aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-25ARM: 6637/1: Make the argument to virt_to_phys() "const volatile"Catalin Marinas1-1/+1
Changing the virt_to_phys() argument to "const volatile void *" avoids compiler warnings in some situations where this function is used. Signed-off-by: Catalin Marinas <[email protected]> Acked-by: Stephen Boyd <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-25ARM: twd: ensure timer reload is reprogrammed on entry to periodic modeRussell King1-5/+2
Ensure that the twd timer reload value is reprogrammed each time we enter periodic mode. This ensures that the reload value is always reset correctly. Tested-by: Santosh Shilimkar <[email protected]> Acked-by: Colin Cross <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-25ipv6: Revert 'administrative down' address handling changes.David S. Miller1-48/+33
This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <[email protected]> Tested-by: Eric W. Biederman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-25NFS: nfs_wcc_update_inode() should set nfsi->attr_gencountTrond Myklebust1-9/+17
If the call to nfs_wcc_update_inode() results in an attribute update, we need to ensure that the inode's attr_gencount gets bumped too, otherwise we are not protected against races with other GETATTR calls. Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS improve pnfs_put_deviceid_cache debug printAndy Adamson1-1/+1
What we really want to know is the ref count. Signed-off-by: Andy Adamson <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS fix cb_sequence error processingAndy Adamson1-1/+1
Always assign the cb_process_state nfs_client pointer so a processing error in cb_sequence after the nfs_client is found and referenced returns a non-NULL cb_process_state nfs_client and the matching nfs_put_client in nfs4_callback_compound dereferences the client. Signed-off-by: Andy Adamson <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS do not find client in NFSv4 pg_authenticateAndy Adamson10-128/+42
The information required to find the nfs_client cooresponding to the incoming back channel request is contained in the NFS layer. Perform minimal checking in the RPC layer pg_authenticate method, and push more detailed checking into the NFS layer where the nfs_client can be found. Signed-off-by: Andy Adamson <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"Chuck Lever1-4/+5
Nick Bowler <[email protected]> reports: > We were just having some NFS server troubles, and my client machine > running 2.6.38-rc1+ (specifically, commit 2b1caf6ed7b888c95) crashed > hard (syslog output appended to this mail). > > I'm not sure what the exact timeline was or how to reproduce this, > but the server was rebooted during all this. Since I've never seen > this happen before, it is possibly a regression from previous kernel > releases. However, I recently updated my nfs-utils (on the client) to > version 1.2.3, so that might be related as well. [ BUG output redacted ] When done searching, the for_each_host loop in next_host_state() falls through and returns the final host on the host chain without bumping it's reference count. Since the host's ref count is only one at that point, releasing the host in nlm_host_rebooted() attempts to destroy the host prematurely, and therefore hits a BUG(). Likely, the original intent of the for_each_host behavior in next_host_state() was to handle the case when the host chain is empty. Searching the chain and finding no suitable host to return needs to be handled as well. Defensively restructure next_host_state() always to return NULL when the loop falls through. Introduced by commit b10e30f6 "lockd: reorganize nlm_host_rebooted". Cc: J. Bruce Fields <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS: Prevent memory allocation failure in nfsacl_encode()Chuck Lever4-13/+31
nfsacl_encode() allocates memory in certain cases. This of course is not guaranteed to work. Since commit 9f06c719 "SUNRPC: New xdr_streams XDR encoder API", the kernel's XDR encoders can't return a result indicating possibly a failure, so a memory allocation failure in nfsacl_encode() has become fatal (ie, the XDR code Oopses) in some cases. However, the allocated memory is a tiny fixed amount, on the order of 40-50 bytes. We can easily use a stack-allocated buffer for this, with only a wee bit of nose-holding. Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS: nfsacl_{encode,decode} should return signed integerChuck Lever2-8/+28
Clean up. The nfsacl_encode() and nfsacl_decode() functions return negative errno values, and each call site verifies that the returned value is not negative. Change the synopsis of both of these functions to reflect this usage. Document the synopsis and return values. Reported-by: Trond Myklebust <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"Chuck Lever1-1/+4
Milan Broz <[email protected]> reports: > on today Linus' tree I get OOps if using nfs. > > server (2.6.36) exports dir: > /dir 172.16.1.0/24(rw,async,all_squash,no_subtree_check,anonuid=500,anongid=500) > > on client it is mounted in fstab > server:/dir /mnt/tst nfs rw,soft 0 0 > > and these commands OOpses it (simplified from a configure script): > > cd /dir > touch x > install x y > > [ 105.327701] ------------[ cut here ]------------ > [ 105.327979] kernel BUG at fs/nfs/nfs3xdr.c:1338! > [ 105.328075] invalid opcode: 0000 [#1] PREEMPT SMP > [ 105.328223] last sysfs file: /sys/devices/virtual/bdi/0:16/uevent > [ 105.328349] Modules linked in: usbcore dm_mod > [ 105.328553] > [ 105.328678] Pid: 3710, comm: install Not tainted 2.6.37+ #423 440BX Desktop Reference Platform/VMware Virtual Platform > [ 105.328853] EIP: 0060:[<c116c06c>] EFLAGS: 00010282 CPU: 0 > [ 105.329152] EIP is at nfs3_xdr_enc_setacl3args+0x61/0x98 > [ 105.329249] EAX: ffffffea EBX: ce941d98 ECX: 00000000 EDX: 00000004 > [ 105.329340] ESI: ce941cd0 EDI: 000000a4 EBP: ce941cc0 ESP: ce941cb4 > [ 105.329431] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 105.329525] Process install (pid: 3710, ti=ce940000 task=ced36f20 task.ti=ce940000) > [ 105.336600] Stack: > [ 105.336693] ce941cd0 ce9dc000 00000000 ce941cf8 c12ecd02 c12f43e0 c116c00b cf754158 > [ 105.336982] ce9dc004 cf754284 ce9dc004 cf7ffee8 ceff9978 ce9dc000 cf7ffee8 ce9dc000 > [ 105.337182] ce9dc000 ce941d14 c12e698d cf75412c ce941d98 cf7ffee8 cf7fff20 00000000 > [ 105.337405] Call Trace: > [ 105.337695] [<c12ecd02>] rpcauth_wrap_req+0x75/0x7f > [ 105.337806] [<c12f43e0>] ? xdr_encode_opaque+0x12/0x15 > [ 105.337898] [<c116c00b>] ? nfs3_xdr_enc_setacl3args+0x0/0x98 > [ 105.337988] [<c12e698d>] call_transmit+0x17e/0x1e8 > [ 105.338072] [<c12ec307>] __rpc_execute+0x6d/0x1a6 > [ 105.338155] [<c12ec474>] rpc_execute+0x34/0x37 > [ 105.338235] [<c12e738d>] rpc_run_task+0xb5/0xbd > [ 105.338316] [<c12e7474>] rpc_call_sync+0x3d/0x58 > [ 105.338402] [<c116d0c6>] nfs3_proc_setacls+0x18e/0x24f > [ 105.338493] [<c10b3f76>] ? __kmalloc+0x148/0x1c4 > [ 105.338579] [<c10ecd01>] ? posix_acl_alloc+0x12/0x22 > [ 105.338665] [<c116d5c8>] nfs3_proc_setacl+0xa0/0xca > [ 105.338748] [<c116d69c>] nfs3_setxattr+0x62/0x88 > [ 105.338834] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.338926] [<c116d63a>] ? nfs3_setxattr+0x0/0x88 > [ 105.339026] [<c10cfa79>] __vfs_setxattr_noperm+0x26/0x95 > [ 105.339114] [<c10cfb43>] vfs_setxattr+0x5b/0x76 > [ 105.339211] [<c10cfbfb>] setxattr+0x9d/0xc3 > [ 105.339298] [<c10a2ea8>] ? handle_pte_fault+0x258/0x5cb > [ 105.339428] [<c1091ff6>] ? __free_pages+0x1a/0x23 > [ 105.339517] [<c10498ea>] ? up_read+0x16/0x2c > [ 105.339599] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339677] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339760] [<c1025d23>] ? get_parent_ip+0xb/0x31 > [ 105.339843] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.339931] [<c10cfc72>] sys_fsetxattr+0x51/0x79 > [ 105.340014] [<c1002853>] sysenter_do_call+0x12/0x32 > [ 105.340133] Code: 2e 76 18 00 58 31 d2 8b 7f 28 f6 43 04 01 74 03 8b 53 08 6a 00 8b 46 04 6a 01 8b 0b 52 89 fa e8 85 10 f8 ff 83 c4 0c 85 c0 79 04 <0f> 0b eb fe 31 c9 f6 43 04 04 74 03 8b 4b 0c 68 00 10 00 00 8d > [ 105.350321] EIP: [<c116c06c>] nfs3_xdr_enc_setacl3args+0x61/0x98 SS:ESP 0068:ce941cb4 > [ 105.364385] ---[ end trace 01fcfe7f0f7f6e4a ]--- nfs3_xdr_enc_setacl3args() is not properly setting up the target buffer before nfsacl_encode() attempts to encode the ACL. Introduced by commit d9c407b1 "NFS: Introduce new-style XDR encoding functions for NFSv3." Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS: Fix "kernel BUG at fs/aio.c:554!"Chuck Lever1-14/+20
Nick Piggin reports: > I'm getting use after frees in aio code in NFS > > [ 2703.396766] Call Trace: > [ 2703.396858] [<ffffffff8100b057>] ? native_sched_clock+0x27/0x80 > [ 2703.396959] [<ffffffff8108509e>] ? put_lock_stats+0xe/0x40 > [ 2703.397058] [<ffffffff81088348>] ? lock_release_holdtime+0xa8/0x140 > [ 2703.397159] [<ffffffff8108a2a5>] lock_acquire+0x95/0x1b0 > [ 2703.397260] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397361] [<ffffffff81039701>] ? get_parent_ip+0x11/0x50 > [ 2703.397464] [<ffffffff81612a31>] _raw_spin_lock_irq+0x41/0x80 > [ 2703.397564] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397662] [<ffffffff811627db>] aio_put_req+0x2b/0x60 > [ 2703.397761] [<ffffffff811647fe>] do_io_submit+0x2be/0x7c0 > [ 2703.397895] [<ffffffff81164d0b>] sys_io_submit+0xb/0x10 > [ 2703.397995] [<ffffffff8100307b>] system_call_fastpath+0x16/0x1b > > Adding some tracing, it is due to nfs completing the request then > returning something other than -EIOCBQUEUED, so aio.c > also completes the request. To address this, prevent the NFS direct I/O engine from completing async iocbs when the forward path returns an error without starting any I/O. This fix appears to survive ^C during both "xfstest no. 208" and "fsx -Z." It's likely this bug has existed for a very long while, as we are seeing very similar symptoms in OEL 5. Copying stable. Cc: Stable <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().Jesper Juhl1-2/+7
On Mon, 17 Jan 2011, Mi Jinlong wrote: > > > Jesper Juhl: > > strrchr() can return NULL if nothing is found. If this happens we'll > > dereference a NULL pointer in > > fs/nfs/nfs4filelayoutdev.c::decode_and_add_ds(). > > > > I tried to find some other code that guarantees that this can never > > happen but I was unsuccessful. So, unless someone else can point to some > > code that ensures this can never be a problem, I believe this patch is > > needed. > > > > While I was changing this code I also noticed that all the dprintk() > > statements, except one, start with "%s:". The one missing the ":" I added > > it to. > > Maybe another one also should be changed at decode_and_add_ds() at line 243: > > 243 printk("%s Decoded address and port %s\n", __func__, buf); > Missed that one. Thanks. Signed-off-by: Jesper Juhl <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-01-25PM / Runtime: Don't enable interrupts while running in_interruptAlan Stern1-3/+6
This patch (as1445) fixes a bug in the runtime PM core left over from the addition of the no_callbacks flag. If this flag is set then it is possible for rpm_suspend() to be called in_interrupt, so when releasing spinlocks it's important not to re-enable interrupts. To avoid an unnecessary save-and-restore of the interrupt flag, the patch also inlines a pm_request_idle() call. This fixes Bugzilla #27482. (The offending code was added in 2.6.37, so it's not necessary to apply this to any earlier stable kernels.) Signed-off-by: Alan Stern <[email protected]> Reported-by: tim blechmann <[email protected]> CC: <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2011-01-25CIFS: Add strictcache mount optionPavel Shilovsky2-0/+10
Use for switching on strict cache mode. In this mode the client reads from the cache all the time it has Oplock Level II, otherwise - read from the server. As for write - the client stores a data in the cache in Exclusive Oplock case, otherwise - write directly to the server. Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-01-25CIFS: Implement cifs_strict_writev (try #4)Pavel Shilovsky4-6/+217
If we don't have Exclusive oplock we write a data to the server. Also set invalidate_mapping flag on the inode if we wrote something to the server. Add cifs_iovec_write to let the client write iovec buffers through CIFSSMBWrite2. Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-01-25[CIFS] Replace cifs md5 hashing functions with kernel crypto APIsSteve French6-416/+51
Replace remaining use of md5 hash functions local to cifs module with kernel crypto APIs. Remove header and source file containing those local functions. Signed-off-by: Shirish Pargaonkar <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-01-25ALSA: HDA: Fix dmesg output of HDMI supported bitsDavid Henningsson1-1/+1
This typo caused the dmesg output of the supported bits of HDMI to be cut off early. Cc: [email protected] Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-01-25hwmon: (lis3) turn down the no IRQ messageKalhan Trisal1-1/+1
Turn down the no IRQ message - on some platforms that's a normal state of affairs. Signed-off-by: Kalhan Trisal <[email protected]> Signed-off-by: Alan Cox <[email protected]> Acked-by: Eric Piel <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2011-01-25ALSA: fix invalid hardware.h include in ac97c for AVR32 architectureHans-Christian Egtvedt1-1/+4
This patch fixes the non-compiling AC97C driver for AVR32 architecture by include mach/hardware.h only for AT91 architecture. The AVR32 architecture does not supply the hardware.h include file. Signed-off-by: Hans-Christian Egtvedt <[email protected]> CC: [email protected] Signed-off-by: Takashi Iwai <[email protected]>
2011-01-25ARM: 6635/2: Configure reference clock for Versatile Express timersPawel Moll2-0/+15
Timers on Versatile Express mainboard are used as system clock/event sources. Driver assumes that they are clocked with 1MHz signal. Old V2M firmware apparently configured it by default, but on newer boards one can observe that "sleep 1" command takes over 30 seconds to finish, as the timers are fed with 32kHz instead... This patch performs required magic and also removes code clearing timer's control registers, as exactly the same operations are performed by the timer driver few jiffies later. Signed-off-by: Pawel Moll <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-25ceph: avoid picking MDS that is not activeSage Weil1-3/+7
Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <[email protected]>
2011-01-25ASoC: correct link specifications for corgi, poodle and spitzDmitry Eremin-Solenikov3-5/+5
ASoC DAI link descriptions for Corgi, Poodle and Spitz platforms contained incorrect names for cpu_dai and codec, which effectievly disabled sound on theese platforms. Fix that errors. Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2011-01-25ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2sLars-Peter Clausen5-5/+5
During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Jassi Brar <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2011-01-25ASoC: Fix codec device id format used by some dai_linksLars-Peter Clausen6-8/+8
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2011-01-25ARM: versatile: name configuration options after actual board namesRussell King1-4/+6
Update the option text to those which appear on the front of the appropriate board user guides. This gives consistent board naming, and makes it obvious which option is for which platform. Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-25ARM: realview: name configuration options after actual board namesRussell King1-22/+27
As no one seems to really know which configuration options tie up with which boards, I thought I'd do some investigation and try to work it out. After discussion with some folk in linaro, I think I have this nailed. The names are updated to use the name on the front of the appropriate board user guide for the various baseboards, which I've taken to be the official name for each board. I haven't significantly updated the descriptions for the tiles as that is even less clear - as far as I can see on ARMs website, there is no Cortex-A9 tile for Realview EB - only ARM11MPCore, ARM1156T2F-S, ARM1176TZF-S and Cortex-R4F. So exactly what this 'Multicore Cortex-A9 Tile' is... Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-25ARM: realview,vexpress: fix section mismatch warning for pen_releaseRussell King2-2/+2
Fix two section mismatch warnings in the platform SMP bringup code for Realview and Versatile Express: WARNING: arch/arm/mach-realview/built-in.o(.text+0x8ac): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. WARNING: arch/arm/mach-vexpress/built-in.o(.text+0x7b4): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. Signed-off-by: Russell King <[email protected]>
2011-01-24textsearch: doc - fix spelling in lib/textsearch.c.Jesper Dangaard Brouer1-5/+5
Found the following spelling errors while reading the textsearch code: "facitilies" -> "facilities" "continously" -> "continuously" "arbitary" -> "arbitrary" "patern" -> "pattern" "occurences" -> "occurrences" I'll try to push this patch through DaveM, given the only users of textsearch is in the net/ tree (nf_conntrack_amanda.c, xt_string.c and em_text.c) Signed-off-by: Jesper Sander <[email protected]> Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-24USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()Jesper Juhl1-0/+1
We will leak the storage allocated by request_firmware() if the size of the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE. This removes the leak by calling release_firmware() before we return -ENOSPC. Signed-off-by: Jesper Juhl <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-24pch_gbe: don't use flush_scheduled_work()Tejun Heo1-1/+1
Directly cancel adapter->reset_task instead of using to-be-deprecated flush_scheduled_work(). Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-24bnx2: Always set ETH_FLAG_TXVLANMichael Chan1-0/+4
TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-25ALSA: azt3328 - fix broken AZF_FMT_XLATE macroAndreas Mohr1-22/+16
Cleanly revert to non-macro implementation of snd_azf3328_codec_setfmt(), to fix last-minute functionality breakage induced by following checkpatch.pl recommendations without giving them their due full share of thought ("revolting computer, ensuing PEBKAC"). I would like to thank Jiri Slaby for his very timely (in -rc1 even) and unexpected (uncommon hardware) "recognition of the dangerous situation" due to his very commendable static parser use. :) Reported-by: Jiri Slaby <[email protected]> Signed-off-by: Andreas Mohr <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-01-25mailmap: Add an entry for Axel Lin.Paul Mundt1-0/+1
Not all of Axel's patches have used a consistent casing, so fix it up here. Signed-off-by: Paul Mundt <[email protected]>
2011-01-25video: fix some comments in drivers/video/console/vgacon.cAmerigo Wang1-5/+1
Now vgacon_scrollback_startup() uses slab, not bootmem, the comment above it is obsolete, so does __init_refok. Signed-off-by: WANG Cong <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-25drivers/video/bf537-lq035.c: Add missing IS_ERR testJulia Lawall1-25/+33
lcd_device_register may return ERR_PTR, so a check is added for this value before the dereference. All of the other changes reorganize the error handling code in this function to avoid duplicating all of it in the added case. In the original code, in one case, the global variable fb_buffer was set to NULL in error code that appears after this variable is initialized. This is done now in all error handling code that has this property. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Acked-by: Mike Frysinger <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-25video: pxa168fb: remove a redundant pxa168fb_check_var callaxel lin1-5/+1
Current implementation calls pxa168fb_check_var twice in pxa168fb_probe. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-25video: da8xx-fb: fix fb_probe error pathaxel lin1-1/+2
Current implementation puts CONFIG_CPU_FREQ at wrong place, CONFIG_CPU_FREQ is for lcd_da8xx_cpufreq_deregister not for unregister_framebuffer. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-25sh: Fix build of sh7750 base boardsNobuhiro Iwamatsu1-3/+3
Renamed platform_register_device to platform_device_register. Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-01-24net: clear heap allocation for ethtool_get_regs()Eugene Teo1-1/+1
There is a conflict between commit b00916b1 and a77f5db3. This patch resolves the conflict by clearing the heap allocation in ethtool_get_regs(). Cc: [email protected] Signed-off-by: Eugene Teo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds3-3/+43
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: Make CIFS mount work in a container. CIFS: Remove pointless variable assignment in cifs_dfs_do_automount()
2011-01-25drm/nvc0/grctx: correct an off-by-oneBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nv50: Fix race with PFIFO during PGRAPH context destruction.Francisco Jerez1-0/+3
Reported-by: Xavier Chantry <[email protected]> Signed-off-by: Francisco Jerez <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.Francisco Jerez1-0/+15
Fixes the DVI-D output on that board (fdo bug 32645). Reported-by: Bryan Quigley <[email protected]> Signed-off-by: Francisco Jerez <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nvc0: implement irq handler for whatever's at 0x14xxxxBen Skeggs1-0/+19
This is just barely enough to stop a never-ending IRQ storm that can be triggered by our 3D driver. We have no idea what this engine is.. Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nvc0: fix incorrect TPC register setupBen Skeggs1-2/+2
Was hitting TPC+1's regs by accident, oops. Reported-by: Christoph Bumiller <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nouveau: probe for adt7473 before f75375Ben Skeggs1-1/+1
There's a reported case where probing for f75375 causes the system to hang completely, in this case there's an adt7473 at the same i2c address. Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25drm/nouveau: remove dead function definitionBen Skeggs1-3/+0
Signed-off-by: Ben Skeggs <[email protected]>
2011-01-25Merge branch 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds1-30/+22
* 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msm: drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-25Merge branch 'drm-fixes' of ↵Linus Torvalds24-95/+203
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq drm/i915: Prevent uninitialised reads during error state capture drm/i915: Use consistent mappings for OpRegion between ACPI and i915 drm/i915: Handle the no-interrupts case for UMS by polling drm/i915: Disable high-precision vblank timestamping for UMS drm/i915: Increase the amount of defense before computing vblank timestamps drm/i915,agp/intel: Do not clear stolen entries drm/radeon/kms: simplify atom adjust pll setup drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics drm/radeon/kms: make the mac rv630 quirk generic drm/radeon/kms: fix a spelling error in an error message drm/radeon/kms: Initialize pageflip spinlocks. drm/i915: Recognise non-VGA display devices drm/i915: Fix use of invalid array size for ring->sync_seqno drm/i915/ringbuffer: Fix use of stale HEAD position whilst polling for space drm/i915: Don't kick-off hangcheck after a DRI interrupt drm/i915: Add dependency on CONFIG_TMPFS drm/i915: Initialise ring vfuncs for old DRI paths drm/i915: make the blitter report buffer modifications to the FBC unit drm/i915: set more FBC chicken bits
Powered by cgit, Gruvboxed by Blaster4385.