aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14IB/mlx5: Fix cleanup order on unloadMark Bloch2-10/+14
On load we create private CQ/QP/PD in order to be used by UMR, we create those resources after we register ourself as an IB device, and we destroy them after we unregister as an IB device. This was changed by commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") which moved the destruction before we unregistration. This allowed to trigger an invalid memory access when unloading mlx5_ib while there are open resources: BUG: unable to handle kernel paging request at 00000001002c012c ... Call Trace: mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib] __slab_free+0x9a/0x2d0 delay_time_func+0x10/0x10 [mlx5_ib] unreg_umr.isra.15+0x4b/0x50 [mlx5_ib] mlx5_mr_cache_free+0x46/0x150 [mlx5_ib] clean_mr+0xc9/0x190 [mlx5_ib] dereg_mr+0xba/0xf0 [mlx5_ib] ib_dereg_mr+0x13/0x20 [ib_core] remove_commit_idr_uobject+0x16/0x70 [ib_uverbs] uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs] ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs] ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs] ib_unregister_device+0xd4/0x190 [ib_core] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] mlx5_remove_device+0xf5/0x120 [mlx5_core] mlx5_unregister_interface+0x37/0x90 [mlx5_core] mlx5_ib_cleanup+0xc/0x225 [mlx5_ib] SyS_delete_module+0x153/0x230 do_syscall_64+0x62/0x110 entry_SYSCALL_64_after_hwframe+0x21/0x86 ... We restore the original behavior by breaking the UMR stage into two parts, pre and post IB registration stages, this way we can restore the original functionality and maintain clean separation of logic between stages. Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14drm/amdgpu/dce: Don't turn off DP sink when disconnectedMichel Dänzer1-19/+12
Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: save/restore backlight level in legacy dce codeAlex Deucher7-2/+40
Save/restore the backlight level scratch register in S3/S4 so the backlight level comes back at the previously requested level. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047 Fixes: 4ec6ecf48c64d (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling) Acked-by: Michel Dänzer <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/radeon: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> CC: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> CC: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-03-14RDMA/ucma: Don't allow join attempts for unsupported AF familyLeon Romanovsky1-1/+7
Users can provide garbage while calling to ucma_join_ip_multicast(), it will indirectly cause to rdma_addr_size() return 0, making the call to ucma_process_join(), which had the right checks, but it is better to check the input as early as possible. The following crash from syzkaller revealed it. kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286 RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000 RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12 RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998 R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00 FS: 0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:344 [inline] ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421 ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633 __vfs_write+0xef/0x970 fs/read_write.c:480 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline] do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f9ec99 RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100 RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de 55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0 Fixes: 5bc2b7b397b0 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Sean Hefty <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14RDMA/ucma: Fix access to non-initialized CM_ID objectLeon Romanovsky1-0/+3
The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <[email protected]> Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Sean Hefty <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14Merge tag 'platform-drivers-x86-v4.16-7' of ↵Linus Torvalds4-6/+7
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform drives fixes from Darren Hart: - DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it depends on DCDBAS, update the Kconfig accordingly. - fix the dell driver init order to ensure that the driver dependencies are met, avoiding race conditions resulting in boot failure on certain systems when the drivers are built-in. * tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Fix dell driver init order platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
2018-03-14RDMA/core: Do not use invalid destination in determining port reuseTatyana Nikolova1-5/+7
cma_port_is_unique() allows local port reuse if the quad (source address and port, destination address and port) for this connection is unique. However, if the destination info is zero or unspecified, it can't make a correct decision but still allows port reuse. For example, sometimes rdma_bind_addr() is called with unspecified destination and reusing the port can lead to creating a connection with a duplicate quad, after the destination is resolved. The issue manifests when MPI scale-up tests hang after the duplicate quad is used. Set the destination address family and add checks for zero destination address and port to prevent source port reuse based on invalid destination. Fixes: 19b752a19dce ("IB/cma: Allow port reuse for rdma_id") Reviewed-by: Sean Hefty <[email protected]> Signed-off-by: Tatyana Nikolova <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14dm mpath: fix passing integrity dataSteffen Maier1-2/+3
After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data") Cc: <[email protected]> #4.12+ Bisected-by: Fedor Loshakov <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2018-03-14RDMA/mlx5: Fix crash while accessing garbage pointer and freed memoryLeon Romanovsky1-4/+8
The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <[email protected]> Cc: <[email protected]> Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14x86/mm: Fix vmalloc_fault to use pXd_largeToshi Kani1-3/+3
Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS is not set since the function inadvertently uses pXn_huge(), which always return 0 in this case. ioremap() does not depend on CONFIG_HUGETLBFS. Fix vmalloc_fault() to call pXd_large() instead. Fixes: f4eafd8bcd52 ("x86/mm: Fix vmalloc_fault() to handle large pages properly") Reported-by: Gratian Crisan <[email protected]> Signed-off-by: Toshi Kani <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Borislav Petkov <[email protected]> Cc: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-14RDMAVT: Fix synchronization around percpu_refTejun Heo1-4/+6
rvt_mregion uses percpu_ref for reference counting and RCU to protect accesses from lkey_table. When a rvt_mregion needs to be freed, it first gets unregistered from lkey_table and then rvt_check_refs() is called to wait for in-flight usages before the rvt_mregion is freed. rvt_check_refs() seems to have a couple issues. * It has a fast exit path which tests percpu_ref_is_zero(). However, a percpu_ref reading zero doesn't mean that the object can be released. In fact, the ->release() callback might not even have started executing yet. Proceeding with freeing can lead to use-after-free. * lkey_table is RCU protected but there is no RCU grace period in the free path. percpu_ref uses RCU internally but it's sched-RCU whose grace periods are different from regular RCU. Also, it generally isn't a good idea to depend on internal behaviors like this. To address the above issues, this patch removes the fast exit and adds an explicit synchronize_rcu(). Signed-off-by: Tejun Heo <[email protected]> Acked-by: Dennis Dalessandro <[email protected]> Cc: Mike Marciniszyn <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]>
2018-03-14fs/aio: Use RCU accessors for kioctx_table->table[]Tejun Heo1-10/+11
While converting ioctx index from a list to a table, db446a08c23d ("aio: convert the ioctx list to table lookup v3") missed tagging kioctx_table->table[] as an array of RCU pointers and using the appropriate RCU accessors. This introduces a small window in the lookup path where init and access may race. Mark kioctx_table->table[] with __rcu and use the approriate RCU accessors when using the field. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Jann Horn <[email protected]> Fixes: db446a08c23d ("aio: convert the ioctx list to table lookup v3") Cc: Benjamin LaHaise <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: [email protected] # v3.12+
2018-03-14fs/aio: Add explicit RCU grace period when freeing kioctxTejun Heo1-4/+19
While fixing refcounting, e34ecee2ae79 ("aio: Fix a trinity splat") incorrectly removed explicit RCU grace period before freeing kioctx. The intention seems to be depending on the internal RCU grace periods of percpu_ref; however, percpu_ref uses a different flavor of RCU, sched-RCU. This can lead to kioctx being freed while RCU read protected dereferences are still in progress. Fix it by updating free_ioctx() to go through call_rcu() explicitly. v2: Comment added to explain double bouncing. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Jann Horn <[email protected]> Fixes: e34ecee2ae79 ("aio: Fix a trinity splat") Cc: Kent Overstreet <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: [email protected] # v3.13+
2018-03-14kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3Marc Zyngier1-1/+2
On guest exit, and when using GICv2 on GICv3, we use a dsb(st) to force synchronization between the memory-mapped guest view and the system-register view that the hypervisor uses. This is incorrect, as the spec calls out the need for "a DSB whose required access type is both loads and stores with any Shareability attribute", while we're only synchronizing stores. We also lack an isb after the dsb to ensure that the latter has actually been executed before we start reading stuff from the sysregs. The fix is pretty easy: turn dsb(st) into dsb(sy), and slap an isb() just after. Cc: [email protected] Fixes: f68d2b1b73cc ("arm64: KVM: Implement vgic-v3 save/restore") Acked-by: Christoffer Dall <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintidMarc Zyngier6-16/+67
The vgic code is trying to be clever when injecting GICv2 SGIs, and will happily populate LRs with the same interrupt number if they come from multiple vcpus (after all, they are distinct interrupt sources). Unfortunately, this is against the letter of the architecture, and the GICv2 architecture spec says "Each valid interrupt stored in the List registers must have a unique VirtualID for that virtual CPU interface.". GICv3 has similar (although slightly ambiguous) restrictions. This results in guests locking up when using GICv2-on-GICv3, for example. The obvious fix is to stop trying so hard, and inject a single vcpu per SGI per guest entry. After all, pending SGIs with multiple source vcpus are pretty rare, and are mostly seen in scenario where the physical CPUs are severely overcomitted. But as we now only inject a single instance of a multi-source SGI per vcpu entry, we may delay those interrupts for longer than strictly necessary, and run the risk of injecting lower priority interrupts in the meantime. In order to address this, we adopt a three stage strategy: - If we encounter a multi-source SGI in the AP list while computing its depth, we force the list to be sorted - When populating the LRs, we prevent the injection of any interrupt of lower priority than that of the first multi-source SGI we've injected. - Finally, the injection of a multi-source SGI triggers the request of a maintenance interrupt when there will be no pending interrupt in the LRs (HCR_NPIE). At the point where the last pending interrupt in the LRs switches from Pending to Active, the maintenance interrupt will be delivered, allowing us to add the remaining SGIs using the same process. Cc: [email protected] Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Acked-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14KVM: arm/arm64: Reduce verbosity of KVM init logArd Biesheuvel3-5/+5
On my GICv3 system, the following is printed to the kernel log at boot: kvm [1]: 8-bit VMID kvm [1]: IDMAP page: d20e35000 kvm [1]: HYP VA range: 800000000000:ffffffffffff kvm [1]: vgic-v2@2c020000 kvm [1]: GIC system register CPU interface enabled kvm [1]: vgic interrupt IRQ1 kvm [1]: virtual timer IRQ4 kvm [1]: Hyp mode initialized successfully The KVM IDMAP is a mapping of a statically allocated kernel structure, and so printing its physical address leaks the physical placement of the kernel when physical KASLR in effect. So change the kvm_info() to kvm_debug() to remove it from the log output. While at it, trim the output a bit more: IRQ numbers can be found in /proc/interrupts, and the HYP VA and vgic-v2 lines are not highly informational either. Cc: <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Christoffer Dall <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14KVM: arm/arm64: Reset mapped IRQs on VM resetChristoffer Dall3-0/+31
We currently don't allow resetting mapped IRQs from userspace, because their state is controlled by the hardware. But we do need to reset the state when the VM is reset, so we provide a function for the 'owner' of the mapped interrupt to reset the interrupt state. Currently only the timer uses mapped interrupts, so we call this function from the timer reset logic. Cc: [email protected] Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer") Signed-off-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUNChristoffer Dall2-12/+0
Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Cc: [email protected] Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl") Reviewed-by: Julien Grall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pendingAndre Przywara2-0/+4
Our irq_is_pending() helper function accesses multiple members of the vgic_irq struct, so we need to hold the lock when calling it. Add that requirement as a comment to the definition and take the lock around the call in vgic_mmio_read_pending(), where we were missing it before. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-03-14platform/x86: Fix dell driver init orderDarren Hart (VMware)3-3/+3
Update the initcall ordering to satisfy the following dependency ordering: 1. DCDBAS, ACPI_WMI 2. DELL_SMBIOS, DELL_RBTN 3. DELL_LAPTOP, DELL_WMI By assigning them to the following initcall levels: subsys_initcall: DCDBAS, ACPI_WMI module_init: DELL_SMBIOS, DELL_RBTN late_initcall: DELL_LAPTOP, DELL_WMI Cc: Dominik Brodowski <[email protected]> Cc: [email protected] Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-03-14platform/x86: dell-smbios: Resolve dependency error on ACPI_WMIDarren Hart1-3/+4
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled, DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to prevent a configuration where DELL_SMBIOS=y and either backend dependency =m. Update the comment accordingly. Cc: Mario Limonciello <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Dominik Brodowski <[email protected]> Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-03-14sunvnet: does not support GSO for sctpCathy Zhou1-1/+1
The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the sunvnet driver does not support GSO for sctp. Here we remove the NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO instead. Signed-off-by: Cathy Zhou <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'linux-can-fixes-for-4.16-20180314' of ↵David S. Miller2-40/+65
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-14 this is a pull request of two patches for net/master. Both patches are by Andri Yngvason and fix problems in the cc770 driver, that show up quite fast on RT systems, but also on non RT setups. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-14tg3: prevent scheduling while atomic splatJonathan Toppins1-1/+1
The problem was introduced in commit 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <[email protected]> Acked-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtuSabrina Dubroca5-10/+32
Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <[email protected]> Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge branch 'DPAA-Ethernet-fixes'David S. Miller2-27/+9
Madalin Bucur says: ==================== DPAA Ethernet fixes This patch set is addressing several issues in the DPAA Ethernet driver suite: - module unload crash caused by wrong reference to device being left in the cleanup code after the DSA related changes - scheduling wile atomic bug in QMan code revealed during dpaa_eth module unload - a couple of error counter fixes, a duplicated init in dpaa_eth. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: remove duplicate increment of the tx_errors counterCamelia Groza1-1/+0
The tx_errors counter is incremented by the dpaa_xmit caller. Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: increment the RX dropped counter when neededCamelia Groza1-1/+3
Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: remove duplicate initializationCamelia Groza1-1/+0
The fd_format has already been initialized at this point. Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: fix error in dpaa_remove()Madalin Bucur1-1/+1
The recent changes that make the driver probing compatible with DSA were not propagated in the dpa_remove() function, breaking the module unload function. Using the proper device to address the issue. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14soc/fsl/qbman: fix issue in qman_delete_cgr_safe()Madalin Bucur1-23/+5
The wait_for_completion() call in qman_delete_cgr_safe() was triggering a scheduling while atomic bug, replacing the kthread with a smp_call_function_single() call to fix it. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: Roy Pledge <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'usb-4.16-rc6' of ↵Linus Torvalds26-218/+211
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a small clump of USB fixes for 4.16-rc6. Nothing major, just a number of fixes in lots of different drivers, as well as a PHY driver fix that snuck into this tree. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: musb: Fix external abort in musb_remove on omap2430 phy: qcom-ufs: add MODULE_LICENSE tag usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM usbip: vudc: fix null pointer dereference on udc->lock xhci: Fix front USB ports on ASUS PRIME B350M-A usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" usb: usbmon: Read text within supplied buffer size usb: host: xhci-rcar: add support for r8a77965 USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h usb: xhci: dbc: Fix lockdep warning xhci: fix endpoint context tracer output Revert "typec: tcpm: Only request matching pdos" usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers usb: quirks: add control message delay for 1b1c:1b20 uas: fix comparison for error code usb: gadget: udc: renesas_usb3: add binging for r8a77965 usb: renesas_usbhs: add binding for r8a77965 usb: dwc2: fix STM32F7 USB OTG HS compatible dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding ...
2018-03-14Merge tag 'tty-4.16-rc6' of ↵Linus Torvalds9-5/+42
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty core and serial driver fixes for 4.16-rc6. They resolve some newly reported bugs, as well as some very old ones, which is always nice to see. There is also a new device id added in here for good measure. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: fix bogus dev_err serial: sh-sci: prevent lockup on full TTY buffers serial: 8250_pci: Add Brainboxes UC-260 4 port serial device earlycon: add reg-offset to physical address before mapping serial: core: mark port as initialized in autoconfig serial: 8250_pci: Don't fail on multiport card class tty/serial: atmel: add new version check for usart tty: make n_tty_read() always abort if hangup is in progress
2018-03-14Merge tag 'staging-4.16-rc6' of ↵Linus Torvalds2-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.16-rc6 Two of them are lockdep fixes for the ashmem driver that have been reported by a number of people recently. The last one is a fix for the comedi driver core. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: Fix possible deadlock in ashmem_ioctl staging: comedi: fix comedi_nsamples_left. staging: android: ashmem: Fix lockdep issue during llseek
2018-03-14net: use skb_to_full_sk() in skb_update_prio()Eric Dumazet2-9/+17
Andrei Vagin reported a KASAN: slab-out-of-bounds error in skb_update_prio() Since SYNACK might be attached to a request socket, we need to get back to the listener socket. Since this listener is manipulated without locks, add const qualifiers to sock_cgroup_prioidx() so that the const can also be used in skb_update_prio() Also add the const qualifier to sock_cgroup_classid() for consistency. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Andrei Vagin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linuxLinus Torvalds2-6/+6
Pull auxdisplay fixes from Miguel Ojeda: "Silence a few warnings in auxdisplay. - a couple of uninitialized warnings reported by the build service - a doc comment warning under W=1 - three fall-through comments not recognized under W=1" * tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux: auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings auxdisplay: panel: Change comments to silence fallthrough warnings
2018-03-14jump_label: Fix sparc64 warningJosh Poimboeuf1-1/+2
The kbuild test robot reported the following warning on sparc64: kernel/jump_label.c: In function '__jump_label_update': kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code); On sparc64, the jump_label entry->code field is of type u32, but pointers are 64-bit. Silence the warning by casting entry->code to an unsigned long before casting it to a pointer. This is also what the sparc jump label code does. Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Jason Baron <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "David S . Miller" <[email protected]> Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
2018-03-14libata: Enable queued TRIM for Samsung SSD 860Ju Hyung Park1-1/+3
Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by: Park Ju Hyung <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected]
2018-03-14x86/speculation, objtool: Annotate indirect calls/jumps for objtool on ↵Andy Whitcroft1-1/+4
32-bit kernels In the following commit: 9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by: Andy Whitcroft <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David Woodhouse <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14can: cc770: Fix queue stall & dropped RTR replyAndri Yngvason2-28/+68
While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by: Andri Yngvason <[email protected]> Tested-by: Richard Weinberger <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-14can: cc770: Fix stalls on rt-linux, remove redundant IRQ ackAndri Yngvason1-15/+0
This has been reported to cause stalls on rt-linux. Suggested-by: Richard Weinberger <[email protected]> Tested-by: Richard Weinberger <[email protected]> Signed-off-by: Andri Yngvason <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-14x86/vm86/32: Fix POPF emulationAndy Lutomirski1-1/+2
POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by: Stas Sergeev <[email protected]> Reported-by: Bart Oldeman <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14selftests/x86/entry_from_vm86: Add test cases for POPFAndy Lutomirski1-3/+27
POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by: Bart Oldeman <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stas Sergeev <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14selftests/x86/entry_from_vm86: Exit with 1 if we failAndy Lutomirski1-1/+1
Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stas Sergeev <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-13libnvdimm: remove redundant assignment to pointer 'dev'Colin Ian King1-1/+1
Pointer dev is being assigned a value that is never read, it is being re-assigned the same value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/nvdimm/pfn_devs.c:307:17: warning: Value stored to 'dev' during its initialization is never read Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Ross Zwisler <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-03-14KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entryPaul Mackerras1-5/+5
This fixes a bug where the trap number that is returned by __kvmppc_vcore_entry gets corrupted. The effect of the corruption is that IPIs get ignored on POWER9 systems when the IPI is sent via a doorbell interrupt to a CPU which is executing in a KVM guest. The effect of the IPI being ignored is often that another CPU locks up inside smp_call_function_many() (and if that CPU is holding a spinlock, other CPUs then lock up inside raw_spin_lock()). The trap number is currently held in register r12 for most of the assembly-language part of the guest exit path. In that path, we call kvmppc_subcore_exit_guest(), which is a C function, without restoring r12 afterwards. Depending on the kernel config and the compiler, it may modify r12 or it may not, so some config/compiler combinations see the bug and others don't. To fix this, we arrange for the trap number to be stored on the stack from the 'guest_bypass:' label until the end of the function, then the trap number is loaded and returned in r12 as before. Cc: [email protected] # v4.8+ Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt") Signed-off-by: Paul Mackerras <[email protected]>
2018-03-13workqueue: remove unused cancel_work()Stephen Hemminger2-9/+0
Found this by accident. There are no usages of bare cancel_work() in current kernel source. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2018-03-13IB/mlx5: Fix integer overflows in mlx5_ib_create_srqBoris Pismenny2-8/+11
This patch validates user provided input to prevent integer overflow due to integer manipulation in the mlx5_ib_create_srq function. Cc: syzkaller <[email protected]> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.