aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-22MAINTAINERS: update Mark Fasheh's e-mailMark Fasheh1-1/+1
I'd like to use my personal e-mail for Ocfs2 requests and review. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mark Fasheh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-22mm/mempolicy.c: avoid use uninitialized preferred_nodeYisheng Xie1-0/+3
Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [[email protected]: slight comment tweak] Link: http://lkml.kernel.org/r/[email protected] Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by: Yisheng Xie <[email protected]> Reported-by: Alexander Potapenko <[email protected]> Tested-by: Alexander Potapenko <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-23drm/ast: Fixed 1280x800 Display IssueY.C. Chen1-2/+2
The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz. Here is the update to fix it. Signed-off-by: Y.C. Chen <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2018-03-22Merge tag 'acpi-4.16-rc7' of ↵Linus Torvalds3-48/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one recent commit that added incorrect battery quirks for some Asus systems and fix an off-by-one error in the watchdog driver based on the ACPI WDAT table. Specifics: - Revert the recent change adding battery quirks for Asus GL502VSK and UX305LA as these quirks turn out to be inadequate and possibly premature (Daniel Drake). - Fix an off-by-one error in the resource allocation part of the watchdog driver based on the ACPI WDAT table (Takashi Iwai)" * tag 'acpi-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / watchdog: Fix off-by-one error at resource assignment Revert "ACPI / battery: Add quirk for Asus GL502VSK and UX305LA"
2018-03-22Merge tag 'modules-for-v4.16-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: "Propagate error in modules_open() to avoid possible later NULL dereference if seq_open() had failed" * tag 'modules-for-v4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: propagate error in modules_open()
2018-03-22Merge branch 'acpi-wdat'Rafael J. Wysocki2-3/+3
* acpi-wdat: ACPI / watchdog: Fix off-by-one error at resource assignment
2018-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds211-1152/+2086
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-22Merge tag 'mmc-v4.16-rc4' of ↵Linus Torvalds7-9/+46
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes intended for v4.16-rc7: MMC host: - dw_mmc: Fix the suspend/resume issue for Exynos5433 - dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems - dw_mmc: Make PIO mode work when failing with idmac when dw_mci_reset occurs - sdhci-acpi: Re-allow IRQ 0 to fix broken probe MMC core: - Update EXT_CSD caches to correctly switch partition for ioctl calls - Fix tracepoint print of blk_addr and blksz - Disable HPI on broken Micron (Numonyx) eMMC cards" * tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Fix IRQ 0 mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs mmc: core: Fix tracepoint print of blk_addr and blksz mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433 mmc: block: fix updating ext_csd caches on ioctl call mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
2018-03-23Merge tag 'drm-misc-fixes-2018-03-22' of ↵Dave Airlie5-8/+22
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Main change is a patch to reject getfb call for multiplanar framebuffers, then we have a couple of error path fixes on the sun4i driver. Still on that driver there is a clk fix and finally a mmap offset fix on the udl driver. * tag 'drm-misc-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-misc: drm: udl: Properly check framebuffer mmap offsets drm: Reject getfb for multi-plane framebuffers drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()' drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()' drm/sun4i: Fix an error handling path in 'sun4i_drv_bind()' drm/sun4i: Fix exclusivity of the TCON clocks
2018-03-23Merge tag 'drm-intel-fixes-2018-03-21' of ↵Dave Airlie2-7/+4
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One fix for DP MST and one fix for GPU reset on hang check. * tag 'drm-intel-fixes-2018-03-21' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
2018-03-23Merge branch 'vmwgfx-fixes-4.16' of ↵Dave Airlie6-17/+59
git://people.freedesktop.org/~thomash/linux into drm-fixes Two vmwgfx fixes for 4.16. Both cc'd stable. * 'vmwgfx-fixes-4.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a destoy-while-held mutex problem. drm/vmwgfx: Fix black screen and device errors when running without fbdev
2018-03-23Merge tag 'imx-drm-fixes-2018-03-22' of ↵Dave Airlie3-7/+20
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: fixes for early vblank event issue, array underflow error - fix an array underflow error by reordering the range check before the array subscript in ipu-prg. - make some local functions static in ipuv3-plane. - add a missng header for ipu_planes_assign_pre in ipuv3-plane. - move arming of the vblank event from atomic_begin to atomic_flush, to avoid signalling atomic commit completion to userspace before plane atomic_update has finished, due to a race condition that is likely to be hit on i.MX6QP on PRE enabled channels. * tag 'imx-drm-fixes-2018-03-22' of git://git.pengutronix.de/git/pza/linux: drm/imx: move arming of the vblank event to atomic_flush drm/imx: ipuv3-plane: Include "imx-drm.h" header file drm/imx: ipuv3-plane: Make functions static when possible gpu: ipu-v3: prg: avoid possible array underflow
2018-03-22macsec: missing dev_put() on error in macsec_newlink()Dan Carpenter1-2/+3
We moved the dev_hold(real_dev); call earlier in the function but forgot to update the error paths. Fixes: 0759e552bce7 ("macsec: fix negative refcnt on parent link") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge tag 'mac80211-for-davem-2018-03-21' of ↵David S. Miller5-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two more fixes (in three patches): * ath9k_htc doesn't like QoS NDP frames, use regular ones * hwsim: set up wmediumd for radios created later ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: dsa: Fix functional dsa-loop dependency on FIXED_PHYFlorian Fainelli1-1/+4
We have a functional dependency on the FIXED_PHY MDIO bus because we register fixed PHY devices "the old way" which only works if the code that does this has had a chance to run before the fixed MDIO bus is probed. Make sure we account for that and have dsa_loop_bdinfo.o be either built-in or modular depending on whether CONFIG_FIXED_PHY reflects that too. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge branch 'hv_netvsc-fix-races-during-shutdown-and-changes'David S. Miller4-183/+204
Stephen Hemminger says: ==================== hv_netvsc: fix races during shutdown and changes This set of patches fixes issues identified by Vitaly Kuznetsov and Mohammed Gamal related to state changes in Hyper-v network driver. A lot of the issues are because setting up the netvsc device requires a second step (in work queue) to get all the sub-channels running. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22hv_netvsc: common detach logicStephen Hemminger4-143/+173
Make common function for detaching internals of device during changes to MTU and RSS. Make sure no more packets are transmitted and all packets have been received before doing device teardown. Change the wait logic to be common and use usleep_range(). Changes transmit enabling logic so that transmit queues are disabled during the period when lower device is being changed. And enabled only after sub channels are setup. This avoids issue where it could be that a packet was being sent while subchannel was not initialized. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22hv_netvsc: change GPAD teardown order on older versionsStephen Hemminger1-1/+6
On older versions of Windows, the host ignores messages after vmbus channel is closed. Workaround this by doing what Windows does and send the teardown before close on older versions of NVSP protocol. Reported-by: Mohammed Gamal <[email protected]> Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22hv_netvsc: use RCU to fix concurrent rx and queue changesStephen Hemminger2-35/+21
The receive processing may continue to happen while the internal network device state is in RCU grace period. The internal RNDIS structure is associated with the internal netvsc_device structure; both have the same RCU lifetime. Defer freeing all associated parts until after grace period. Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22hv_netvsc: disable NAPI before channel closeStephen Hemminger1-4/+4
This makes sure that no CPU is still process packets when the channel is closed. Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net/ipv6: Handle onlink flag with multipath routesDavid Ahern1-0/+1
For multipath routes the ONLINK flag can be specified per nexthop in rtnh_flags or globally in rtm_flags. Update ip6_route_multipath_add to consider the ONLINK setting coming from rtnh_flags. Each loop over nexthops the config for the sibling route is initialized to the global config and then per nexthop settings overlayed. The flag is 'or'ed into fib6_config to handle the ONLINK flag coming from either rtm_flags or rtnh_flags. Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22ppp: avoid loop in xmit recursion detection codeGuillaume Nault1-12/+14
We already detect situations where a PPP channel sends packets back to its upper PPP device. While this is enough to avoid deadlocking on xmit locks, this doesn't prevent packets from looping between the channel and the unit. The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq before checking for xmit recursion. Therefore, __ppp_xmit_process() might dequeue a packet from ppp->file.xq and send it on the channel which, in turn, loops it back on the unit. Then ppp_start_xmit() queues the packet back to ppp->file.xq and __ppp_xmit_process() picks it up and sends it again through the channel. Therefore, the packet will loop between __ppp_xmit_process() and ppp_start_xmit() until some other part of the xmit path drops it. For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops the packet after a few iterations. But PPTP reallocates the headroom if necessary, letting the loop run and exhaust the machine resources (as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109). Fix this by letting __ppp_xmit_process() enqueue the skb to ppp->file.xq, so that we can check for recursion before adding it to the queue. Now ppp_xmit_process() can drop the packet when recursion is detected. __ppp_channel_push() is a bit special. It calls __ppp_xmit_process() without having any actual packet to send. This is used by ppp_output_wakeup() to re-enable transmission on the parent unit (for implementations like ppp_async.c, where the .start_xmit() function might not consume the skb, leaving it in ppp->xmit_pending and disabling transmission). Therefore, __ppp_xmit_process() needs to handle the case where skb is NULL, dequeuing as many packets as possible from ppp->file.xq. Reported-by: xu heng <[email protected]> Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22ipv6: sr: fix NULL pointer dereference when setting encap source addressDavid Lebrun1-2/+3
When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the source address of the outer IPv6 header, in case none was specified. Using skb->dev can lead to BUG() when it is in an inconsistent state. This patch uses the net_device attached to the skb's dst instead. [940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c [940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0 [940807.815725] PGD 0 P4D 0 [940807.847173] Oops: 0000 [#1] SMP PTI [940807.890073] Modules linked in: [940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W 4.16.0-rc1-seg6bpf+ #2 [940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26 09/06/2010 [940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0 [940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206 [940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe [940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500 [940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff [940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850 [940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002 [940808.684675] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [940808.783036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0 [940808.939634] Call Trace: [940808.970041] <IRQ> [940808.995250] ? ip6t_do_table+0x265/0x640 [940809.043341] seg6_do_srh_encap+0x28f/0x300 [940809.093516] ? seg6_do_srh+0x1a0/0x210 [940809.139528] seg6_do_srh+0x1a0/0x210 [940809.183462] seg6_output+0x28/0x1e0 [940809.226358] lwtunnel_output+0x3f/0x70 [940809.272370] ip6_xmit+0x2b8/0x530 [940809.313185] ? ac6_proc_exit+0x20/0x20 [940809.359197] inet6_csk_xmit+0x7d/0xc0 [940809.404173] tcp_transmit_skb+0x548/0x9a0 [940809.453304] __tcp_retransmit_skb+0x1a8/0x7a0 [940809.506603] ? ip6_default_advmss+0x40/0x40 [940809.557824] ? tcp_current_mss+0x24/0x90 [940809.605925] tcp_retransmit_skb+0xd/0x80 [940809.654016] tcp_xmit_retransmit_queue.part.17+0xf9/0x210 [940809.719797] tcp_ack+0xa47/0x1110 [940809.760612] tcp_rcv_established+0x13c/0x570 [940809.812865] tcp_v6_do_rcv+0x151/0x3d0 [940809.858879] tcp_v6_rcv+0xa5c/0xb10 [940809.901770] ? seg6_output+0xdd/0x1e0 [940809.946745] ip6_input_finish+0xbb/0x460 [940809.994837] ip6_input+0x74/0x80 [940810.034612] ? ip6_rcv_finish+0xb0/0xb0 [940810.081663] ipv6_rcv+0x31c/0x4c0 ... Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Tom Herbert <[email protected]> Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel stateDavid Lebrun1-1/+1
The seg6_build_state() function is called with RCU read lock held, so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead. [ 92.770271] ============================= [ 92.770628] WARNING: suspicious RCU usage [ 92.770921] 4.16.0-rc4+ #12 Not tainted [ 92.771277] ----------------------------- [ 92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 92.772279] [ 92.772279] other info that might help us debug this: [ 92.772279] [ 92.773067] [ 92.773067] rcu_scheduler_active = 2, debug_locks = 1 [ 92.773514] 2 locks held by ip/2413: [ 92.773765] #0: (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0 [ 92.774377] #1: (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210 [ 92.775065] [ 92.775065] stack backtrace: [ 92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12 [ 92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 [ 92.776608] Call Trace: [ 92.776852] dump_stack+0x7d/0xbc [ 92.777130] __schedule+0x133/0xf00 [ 92.777393] ? unwind_get_return_address_ptr+0x50/0x50 [ 92.777783] ? __sched_text_start+0x8/0x8 [ 92.778073] ? rcu_is_watching+0x19/0x30 [ 92.778383] ? kernel_text_address+0x49/0x60 [ 92.778800] ? __kernel_text_address+0x9/0x30 [ 92.779241] ? unwind_get_return_address+0x29/0x40 [ 92.779727] ? pcpu_alloc+0x102/0x8f0 [ 92.780101] _cond_resched+0x23/0x50 [ 92.780459] __mutex_lock+0xbd/0xad0 [ 92.780818] ? pcpu_alloc+0x102/0x8f0 [ 92.781194] ? seg6_build_state+0x11d/0x240 [ 92.781611] ? save_stack+0x9b/0xb0 [ 92.781965] ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0 [ 92.782480] ? seg6_build_state+0x11d/0x240 [ 92.782925] ? lwtunnel_build_state+0x1bd/0x210 [ 92.783393] ? ip6_route_info_create+0x687/0x1640 [ 92.783846] ? ip6_route_add+0x74/0x110 [ 92.784236] ? inet6_rtm_newroute+0x8a/0xd0 Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge branch 'aquantia-fixes'David S. Miller10-30/+99
Igor Russkikh says: ==================== Aquantia atlantic hot fixes 03-2018 This is a set of atlantic driver hot fixes for various areas: Some issues with hardware reset covered, Fixed napi_poll flood happening on some traffic conditions, Allow system to change MAC address on live device, Add pci shutdown handler. patch v2: - reverse christmas tree - remove driver private parameter, replacing it with define. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: driver version bumpIgor Russkikh1-1/+1
Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Implement pci shutdown callbackIgor Russkikh3-0/+36
We should close link and all NIC operations during shutdown. On some systems graceful reboot never closes NIC interface on its own, but only indicates pci device shutdown. Without explicit handler, NIC rx rings continued to transfer DMA data into prepared buffers while CPU rebooted already. That caused memory corruptions on soft reboot. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Allow live mac address changesIgor Russkikh1-0/+2
There is nothing prevents us from changing MAC on the running interface. Allow this with ndev priv flag. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh4-9/+13
We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Change inefficient wait loop on fw data readsIgor Russkikh2-15/+28
B1 hardware changes behavior of mailbox interface, it has busy bit always raised. Data ready condition should be detected by increment of address register. Old code has empty `for` loop, and that caused cpu overloads on B1 hardware. aq_nic_service_timer_cb consumed ~100ms because of that. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Fix a regression with reset on old firmwareIgor Russkikh1-0/+4
FW 1.5.58 and below needs a fixed delay even after 0x18 register is filled. Otherwise, setting MPI_INIT state too fast causes traffic hang. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: aquantia: Fix hardware reset when SPI may rarely hangupIgor Russkikh1-5/+15
Under some circumstances (notably using thunderbolt interface) SPI on chip reset may be in active transaction. Here we forcibly cleanup SPI to prevent possible hangups. Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge branch 's390-qeth-fixes'David S. Miller3-8/+17
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-03-20 Please apply one final set of qeth patches for 4.16. All of these fix long-standing bugs, so please queue them up for -stable as well. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22s390/qeth: on channel error, reject further cmd requestsJulian Wiedmann1-0/+1
When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22s390/qeth: lock read device while queueing next bufferJulian Wiedmann1-3/+13
For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22s390/qeth: when thread completes, wake up all waitersJulian Wiedmann1-1/+1
qeth_wait_for_threads() is potentially called by multiple users, make sure to notify all of them after qeth_clear_thread_running_bit() adjusted the thread_running_mask. With no timeout, callers would otherwise stall. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22s390/qeth: free netdevice when removing a cardJulian Wiedmann3-4/+2
On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge branch 'net-phy-Add-general-dummy-stubs-for-MMD-register-access'David S. Miller4-21/+25
Kevin Hao says: ==================== net: phy: Add general dummy stubs for MMD register access v2: As suggested by Andrew: - Add general dummy stubs - Also use that for the micrel phy This patch series fix the Ethernet broken on the mpc8315erdb board introduced by commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: phy: micrel: Use the general dummy stubs for MMD register accessKevin Hao1-21/+2
The new general dummy stubs for MMD register access were introduced. Use that for the codes reuse. Signed-off-by: Kevin Hao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211bKevin Hao1-0/+2
The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22net: phy: Add general dummy stubs for MMD register accessKevin Hao2-0/+21
For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge tag 'batadv-net-for-davem-20180319' of git://git.open-mesh.org/linux-mergeDavid S. Miller5-13/+20
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix possible IPv6 packet loss when multicast extension is used, by Linus Luessing - fix SKB handling issues for TTVN and DAT, by Matthias Schiffer (two patches) - fix include for eventpoll, by Sven Eckelmann - fix skb checksum for ttvn reroutes, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22posix-timers: Protect posix clock array access against speculationThomas Gleixner1-3/+8
The clockid argument of clockid_to_kclock() comes straight from user space via various syscalls and is used as index into the posix_clocks array. Protect it against spectre v1 array out of bounds speculation. Remove the redundant check for !posix_clock[id] as this is another source for speculation and does not provide any advantage over the return posix_clock[id] path which returns NULL in that case anyway. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Dan Williams <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: Greg KH <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: David Woodhouse <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-22ALSA: aloop: Fix access to not-yet-ready substream via cableTakashi Iwai1-1/+7
In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-03-22ALSA: aloop: Sync stale timer before releaseTakashi Iwai1-1/+8
The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-03-22ALSA: hda/realtek - Fix speaker no sound after system resumeKailang Yang1-0/+4
It will have a chance speaker no sound after system resume. To toggle NID 0x53 index 0x2 bit 15 will solve this issue. This usage will also suitable with ALC256. Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-03-22ALSA: hda/realtek - Fix Dell headset Mic can't recordKailang Yang1-0/+10
This platform was hardware fixed type for CTIA type for headset port. Assigned 0x19 verb will fix can't record issue. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-03-22drm: udl: Properly check framebuffer mmap offsetsGreg Kroah-Hartman1-2/+7
The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by: Eyal Itkin <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-22dmaengine: stm32-dmamux: fix a potential buffer overflowPierre-Yves MORDRET1-3/+6
The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2018-03-21Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"Alex Williamson1-3/+0
This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath <[email protected]> Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.