aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25platform/x86/amd/pmf: Notify OS power slider updateShyam Sundar S K4-6/+114
APMF fn8 can notify EC about the OS slider position change. Add this capability to the PMF driver so that it can call the APMF fn8 based on the changes in the Platform profile events. Co-developed-by: Mario Limonciello <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Patil Rajesh Reddy <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25platform/x86/amd/pmf: reduce verbosity of apmf_get_system_paramsShyam Sundar S K1-1/+1
apmf_get_system_params() failure is not a critical event, reduce its verbosity from dev_err to dev_dbg. Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-07-25ALSA: usb-audio: Add quirk for Microsoft Modern Wireless HeadsetTakashi Iwai2-0/+17
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft USB Link") has a playback and a capture mixer volume/switch, but they are fairly broken. The descriptor reports wrong dB ranges for playback, and the capture volume/switch don't influence on the actual recording at all. Moreover, there seem instabilities in the connection, and at best, we should disable the runtime PM. So this ended up with a quirk entry for: - Correct the playback dB range; I picked up some reasonable values but it's a guess work - Disable the capture mixer; it's completely useless and confuses PA/PW - Suppress get-sample-rate, apply the delay for message handling, and suppress the auto-suspend The behavior of the wheel control on the headset is somehow flaky, too, but it's an issue of HID. Link: https://bugzilla.suse.com/show_bug.cgi?id=1207129 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-07-25ALSA: hda/relatek: Enable Mute LED on HP 250 G8Luka Guzenko1-0/+1
This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling the mute LED. Enable already existing quirk for this device. Signed-off-by: Luka Guzenko <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-07-25ASoC: atmel: Fix the 8K sample parameter in I2SC masterGuiting Shen1-1/+4
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary). So use the 6.144Mhz instead of 12.288Mhz to support 8K sample. Signed-off-by: Guiting Shen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0Shuming Fan1-1/+9
When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoC: rt711: fix for JD event handling in ClockStop Mode0Shuming Fan1-1/+8
When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0Shuming Fan1-1/+9
When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0Shuming Fan1-1/+9
When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoc: codecs: ES8316: Fix DMIC configEdgar1-1/+1
According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 } Signed-off-by: Edgar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0Shuming Fan1-1/+8
When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-07-25net: stmmac: Apply redundant write work around on 4.xx tooVincent Whitchurch1-1/+3
commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ("net: stmmac: work around sporadic tx issue on link-up") worked around a problem with TX sometimes not working after a link-up by avoiding a redundant write to MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems with handling multiple writes to that register in some cases. That commit however only added the work around to dwmac_lib.c (apart from the common code in stmmac_main.c), but my systems with version 4.21a of the IP exhibit the same problem, so add the work around to dwmac4_lib.c too. Fixes: a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up") Signed-off-by: Vincent Whitchurch <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-07-25octeontx2-af: Fix hash extraction enable configurationSuman Ghosh2-5/+46
As of today, hash extraction support is enabled for all the silicons. Because of which we are facing initialization issues when the silicon does not support hash extraction. During creation of the hardware parsing table for IPv6 address, we need to consider if hash extraction is enabled then extract only 32 bit, otherwise 128 bit needs to be extracted. This patch fixes the issue and configures the hardware parser based on the availability of the feature. Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key") Signed-off-by: Suman Ghosh <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-07-25drm/i915: Fix an error handling path in igt_write_huge()Christophe JAILLET1-2/+4
All error handling paths go to 'out', except this one. Be consistent and also branch to 'out' here. Fixes: c10a652e239e ("drm/i915/selftests: Rework context handling in hugepages selftests") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7a036b88671312ee9adc01c74ef5b3376f690b76.1689619758.git.christophe.jaillet@wanadoo.fr (cherry picked from commit 361ecaadb1ce3c5312c7c4c419271326d43899eb) Signed-off-by: Tvrtko Ursulin <[email protected]>
2023-07-25drm/i915/dpt: Use shmem for dpt objectsRadhakrishna Sripada1-1/+3
Dpt objects that are created from internal get evicted when there is memory pressure and do not get restored when pinned during scanout. The pinned page table entries look corrupted and programming the display engine with the incorrect pte's result in DE throwing pipe faults. Create DPT objects from shmem and mark the object as dirty when pinning so that the object is restored when shrinker evicts an unpinned buffer object. v2: Unconditionally mark the dpt objects dirty during pinning(Chris). Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Cc: <[email protected]> # v6.0+ Cc: Ville Syrjälä <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Suggested-by: Chris Wilson <[email protected]> Signed-off-by: Fei Yang <[email protected]> Signed-off-by: Radhakrishna Sripada <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e91a777a6e602ba0e3366e053e4e094a334a1244) Signed-off-by: Tvrtko Ursulin <[email protected]>
2023-07-25Merge branch 'fix-up-dev-flags-when-add-p2p-down-link'Paolo Abeni2-0/+14
Hangbin Liu says: ==================== Fix up dev flags when add P2P down link When adding p2p interfaces to bond/team. The POINTOPOINT, NOARP flags are not inherit to up devices. Which will trigger IPv6 DAD. Since there is no ethernet MAC address for P2P devices. This will cause unexpected DAD failures. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-07-25team: reset team's flags when down link is P2P deviceHangbin Liu1-0/+9
When adding a point to point downlink to team device, we neglected to reset the team's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to team device. Fix this by remove multicast/broadcast flags and add p2p and noarp flags. After removing the none ethernet interface and adding an ethernet interface to team, we need to reset team interface flags. Unlike bonding interface, team do not need restore IFF_MASTER, IFF_SLAVE flags. Reported-by: Liang Li <[email protected]> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-07-25bonding: reset bond's flags when down link is P2P deviceHangbin Liu1-0/+5
When adding a point to point downlink to the bond, we neglected to reset the bond's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to the bonding. To address this issue, let's reset the bond's flags for P2P interfaces. Before fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188:: 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 brd 2006:70:10::2 inet6 fe80::200:ff:fe00:0/64 scope link valid_lft forever preferred_lft forever After fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9:: 8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 inet6 fe80::1/64 scope link valid_lft forever preferred_lft forever Reported-by: Liang Li <[email protected]> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-07-24block: Fix a source code comment in include/uapi/linux/blkzoned.hBart Van Assche1-5/+5
Fix the symbolic names for zone conditions in the blkzoned.h header file. Cc: Hannes Reinecke <[email protected]> Cc: Damien Le Moal <[email protected]> Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-24Merge branch '40GbE' of ↵Jakub Kicinski2-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf) This series contains updates to i40e and iavf drivers. Wang Ming corrects an error check on i40e. Jake unlocks crit_lock on allocation failure to prevent deadlock and stops re-enabling of interrupts when it's not intended for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED iavf: fix potential deadlock on allocation failure i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24Merge tag 'linux-can-fixes-for-6.5-20230724' of ↵Jakub Kicinski2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-07-24 The first patch is by me and adds a missing set of CAN state to CAN_STATE_STOPPED on close in the gs_usb driver. The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN raw protocol. * tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: raw: fix lockdep issue in raw_release() can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24ice: Fix memory management in ice_ethtool_fdir.cJedrzej Jagielski1-12/+14
Fix ethtool FDIR logic to not use memory after its release. In the ice_ethtool_fdir.c file there are 2 spots where code can refer to pointers which may be missing. In the ice_cfg_fdir_xtrct_seq() function seg may be freed but even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)). In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input may first fail to be added via ice_fdir_update_list_entry() but then may be deleted by ice_fdir_update_list_entry. Terminate in both cases when the returned value of the previous operation is other than 0, free memory and don't use it anymore. Reported-by: Michal Schmidt <[email protected]> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423 Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters") Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24tcp: Reduce chance of collisions in inet6_hashfn().Stewart Smith1-6/+2
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash table with a hash over the source & destination addresses and ports. However, the IPv6 hash is insufficient and can lead to a high rate of collisions. The IPv6 hash used an XOR to fit everything into the 96 bits for the fast jenkins hash, meaning it is possible for an external entity to ensure the hash collides, thus falling back to a linear search in the bucket, which is slow. We take the approach of hash the full length of IPv6 address in __ipv6_addr_jhash() so that all users can benefit from a more secure version. While this may look like it adds overhead, the reality of modern CPUs means that this is unmeasurable in real world scenarios. In simulating with llvm-mca, the increase in cycles for the hashing code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9 on Nehalem (base of ~173). In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash") netfilter switched from a jenkins hash to a siphash, but even the faster hsiphash is a more significant overhead (~20-30%) in some preliminary testing. So, in this patch, we keep to the more conservative approach to ensure we don't add much overhead per SYN. In testing, this results in a consistently even spread across the connection buckets. In both testing and real-world scenarios, we have not found any measurable performance impact. Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp") Signed-off-by: Stewart Smith <[email protected]> Signed-off-by: Samuel Mendoza-Jonas <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24net: fec: avoid tx queue timeout when XDP is enabledWei Fang1-0/+2
According to the implementation of XDP of FEC driver, the XDP path shares the transmit queues with the kernel network stack, so it is possible to lead to a tx timeout event when XDP uses the tx queue pretty much exclusively. And this event will cause the reset of the FEC hardware. To avoid timeout in this case, we use the txq_trans_cond_update() interface to update txq->trans_start to jiffies so that watchdog won't generate a transmit timeout warning. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new ↵Maciej Żenczykowski1-4/+10
temporary address currently on 6.4 net/main: # ip link add dummy1 type dummy # echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr # ip link set dummy1 up # ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1 # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic valid_lft 604800sec preferred_lft 86172sec inet6 2000::1/64 scope global mngtmpaddr valid_lft forever preferred_lft forever inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever # ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1 (can wait a few seconds if you want to, the above delete isn't [directly] the problem) # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::1/64 scope global mngtmpaddr valid_lft forever preferred_lft forever inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever # ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1 # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic valid_lft 604797sec preferred_lft 86169sec inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever This patch prevents this new 'global temporary dynamic' address from being created by the deletion of the related (same subnet prefix) 'mngtmpaddr' (which is triggered by there already being no temporary addresses). Cc: Jiri Pirko <[email protected]> Fixes: 53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses") Reported-by: Xiao Ma <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24ethernet: atheros: fix return value check in atl1e_tso_csum()Yuanjun Gong1-2/+5
in atl1e_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24atheros: fix return value check in atl1_tso()Yuanjun Gong1-2/+5
in atl1_tso(), it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: 401c0aabec4b ("atl1: simplify tx packet descriptor") Signed-off-by: Yuanjun Gong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24Merge tag 'scsi-fixes' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for a potential regression over a misunderstanding of the blk_get_queue() api" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: Fix checking return value of blk_get_queue()
2023-07-24ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 registerMark Brown1-0/+3
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown <[email protected]>
2023-07-24ASoC: da7219: Patches related to a spurious AAD IRQMark Brown1-3/+9
Merge series from Dmytro Maluka <[email protected]>: This series includes 2 patches related to (but not fixing) the following I2C failure which occurs sometimes during system suspend or resume and indicates a problem with a spurious DA7219 interrupt: [ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] <TASK> [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] </TASK> This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread() is unexpectedly running when DA7219 is suspended and should not generate interrupts. As a result, the IRQ handler is trying to read AAD IRQ event status over I2C and is hitting the I2C driver "Transfer while suspended" failure. Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the IRQ handler from running after suspending if there is a pending IRQ generated before suspending. With this patch the above failure is still reproducible, so this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an unexpectedly generated IRQ. Patch #2 does not fix the above issue either, but it prevents its potentially harmful side effects. With the existing code, if the issue occurs and the IRQ handler fails to read the AAD IRQ events status over I2C, it does not check that and tries to use the garbage uninitialized value of the events status, potentially reporting bogus events. This patch fixes that by adding missing error checking. In fact I'm sending these patches not only to submit them for review but also to ask Renesas folks for any hints on a possible cause of the described DA7219 issue (AAD interrupts spuriously firing after jack detection is already disabled) or how to debug it further.
2023-07-24s390/dasd: print copy pair message only for the correct errorStefan Haberland1-1/+1
The DASD driver has certain types of requests that might be rejected by the storage server or z/VM because they are not supported. Since the missing support of the command is not a real issue there is no user visible kernel error message for this. For copy pair setups there is a specific error that IO is not allowed on secondary devices. This error case is explicitly handled and an error message is printed. The code checking for the error did use a bitwise 'and' that is used to check for specific bits. But in this case the whole sense byte has to match. This leads to the problem that the copy pair related error message is erroneously printed for other error cases that are usually not reported. This might heavily confuse users and lead to follow on actions that might disrupt application processing. Fix by checking the sense byte for the exact value and not single bits. Cc: [email protected] # 6.1+ Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices") Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-24s390/dasd: fix hanging device after request requeueStefan Haberland1-77/+48
The DASD device driver has a function to requeue requests to the blocklayer. This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings. The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue. In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly. Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices. Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-24s390/dasd: use correct number of retries for ERP requestsStefan Haberland1-1/+1
If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery. The ERP request gets a number of retries assigned. This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs. Correctly use the number of retries of the original request for ERP requests. Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-24s390/dasd: fix hanging device after quiesce/resumeStefan Haberland1-0/+1
Quiesce and resume are functions that tell the DASD driver to stop/resume issuing I/Os to a specific DASD. On resume dasd_schedule_block_bh() is called to kick handling of IO requests again. This does unfortunately not cover internal requests which are used for path verification for example. This could lead to a hanging device when a path event or anything else that triggers internal requests occurs on a quiesced device. Fix by also calling dasd_schedule_device_bh() which triggers handling of internal requests on resume. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: [email protected] Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-24io_uring: gate iowait schedule on having pending requestsJens Axboe1-6/+17
A previous commit made all cqring waits marked as iowait, as a way to improve performance for short schedules with pending IO. However, for use cases that have a special reaper thread that does nothing but wait on events on the ring, this causes a cosmetic issue where we know have one core marked as being "busy" with 100% iowait. While this isn't a grave issue, it is confusing to users. Rather than always mark us as being in iowait, gate setting of current->in_iowait to 1 by whether or not the waiting task has pending requests. Cc: [email protected] Link: https://lore.kernel.org/io-uring/CAMEGJJ2RxopfNQ7GNLhr7X9=bHXKo+G5OOe0LUq=+UgLXsv1Xg@mail.gmail.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217699 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217700 Reported-by: Oleksandr Natalenko <[email protected]> Reported-by: Phil Elwell <[email protected]> Tested-by: Andres Freund <[email protected]> Fixes: 8a796565cec3 ("io_uring: Use io_schedule* in cqring wait") Signed-off-by: Jens Axboe <[email protected]>
2023-07-24file: always lock position for FMODE_ATOMIC_POSChristian Brauner1-4/+2
The pidfd_getfd() system call allows a caller with ptrace_may_access() abilities on another process to steal a file descriptor from this process. This system call is used by debuggers, container runtimes, system call supervisors, networking proxies etc. So while it is a special interest system call it is used in common tools. That ability ends up breaking our long-time optimization in fdget_pos(), which "knew" that if we had exclusive access to the file descriptor nobody else could access it, and we didn't need the lock for the file position. That check for file_count(file) was always fairly subtle - it depended on __fdget() not incrementing the file count for single-threaded processes and thus included that as part of the rule - but it did mean that we didn't need to take the lock in all those traditional unix process contexts. So it's sad to see this go, and I'd love to have some way to re-instate the optimization. At the same time, the lock obviously isn't ever contended in the case we optimized, so all we were optimizing away is the atomics and the cacheline dirtying. Let's see if anybody even notices that the optimization is gone. Link: https://lore.kernel.org/linux-fsdevel/[email protected]/ Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall") Cc: [email protected] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-07-24Merge tag 'media/v6.5-2' of ↵Linus Torvalds15-137/+116
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some warning fixes - verisilicon: an excessive usage of stack fix and changes at reg access - amphion: use dev_err_probe - pulse8-cec: handle possible ping error - imx-jpeg: Support to assign slot for encoder/decoder - amphion: Fix firmware path to match linux-firmware - pci: cx23885: fix error handling for cx23885 ATSC boards - staging: atomisp: select V4L2_FWNODE - mediatek: vcodec: fix cancel_work_sync fail with fluster test * tag 'media/v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: verisilicon: change confusingly named relaxed register access media: verisilicon: fix excessive stack usage media: mediatek: vcodec: fix cancel_work_sync fail with fluster test media: pci: cx23885: fix error handling for cx23885 ATSC boards media: pulse8-cec: handle possible ping error media: mtk_jpeg_core: avoid unused-variable warning media: imx-jpeg: Support to assign slot for encoder/decoder media: amphion: Fix firmware path to match linux-firmware media: amphion: use dev_err_probe media: staging: atomisp: select V4L2_FWNODE media: tc358746: Address compiler warnings
2023-07-24btrfs: check if the transaction was aborted at btrfs_wait_for_commit()Filipe Manana1-0/+1
At btrfs_wait_for_commit() we wait for a transaction to finish and then always return 0 (success) without checking if it was aborted, in which case the transaction didn't happen due to some critical error. Fix this by checking if the transaction was aborted. Fixes: 462045928bda ("Btrfs: add START_SYNC, WAIT_SYNC ioctls") CC: [email protected] # 4.19+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-07-24btrfs: remove BUG_ON()'s in add_new_free_space()Filipe Manana3-26/+53
At add_new_free_space() we have these BUG_ON()'s that are there to deal with any failure to add free space to the in memory free space cache. Such failures are mostly -ENOMEM that should be very rare. However there's no need to have these BUG_ON()'s, we can just return any error to the caller and all callers and their upper call chain are already dealing with errors. So just make add_new_free_space() return any errors, while removing the BUG_ON()'s, and returning the total amount of added free space to an optional u64 pointer argument. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-07-24Merge tag 'x86_bugs_zenbleed' of ↵Linus Torvalds5-72/+133
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Zen 2 errata fix from Borislav Petkov: "Fix an issue on AMD Zen2 processors called Zenbleed. The bug manifests itself as a data corruption issue when executing VZEROUPPER under certain microarchitectural conditions" * tag 'x86_bugs_zenbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Add a Zenbleed fix x86/cpu/amd: Move the errata checking functionality up
2023-07-24m68k: Fix invalid .section syntaxBen Hutchings3-6/+6
gas supports several different forms for .section for ELF targets, including: .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]] and: .section "NAME"[, #FLAGS...] In several places we use a mix of these two forms: .section NAME, #FLAGS... A current development snapshot of binutils (2.40.50.20230611) treats this mixed syntax as an error. Change to consistently use: .section NAME, "FLAGS" as is used elsewhere in the kernel. Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1 Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Jan-Benedict Glaw <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2023-07-24ceph: never send metrics if disable_send_metrics is setXiubo Li1-1/+1
Even the 'disable_send_metrics' is true so when the session is being opened it will always trigger to send the metric for the first time. Cc: [email protected] Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Venky Shankar <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2023-07-24phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()Harshit Mogalapalli1-1/+1
The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM. In the for loop, 'i' is used as the index for array 'priv->ports[]' with a check (i > INNO_PHY_PORT_NUM) which indicates that INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop. This > comparison needs to be changed to >=, otherwise it potentially leads to an out of bounds write on the next iteration through the loop Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Harshit Mogalapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-07-24Merge branch 'vxlan-gro-fixes'David S. Miller1-45/+97
Jiri Benc says: ==================== vxlan: fix GRO with VXLAN-GPE The first patch generalizes code for the second patch, which is a fix for broken VXLAN-GPE GRO. Thanks to Paolo for noticing the bug. ==================== Signed-off-by: David S. Miller <[email protected]>
2023-07-24vxlan: fix GRO with VXLAN-GPEJiri Benc1-15/+69
In VXLAN-GPE, there may not be an Ethernet header following the VXLAN header. But in GRO, the vxlan driver calls eth_gro_receive unconditionally, which means the following header is incorrectly parsed as Ethernet. Introduce GPE specific GRO handling. For better performance, do not check for GPE during GRO but rather install a different set of functions at setup time. Fixes: e1e5314de08ba ("vxlan: implement GPE") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-24vxlan: generalize vxlan_parse_gpe_hdr and remove unused argsJiri Benc1-30/+28
The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed. In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there. Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-24ethernet: atheros: fix return value check in atl1c_tso_csum()Yuanjun Gong1-2/+5
in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-24vxlan: calculate correct header length for GPEJiri Benc3-18/+20
VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-24Merge branch 'hns3-fixes'David S. Miller8-16/+110
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver There are some bugfix for the HNS3 ethernet driver ==================== Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-24net: hns3: fix wrong bw weight of disabled tc issueJijie Shao2-4/+16
In dwrr mode, the default bandwidth weight of disabled tc is set to 0. If the bandwidth weight is 0, the mode will change to sp. Therefore, disabled tc default bandwidth weight need changed to 1, and 0 is returned when query the bandwidth weight of disabled tc. In addition, driver need stop configure bandwidth weight if tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.