoid double free of PMSR requestAvraham Stern1-2/+14
If cfg80211_pmsr_process_abort() moves all the PMSR requests that need to be freed into a local list before aborting and freeing them. As a result, it is possible that cfg80211_pmsr_complete() will run in parallel and free the same PMSR request. Fix it by freeing the request in cfg80211_pmsr_complete() only if it is still in the original pmsr list. Cc: stable@vger.kernel.org Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18cfg80211: make certificate generation more robustJohannes Berg1-1/+1
If all net/wireless/certs/*.hex files are deleted, the build will hang at this point since the 'cat' command will have no arguments. Do "echo | cat - ..." so that even if the "..." part is empty, the whole thing won't hang. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18mac80211: minstrel_ht: fix sample time checkFelix Fietkau1-1/+1
We need to skip sampling if the next sample time is after jiffies, not before. This patch fixes an issue where in some cases only very little sampling (or none at all) is performed, leading to really bad data rates Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18powerpc/perf: Fix crash in perf_instruction_pointer() when ppmu is not setAthira Rajeev1-1/+1
On systems without any specific PMU driver support registered, running perf record causes Oops. The relevant portion from call trace: BUG: Kernel NULL pointer dereference on read at 0x00000040 Faulting instruction address: 0xc0021f0c Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K PREEMPT CMPCPRO SAF3000 DIE NOTIFICATION CPU: 0 PID: 442 Comm: null_syscall Not tainted 5.13.0-rc6-s3k-dev-01645-g7649ee3d2957 #5164 NIP: c0021f0c LR: c00e8ad8 CTR: c00d8a5c NIP perf_instruction_pointer+0x10/0x60 LR perf_prepare_sample+0x344/0x674 Call Trace: perf_prepare_sample+0x7c/0x674 (unreliable) perf_event_output_forward+0x3c/0x94 __perf_event_overflow+0x74/0x14c perf_swevent_hrtimer+0xf8/0x170 __hrtimer_run_queues.constprop.0+0x160/0x318 hrtimer_interrupt+0x148/0x3b0 timer_interrupt+0xc4/0x22c Decrementer_virt+0xb8/0xbc During perf record session, perf_instruction_pointer() is called to capture the sample IP. This function in core-book3s accesses ppmu->flags. If a platform specific PMU driver is not registered, ppmu is set to NULL and accessing its members results in a crash. Fix this crash by checking if ppmu is set. Fixes: 2ca13a4cc56c ("powerpc/perf: Use regs->nip when SIAR is zero") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1623952506-1431-1-git-send-email-atrajeev@linux.vnet.ibm.com
2021-06-18Merge tag 'amd-drm-fixes-5.13-2021-06-16' of ↵Dave Airlie2-2/+10
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-16: amdgpu: - GFX9 and 10 powergating fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616204913.4368-1-alexander.deucher@amd.com
2021-06-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-30/+73
Pull kvm fixes from Paolo Bonzini: "Miscellaneous bugfixes. The main interesting one is a NULL pointer dereference reported by syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM flag is cleared")" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Fix kvm_check_cap() assertion KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU KVM: X86: Fix x86_emulator slab cache leak KVM: SVM: Call SEV Guest Decommission if ASID binding fails KVM: x86: Immediately reset the MMU context when the SMM flag is cleared KVM: x86: Fix fall-through warnings for Clang KVM: SVM: fix doc warnings KVM: selftests: Fix compiling errors when initializing the static structure kvm: LAPIC: Restore guard to prevent illegal APIC register access
2021-06-17net: qed: Fix memcpy() overflow of qed_dcbx_params()Kees Cook1-1/+3
The source (&dcbx_info->operational.params) and dest (&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params (560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used as the memcpy() size. However it seems that struct qed_dcbx_operational_params (dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params (p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte for "valid"). On the assumption that the size is wrong (rather than the source structure type), adjust the memcpy() size argument to be 4 bytes smaller and add a BUILD_BUG_ON() to validate any changes to the structure sizes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: cdc_eem: fix tx fixup skb leakLinyu Yuan1-1/+1
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)") Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17Merge tag 'mlx5-fixes-2021-06-16' of ↵David S. Miller8-14/+49
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-06-16 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: hamradio: fix memory leak in mkiss_closePavel Skripkin1-0/+1
My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17be2net: Fix an error handling path in 'be_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: d6b6d9877878 ("be2net: use PCIe AER capability") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17KVM: selftests: Fix kvm_check_cap() assertionFuad Tabba1-1/+1
KVM_CHECK_EXTENSION ioctl can return any negative value on error, and not necessarily -1. Change the assertion to reflect that. Signed-off-by: Fuad Tabba <tabba@google.com> Message-Id: <20210615150443.1183365-1-tabba@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17Merge tag 'fixes_for_v5.13-rc7' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and fanotify fixes from Jan Kara: "A fixup finishing disabling of quotactl_path() syscall (I've missed archs using different way to declare syscalls) and a fix of an fd leak in error handling path of fanotify" * tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: finish disable quotactl_path syscall fanotify: fix copy_event_to_user() fid error clean up
2021-06-17usb: core: hub: Disable autosuspend for Cypress CY7C65632Andrew Lunn1-0/+7
The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17Merge tag 'irqchip-fixes-5.13-2' of ↵Thomas Gleixner1-1/+35
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 NMI handling where an IRQ could be mistakenly handled as a NMI, with disatrous effects Link: https://lore.kernel.org/r/20210610171127.2404752-1-maz@kernel.org
2021-06-17btrfs: zoned: fix negative space_info->bytes_readonlyNaohiro Aota1-4/+4
Consider we have a using block group on zoned btrfs. |<- ZU ->|<- used ->|<---free--->| `- Alloc offset ZU: Zone unusable Marking the block group read-only will migrate the zone unusable bytes to the read-only bytes. So, we will have this. |<- RO ->|<- used ->|<--- RO --->| RO: Read only When marking it back to read-write, btrfs_dec_block_group_ro() subtracts the above "RO" bytes from the space_info->bytes_readonly. And, it moves the zone unusable bytes back and again subtracts those bytes from the space_info->bytes_readonly, leading to negative bytes_readonly. This can be observed in the output as eg.: Data, single: total=512.00MiB, used=165.21MiB, zone_unusable=16.00EiB Data, single: total=536870912, used=173256704, zone_unusable=18446744073603186688 This commit fixes the issue by reordering the operations. Link: https://github.com/naota/linux/issues/37 Reported-by: David Sterba <dsterba@suse.com> Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones") CC: stable@vger.kernel.org # 5.12+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-16net/mlx5: Reset mkey index on creationAya Levin1-1/+1
Reset only the index part of the mkey and keep the variant part. On devlink reload, driver recreates mkeys, so the mkey index may change. Trying to preserve the variant part of the mkey, driver mistakenly merged the mkey index with current value. In case of a devlink reload, current value of index part is dirty, so the index may be corrupted. Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5e: Don't create devices during unload flowDmytro Linkin2-0/+8
Running devlink reload command for port in switchdev mode cause resources to corrupt: driver can't release allocated EQ and reclaim memory pages, because "rdma" auxiliary device had add CQs which blocks EQ from deletion. Erroneous sequence happens during reload-down phase, and is following: 1. detach device - suspends auxiliary devices which support it, destroys others. During this step "eth-rep" and "rdma-rep" are destroyed, "eth" - suspended. 2. disable SRIOV - moves device to legacy mode; as part of disablement - rescans drivers. This step adds "rdma" auxiliary device. 3. destroy EQ table - <failure>. Driver shouldn't create any device during unload flows. To handle that implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset on device attach. If flag is set do no-op on drivers rescan. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: DR, Fix STEv1 incorrect L3 decapsulation paddingAlex Vesker1-10/+16
Decapsulation L3 on small inner packets which are less than 64 Bytes was done incorrectly. In small packets there is an extra padding added in L2 which should not be included in L3 length. The issue was that after decapL3 the extra L2 padding caused an update on the L3 length. To avoid this issue the new header is pushed to the beginning of the packet (offset 0) which should not cause a HW reparse and update the L3 length. Fixes: c349b4137cfd ("net/mlx5: DR, Add STEv1 modify header logic") Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: SF_DEV, remove SF device on invalid stateParav Pandit1-0/+1
When auxiliary bus autoprobe is disabled and SF is in ACTIVE state, on SF port deletion it transitions from ACTIVE->ALLOCATED->INVALID. When VHCA event handler queries the state, it is already transition to INVALID state. In this scenario, event handler missed to delete the SF device. Fix it by deleting the SF when SF state is INVALID. Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Powered by cgit, Gruvboxed by Blaster4385.