aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-28Merge tag 'zonefs-5.6-rc4' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fixes from Damien Le Moal: "Two fixes in here: - Revert the initial decision to silently ignore IOCB_NOWAIT for asynchronous direct IOs to sequential zone files. Instead, return an error to the user to signal that the feature is not supported (from Christoph) - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures if no other file system already selected this option (from Johannes)" * tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select FS_IOMAP zonefs: fix IOCB_NOWAIT handling
2020-02-28RDMA/core: Fix pkey and port assignment in get_new_ppsMaor Gottlieb1-4/+8
When port is part of the modify mask, then we should take it from the qp_attr and not from the old pps. Same for PKEY. Otherwise there are panics in some configurations: RIP: 0010:get_pkey_idx_qp_list+0x50/0x80 [ib_core] Code: c7 18 e8 13 04 30 ef 0f b6 43 06 48 69 c0 b8 00 00 00 48 03 85 a0 04 00 00 48 8b 50 20 48 8d 48 20 48 39 ca 74 1a 0f b7 73 04 <66> 39 72 10 75 08 eb 10 66 39 72 10 74 0a 48 8b 12 48 39 ca 75 f2 RSP: 0018:ffffafb3480932f0 EFLAGS: 00010203 RAX: ffff98059ababa10 RBX: ffff980d926e8cc0 RCX: ffff98059ababa30 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff98059ababa28 RBP: ffff98059b940000 R08: 00000000000310c0 R09: ffff97fe47c07480 R10: 0000000000000036 R11: 0000000000000200 R12: 0000000000000071 R13: ffff98059b940000 R14: ffff980d87f948a0 R15: 0000000000000000 FS: 00007f88deb31740(0000) GS:ffff98059f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000853e26001 CR4: 00000000001606e0 Call Trace: port_pkey_list_insert+0x3d/0x1b0 [ib_core] ? kmem_cache_alloc_trace+0x215/0x220 ib_security_modify_qp+0x226/0x3a0 [ib_core] _ib_modify_qp+0xcf/0x390 [ib_core] ipoib_init_qp+0x7f/0x200 [ib_ipoib] ? rvt_modify_port+0xd0/0xd0 [rdmavt] ? ib_find_pkey+0x99/0xf0 [ib_core] ipoib_ib_dev_open_default+0x1a/0x200 [ib_ipoib] ipoib_ib_dev_open+0x96/0x130 [ib_ipoib] ipoib_open+0x44/0x130 [ib_ipoib] __dev_open+0xd1/0x160 __dev_change_flags+0x1ab/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x328/0xe30 ? __nla_validate_parse+0x54/0x900 __rtnl_newlink+0x54e/0x810 ? __alloc_pages_nodemask+0x17d/0x320 ? page_fault+0x30/0x50 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x1c8/0x220 rtnl_newlink+0x43/0x60 rtnetlink_rcv_msg+0x28f/0x350 ? kmem_cache_alloc+0x1fb/0x200 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x24d/0x2d0 ? rtnl_calcit.isra.31+0x120/0x120 netlink_rcv_skb+0xcb/0x100 netlink_unicast+0x1e0/0x340 netlink_sendmsg+0x317/0x480 ? __check_object_size+0x48/0x1d0 sock_sendmsg+0x65/0x80 ____sys_sendmsg+0x223/0x260 ? copy_msghdr_from_user+0xdc/0x140 ___sys_sendmsg+0x7c/0xc0 ? skb_dequeue+0x57/0x70 ? __inode_wait_for_writeback+0x75/0xe0 ? fsnotify_grab_connector+0x45/0x80 ? __dentry_kill+0x12c/0x180 __sys_sendmsg+0x58/0xa0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f88de467f10 Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Tested-by: Mike Marciniszyn <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-28vt: selection, push sel_lock upJiri Slaby1-9/+7
sel_lock cannot nest in the console lock. Thanks to syzkaller, the kernel states firmly: > WARNING: possible circular locking dependency detected > 5.6.0-rc3-syzkaller #0 Not tainted > ------------------------------------------------------ > syz-executor.4/20336 is trying to acquire lock: > ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136 > > but task is already holding lock: > ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374 > > which lock already depends on the new lock. > > the existing dependency chain (in reverse order) is: > > -> #2 (sel_lock){+.+.}: > mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118 > set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217 > set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181 > tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050 > vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364 This is ioctl(TIOCL_SETSEL). Locks held on the path: console_lock -> sel_lock > -> #1 (console_lock){+.+.}: > console_lock+0x46/0x70 kernel/printk/printk.c:2289 > con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223 > n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350 > do_tty_write drivers/tty/tty_io.c:962 [inline] > tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046 This is write(). Locks held on the path: termios_rwsem -> console_lock > -> #0 (&tty->termios_rwsem){++++}: > down_write+0x57/0x140 kernel/locking/rwsem.c:1534 > tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136 > mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902 > tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465 > paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389 > tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055 > vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364 This is ioctl(TIOCL_PASTESEL). Locks held on the path: sel_lock -> termios_rwsem > other info that might help us debug this: > > Chain exists of: > &tty->termios_rwsem --> console_lock --> sel_lock Clearly. From the above, we have: console_lock -> sel_lock sel_lock -> termios_rwsem termios_rwsem -> console_lock Fix this by reversing the console_lock -> sel_lock dependency in ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock. Signed-off-by: Jiri Slaby <[email protected]> Reported-by: [email protected] Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race") Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-02-28vt: selection, push console lock downJiri Slaby3-5/+12
We need to nest the console lock in sel_lock, so we have to push it down a bit. Fortunately, the callers of set_selection_* just lock the console lock around the function call. So moving it down is easy. In the next patch, we switch the order. Signed-off-by: Jiri Slaby <[email protected]> Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race") Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-02-28selftests: pidfd: Add pidfd_fdinfo_test in .gitignoreChristophe Leroy1-0/+1
The commit identified below added pidfd_fdinfo_test but failed to add it to .gitignore Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Christian Brauner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/966567c7dbaa26a06730d796354f8a086c0ee288.1582847778.git.christophe.leroy@c-s.fr Signed-off-by: Christian Brauner <[email protected]>
2020-02-28exit: Fix Sparse errors and warningsMadhuparna Bhowmik1-2/+2
This patch fixes the following sparse error: kernel/exit.c:627:25: error: incompatible types in comparison expression And the following warning: kernel/exit.c:626:40: warning: incorrect type in assignment Signed-off-by: Madhuparna Bhowmik <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Acked-by: Christian Brauner <[email protected]> [[email protected]: edit commit message] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2020-02-28fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()Madhuparna Bhowmik1-1/+1
Use RCU_INIT_POINTER() instead of rcu_access_pointer() in copy_sighand(). Suggested-by: Oleg Nesterov <[email protected]> Signed-off-by: Madhuparna Bhowmik <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Acked-by: Christian Brauner <[email protected]> [[email protected]: edit commit message] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2020-02-28Merge tag 'kvmarm-fixes-5.6-1' of ↵Paolo Bonzini15-77/+84
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.6, take #1 - Fix compilation on 32bit - Move VHE guest entry/exit into the VHE-specific entry code - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
2020-02-28kvm: x86: Limit the number of "kvm: disabled by bios" messagesErwan Velu1-2/+2
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by: Erwan Velu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28Merge branches 'pm-sleep' and 'pm-devfreq'Rafael J. Wysocki3-5/+2
* pm-sleep: PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst * pm-devfreq: Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
2020-02-28KVM: x86: avoid useless copy of cpufreq policyPaolo Bonzini1-5/+5
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by: Christoph Hellwig <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: allow disabling -WerrorPaolo Bonzini2-1/+14
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by: Christoph Hellwig <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: x86: allow compiling as non-module with W=1Valdis Klētnieks2-0/+4
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by: Valdis Kletnieks <[email protected]> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipisWanpeng Li1-12/+21
Nick Desaulniers Reported: When building with: $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000 The following warning is observed: arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=] static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector) ^ Debugging with: https://github.com/ClangBuiltLinux/frame-larger-than via: $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \ kvm_send_ipi_mask_allbutself points to the stack allocated `struct cpumask newmask` in `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as 8192, making a single instance of a `struct cpumask` 1024 B. This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for both pv tlb and pv ipis.. Reported-by: Nick Desaulniers <[email protected]> Acked-by: Nick Desaulniers <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Nick Desaulniers <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: Introduce pv check helpersWanpeng Li1-10/+24
Introduce some pv check helpers for consistency. Suggested-by: Vitaly Kuznetsov <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: let declaration of kvm_get_running_vcpus match implementationChristian Borntraeger1-1/+1
Sparse notices that declaration and implementation do not match: arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces) arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: expected struct kvm_vcpu [noderef] <asn:3> ** arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: got struct kvm_vcpu *[noderef] <asn:3> * Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-28KVM: SVM: allocate AVIC data structures based on kvm_amd module parameterPaolo Bonzini1-1/+2
Even if APICv is disabled at startup, the backing page and ir_list need to be initialized in case they are needed later. The only case in which this can be skipped is for userspace irqchip, and that must be done because avic_init_backing_page dereferences vcpu->arch.apic (which is NULL for userspace irqchip). Tested-by: [email protected] Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Reviewed-by: Miaohe Lin <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-27Merge tag 'drm-fixes-2020-02-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds14-43/+138
Pull drm fixes from Dave Airlie: "Just some fixes for this week: amdgpu, radeon and i915. The main i915 one is a regression Gen7 (Ivybridge/Haswell), this moves them back from trying to use the full-ppgtt support to the aliasing version it used to use due to gpu hangs. Otherwise it's pretty quiet. amdgpu: - Drop DRIVER_USE_AGP - Fix memory leak in GPU reset - Resume fix for raven radeon: - Drop DRIVER_USE_AGP i915: - downgrade gen7 back to aliasing-ppgtt to avoid GPU hangs - shrinker fix - pmu leak and double free fixes - gvt user after free and virtual display reset fixes - randconfig build fix" * tag 'drm-fixes-2020-02-28' of git://anongit.freedesktop.org/drm/drm: drm/radeon: Inline drm_get_pci_dev drm/amdgpu: Drop DRIVER_USE_AGP drm/i915: Avoid recursing onto active vma from the shrinker drm/i915/pmu: Avoid using globals for PMU events drm/i915/pmu: Avoid using globals for CPU hotplug state drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt drm/i915: fix header test with GCOV amdgpu/gmc_v9: save/restore sdpif regs during S3 drm/amdgpu: fix memory leak during TDR test(v2) drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime drm/i915/gvt: Separate display reset from ALL_ENGINES reset
2020-02-28Merge tag 'drm-intel-fixes-2020-02-27' of ↵Dave Airlie7-38/+46
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc4: - downgrade gen7 back to aliasing-ppgtt to avoid GPU hangs - shrinker fix - pmu leak and double free fixes - gvt user after free and virtual display reset fixes - randconfig build fix Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-28Merge tag 'amd-drm-fixes-5.6-2020-02-26' of ↵Dave Airlie7-5/+92
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-26: amdgpu: - Drop DRIVER_USE_AGP - Fix memory leak in GPU reset - Resume fix for raven radeon: - Drop DRIVER_USE_AGP Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds70-536/+1062
Pull networking fixes from David Miller: 1) Fix leak in nl80211 AP start where we leak the ACL memory, from Johannes Berg. 2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski. 3) Fix RCU stall in ipset, from Jozsef Kadlecsik. 4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna Bhowmik. 5) Fix race causing TX hang in ll_temac, from Esben Haabendal. 6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov. 7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha Nambiar. 8) Size netlink responses properly in schedule action code to take into consideration TCA_ACT_FLAGS. From Jiri Pirko. 9) Fix firmware paths for mscc PHY driver, from Antoine Tenart. 10) Don't register stmmac notifier multiple times, from Aaro Koskinen. 11) Various rmnet bug fixes, from Taehee Yoo. 12) Fix vsock deadlock in vsock transport release, from Stefano Garzarella. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() unix: It's CONFIG_PROC_FS not CONFIG_PROCFS net: rmnet: fix packet forwarding in rmnet bridge mode net: rmnet: fix bridge mode bugs net: rmnet: use upper/lower device infrastructure net: rmnet: do not allow to change mux id if mux id is duplicated net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device() net: rmnet: fix suspicious RCU usage net: rmnet: fix NULL pointer dereference in rmnet_changelink() net: rmnet: fix NULL pointer dereference in rmnet_newlink() net: phy: marvell: don't interpret PHY status unless resolved mlx5: register lag notifier for init network namespace only unix: define and set show_fdinfo only if procfs is enabled hinic: fix a bug of rss configuration hinic: fix a bug of setting hw_ioctxt hinic: fix a irq affinity bug net/smc: check for valid ib_client_data ...
2020-02-28powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systemsDesnes A. Nunes do Rosario1-1/+3
PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch. The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems. Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG") Signed-off-by: Desnes A. Nunes do Rosario <[email protected]> Reviewed-by: Leonardo Bras <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-02-27MAINTAINERS: Correct Cadence PCI driver pathLukas Bulwahn1-1/+1
de80f95ccb9c ("PCI: cadence: Move all files to per-device cadence directory") moved files of the PCI cadence drivers, but did not update the MAINTAINERS entry. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: drivers/pci/controller/pcie-cadence* Repair the MAINTAINERS entry. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-02-27dm zoned: Fix reference counter initial value of chunk worksShin'ichiro Kawasaki1-4/+4
Dm-zoned initializes reference counters of new chunk works with zero value and refcount_inc() is called to increment the counter. However, the refcount_inc() function handles the addition to zero value as an error and triggers the warning as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 1506 at lib/refcount.c:25 refcount_warn_saturate+0x68/0xf0 ... CPU: 7 PID: 1506 Comm: systemd-udevd Not tainted 5.4.0+ #134 ... Call Trace: dmz_map+0x2d2/0x350 [dm_zoned] __map_bio+0x42/0x1a0 __split_and_process_non_flush+0x14a/0x1b0 __split_and_process_bio+0x83/0x240 ? kmem_cache_alloc+0x165/0x220 dm_process_bio+0x90/0x230 ? generic_make_request_checks+0x2e7/0x680 dm_make_request+0x3e/0xb0 generic_make_request+0xcf/0x320 ? memcg_drain_all_list_lrus+0x1c0/0x1c0 submit_bio+0x3c/0x160 ? guard_bio_eod+0x2c/0x130 mpage_readpages+0x182/0x1d0 ? bdev_evict_inode+0xf0/0xf0 read_pages+0x6b/0x1b0 __do_page_cache_readahead+0x1ba/0x1d0 force_page_cache_readahead+0x93/0x100 generic_file_read_iter+0x83a/0xe40 ? __seccomp_filter+0x7b/0x670 new_sync_read+0x12a/0x1c0 vfs_read+0x9d/0x150 ksys_read+0x5f/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... After this warning, following refcount API calls for the counter all fail to change the counter value. Fix this by setting the initial reference counter value not zero but one for the new chunk works. Instead, do not call refcount_inc() via dmz_get_chunk_work() for the new chunks works. The failure was observed with linux version 5.4 with CONFIG_REFCOUNT_FULL enabled. Refcount rework was merged to linux version 5.5 by the commit 168829ad09ca ("Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"). After this commit, CONFIG_REFCOUNT_FULL was removed and the failure was observed regardless of kernel configuration. Linux version 4.20 merged the commit 092b5648760a ("dm zoned: target: use refcount_t for dm zoned reference counters"). Before this commit, dm zoned used atomic_t APIs which does not check addition to zero, then this fix is not necessary. Fixes: 092b5648760a ("dm zoned: target: use refcount_t for dm zoned reference counters") Cc: [email protected] # 5.4+ Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-02-27dm writecache: verify watermark during resumeMikulas Patocka1-2/+10
Verify the watermark upon resume - so that if the target is reloaded with lower watermark, it will start the cleanup process immediately. Fixes: 48debafe4f2f ("dm: add writecache target") Cc: [email protected] # 4.18+ Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-02-27dm: report suspended device during destroyMikulas Patocka3-8/+7
The function dm_suspended returns true if the target is suspended. However, when the target is being suspended during unload, it returns false. An example where this is a problem: the test "!dm_suspended(wc->ti)" in writecache_writeback is not sufficient, because dm_suspended returns zero while writecache_suspend is in progress. As is, without an enhanced dm_suspended, simply switching from flush_workqueue to drain_workqueue still emits warnings: workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function flushes the current work. However, the workqueue may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. Because of this - the function writecache_writeback continues execution after the device was suspended and then concurrently with writecache_dtr, causing a crash in writecache_writeback. We must use drain_workqueue - that waits until the work and all re-queued works finish. As a prereq for switching to drain_workqueue, this commit fixes dm_suspended to return true after the presuspend hook and before the postsuspend hook - just like during a normal suspend. It allows simplifying the dm-integrity and dm-writecache targets so that they don't have to maintain suspended flags on their own. With this change use of drain_workqueue() can be used effectively. This change was tested with the lvm2 testsuite and cryptsetup testsuite and the are no regressions. Fixes: 48debafe4f2f ("dm: add writecache target") Cc: [email protected] # 4.18+ Reported-by: Corey Marthaler <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-02-27io_uring: fix 32-bit compatability with sendmsg/recvmsgJens Axboe1-0/+10
We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise the iovec import for these commands will not do the right thing and fail the command with -EINVAL. Found by running the test suite compiled as 32-bit. Cc: [email protected] Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()") Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()") Signed-off-by: Jens Axboe <[email protected]>
2020-02-27RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()Jason Gunthorpe1-0/+1
The algorithm pre-allocates a cm_id since allocation cannot be done while holding the cm.lock spinlock, however it doesn't free it on one error path, leading to a memory leak. Fixes: 067b171b8679 ("IB/cm: Share listening CM IDs") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-27net: dsa: mv88e6xxx: Fix masking of egress portAndrew Lunn1-2/+2
Add missing ~ to the usage of the mask. Reported-by: Kevin Benson <[email protected]> Reported-by: Chris Healy <[email protected]> Fixes: 5c74c54ce6ff ("net: dsa: mv88e6xxx: Split monitor port configuration") Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27mlxsw: pci: Wait longer before accessing the device after resetAmit Cohen1-1/+1
During initialization the driver issues a reset to the device and waits for 100ms before checking if the firmware is ready. The waiting is necessary because before that the device is irresponsive and the first read can result in a completion timeout. While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is insufficient for Spectrum-3. Fix this by increasing the timeout to 200ms. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27sfc: fix timestamp reconstruction at 16-bit rollover pointsAlex Maftei (amaftei)1-3/+35
We can't just use the top bits of the last sync event as they could be off-by-one every 65,536 seconds, giving an error in reconstruction of 65,536 seconds. This patch uses the difference in the bottom 16 bits (mod 2^16) to calculate an offset that needs to be applied to the last sync event to get to the current time. Signed-off-by: Alexandru-Mihai Maftei <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27vsock: fix potential deadlock in transport->release()Stefano Garzarella3-13/+12
Some transports (hyperv, virtio) acquire the sock lock during the .release() callback. In the vsock_stream_connect() we call vsock_assign_transport(); if the socket was previously assigned to another transport, the vsk->transport->release() is called, but the sock lock is already held in the vsock_stream_connect(), causing a deadlock reported by syzbot: INFO: task syz-executor280:9768 blocked for more than 143 seconds. Not tainted 5.6.0-rc1-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor280 D27912 9768 9766 0x00000000 Call Trace: context_switch kernel/sched/core.c:3386 [inline] __schedule+0x934/0x1f90 kernel/sched/core.c:4082 schedule+0xdc/0x2b0 kernel/sched/core.c:4156 __lock_sock+0x165/0x290 net/core/sock.c:2413 lock_sock_nested+0xfe/0x120 net/core/sock.c:2938 virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832 vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454 vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288 __sys_connect_file+0x161/0x1c0 net/socket.c:1857 __sys_connect+0x174/0x1b0 net/socket.c:1874 __do_sys_connect net/socket.c:1885 [inline] __se_sys_connect net/socket.c:1882 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1882 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe To avoid this issue, this patch remove the lock acquiring in the .release() callback of hyperv and virtio transports, and it holds the lock when we call vsk->transport->release() in the vsock core. Reported-by: [email protected] Fixes: 408624af4c89 ("vsock: use local transport when it is loaded") Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Stefan Hajnoczi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27unix: It's CONFIG_PROC_FS not CONFIG_PROCFSDavid S. Miller1-1/+1
Fixes: 3a12500ed5dd ("unix: define and set show_fdinfo only if procfs is enabled") Signed-off-by: David S. Miller <[email protected]>
2020-02-27Merge branch 'net-rmnet-fix-several-bugs'David S. Miller5-107/+98
Taehee Yoo says: ==================== net: rmnet: fix several bugs This patchset is to fix several bugs in RMNET module. 1. The first patch fixes NULL-ptr-deref in rmnet_newlink(). When rmnet interface is being created, it uses IFLA_LINK without checking NULL. So, if userspace doesn't set IFLA_LINK, panic will occur. In this patch, checking NULL pointer code is added. 2. The second patch fixes NULL-ptr-deref in rmnet_changelink(). To get real device in rmnet_changelink(), it uses IFLA_LINK. But, IFLA_LINK should not be used in rmnet_changelink(). 3. The third patch fixes suspicious RCU usage in rmnet_get_port(). rmnet_get_port() uses rcu_dereference_rtnl(). But, rmnet_get_port() is used by datapath. So, rcu_dereference_bh() should be used instead of rcu_dereference_rtnl(). 4. The fourth patch fixes suspicious RCU usage in rmnet_force_unassociate_device(). RCU critical section should not be scheduled. But, unregister_netdevice_queue() in the rmnet_force_unassociate_device() would be scheduled. So, the RCU warning occurs. In this patch, the rcu_read_lock() in the rmnet_force_unassociate_device() is removed because it's unnecessary. 5. The fifth patch fixes duplicate MUX ID case. RMNET MUX ID is unique. So, rmnet interface isn't allowed to be created, which have a duplicate MUX ID. But, only rmnet_newlink() checks this condition, rmnet_changelink() doesn't check this. So, duplicate MUX ID case would happen. 6. The sixth patch fixes upper/lower interface relationship problems. When IFLA_LINK is used, the upper/lower infrastructure should be used. Because it checks the maximum depth of upper/lower interfaces and it also checks circular interface relationship, etc. In this patch, netdev_upper_dev_link() is used. 7. The seventh patch fixes bridge related problems. a) ->ndo_del_slave() doesn't work. b) It couldn't detect circular upper/lower interface relationship. c) It couldn't prevent stack overflow because of too deep depth of upper/lower interface d) It doesn't check the number of lower interfaces. e) Panics because of several reasons. These problems are actually the same problem. So, this patch fixes these problems. 8. The eighth patch fixes packet forwarding issue in bridge mode Packet forwarding is not working in rmnet bridge mode. Because when a packet is forwarded, skb_push() for an ethernet header is needed. But it doesn't call skb_push(). So, the ethernet header will be lost. Change log: - update commit logs. - drop two patches in this patchset because of wrong target branch. - ("net: rmnet: add missing module alias") - ("net: rmnet: print error message when command fails") - remove unneessary rcu_read_lock() in the third patch. - use rcu_dereference_bh() instead of rcu_dereference in third patch. - do not allow to add a bridge device if rmnet interface is already bridge mode in the seventh patch. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: fix packet forwarding in rmnet bridge modeTaehee Yoo1-0/+3
Packet forwarding is not working in rmnet bridge mode. Because when a packet is forwarded, skb_push() for an ethernet header is needed. But it doesn't call skb_push(). So, the ethernet header will be lost. Test commands: modprobe rmnet ip netns add nst ip netns add nst2 ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst2 ip link add rmnet0 link veth0 type rmnet mux_id 1 ip link set veth2 master rmnet0 ip link set veth0 up ip link set veth2 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ip netns exec nst ip link set veth1 up ip netns exec nst ip a a 192.168.100.2/24 dev veth1 ip netns exec nst2 ip link set veth3 up ip netns exec nst2 ip a a 192.168.100.3/24 dev veth3 ip netns exec nst2 ping 192.168.100.2 Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: fix bridge mode bugsTaehee Yoo4-77/+64
In order to attach a bridge interface to the rmnet interface, "master" operation is used. (e.g. ip link set dummy1 master rmnet0) But, in the rmnet_add_bridge(), which is a callback of ->ndo_add_slave() doesn't register lower interface. So, ->ndo_del_slave() doesn't work. There are other problems too. 1. It couldn't detect circular upper/lower interface relationship. 2. It couldn't prevent stack overflow because of too deep depth of upper/lower interface 3. It doesn't check the number of lower interfaces. 4. Panics because of several reasons. The root problem of these issues is actually the same. So, in this patch, these all problems will be fixed. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add dummy1 master rmnet0 type dummy ip link add dummy2 master rmnet0 type dummy ip link del rmnet0 ip link del dummy2 ip link del dummy1 Splat looks like: [ 41.867595][ T1164] general protection fault, probably for non-canonical address 0xdffffc0000000101I [ 41.869993][ T1164] KASAN: null-ptr-deref in range [0x0000000000000808-0x000000000000080f] [ 41.872950][ T1164] CPU: 0 PID: 1164 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 41.873915][ T1164] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 41.875161][ T1164] RIP: 0010:rmnet_unregister_bridge.isra.6+0x71/0xf0 [rmnet] [ 41.876178][ T1164] Code: 48 89 ef 48 89 c6 5b 5d e9 fc fe ff ff e8 f7 f3 ff ff 48 8d b8 08 08 00 00 48 ba 00 7 [ 41.878925][ T1164] RSP: 0018:ffff8880c4d0f188 EFLAGS: 00010202 [ 41.879774][ T1164] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000101 [ 41.887689][ T1164] RDX: dffffc0000000000 RSI: ffffffffb8cf64f0 RDI: 0000000000000808 [ 41.888727][ T1164] RBP: ffff8880c40e4000 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 41.889749][ T1164] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 1ffff110189a1e3c [ 41.890783][ T1164] R13: ffff8880c4d0f200 R14: ffffffffb8d56160 R15: ffff8880ccc2c000 [ 41.891794][ T1164] FS: 00007f4300edc0c0(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 41.892953][ T1164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.893800][ T1164] CR2: 00007f43003bc8c0 CR3: 00000000ca53e001 CR4: 00000000000606f0 [ 41.894824][ T1164] Call Trace: [ 41.895274][ T1164] ? rcu_is_watching+0x2c/0x80 [ 41.895895][ T1164] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 41.896687][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.897611][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.898508][ T1164] ? __module_text_address+0x13/0x140 [ 41.899162][ T1164] notifier_call_chain+0x90/0x160 [ 41.899814][ T1164] rollback_registered_many+0x660/0xcf0 [ 41.900544][ T1164] ? netif_set_real_num_tx_queues+0x780/0x780 [ 41.901316][ T1164] ? __lock_acquire+0xdfe/0x3de0 [ 41.901958][ T1164] ? memset+0x1f/0x40 [ 41.902468][ T1164] ? __nla_validate_parse+0x98/0x1ab0 [ 41.903166][ T1164] unregister_netdevice_many.part.133+0x13/0x1b0 [ 41.903988][ T1164] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: use upper/lower device infrastructureTaehee Yoo1-19/+16
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet1 link dummy0 type rmnet mux_id 1 for i in {2..100} do let A=$i-1 ip link add rmnet$i link rmnet$A type rmnet mux_id $i done ip link del dummy0 The purpose of the test commands is to make stack overflow. Splat looks like: [ 52.411438][ T1395] BUG: KASAN: slab-out-of-bounds in find_busiest_group+0x27e/0x2c00 [ 52.413218][ T1395] Write of size 64 at addr ffff8880c774bde0 by task ip/1395 [ 52.414841][ T1395] [ 52.430720][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.496511][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.513597][ T1395] Call Trace: [ 52.546516][ T1395] [ 52.558773][ T1395] Allocated by task 3171537984: [ 52.588290][ T1395] BUG: unable to handle page fault for address: ffffffffb999e260 [ 52.589311][ T1395] #PF: supervisor read access in kernel mode [ 52.590529][ T1395] #PF: error_code(0x0000) - not-present page [ 52.591374][ T1395] PGD d6818067 P4D d6818067 PUD d6819063 PMD 0 [ 52.592288][ T1395] Thread overran stack, or stack corrupted [ 52.604980][ T1395] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 52.605856][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.611764][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.621520][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.622296][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 52.627887][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 52.628735][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 52.631773][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 52.649584][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 52.674857][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 52.678257][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 52.694541][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 52.764039][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 52.815008][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 52.862312][ T1395] Call Trace: [ 52.887133][ T1395] Modules linked in: dummy rmnet veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_dex [ 52.936749][ T1395] CR2: ffffffffb999e260 [ 52.965695][ T1395] ---[ end trace 7e32ca99482dbb31 ]--- [ 52.966556][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.971083][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 53.003650][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 53.043183][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 53.076480][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 53.093858][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 53.112795][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 53.139837][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 53.141500][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 53.143343][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.152007][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 53.156459][ T1395] Kernel panic - not syncing: Fatal exception [ 54.213570][ T1395] Shutting down cpus with NMI [ 54.354112][ T1395] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0x) [ 54.355687][ T1395] Rebooting in 5 seconds.. Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: do not allow to change mux id if mux id is duplicatedTaehee Yoo1-0/+4
Basically, duplicate mux id isn't be allowed. So, the creation of rmnet will be failed if there is duplicate mux id is existing. But, changelink routine doesn't check duplicate mux id. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add rmnet1 link dummy0 type rmnet mux_id 2 ip link set rmnet1 type rmnet mux_id 1 Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()Taehee Yoo1-2/+0
The notifier_call() of the slave interface removes rmnet interface with unregister_netdevice_queue(). But, before calling unregister_netdevice_queue(), it acquires rcu readlock. In the RCU critical section, sleeping isn't be allowed. But, unregister_netdevice_queue() internally calls synchronize_net(), which would sleep. So, suspicious RCU usage warning occurs. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link del dummy0 Splat looks like: [ 79.639245][ T1195] ============================= [ 79.640134][ T1195] WARNING: suspicious RCU usage [ 79.640852][ T1195] 5.6.0-rc1+ #447 Not tainted [ 79.641657][ T1195] ----------------------------- [ 79.642472][ T1195] ./include/linux/rcupdate.h:273 Illegal context switch in RCU read-side critical section! [ 79.644043][ T1195] [ 79.644043][ T1195] other info that might help us debug this: [ 79.644043][ T1195] [ 79.645682][ T1195] [ 79.645682][ T1195] rcu_scheduler_active = 2, debug_locks = 1 [ 79.646980][ T1195] 2 locks held by ip/1195: [ 79.647629][ T1195] #0: ffffffffa3cf64f0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890 [ 79.649312][ T1195] #1: ffffffffa39256c0 (rcu_read_lock){....}, at: rmnet_config_notify_cb+0xf0/0x590 [rmnet] [ 79.651717][ T1195] [ 79.651717][ T1195] stack backtrace: [ 79.652650][ T1195] CPU: 3 PID: 1195 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 79.653702][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 79.655037][ T1195] Call Trace: [ 79.655560][ T1195] dump_stack+0x96/0xdb [ 79.656252][ T1195] ___might_sleep+0x345/0x440 [ 79.656994][ T1195] synchronize_net+0x18/0x30 [ 79.661132][ T1195] netdev_rx_handler_unregister+0x40/0xb0 [ 79.666266][ T1195] rmnet_unregister_real_device+0x42/0xb0 [rmnet] [ 79.667211][ T1195] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 79.668121][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.669166][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.670286][ T1195] ? __module_text_address+0x13/0x140 [ 79.671139][ T1195] notifier_call_chain+0x90/0x160 [ 79.671973][ T1195] rollback_registered_many+0x660/0xcf0 [ 79.672893][ T1195] ? netif_set_real_num_tx_queues+0x780/0x780 [ 79.675091][ T1195] ? __lock_acquire+0xdfe/0x3de0 [ 79.675825][ T1195] ? memset+0x1f/0x40 [ 79.676367][ T1195] ? __nla_validate_parse+0x98/0x1ab0 [ 79.677290][ T1195] unregister_netdevice_many.part.133+0x13/0x1b0 [ 79.678163][ T1195] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: fix suspicious RCU usageTaehee Yoo3-10/+9
rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_changelink()Taehee Yoo1-4/+2
In the rmnet_changelink(), it uses IFLA_LINK without checking NULL pointer. tb[IFLA_LINK] could be NULL pointer. So, NULL-ptr-deref could occur. rmnet already has a lower interface (real_dev). So, after this patch, rmnet_changelink() does not use IFLA_LINK anymore. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set rmnet0 type rmnet mux_id 2 Splat looks like: [ 90.578726][ T1131] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 90.581121][ T1131] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.582380][ T1131] CPU: 2 PID: 1131 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 90.584285][ T1131] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 90.587506][ T1131] RIP: 0010:rmnet_changelink+0x5a/0x8a0 [rmnet] [ 90.588546][ T1131] Code: 83 ec 20 48 c1 ea 03 80 3c 02 00 0f 85 6f 07 00 00 48 8b 5e 28 48 b8 00 00 00 00 00 0 [ 90.591447][ T1131] RSP: 0018:ffff8880ce78f1b8 EFLAGS: 00010247 [ 90.592329][ T1131] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff8880ce78f8b0 [ 90.593253][ T1131] RDX: 0000000000000000 RSI: ffff8880ce78f4a0 RDI: 0000000000000004 [ 90.594058][ T1131] RBP: ffff8880cf543e00 R08: 0000000000000002 R09: 0000000000000002 [ 90.594859][ T1131] R10: ffffffffc0586a40 R11: 0000000000000000 R12: ffff8880ca47c000 [ 90.595690][ T1131] R13: ffff8880ca47c000 R14: ffff8880cf545000 R15: 0000000000000000 [ 90.596553][ T1131] FS: 00007f21f6c7e0c0(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 90.597504][ T1131] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.599418][ T1131] CR2: 0000556e413db458 CR3: 00000000c917a002 CR4: 00000000000606e0 [ 90.600289][ T1131] Call Trace: [ 90.600631][ T1131] __rtnl_newlink+0x922/0x1270 [ 90.601194][ T1131] ? lock_downgrade+0x6e0/0x6e0 [ 90.601724][ T1131] ? rtnl_link_unregister+0x220/0x220 [ 90.602309][ T1131] ? lock_acquire+0x164/0x3b0 [ 90.602784][ T1131] ? is_bpf_image_address+0xff/0x1d0 [ 90.603331][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.603810][ T1131] ? kernel_text_address+0x111/0x140 [ 90.604419][ T1131] ? __kernel_text_address+0xe/0x30 [ 90.604981][ T1131] ? unwind_get_return_address+0x5f/0xa0 [ 90.605616][ T1131] ? create_prof_cpu_mask+0x20/0x20 [ 90.606304][ T1131] ? arch_stack_walk+0x83/0xb0 [ 90.606985][ T1131] ? stack_trace_save+0x82/0xb0 [ 90.607656][ T1131] ? stack_trace_consume_entry+0x160/0x160 [ 90.608503][ T1131] ? deactivate_slab.isra.78+0x2c5/0x800 [ 90.609336][ T1131] ? kasan_unpoison_shadow+0x30/0x40 [ 90.610096][ T1131] ? kmem_cache_alloc_trace+0x135/0x350 [ 90.610889][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.611512][ T1131] rtnl_newlink+0x65/0x90 [ ... ] Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_newlink()Taehee Yoo1-0/+5
rmnet registers IFLA_LINK interface as a lower interface. But, IFLA_LINK could be NULL. In the current code, rmnet doesn't check IFLA_LINK. So, panic would occur. Test commands: modprobe rmnet ip link add rmnet0 type rmnet mux_id 1 Splat looks like: [ 36.826109][ T1115] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 36.838817][ T1115] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 36.839908][ T1115] CPU: 1 PID: 1115 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 36.840569][ T1115] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 36.841408][ T1115] RIP: 0010:rmnet_newlink+0x54/0x510 [rmnet] [ 36.841986][ T1115] Code: 83 ec 18 48 c1 e9 03 80 3c 01 00 0f 85 d4 03 00 00 48 8b 6a 28 48 b8 00 00 00 00 00 c [ 36.843923][ T1115] RSP: 0018:ffff8880b7e0f1c0 EFLAGS: 00010247 [ 36.844756][ T1115] RAX: dffffc0000000000 RBX: ffff8880d14cca00 RCX: 1ffff11016fc1e99 [ 36.845859][ T1115] RDX: 0000000000000000 RSI: ffff8880c3d04000 RDI: 0000000000000004 [ 36.846961][ T1115] RBP: 0000000000000000 R08: ffff8880b7e0f8b0 R09: ffff8880b6ac2d90 [ 36.848020][ T1115] R10: ffffffffc0589a40 R11: ffffed1016d585b7 R12: ffffffff88ceaf80 [ 36.848788][ T1115] R13: ffff8880c3d04000 R14: ffff8880b7e0f8b0 R15: ffff8880c3d04000 [ 36.849546][ T1115] FS: 00007f50ab3360c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 36.851784][ T1115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.852422][ T1115] CR2: 000055871afe5ab0 CR3: 00000000ae246001 CR4: 00000000000606e0 [ 36.853181][ T1115] Call Trace: [ 36.853514][ T1115] __rtnl_newlink+0xbdb/0x1270 [ 36.853967][ T1115] ? lock_downgrade+0x6e0/0x6e0 [ 36.854420][ T1115] ? rtnl_link_unregister+0x220/0x220 [ 36.854936][ T1115] ? lock_acquire+0x164/0x3b0 [ 36.855376][ T1115] ? is_bpf_image_address+0xff/0x1d0 [ 36.855884][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.856304][ T1115] ? kernel_text_address+0x111/0x140 [ 36.856857][ T1115] ? __kernel_text_address+0xe/0x30 [ 36.857440][ T1115] ? unwind_get_return_address+0x5f/0xa0 [ 36.858063][ T1115] ? create_prof_cpu_mask+0x20/0x20 [ 36.858644][ T1115] ? arch_stack_walk+0x83/0xb0 [ 36.859171][ T1115] ? stack_trace_save+0x82/0xb0 [ 36.859710][ T1115] ? stack_trace_consume_entry+0x160/0x160 [ 36.860357][ T1115] ? deactivate_slab.isra.78+0x2c5/0x800 [ 36.860928][ T1115] ? kasan_unpoison_shadow+0x30/0x40 [ 36.861520][ T1115] ? kmem_cache_alloc_trace+0x135/0x350 [ 36.862125][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.864073][ T1115] rtnl_newlink+0x65/0x90 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27ARM: dts: bcm2711: Add pcie0 aliasNicolas Saenz Julienne1-0/+1
Some bcm2711 revisions have different DMA constraints on the their PCIE bus. The lower common denominator, being able to access the lower 3GB of memory, is the default setting for now. Newer SoC revisions are able to access the whole memory space. Raspberry Pi 4's firmware is aware of this limitation and will correct the PCIE's dma-ranges property if a pcie0 alias is available. So add it. Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Nicolas Saenz Julienne <[email protected]> Reviewed-by: Phil Elwell <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-02-27ARM: dts: bcm283x: Add missing properties to the PWR LEDStefan Wahren3-0/+6
This adds the missing properties to the PWR LED for the RPi 3 & 4 boards, which are already set for the other boards. Without them we will lose the LED state after suspend. Signed-off-by: Stefan Wahren <[email protected]> Tested-by: Peter Robinson <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-02-27Merge tag 'kbuild-fixes-v5.6-2' of ↵Linus Torvalds3-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix missed rebuild of DT schema check - add some phony targets to PHONY - fix comments and documents * tag 'kbuild-fixes-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: get rid of trailing slash from subdir- example kbuild: add dt_binding_check to PHONY in a correct place kbuild: add dtbs_check to PHONY kbuild: remove unneeded semicolon at the end of cmd_dtb_check kbuild: fix DT binding schema rule to detect command line changes kbuild: remove wrong documentation about mandatory-y kbuild: add comment for V=2 mode
2020-02-27net: phy: marvell: don't interpret PHY status unless resolvedRussell King1-0/+5
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Russell King <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27mlx5: register lag notifier for init network namespace onlyJiri Pirko5-14/+6
The current code causes problems when the unregistering netdevice could be different then the registering one. Since the check in mlx5_lag_netdev_event() does not allow any other network namespace anyway, fix this by registerting the lag notifier per init network namespace only. Fixes: d48834f9d4b4 ("mlx5: Use dev_net netdevice notifier registrations") Signed-off-by: Jiri Pirko <[email protected]> Tested-by: Aya Levin <[email protected]> Acked-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27Merge branch 'for-linus' of ↵Linus Torvalds9-36/+64
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - syzkaller-reported error handling fixes in various drivers, from various people - increase of HID report buffer size to 8K, which is apparently needed by certain modern devices - a few new device-ID-specific fixes / quirks - battery charging status reporting fix in logitech-hidpp, from Filipe Laíns * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hid-bigbenff: fix race condition for scheduled work during removal HID: hid-bigbenff: call hid_hw_stop() in case of error HID: hid-bigbenff: fix general protection fault caused by double kfree HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override HID: alps: Fix an error handling path in 'alps_input_configured()' HID: hiddev: Fix race in in hiddev_disconnect() HID: core: increase HID report buffer size to 8KiB HID: core: fix off-by-one memset in hid_report_raw_event() HID: apple: Add support for recent firmware on Magic Keyboards HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-27unix: define and set show_fdinfo only if procfs is enabledTobias Klauser1-0/+4
Follow the pattern used with other *_show_fdinfo functions and only define unix_show_fdinfo and set it in proto_ops if CONFIG_PROCFS is set. Fixes: 3c32da19a858 ("unix: Show number of pending scm files of receive queue in fdinfo") Signed-off-by: Tobias Klauser <[email protected]> Reviewed-by: Kirill Tkhai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27Merge branch 'hinic-BugFixes'David S. Miller6-5/+8
Luo bin says: ==================== hinic: BugFixes the bug fixed in patch #2 has been present since the first commit. the bugs fixed in patch #1 and patch #3 have been present since the following commits: patch #1: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") patch #3: 421e9526288b ("hinic: add rss support") ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.