aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-26Merge tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds7-59/+88
Pull ksmbd server fixes from Steve French: - fixes for two possible out of bounds access (in negotiate, and in decrypt msg) - fix unsigned compared to zero warning - fix path lookup crossing a mountpoint - fix case when first compound request is a tree connect - fix memory leak if reads are compounded * tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix out of bounds in init_smb2_rsp_hdr() ksmbd: no response from compound read ksmbd: validate session id and tree id in compound request ksmbd: fix out of bounds in smb3_decrypt_req() ksmbd: check if a mount point is crossed during path lookup ksmbd: Fix unsigned expression compared with zero
2023-07-26ALSA: usb-audio: Update for native DSD support quirksJussi Laako1-6/+28
Maintenance patch for native DSD support. Remove incorrect T+A device quirks. Move set of device quirks to vendor quirks. Add set of missing device and vendor quirks. Signed-off-by: Jussi Laako <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-07-26mm: suppress mm fault logging if fatal signal already pendingLinus Torvalds1-0/+4
Commit eda0047296a1 ("mm: make the page fault mmap locking killable") intentionally made it much easier to trigger the "page fault fails because a fatal signal is pending" situation, by having the mmap locking fail early in that case. We have long aborted page faults in other fatal cases when the actual IO for a page is interrupted by SIGKILL - which is particularly useful for the traditional case of NFS hanging due to network issues, but local filesystems could cause it too if you happened to get the SIGKILL while waiting for a page to be faulted in (eg lock_folio_maybe_drop_mmap()). So aborting the page fault wasn't a new condition - but it now triggers earlier, before we even get to 'handle_mm_fault()'. And as a result the error doesn't go through our 'fault_signal_pending()' logic, and doesn't get filtered away there. Normally you'd never even notice, because if a fatal signal is pending, the new SIGSEGV we send ends up being ignored anyway. But it turns out that there is one very noticeable exception: if you enable 'show_unhandled_signals', the aborted page fault will be logged in the kernel messages, and you'll get a scary line looking something like this in your logs: pverados[2183248]: segfault at 55e5a00f9ae0 ip 000055e5a00f9ae0 sp 00007ffc0720bea8 error 14 in perl[55e5a00d4000+195000] likely on CPU 10 (core 4, socket 0) which is rather misleading. It's not really a segfault at all, it's just "the thread was killed before the page fault completed, so we aborted the page fault". Fix this by just making it clear that a pending fatal signal means that any new signal coming in after that is implicitly handled. This will avoid the misleading logging, since now the signal isn't 'unhandled' any more. Reported-and-tested-by: Fiona Ebner <[email protected]> Tested-by: Thomas Lamprecht <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Acked-by: Oleg Nesterov <[email protected]> Fixes: eda0047296a1 ("mm: make the page fault mmap locking killable") Signed-off-by: Linus Torvalds <[email protected]>
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark1-1/+1
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-26arm64/sme: Set new vector length before reallocatingMark Brown1-2/+2
As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes") Signed-off-by: Mark Brown <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-07-26arm64/fpsimd: Don't flush SME register hardware state along with threadMark Brown1-1/+0
We recently changed the fpsimd thread flush to flush the physical SME state as well as the thread state for the current thread. Unfortunately this leads to intermittent corruption in interaction with the lazy FPSIMD register switching. When under heavy load such as can be triggered by the startup phase of fp-stress it is possible that the current thread may not be scheduled prior to returning to userspace, and indeed we may end up returning to the last thread that was scheduled on the PE without ever exiting the kernel to any other task. If that happens then we will not reload the register state from memory, leading to loss of any SME register state. Since this was purely an attempt to defensively close off potential problems revert the change. Fixes: af3215fd0230 ("arm64/fpsimd: Exit streaming mode when flushing tasks") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-07-26netfilter: nf_tables: disallow rule addition to bound chain via ↵Pablo Neira Ayuso1-2/+3
NFTA_RULE_CHAIN_ID Bail out with EOPNOTSUPP when adding rule to bound chain via NFTA_RULE_CHAIN_ID. The following warning splat is shown when adding a rule to a deleted bound chain: WARNING: CPU: 2 PID: 13692 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] CPU: 2 PID: 13692 Comm: chain-bound-rul Not tainted 6.1.39 #1 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Reported-by: Kevin Rich <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-07-26netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERRORPablo Neira Ayuso1-9/+18
On error when building the rule, the immediate expression unbinds the chain, hence objects can be deactivated by the transaction records. Otherwise, it is possible to trigger the following warning: WARNING: CPU: 3 PID: 915 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] CPU: 3 PID: 915 Comm: chain-bind-err- Not tainted 6.1.39 #1 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables] Fixes: 4bedf9eee016 ("netfilter: nf_tables: fix chain binding transaction logic") Reported-by: Kevin Rich <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-07-26netfilter: nft_set_rbtree: fix overlap expiration walkFlorian Westphal1-6/+14
The lazy gc on insert that should remove timed-out entries fails to release the other half of the interval, if any. Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0 in nftables.git and kmemleak enabled kernel. Second bug is the use of rbe_prev vs. prev pointer. If rbe_prev() returns NULL after at least one iteration, rbe_prev points to element that is not an end interval, hence it should not be removed. Lastly, check the genmask of the end interval if this is active in the current generation. Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <[email protected]>
2023-07-26rbd: retrieve and check lock owner twice before blocklistingIlya Dryomov1-2/+23
An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: [email protected] # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: [email protected] # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: [email protected] Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26rbd: harden get_lock_owner_info() a bitIlya Dryomov2-6/+16
- we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26rbd: make get_lock_owner_info() return a single locker or NULLIlya Dryomov1-33/+51
Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26btrfs: check for commit error at btrfs_attach_transaction_barrier()Filipe Manana1-2/+7
btrfs_attach_transaction_barrier() is used to get a handle pointing to the current running transaction if the transaction has not started its commit yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit has started, then we wait for the transaction to commit and finish before returning - however we completely ignore if the transaction was aborted due to some error during its commit, we simply return ERR_PT(-ENOENT), which makes the caller assume everything is fine and no errors happened. This could make an fsync return success (0) to user space when in fact we had a transaction abort and the target inode changes were therefore not persisted. Fix this by checking for the return value from btrfs_wait_for_commit(), and if it returned an error, return it back to the caller. Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction") CC: [email protected] # 4.19+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-07-26igc: Fix Kernel Panic during ndo_tx_timeout callbackMuhammad Husaini Zulkifli1-12/+28
The Xeon validation group has been carrying out some loaded tests with various HW configurations, and they have seen some transmit queue time out happening during the test. This will cause the reset adapter function to be called by igc_tx_timeout(). Similar race conditions may arise when the interface is being brought down and up in igc_reinit_locked(), an interrupt being generated, and igc_clean_tx_irq() being called to complete the TX. When the igc_tx_timeout() function is invoked, this patch will turn off all TX ring HW queues during igc_down() process. TX ring HW queues will be activated again during the igc_configure_tx_ring() process when performing the igc_up() procedure later. This patch also moved existing igc_disable_tx_ring_hw() to avoid using forward declaration. Kernel trace: [ 7678.747813] ------------[ cut here ]------------ [ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out [ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0 [ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0 [ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c 89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e 89 c0 48 0f a3 05 0a c1 [ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282 [ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000 [ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880 [ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb [ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000 [ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18 [ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8 [ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 7679.379370] PKRU: 55555554 [ 7679.386446] Call Trace: [ 7679.393152] <TASK> [ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10 [ 7679.407870] call_timer_fn+0x31/0x110 [ 7679.415698] expire_timers+0xb2/0x120 [ 7679.423403] run_timer_softirq+0x179/0x1e0 [ 7679.431532] ? __schedule+0x2b1/0x820 [ 7679.439078] __do_softirq+0xd1/0x295 [ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 7679.454867] run_ksoftirqd+0x22/0x30 [ 7679.462058] smpboot_thread_fn+0xb7/0x160 [ 7679.469670] kthread+0xcd/0xf0 [ 7679.476097] ? __pfx_kthread+0x10/0x10 [ 7679.483211] ret_from_fork+0x29/0x50 [ 7679.490047] </TASK> [ 7679.495204] ---[ end trace 0000000000000000 ]--- [ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump [ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value [ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641 [ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683 [ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040 [ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800 [ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081 [ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022 [ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031 [ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030 [ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808 [ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000 [ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa [ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000 [ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108 [ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter [ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8086.945561] ------------[ cut here ]------------ Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0 Oops: (null) due to oops @ 0xffffffff81573888 RIP: 0010:dql_completed+0x148/0x160 Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? igc_poll+0x1a9/0x14d0 [igc] __napi_poll+0x2e/0x1b0 net_rx_action+0x126/0x250 __do_softirq+0xd1/0x295 irq_exit_rcu+0xc5/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 cpuidle_enter+0x2e/0x50 call_cpuidle+0x23/0x40 do_idle+0x1be/0x220 cpu_startup_entry+0x20/0x30 rest_init+0xb5/0xc0 arch_call_rest_init+0xe/0x30 start_kernel+0x448/0x760 x86_64_start_kernel+0x109/0x150 secondary_startup_64_no_verify+0xe0/0xeb </TASK> more> [0]kdb> [0]kdb> [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, type go a second time if you really want to continue [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, attempting to continue [ 8086.955689] refcount_t: underflow; use-after-free. [ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110 [ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110 [ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81 48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d 42 c6 eb 00 00 0f 85 59 ff ff ff 48 [ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286 [ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888 [ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880 [ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28 [ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000 [ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00 [ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955804] PKRU: 55555554 [ 8086.955805] Call Trace: [ 8086.955806] <IRQ> [ 8086.955808] tcp_wfree+0x112/0x130 [ 8086.955814] skb_release_head_state+0x24/0xa0 [ 8086.955818] napi_consume_skb+0x9c/0x160 [ 8086.955821] igc_poll+0x5d8/0x14d0 [igc] [ 8086.955835] __napi_poll+0x2e/0x1b0 [ 8086.955839] net_rx_action+0x126/0x250 [ 8086.955843] __do_softirq+0xd1/0x295 [ 8086.955846] irq_exit_rcu+0xc5/0xf0 [ 8086.955851] common_interrupt+0x86/0xa0 [ 8086.955857] </IRQ> [ 8086.955857] <TASK> [ 8086.955858] asm_common_interrupt+0x27/0x40 [ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955875] cpuidle_enter+0x2e/0x50 [ 8086.955880] call_cpuidle+0x23/0x40 [ 8086.955884] do_idle+0x1be/0x220 [ 8086.955887] cpu_startup_entry+0x20/0x30 [ 8086.955889] rest_init+0xb5/0xc0 [ 8086.955892] arch_call_rest_init+0xe/0x30 [ 8086.955895] start_kernel+0x448/0x760 [ 8086.955898] x86_64_start_kernel+0x109/0x150 [ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955904] </TASK> [ 8086.955904] ---[ end trace 0000000000000000 ]--- [ 8086.955912] ------------[ cut here ]------------ [ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27! [ 8086.955918] invalid opcode: 0000 [#1] SMP [ 8086.955922] RIP: 0010:dql_completed+0x148/0x160 [ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc [ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 [ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 [ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 [ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 [ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 [ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 [ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955938] PKRU: 55555554 [ 8086.955939] Call Trace: [ 8086.955939] <IRQ> [ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc] [ 8086.955949] __napi_poll+0x2e/0x1b0 [ 8086.955952] net_rx_action+0x126/0x250 [ 8086.955956] __do_softirq+0xd1/0x295 [ 8086.955958] irq_exit_rcu+0xc5/0xf0 [ 8086.955961] common_interrupt+0x86/0xa0 [ 8086.955964] </IRQ> [ 8086.955965] <TASK> [ 8086.955965] asm_common_interrupt+0x27/0x40 [ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955978] cpuidle_enter+0x2e/0x50 [ 8086.955981] call_cpuidle+0x23/0x40 [ 8086.955984] do_idle+0x1be/0x220 [ 8086.955985] cpu_startup_entry+0x20/0x30 [ 8086.955987] rest_init+0xb5/0xc0 [ 8086.955990] arch_call_rest_init+0xe/0x30 [ 8086.955992] start_kernel+0x448/0x760 [ 8086.955994] x86_64_start_kernel+0x109/0x150 [ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955998] </TASK> [ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs [16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs [16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs [16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs [16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs [16762.543784] ---[ end trace 0000000000000000 ]--- [16762.849099] RIP: 0010:dql_completed+0x148/0x160 PANIC: Fatal exception in interrupt Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <[email protected]> Signed-off-by: Muhammad Husaini Zulkifli <[email protected]> Acked-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-26net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi1-0/+6
The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2023-07-26net: dsa: qca8k: fix broken search_and_delChristian Marangi1-0/+4
On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2023-07-26net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi1-3/+6
On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2023-07-26net: dsa: qca8k: enable use_single_write for qca8xxxChristian Marangi1-2/+5
The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown <[email protected]> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2023-07-26xen/evtchn: Introduce new IOCTL to bind static evtchnRahul Singh4-21/+50
Xen 4.17 supports the creation of static evtchns. To allow user space application to bind static evtchns introduce new ioctl "IOCTL_EVTCHN_BIND_STATIC". Existing IOCTL doing more than binding that’s why we need to introduce the new IOCTL to only bind the static event channels. Static evtchns to be available for use during the lifetime of the guest. When the application exits, __unbind_from_irq() ends up being called from release() file operations because of that static evtchns are getting closed. To avoid closing the static event channel, add the new bool variable "is_static" in "struct irq_info" to mark the event channel static when creating the event channel to avoid closing the static evtchn. Also, take this opportunity to remove the open-coded version of the evtchn close in drivers/xen/evtchn.c file and use xen_evtchn_close(). Signed-off-by: Rahul Singh <[email protected]> Reviewed-by: Oleksandr Tyshchenko <[email protected]> Acked-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/ae7329bf1713f83e4aad4f3fa0f316258c40a3e9.1689677042.git.rahul.singh@arm.com Signed-off-by: Juergen Gross <[email protected]>
2023-07-25net: ipa: only reset hashed tables when supportedAlex Elder1-9/+11
Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. Cc: <[email protected]> # 6.1.x Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists") Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Alex Elder <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-25Merge branch 'net-fix-error-warning-by-fstrict-flex-arrays-3'Jakub Kicinski3-6/+8
Kuniyuki Iwashima says: ==================== net: Fix error/warning by -fstrict-flex-arrays=3. df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") started applying strict rules for standard string functions (strlen(), memcpy(), etc.) if CONFIG_FORTIFY_SOURCE=y. This series fixes two false positives caught by syzkaller. v2: https://lore.kernel.org/netdev/[email protected]/ v1: https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-25af_packet: Fix warning of fortified memcpy() in packet_getname().Kuniyuki Iwashima2-2/+6
syzkaller found a warning in packet_getname() [0], where we try to copy 16 bytes to sockaddr_ll.sll_addr[8]. Some devices (ip6gre, vti6, ip6tnl) have 16 bytes address expressed by struct in6_addr. Also, Infiniband has 32 bytes as MAX_ADDR_LEN. The write seems to overflow, but actually not since we use struct sockaddr_storage defined in __sys_getsockname() and its size is 128 (_K_SS_MAXSIZE) bytes. Thus, we have sufficient room after sll_addr[] as __data[]. To avoid the warning, let's add a flex array member union-ed with sll_addr. Another option would be to use strncpy() and limit the copied length to sizeof(sll_addr), but it will return the partial address and break an application that passes sockaddr_storage to getsockname(). [0]: memcpy: detected field-spanning write (size 16) of single field "sll->sll_addr" at net/packet/af_packet.c:3604 (size 8) WARNING: CPU: 0 PID: 255 at net/packet/af_packet.c:3604 packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604 Modules linked in: CPU: 0 PID: 255 Comm: syz-executor750 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604 lr : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604 sp : ffff800089887bc0 x29: ffff800089887bc0 x28: ffff000010f80f80 x27: 0000000000000003 x26: dfff800000000000 x25: ffff700011310f80 x24: ffff800087d55000 x23: dfff800000000000 x22: ffff800089887c2c x21: 0000000000000010 x20: ffff00000de08310 x19: ffff800089887c20 x18: ffff800086ab1630 x17: 20646c6569662065 x16: 6c676e697320666f x15: 0000000000000001 x14: 1fffe0000d56d7ca x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 3e60944c3da92b00 x8 : 3e60944c3da92b00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000898874f8 x4 : ffff800086ac99e0 x3 : ffff8000803f8808 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000000 Call trace: packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604 __sys_getsockname+0x168/0x24c net/socket.c:2042 __do_sys_getsockname net/socket.c:2057 [inline] __se_sys_getsockname net/socket.c:2054 [inline] __arm64_sys_getsockname+0x7c/0x94 net/socket.c:2054 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Reported-by: syzkaller <[email protected]> Suggested-by: Kees Cook <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-25af_unix: Fix fortify_panic() in unix_bind_bsd().Kuniyuki Iwashima1-4/+2
syzkaller found a bug in unix_bind_bsd() [0]. We can reproduce it by bind()ing a socket on a path with length 108. 108 is the size of sun_addr of struct sockaddr_un and is the maximum valid length for the pathname socket. When calling bind(), we use struct sockaddr_storage as the actual buffer size, so terminating sun_addr[108] with null is legitimate as done in unix_mkname_bsd(). However, strlen(sunaddr) for such a case causes fortify_panic() if CONFIG_FORTIFY_SOURCE=y. __fortify_strlen() has no idea about the actual buffer size and see the string as unterminated. Let's use strnlen() to allow sun_addr to be unterminated at 107. [0]: detected buffer overflow in __fortify_strlen kernel BUG at lib/string_helpers.c:1031! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 255 Comm: syz-executor296 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030 lr : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030 sp : ffff800089817af0 x29: ffff800089817af0 x28: ffff800089817b40 x27: 1ffff00011302f68 x26: 000000000000006e x25: 0000000000000012 x24: ffff800087e60140 x23: dfff800000000000 x22: ffff800089817c20 x21: ffff800089817c8e x20: 000000000000006c x19: ffff00000c323900 x18: ffff800086ab1630 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 x14: 1ffff00011302eb8 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 64a26b65474d2a00 x8 : 64a26b65474d2a00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800089817438 x4 : ffff800086ac99e0 x3 : ffff800080f19e8c x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000002c Call trace: fortify_panic+0x1c/0x20 lib/string_helpers.c:1030 _Z16__fortify_strlenPKcU25pass_dynamic_object_size1 include/linux/fortify-string.h:217 [inline] unix_bind_bsd net/unix/af_unix.c:1212 [inline] unix_bind+0xba8/0xc58 net/unix/af_unix.c:1326 __sys_bind+0x1ac/0x248 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __arm64_sys_bind+0x7c/0x94 net/socket.c:1801 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa0003e1 d0000e80 91030000 97ffc91a (d4210000) Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Reported-by: syzkaller <[email protected]> Suggested-by: Kees Cook <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-25macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFFLin Ma1-0/+1
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read. Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-25ovl: Always reevaluate the file signature for IMAEric Snowberg1-1/+1
Commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version") partially closed an IMA integrity issue when directly modifying a file on the lower filesystem. If the overlay file is first opened by a user and later the lower backing file is modified by root, but the extended attribute is NOT updated, the signature validation succeeds with the old original signature. Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to force signature reevaluation on every file access until a fine grained solution can be found. Signed-off-by: Eric Snowberg <[email protected]> Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-07-25x86/traps: Fix load_unaligned_zeropad() handling for shared TDX memoryKirill A. Shutemov1-7/+11
Commit c4e34dd99f2e ("x86: simplify load_unaligned_zeropad() implementation") changes how exceptions around load_unaligned_zeropad() handled. The kernel now uses the fault_address in fixup_exception() to verify the address calculations for the load_unaligned_zeropad(). It works fine for #PF, but breaks on #VE since no fault address is passed down to fixup_exception(). Propagating ve_info.gla down to fixup_exception() resolves the issue. See commit 1e7769653b06 ("x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page") for more context. Signed-off-by: Kirill A. Shutemov <[email protected]> Reported-by: Michael Kelley <[email protected]> Fixes: c4e34dd99f2e ("x86: simplify load_unaligned_zeropad() implementation") Acked-by: Dave Hansen <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-07-25Merge tag 'nfsd-6.5-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix TEST_STATEID response * tag 'nfsd-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Remove incorrect check in nfsd4_validate_stateid
2023-07-25drm/amdgpu: Restore HQD persistent state registerLijo Lazar1-1/+2
On GFX v9.4.3, compute queue MQD is populated using the values in HQD persistent state register. Hence don't clear the values on module unload, instead restore it to the default reset value so that MQD is initialized correctly during next module load. In particular, preload flag needs to be set on compute queue MQD, otherwise it could cause uninitialized values being used at device reset state resulting in EDC. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter1-1/+1
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: 4f6d9e38c4d2 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen1-0/+3
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Leo Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0Alvin Lee1-1/+4
[Description] It is not valid to set the WDIVIDER value to 0, so do not re-write to DISPCLK_WDIVIDER if the current value is 0 (i.e., it is at it's initial value and we have not made any requests to change DISPCLK yet). Reviewed-by: Saaem Rizvi <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Guard DCN31 PHYD32CLK logic against chip familyGeorge Shen1-1/+2
[Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr ClockJane Jian1-1/+1
Report current GFX clock also from average clock value as the original CurrClock data is not valid/accurate any more as per FW team Signed-off-by: Jane Jian <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd: Fix an error handling mistake in psp_sw_init()Mario Limonciello1-3/+3
If the second call to amdgpu_bo_create_kernel() fails, the memory allocated from the first call should be cleared. If the third call fails, the memory from the second call should be cleared. Fixes: b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init") Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)Victor Lu1-4/+1
An instance of for_each_inst() was not changed to match its new behaviour and is causing a loop. v2: remove tmp_mask variable Fixes: b579ea632fca ("drm/amdgpu: Modify for_each_inst macro") Signed-off-by: Victor Lu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdkfd: fix trap handling work around for debuggingJonathan Kim3-7/+10
Update the list of devices that require the cwsr trap handling workaround for debugging use cases. Signed-off-by: Jonathan Kim <[email protected]> Acked-by: Ruili Ji <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init()YueHaibing1-5/+0
Since commit 8e86dee02253 ("drm/fb-helper: Remove drm_fb_helper_defio_init() and update docs") this inline helper not used anymore. Fixes: 8e86dee02253 ("drm/fb-helper: Remove drm_fb_helper_defio_init() and update docs") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-25Merge tag 'm68k-for-v6.5-tag2' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: - Fix the build when using the toolchain in Debian unstable. * tag 'm68k-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix invalid .section syntax
2023-07-25dm cache policy smq: ensure IO doesn't prevent cleaner policy progressJoe Thornber1-10/+18
When using the cleaner policy to decommission the cache, there is never any writeback started from the cache as it is constantly delayed due to normal I/O keeping the device busy. Meaning @idle=false was always being passed to clean_target_met() Fix this by adding a specific 'cleaner' flag that is set when the cleaner policy is configured. This flag serves to always allow the cleaner's writeback work to be queued until the cache is decommissioned (even if the cache isn't idle). Reported-by: David Jeffery <[email protected]> Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: [email protected] Signed-off-by: Joe Thornber <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-07-25dm raid: protect md_stop() with 'reconfig_mutex'Yu Kuai2-1/+5
__md_stop_writes() and __md_stop() will modify many fields that are protected by 'reconfig_mutex', and all the callers will grab 'reconfig_mutex' except for md_stop(). Also, update md_stop() to make certain 'reconfig_mutex' is held using lockdep_assert_held(). Fixes: 9d09e663d550 ("dm: raid456 basic support") Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-07-25dm raid: clean up four equivalent goto tags in raid_ctr()Yu Kuai1-18/+9
There are four equivalent goto tags in raid_ctr(), clean them up to use just one. There is no functional change and this is preparation to fix raid_ctr()'s unprotected md_stop(). Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-07-25dm raid: fix missing reconfig_mutex unlock in raid_ctr() error pathsYu Kuai1-2/+7
In the error paths 'bad_stripe_cache' and 'bad_check_reshape', 'reconfig_mutex' is still held after raid_ctr() returns. Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target") Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-07-25dm integrity: fix double free on memory allocation failureMikulas Patocka1-0/+1
If the statement "recalc_tags = kvmalloc(recalc_tags_size, GFP_NOIO);" fails, we call "vfree(recalc_buffer)" and we jump to the label "oom". If the condition "recalc_sectors >= 1U << ic->sb->log2_sectors_per_block" is false, we jump to the label "free_ret" and call "vfree(recalc_buffer)" again, on an already released memory block. Fix the bug by setting "recalc_buffer = NULL" after freeing it. Fixes: da8b4fc1f63a ("dm integrity: only allocate recalculate buffer when needed") Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-07-25xenbus: check xen_domain in xenbus_probe_initcallStefano Stabellini1-0/+3
The same way we already do in xenbus_init. Fixes the following warning: [ 352.175563] Trying to free already-free IRQ 0 [ 352.177355] WARNING: CPU: 1 PID: 88 at kernel/irq/manage.c:1893 free_irq+0xbf/0x350 [...] [ 352.213951] Call Trace: [ 352.214390] <TASK> [ 352.214717] ? __warn+0x81/0x170 [ 352.215436] ? free_irq+0xbf/0x350 [ 352.215906] ? report_bug+0x10b/0x200 [ 352.216408] ? prb_read_valid+0x17/0x20 [ 352.216926] ? handle_bug+0x44/0x80 [ 352.217409] ? exc_invalid_op+0x13/0x60 [ 352.217932] ? asm_exc_invalid_op+0x16/0x20 [ 352.218497] ? free_irq+0xbf/0x350 [ 352.218979] ? __pfx_xenbus_probe_thread+0x10/0x10 [ 352.219600] xenbus_probe+0x7a/0x80 [ 352.221030] xenbus_probe_thread+0x76/0xc0 Fixes: 5b3353949e89 ("xen: add support for initializing xenstore later as HVM domain") Signed-off-by: Stefano Stabellini <[email protected]> Tested-by: Petr Mladek <[email protected]> Reviewed-by: Oleksandr Tyshchenko <[email protected]> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2307211609140.3118466@ubuntu-linux-20-04-desktop Signed-off-by: Juergen Gross <[email protected]>
2023-07-25platform/x86: huawei-wmi: Silence ambient light sensorKonstantin Shelekhin1-0/+2
Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022: ... [36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ... Fix that by ignoring events generated by ambient light sensor. This issue was reported on GitHub and resolved with the following merge request: https://github.com/aymanbagabas/Huawei-WMI/pull/70 I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list. Signed-off-by: Konstantin Shelekhin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100Maxim Mikityanskiy1-4/+4
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only (so far only MSI Wind U90/U100). There are, however, a few issues with the implementation: 1. The initial HW state is always unblocked, regardless of the actual state on boot, because msi_init_rfkill only sets the SW state, regardless of ec_read_only. 2. The initial SW state corresponds to the actual state on boot, but it can't be changed afterwards, because set_device_state returns -EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth unusable if it was blocked on boot, and breaking the airplane mode if the rfkill was unblocked on boot. Address the above issues by properly initializing the HW state on ec_read_only laptops and by allowing the userspace to toggle the SW state. Don't set the SW state ourselves and let the userspace fully control it. Toggling the SW state is a no-op, however, it allows the userspace to properly toggle the airplane mode. The actual SW radio disablement is handled by the corresponding rtl818x_pci and btusb drivers that have their own rfkills. Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130. Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one") Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support") Signed-off-by: Maxim Mikityanskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptopsKristian Angelov1-2/+12
This patch fixes setting the cmd values to 0xb3 and 0xb4. This is necessary on some TUF laptops in order to set the RGB mode. Closes: https://lore.kernel.org/platform-driver-x86/[email protected] Signed-off-by: Kristian Angelov <[email protected]> Reviewed-by: Luke D. Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86: think-lmi: Use kfree_sensitive instead of kfreeWang Ming1-2/+2
key might contain private part of the key, so better use kfree_sensitive to free it. Signed-off-by: Wang Ming <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirksMaxim Mikityanskiy1-0/+6
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS method. If VGBS is not called on boot, the firmware sends an initial 0xcd event shortly after calling the BTNL method, but only if the device is booted in the laptop mode. However, if the device is booted in the tablet mode and VGBS is not called, there is no initial 0xcc event, and the input device for SW_TABLET_MODE is not registered up until the user turns the device into the laptop mode. Call VGBS on boot on this device to get the initial state of SW_TABLET_MODE in a reliable way. Tested with BIOS 1.13.1. Signed-off-by: Maxim Mikityanskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86: intel: hid: Always call BTNL ACPI methodHans de Goede1-12/+9
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called. Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array. Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function. Reported-by: Maxim Mikityanskiy <[email protected]> Closes: https://lore.kernel.org/platform-driver-x86/[email protected]/ Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.