| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
that resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems"
* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: remove bandwidth budget table
usb: xhci-mtk: fix fs isoc's transfer error
usb: gadget: fix race when gadget driver register via ioctl
usb: typec: tcpci_mt6360: Update for BMC PHY setting
usb: gadget: uvc: allow for application to cleanly shutdown
usb: typec: tcpci: Don't skip cleanup in .remove() on error
usb: cdc-wdm: fix reading stuck on device close
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, and Matt Evans.
* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
|
|
Now when Intel Elkhart Lake uses again common bit timing and there are
no other users for custom bit timing, we can bring back the changes
done by the commit 0ddd83fbebbc ("can: m_can: remove support for
custom bit timing").
This effectively reverts commit ea768b2ffec6 ("Revert "can: m_can:
remove support for custom bit timing"") while taking into account
commit ea22ba40debe ("can: m_can: make custom bittiming fields const")
and commit 7d4a101c0bd3 ("can: dev: add sanity check in
can_set_static_ctrlmode()").
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jarkko Nikula <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
This reverts commit 0e8ffdf3b86dfd44b651f91b12fcae76c25c453b.
Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for
Elkhart Lake") broke the test case using bitrate switching.
| ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on
| ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on
| candump can0 &
| cangen can1 -I 0x800 -L 64 -e -fb \
| -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v
Above commit does everything correctly according to the datasheet.
However datasheet wasn't correct.
I got confirmation from hardware engineers that the actual CAN
hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0.
Datasheet was mirroring values from an another specification which was
based on earlier M_CAN version leading to wrong bit timings.
Therefore revert the commit and switch back to common bit timings.
Fixes: ea4c1787685d ("can: m_can: pci: use custom bit timings for Elkhart Lake")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jarkko Nikula <[email protected]>
Reported-by: Chee Hou Ong <[email protected]>
Reported-by: Aman Kumar <[email protected]>
Reported-by: Pallavi Kumari <[email protected]>
Cc: <[email protected]> # v5.16+
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix two NDEBUG warnings in 'perf bench numa'
- Fix ARM coresight `perf test` failure
- Sync linux/kvm.h with the kernel sources
- Add James and Mike as Arm64 performance events reviewers
* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
|
|
In gem_rx_refill rx_prepared_head is incremented at the beginning of
the while loop preparing the skb and data buffers. If the skb or data
buffer allocation fails, this BD will be unusable BDs until the head
loops back to the same BD (and obviously buffer allocation succeeds).
In the unlikely event that there's a string of allocation failures,
there will be an equal number of unusable BDs and an inconsistent RX
BD chain. Hence increment the head at the end of the while loop to be
clean.
Fixes: 4df95131ea80 ("net/macb: change RX path for GEM")
Signed-off-by: Harini Katakam <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When ADQ queue groups (TCs) are created via tc mqprio command,
RSS contexts and associated RSS indirection tables are configured
automatically per TC based on the queue ranges specified for
each traffic class.
For ex:
tc qdisc add dev enp175s0f0 root mqprio num_tc 3 map 0 1 2 \
queues 2@0 8@2 4@10 hw 1 mode channel
will create 3 queue groups (TC 0-2) with queue ranges 2, 8 and 4
in 3 queue groups. Each queue group is associated with its
own RSS context and RSS indirection table.
Add support to expose RSS indirection tables for all ADQ queue
groups using ethtool RSS contexts interface.
ethtool -x enp175s0f0 context <tc-num>
Signed-off-by: Sridhar Samudrala <[email protected]>
Signed-off-by: Sudheer Mogilappagari <[email protected]>
Tested-by: Bharathi Sreenivas <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit
callback.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Mat Martineau says:
====================
mptcp: Subflow accounting fix
This series contains a bug fix affecting the in-kernel path manager
(patch 1), where closing subflows would sometimes not adjust the PM's
count of active subflows. Patch 2 updates the selftests to exercise the
new code.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add and delete a bunch of endpoints and verify the
respect of configured limits.
This covers the codepath introduced by the previous patch.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If the PM closes a fully established MPJ subflow or the subflow
creation errors out in it's early stage the subflows counter is
not bumped accordingly.
This change adds the missing accounting, additionally taking care
of updating accordingly the 'accept_subflow' flag.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove napi_weight statics which are set to 64 and never modified,
remnants of the out-of-tree napi_weight module param.
Acked-by: Edward Cree <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull more drm fixes from Dave Airlie:
"Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
ones also popped up later, but all seem like bad enough things to fix.
The dma-buf, vc4 and nouveau ones are all pretty small.
The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
devices properly, uncovered some use-after-free bugs in existing
drivers. Then the fix for those bugs wasn't correct. This reverts that
fix, and puts the proper fixes in place in the drivers to avoid the
use-after-frees.
This has had a fair number of eyes on it at this stage, and I'm
confident enough that it puts things in the right place, and is less
dangerous than reverting our way out of the initial change at this
stage.
fbdev:
- revert NULL deref fix that turned into a use-after-free
- prevent use-after-free in fbdev
- efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees
dma-buf:
- fix panic in stats setup
vc4:
- fix hdmi build
nouveau:
- tegra iommu present fix
- fix leak in backlight name
vmwgfx:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects"
* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
drm/vmwgfx: Initialize drm_mode_fb_cmd2
drm/vmwgfx: Fix fencing on SVGAv3
drm/vc4: hdmi: Fix build error for implicit function declaration
dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
fbdev: efifb: Fix a use-after-free due early fb_info cleanup
drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
drm/nouveau/tegra: Stop using iommu_present()
fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: Prevent possible use-after-free in fb_release()
Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
|
|
Before commit 322cff70d46c the fifo_time member of requests on a dispatch
list was not used. Commit 322cff70d46c introduces code that reads the
fifo_time member of requests on dispatch lists. Hence this patch that sets
the fifo_time member when adding a request to a dispatch list.
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Damien Le Moal <[email protected]>
Fixes: 322cff70d46c ("block/mq-deadline: Prioritize high-priority requests")
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat
|
|
https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes
vmwgfx fixes for:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects
Signed-off-by: Dave Airlie <[email protected]>
From: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"We've finally identified commit dc732906c245 ("gfs2: Introduce flag
for glock holder auto-demotion") to be the other cause of the
filesystem corruption we've been seeing. This feature isn't strictly
necessary anymore, so we've decided to stop using it for now.
With this and the gfs_iomap_end rounding fix you've already seen
("gfs2: Fix filesystem block deallocation for short writes" in this
pull request), we're corruption free again now.
- Fix filesystem block deallocation for short writes.
- Stop using glock holder auto-demotion for now.
- Get rid of buffered writes inefficiencies due to page faults being
disabled.
- Minor other cleanups"
* tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Stop using glock holder auto-demotion for now
gfs2: buffered write prefaulting
gfs2: Align read and write chunks to the page cache
gfs2: Pull return value test out of should_fault_in_pages
gfs2: Clean up use of fault_in_iov_iter_{read,write}able
gfs2: Variable rename
gfs2: Fix filesystem block deallocation for short writes
|
|
We're having unresolved issues with the glock holder auto-demotion mechanism
introduced in commit dc732906c245. This mechanism was assumed to be essential
for avoiding frequent short reads and writes until commit 296abc0d91d8
("gfs2: No short reads or writes upon glock contention"). Since then,
when the inode glock is lost, it is simply re-acquired and the operation
is resumed. This means that apart from the performance penalty, we
might as well drop the inode glock before faulting in pages, and
re-acquire it afterwards.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
In gfs2_file_buffered_write, to increase the likelihood that all the
user memory we're trying to write will be resident in memory, carry out
the write in chunks and fault in each chunk of user memory before trying
to write it. Otherwise, some workloads will trigger frequent short
"internal" writes, causing filesystem blocks to be allocated and then
partially deallocated again when writing into holes, which is wasteful
and breaks reservations.
Neither the chunked writes nor any of the short "internal" writes are
user visible.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
These patches mosly fix error legs and exceptional conditions
(scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with
lpfc features"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
scsi: lpfc: Fix split code for FLOGI on FCoE
scsi: qla2xxx: Fix missed DMA unmap for aborted commands
scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
|
|
Align the chunks that reads and writes are carried out in to the page
cache rather than the user buffers. This will be more efficient in
general, especially for allocating writes. Optimizing the case that the
user buffer is gfs2 backed isn't very useful; we only need to make sure
we won't deadlock.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Pull the return value test of the previous read or write operation out
of should_fault_in_pages(). In a following patch, we'll fault in pages
before the I/O and there will be no return value to check.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
No need to store the return value of the fault_in functions in separate
variables.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Instead of counting the number of bytes read from the filesystem,
functions gfs2_file_direct_read and gfs2_file_read_iter count the number
of bytes written into the user buffer. Conversely, functions
gfs2_file_direct_write and gfs2_file_buffered_write count the number of
bytes read from the user buffer. This is nothing but confusing, so
change the read functions to count how many bytes they have read, and
the write functions to count how many bytes they have written.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
When a write cannot be carried out in full, gfs2_iomap_end() releases
blocks that have been allocated for this write but haven't been used.
To compute the end of the allocation, gfs2_iomap_end() incorrectly
rounded the end of the attempted write down to the next block boundary
to arrive at the end of the allocation. It would have to round up, but
the end of the allocation is also available as iomap->offset +
iomap->length, so just use that instead.
In addition, use round_up() for computing the start of the unused range.
Fixes: 64bc06bb32ee ("gfs2: iomap buffered write support")
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Pull ceph fix from Ilya Dryomov:
"Two fixes to properly maintain xattrs on async creates and thus
preserve SELinux context on newly created files and to avoid improper
usage of folio->private field which triggered BUG_ONs.
Both marked for stable"
* tag 'ceph-for-5.18-rc7' of https://github.com/ceph/ceph-client:
ceph: check folio PG_private bit instead of folio->private
ceph: fix setting of xattrs on async created inodes
|
|
Pull NFS client bugfixes from Trond Myklebust:
"One more pull request. There was a bug in the fix to ensure that gss-
proxy continues to work correctly after we fixed the AF_LOCAL socket
leak in the RPC code. This therefore reverts that broken patch, and
replaces it with one that works correctly.
Stable fixes:
- SUNRPC: Ensure that the gssproxy client can start in a connected
state
Bugfixes:
- Revert "SUNRPC: Ensure gss-proxy connects on setup"
- nfs: fix broken handling of the softreval mount option"
* tag 'nfs-for-5.18-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: fix broken handling of the softreval mount option
SUNRPC: Ensure that the gssproxy client can start in a connected state
Revert "SUNRPC: Ensure gss-proxy connects on setup"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-05-13
1) Cleanups for the code behind the XFRM offload API. This is a
preparation for the extension of the API for policy offload.
From Leon Romanovsky.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: drop not needed flags variable in XFRM offload struct
net/mlx5e: Use XFRM state direction instead of flags
netdevsim: rely on XFRM state direction instead of flags
ixgbe: propagate XFRM offload state direction instead of flags
xfrm: store and rely on direction to construct offload flags
xfrm: rename xfrm_state_offload struct to allow reuse
xfrm: delete not used number of external headers
xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for [email protected]
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
|
|
If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link:
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel':
ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel':
ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register'
ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker':
ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info':
ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index'
To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK.
Reported-by: Hulk Robot <[email protected]>
Fixes: d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)")
Signed-off-by: Ren Zhijie <[email protected]>
Acked-by: Martin Habets <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- TLB invalidation workaround for Qualcomm Kryo-4xx "gold" CPUs
- Fix broken dependency in the vDSO Makefile
- Fix pointer authentication overrides in ISAR2 ID register
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs
arm64: cpufeature: remove duplicate ID_AA64ISAR2_EL1 entry
arm64: vdso: fix makefile dependency on vdso.so
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Restrict ltq-cputemp to SOC_XWAY to fix build failure
- Add OF device ID table to tmp401 driver to enable auto-load
* tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltq-cputemp) restrict it to SOC_XWAY
hwmon: (tmp401) Add OF device ID table
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix.
I think there might be a few misc fbdev ones outstanding, but I'll see
if they are necessary and pass them on if so.
amdgpu:
- Disable ASPM for VI boards on ADL platforms
- S0ix DCN3.1 display fix
- Resume regression fix
- Stable pstate fix
i915:
- fix for kernel memory corruption when running a lot of OpenCL tests
in parallel"
* tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
drm/i915: Fix race in __i915_vma_remove_closed
drm/amd/display: undo clearing of z10 related function pointers
drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
|
|
The checksum is optional for UDP packets. However nf_reject would
previously require a valid checksum to elicit a response such as
ICMP_DEST_UNREACH.
Add some logic to nf_reject_verify_csum to determine if a UDP packet has
a zero checksum and should therefore not be verified.
Signed-off-by: Kevin Mitchell <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When creating a flow table entry, the reverse route is looked
up based on the current packet.
There can be scenarios where the user creates a custom ip rule
to route the traffic differently.
In order to support those scenarios, the lookup needs to add
more information based on the current packet.
The patch adds multiple new information to the route lookup.
Signed-off-by: Sven Auhagen <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The pointer check usually results in a 'false positive': its likely
that the ctnetlink module is loaded but no event monitoring is enabled.
After recent change to autodetect ctnetlink usage and only allocate
the ecache extension if a listener is active, check if the extension
is present on a given conntrack.
If its not there, there is nothing to report and calls to the
notification framework can be elided.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This adds the new nf_conntrack_events=2 mode and makes it the
default.
This leverages the earlier flag in struct net to allow to avoid
the event extension as long as no event listener is active in
the namespace.
This avoids, for most cases, allocation of ct->ext area.
A followup patch will take further advantage of this by avoiding
calls down into the event framework if the extension isn't present.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Only called when new ct is allocated or the extension isn't present.
This function will be extended, place this in the conntrack module
instead of inlining.
The callers already depend on nf_conntrack module.
Return value is changed to bool, noone used the returned pointer.
Make sure that the core drops the newly allocated conntrack
if the extension is requested but can't be added.
This makes it necessary to ifdef the section, as the stub
always returns false we'd drop every new conntrack if the
the ecache extension is disabled in kconfig.
Add from data path (xt_CT, nft_ct) is unchanged.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
At this time, every new conntrack gets the 'event cache extension'
enabled for it.
This is because the 'net.netfilter.nf_conntrack_events' sysctl defaults
to 1.
Changing the default to 0 means that commands that rely on the event
notification extension, e.g. 'conntrack -E' or conntrackd, stop working.
We COULD detect if there is a listener by means of
'nfnetlink_has_listeners()' and only add the extension if this is true.
The downside is a dependency from conntrack module to nfnetlink module.
This adds a different way: inc/dec a counter whenever a ctnetlink group
is being (un)subscribed and toggle a flag in struct net.
Next patches will take advantage of this and will only add the event
extension if the flag is set.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This patch adds a structure to collect all the context data that is
passed to the cleanup iterator.
struct nf_ct_iter_data {
struct net *net;
void *data;
u32 portid;
int report;
};
There is a netns field that allows to clean up conntrack entries
specifically owned by the specified netns.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Now that the conntrack entry isn't placed on the pcpu list anymore the
bh only needs to be disabled in the 'expectation present' case.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
It has no function anymore and can be removed.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Its not needed anymore:
A. If entry is totally new, then the rcu-protected resource
must already have been removed from global visibility before call
to nf_ct_iterate_destroy.
B. If entry was allocated before, but is not yet in the hash table
(uncofirmed case), genid gets incremented and synchronize_rcu() call
makes sure access has completed.
C. Next attempt to peek at extension area will fail for unconfirmed
conntracks, because ext->genid != genid.
D. Conntracks in the hash are iterated as before.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Increment the extid on module removal; this makes sure that even
in extreme cases any old uncofirmed entry that happened to be kept
e.g. on nfnetlink_queue list will not trip over a stale timeout
reference.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Multiple netfilter extensions store pointers to external data
in their extension area struct.
Examples:
1. Timeout policies
2. Connection tracking helpers.
No references are taken for these.
When a helper or timeout policy is removed, the conntrack table gets
traversed and affected extensions are cleared.
Conntrack entries not yet in the hashtable are referenced via a special
list, the unconfirmed list.
On removal of a policy or connection tracking helper, the unconfirmed
list gets traversed an all entries are marked as dying, this prevents
them from getting committed to the table at insertion time: core checks
for dying bit, if set, the conntrack entry gets destroyed at confirm
time.
The disadvantage is that each new conntrack has to be added to the percpu
unconfirmed list, and each insertion needs to remove it from this list.
The list is only ever needed when a policy or helper is removed -- a rare
occurrence.
Add a generation ID count: Instead of adding to the list and then
traversing that list on policy/helper removal, increment a counter
that is stored in the extension area.
For unconfirmed conntracks, the extension has the genid valid at ct
allocation time.
Removal of a helper/policy etc. increments the counter.
At confirmation time, validate that ext->genid == global_id.
If the stored number is not the same, do not allow the conntrack
insertion, just like as if a confirmed-list traversal would have flagged
the entry as dying.
After insertion, the genid is no longer relevant (conntrack entries
are now reachable via the conntrack table iterators and is set to 0.
This allows removal of the percpu unconfirmed list.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This helper tags connections not yet in the conntrack table as
dying. These nf_conn entries will be dropped instead when the
core attempts to insert them from the input or postrouting
'confirm' hook.
After the previous change, the entries get unlinked from the
list earlier, so that by the time the actual exit hook runs,
new connections no longer have a timeout policy assigned.
Its enough to walk the hashtable instead.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|