Age | Commit message (Collapse) | Author | Files | Lines |
|
rbd_dev->opts is used to distinguish between the image that is being
mapped and a parent. However, because we no longer establish watch for
read-only mappings, this test is imprecise and results in unnecessary
rbd_unregister_watch() calls.
Make it consistent with need_watch in rbd_dev_image_probe().
Fixes: b9ef2b8858a0 ("rbd: don't establish watch for read-only mappings")
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Jason Dillaman <[email protected]>
|
|
rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().
However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch(). This is racy because a header update notify
can sneak in:
"rbd unmap" thread ceph-watch-notify worker
rbd_dev_image_release()
rbd_dev_unprobe()
free and zero out header
rbd_watch_cb()
rbd_dev_refresh()
rbd_dev_header_info()
read in header
The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors. In both cases this results in a memory
leak.
Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()")
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Jason Dillaman <[email protected]>
|
|
rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map". If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().
Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.
Fixes: 811c66887746 ("rbd: fix rbd map vs notify races")
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Jason Dillaman <[email protected]>
|
|
The sensorhub->push_data[] array has sensorhub->sensor_num elements.
It's allocated in cros_ec_sensorhub_ring_add(). So the > should be >=
to prevent a read one element beyond the end of the array.
Fixes: 145d59baff59 ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
|
|
s/mvmeta/mvneta/
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
mptcp_connect/28740 is trying to release lock (sk_lock-AF_INET) at:
[<ffffffff82c15869>] mptcp_poll+0xb9/0x550
but there are no more locks to release!
Call Trace:
lock_release+0x50f/0x750
release_sock+0x171/0x1b0
mptcp_poll+0xb9/0x550
sock_poll+0x157/0x470
? get_net_ns+0xb0/0xb0
do_sys_poll+0x63c/0xdd0
Problem is that __mptcp_tcp_fallback() releases the mptcp socket lock,
but after recent change it doesn't do this in all of its return paths.
To fix this, remove the unlock from __mptcp_tcp_fallback() and
always do the unlock in the caller.
Also add a small comment as to why we have this
__mptcp_needs_tcp_fallback().
Fixes: 0b4f33def7bbde ("mptcp: fix tcp fallback crash")
Reported-by: [email protected]
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This allows netif_receive_generic_xdp() to correctly determine the RX
queue from which the skb is coming, so that the context passed to the
XDP program will contain the correct RX queue index.
Signed-off-by: Gilberto Bertin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: a646d6ec9098 ("soc: qcom: ipa: modem and microcontroller")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The variable tmp64 is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
This was entirely scripted:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
They are all supposed to be sorted, but people who add new entries don't
always know the alphabet. Plus sometimes the entry names get edited,
and people don't then re-order the entry.
Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time. Fingers crossed.
This was scripted with
/scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS
but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.
Requested-by: Joe Perches <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of three patches to fix the fallout of the newly added split
lock detection feature.
It addressed the case where a KVM guest triggers a split lock #AC and
KVM reinjects it into the guest which is not prepared to handle it.
Add proper sanity checks which prevent the unconditional injection
into the guest and handles the #AC on the host side in the same way as
user space detections are handled. Depending on the detection mode it
either warns and disables detection for the task or kills the task if
the mode is set to fatal"
* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
KVM: x86: Emulate split-lock access as a write in emulator
x86/split_lock: Provide handle_guest_split_lock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes/updates from Thomas Gleixner:
- Deduplicate the average computations in the scheduler core and the
fair class code.
- Fix a raise between runtime distribution and assignement which can
cause exceeding the quota by up to 70%.
- Prevent negative results in the imbalanace calculation
- Remove a stale warning in the workqueue code which can be triggered
since the call site was moved out of preempt disabled code. It's a
false positive.
- Deduplicate the print macros for procfs
- Add the ucmap values to the SCHED_DEBUG procfs output for completness
* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Add task uclamp values to SCHED_DEBUG procfs
sched/debug: Factor out printing formats into common macros
sched/debug: Remove redundant macro define
sched/core: Remove unused rq::last_load_update_tick
workqueue: Remove the warning in wq_worker_sleeping()
sched/fair: Fix negative imbalance in imbalance calculation
sched/fair: Fix race between runtime distribution and assignment
sched/fair: Align rq->avg_idle and rq->avg_scan_cost
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes/updates for perf:
- Fix the perf event cgroup tracking which tries to track the cgroup
even for disabled events.
- Add Ice Lake server support for uncore events
- Disable pagefaults when retrieving the physical address in the
sampling code"
* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Disable page faults when getting phys address
perf/x86/intel/uncore: Add Ice Lake server uncore support
perf/cgroup: Correct indirection in perf_less_group_idx()
perf/core: Fix event cgroup tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three small fixes/updates for the locking core code:
- Plug a task struct reference leak in the percpu rswem
implementation.
- Document the refcount interaction with PID_MAX_LIMIT
- Improve the 'invalid wait context' data dump in lockdep so it
contains all information which is required to decode the problem"
* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Improve 'invalid wait context' splat
locking/refcount: Document interaction with PID_MAX_LIMIT
locking/percpu-rwsem: Fix a task_struct refcount
|
|
Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:
- five RDMA (smbdirect) related fixes
- add experimental support for swap over SMB3 mounts
- also a fix which improves performance of signed connections"
* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: enable swap on SMB3 mounts
smb3: change noisy error message to FYI
smb3: smbdirect support can be configured by default
cifs: smbd: Do not schedule work to send immediate packet on every receive
cifs: smbd: Properly process errors on ib_post_send
cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
cifs: smbd: Check send queue size before posting a send
cifs: smbd: Merge code to track pending packets
cifs: ignore cached share root handle closing errors
|
|
Pull NFS client bugfix from Trond Myklebust:
"Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"
* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS: Fix RCU lock leakage
|
|
The negotiation of flow control / pause frame modes was broken since
commit fcf1f59afc67 ("net: phy: marvell: rearrange to use
genphy_read_lpa()") moved the setting of phydev->duplex below the
phy_resolve_aneg_pause call. Due to a check of DUPLEX_FULL in that
function, phydev->pause was no longer set.
Fix it by moving the parsing of the status variable before the blocks
dealing with the pause frames.
As the Marvell 88E1510 datasheet does not specify the timing between the
link status and the "Speed and Duplex Resolved" bit, we have to force
the link down as long as the resolved bit is not set, to avoid reporting
link up before we even have valid Speed/Duplex.
Tested with a Marvell 88E1510 (RGMII to Copper/1000Base-T)
Fixes: fcf1f59afc67 ("net: phy: marvell: rearrange to use genphy_read_lpa()")
Signed-off-by: Clemens Gruber <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
- Remove [email protected] from MAINTAINERS
- remove 'resetvalue' property
- rename 'altr,gpio-bank-width' -> 'altr,ngpio'
- enable the common clk subsystem on Nios2
* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
MAINTAINERS: Remove [email protected]
arch: nios2: remove 'resetvalue' property
arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
arch: nios2: Enable the common clk subsystem on Nios2
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- fix an integer truncation in dma_direct_get_required_mask
(Kishon Vijay Abraham)
- fix the display of dma mapping types (Grygorii Strashko)
* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix displaying of dma allocation type
dma-direct: fix data truncation in dma_direct_get_required_mask()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
|
I do not longer work for credativ Germany.
Please, use my private email address instead.
This is for the case when people want to CC me on
patches sent from my old business email address.
Signed-off-by: Sedat Dilek <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
When sysctl_record_panic_msg is not set, the panic will
not be reported to Hyper-V via hyperv_report_panic_msg().
So the crash should be reported via hyperv_report_panic().
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <[email protected]>
Signed-off-by: Tianyu Lan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
We want to notify Hyper-V when a Linux guest VM crash occurs, so
there is a record of the crash even when kdump is enabled. But
crash_kexec_post_notifiers defaults to "false", so the kdump kernel
runs before the notifiers and Hyper-V never gets notified. Fix this by
always setting crash_kexec_post_notifiers to be true for Hyper-V VMs.
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <[email protected]>
Signed-off-by: Tianyu Lan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
When a guest VM panics, Hyper-V should be notified only once via the
crash synthetic MSRs. Current Linux code might write these crash MSRs
twice during a system panic:
1) hyperv_panic/die_event() calling hyperv_report_panic()
2) hv_kmsg_dump() calling hyperv_report_panic_msg()
Fix this by not calling hyperv_report_panic() if a kmsg dump has been
successfully registered. The notification will happen later via
hyperv_report_panic_msg().
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Reviewed-by: Michael Kelley <[email protected]>
Signed-off-by: Tianyu Lan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.
Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC
Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.
If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.
[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Xiaoyao Li <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].
More discussion can be found at [2][3].
[1] https://lkml.kernel.org/r/[email protected]
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Xiaoyao Li <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.
It will inject the #AC blindly into the guest whether the guest is
prepared or not.
Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.
[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
The keyword here is 'twice' to explain the trick.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Add the full net DIM API to the net_dim.rst file.
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert the Dynamic Interrupt Moderation doc to RST and
use the RST features like syntax highlight, function and
structure documentation, enumerations, table of contents.
Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
|
|
Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"
* tag 'docs-5.7-2' of git://git.lwn.net/linux:
Documentation: android: binderfs: add 'stats' mount option
Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
docs: driver-api: address duplicate label warning
Documentation: sysrq: fix RST formatting
docs: kernel-parameters.txt: Fix broken references
docs: kernel-parameters.txt: Remove nompx
docs: filesystems: fix typo in qnx6.rst
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
|
|
Pull xtensa updates from Max Filippov:
- replace setup_irq() by request_irq()
- cosmetic fixes in xtensa Kconfig and boot/Makefile
* tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa:
arch/xtensa: fix grammar in Kconfig help text
xtensa: remove meaningless export ccflags-y
xtensa: replace setup_irq() by request_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- two cleanups
- fix a boot regression introduced in this merge window
- fix wrong use of memory allocation flags
* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix booting 32-bit pv guest
x86/xen: make xen_pvmmu_arch_setup() static
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
xen: Use evtchn_type_t as a type for event channels
|
|
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Waiman Long <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Peter Oberparleiter <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Waiman Long <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "seq_file .next functions should increase position index".
In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed. A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps. This will always show the whole
last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition 4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition 4194812 97536 -2
/dev/dm-0 partition 4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*
I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly
https://bugzilla.kernel.org/show_bug.cgi?id=206283
This patch (of 4):
Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.
[[email protected]: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Waiman Long <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes: 6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <[email protected]>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Jon Hunter <[email protected]>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Joe Perches <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.
Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".
Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: NeilBrown <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: NeilBrown <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[[email protected]: v5]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: NeilBrown <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Jessica Yu <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: <[email protected]> [4.13+]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|