| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has
not been able to boot.
This commit caused mips_cm_probe() to be called before
mt7621.c::proc_soc_init().
prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out
the bootloader config" and means that configuration registers are no
longer available. It has some code to re-enable this config.
Before this re-enable code is run, the sysc register cannot be read, so
when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and
panic() is called.
If we move the config-repair code to the top of prom_soc_init(), the
registers can be read and boot can proceed.
Very occasionally, the first register read after the reconfiguration
returns garbage, so add a call to __sync().
Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Matt Redfearn <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.5+
Patchwork: https://patchwork.linux-mips.org/patch/18859/
Signed-off-by: James Hogan <[email protected]>
|
|
ralink_halt() does nothing that machine_halt() doesn't already do, so it
adds no value.
It actually causes incorrect behaviour due to the "unreachable()" at the
end. This tells the compiler that the end of the function will never be
reached, which isn't true. The compiler responds by not adding a
'return' instruction, so control simply moves on to whatever bytes come
afterwards in memory. In my tested, that was the ralink_restart()
function. This means that an attempt to 'halt' the machine would
actually cause a reboot.
So remove ralink_halt() so that a 'halt' really does halt.
Fixes: c06e836ada59 ("MIPS: ralink: adds reset code")
Signed-off-by: NeilBrown <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/18851/
Signed-off-by: James Hogan <[email protected]>
|
|
into drm-fixes
A few more fixes for 4.16. Mostly for displays:
- A fix for DP handling on radeon
- Fix banding on eDP panels
- Fix HBR audio
- Fix for disabling VGA mode on Raven that leads to a corrupt or
blank display on some platforms
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Add one to EDID's audio channel count when passing to DC
drm/amd/display: We shouldn't set format_default on plane as atomic driver
drm/amd/display: Fix FMT truncation programming
drm/amd/display: Allow truncation to 10 bits
drm/amd/display: fix dereferencing possible ERR_PTR()
drm/amd/display: Refine disable VGA
drm/amdgpu: Use atomic function to disable crtcs with dc enabled
drm/radeon: Don't turn off DP sink when disconnected
|
|
Davide Caratti says:
====================
fix idr leak in actions
This series fixes situations where a temporary failure to install a TC
action results in the permanent impossibility to reuse the configured
value of 'index'.
Thanks to Cong Wang for the initial review.
v2: fix build error in act_ipt.c, reported by kbuild test robot
====================
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tcf_skbmod_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure skbmod rules
using the same idr value will systematically fail with -ENOSPC, unless
the first attempt was done using the 'replace' keyword:
# tc action add action skbmod swap mac index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called
on the error path when the idr has been reserved, but not yet inserted.
Also, don't test 'ovr' in the error path, to avoid a 'replace' failure
implicitly become a 'delete' that leaks refcount in act_skbmod module:
# rmmod act_skbmod; modprobe act_skbmod
# tc action add action skbmod swap mac index 100
# tc action add action skbmod swap mac continue index 100
RTNETLINK answers: File exists
We have an error talking to the kernel
# tc action replace action skbmod swap mac continue index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action skbmod
#
# rmmod act_skbmod
rmmod: ERROR: Module act_skbmod is in use
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tcf_vlan_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure vlan rules using
the same idr value will systematically fail with -ENOSPC, unless the first
attempt was done using the 'replace' keyword.
# tc action add action vlan pop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in tcf_vlan_init(), ensuring that tcf_idr_release() is called on
the error path when the idr has been reserved, but not yet inserted. Also,
don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly
become a 'delete' that leaks refcount in act_vlan module:
# rmmod act_vlan; modprobe act_vlan
# tc action add action vlan push id 5 index 100
# tc action replace action vlan push id 7 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action vlan
#
# rmmod act_vlan
rmmod: ERROR: Module act_vlan is in use
Fixes: 4c5b9d9642c8 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
__tcf_ipt_init() can fail after the idr has been successfully reserved.
When this happens, subsequent attempts to configure xt/ipt rules using
the same idr value systematically fail with -ENOSPC:
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called
when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target()
to avoid NULL pointer dereference.
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tcf_pedit_init() can fail to allocate 'keys' after the idr has been
successfully reserved. When this happens, subsequent attempts to configure
a pedit rule using the same idr value systematically fail with -ENOSPC:
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of tcf_act_pedit_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The persistence domain is a point in the platform where once writes
reach that destination the platform claims it will make them persistent
relative to power loss. In the ACPI NFIT this is currently communicated
as 2 bits in the "NFIT - Platform Capabilities Structure". The bits
comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on
Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM
Durability on Power Loss Capable".
Commit 96c3a239054a "libnvdimm: expose platform persistence attr..."
shows the persistence domain as flags, but it's really an enumerated
hierarchy.
Fix this newly introduced user ABI to show the closest available
persistence domain before userspace develops dependencies on seeing, or
needing to develop code to tolerate, the raw NFIT flags communicated
through the libnvdimm-generic region attribute.
Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...")
Reviewed-by: Dave Jiang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
tcf_act_police_init() can fail after the idr has been successfully
reserved (e.g., qdisc_get_rtab() may return NULL). When this happens,
subsequent attempts to configure a police rule using the same idr value
systematiclly fail with -ENOSPC:
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
...
Fix this in the error path of tcf_act_police_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
if the kernel fails to duplicate 'sdata', creation of a new action fails
with -ENOMEM. However, subsequent attempts to install the same action
using the same value of 'index' systematically fail with -ENOSPC, and
that value of 'index' will no more be usable by act_simple, until rmmod /
insmod of act_simple.ko is done:
# tc actions add action simple sdata hello index 100
# tc actions list action simple
action order 0: Simple <hello>
index 100 ref 1 bind 0
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of tcf_simp_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Suggested-by: Cong Wang <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
when the following command sequence is entered
# tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
# tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
act_bpf correctly refuses to install the first TC rule, because 31 is not
a valid instruction. However, it refuses to install the second TC rule,
even if the BPF code is correct. Furthermore, it's no more possible to
install any other rule having the same value of 'index' until act_bpf
module is unloaded/inserted again. After the idr has been reserved, call
tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue.
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Trivial fix to spelling mistakes in DP_ERR error message text and
comments
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Trivial fix to spelling mistake in BNX2X_ERR error message text
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Sudarsana Kalluru <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Enable syscon to use it for the RCU MFD on Amazon SE as well.
The Amazon SE also has similar reset controller system as Danube and
XWAY and use their drivers mostly. As these drivers now need syscon also
activate the syscon subsystem for for Amazon SE.
Fixes: 2b6639d4c794 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD")
Signed-off-by: Mathias Kresin <[email protected]>
Signed-off-by: Hauke Mehrtens <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: John Crispin <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18817/
Signed-off-by: James Hogan <[email protected]>
|
|
On Danube and AR9 the USB core is connected though a AHB bus to the main
system cross bar, hence we need to enable the gating clock of the AHB
Bus as well to make the USB controller work.
Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <[email protected]>
Signed-off-by: Hauke Mehrtens <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: John Crispin <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18814/
Signed-off-by: James Hogan <[email protected]>
|
|
On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY
register is at 1f203018 similar to all other lantiq SoCs. Activate the
USB controller gating clock thorough the USB controller driver and not
the PHY.
This fixes a problem introduced in a previous commit.
Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <[email protected]>
Signed-off-by: Hauke Mehrtens <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: John Crispin <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18816/
Signed-off-by: James Hogan <[email protected]>
|
|
Similar to other region attributes, do not emit the persistence_domain
attribute if its contents are empty.
Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...")
Cc: Dave Jiang <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-03-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Follow-up fix to the fault injection framework to prevent jump
optimization on the kprobe by installing a dummy post-handler,
from Masami.
2) Drop bpf_perf_prog_read_value helper from tracepoint type programs
which was mistakenly added there and would otherwise crash due to
wrong input context, from Yonghong.
3) Fix a crash in BPF fs when compiled with clang. Code appears to
be fine just that clang tries to overly aggressive optimize in
non C conform ways, therefore fix the kernel's Makefile to
generally prevent such issues, from Daniel.
4) Skip unnecessary capability checks in bpf syscall, which is otherwise
triggering unnecessary security hooks on capability checking and
causing false alarms on unprivileged processes trying to access
CAP_SYS_ADMIN restricted infra, from Chenbo.
5) Fix the test_bpf.ko module when CONFIG_BPF_JIT_ALWAYS_ON is set
with regards to a test case that is really just supposed to fail
on x8_64 JIT but not others, from Thadeu.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".
Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Michel Thierry <[email protected]>
Reviewed-by: Michel Thierry <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
When switching mac80211 to use QoS NDP, it turned out that
ath9k_htc is somehow broken by this, e.g. see
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060.
Fix this by using the new mac80211 flag to go back to the
old, incorrect, behaviour for this driver.
Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
Reported-by: Ben Caradoc-Davies <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Set the wmediumd to the net's wmediumd when the radio gets created.
Radios created after HWSIM_CMD_REGISTER don't currently get their
data->wmediumd set and the userspace would need to reconnect to
netlink to be able to call HWSIM_CMD_REGISTER again.
Alternatively I think data->netgroup and data->wmedium could be
replaced with a pointer to hwsim_net.
Signed-off-by: Andrew Zaborowski <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Zero is a valid IRQ number and is being used on some CHT tablets. Stop
treating it as an error.
Reported-by: Luke Ross <[email protected]>
Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Cc: Arvind Yadav <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060
Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.
Signed-off-by: Ben Caradoc-Davies <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
When validating legacy surfaces, the backup bo might be destroyed at
surface validate time. However, the kms resource validation code may have
the bo reserved, so we will destroy a locked mutex. While there shouldn't
be any other users of that mutex when it is destroyed, it causes a lock
leak and thus throws a lockdep error.
Fix this by having the kms resource validation code hold a reference to
the bo while we have it reserved. We do this by introducing a validation
context which might come in handy when the kms code is extended to validate
multiple resources or buffers.
Cc: <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Brian Paul <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
|
|
When we are running without fbdev, transitioning from the login screen to
X or gnome-shell/wayland will cause a vt switch and the driver will disable
svga mode, losing all modesetting resources. However, the kms atomic state
does not reflect that and may think that a crtc is still turned on, which
will cause device errors when we try to bind an fb to the crtc, and the
screen will remain black.
Fix this by turning off all kms resources before disabling svga mode.
Cc: <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
|
|
getfb can only return a single plane, so reject attempts to use it with
multi-plane framebuffers.
Signed-off-by: Daniel Stone <[email protected]>
Reported-by: Daniel van Vugt <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Fixes: 308e5bcbdb10 ("drm: add an fb creation ioctl that takes a pixel format v5")
Cc: [email protected] # v3.3+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105518
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We've observed too long probe time with Coffee Lake (CFL) machines,
and the likely cause is some communication problem between the
HD-audio controller and the codec chips. While the controller expects
an IRQ wakeup for each codec response, it seems sometimes missing, and
it takes one second for the controller driver to time out and read the
response in the polling mode.
Although we aren't sure about the real culprit yet, in this patch, we
put a workaround by forcing the polling mode as default for CFL
machines; the polling mode itself isn't too heavy, and much better
than other workarounds initially suggested (e.g. disabling
power-save), at least.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007
Fixes: e79b0006c45c ("ALSA: hda - Add Coffelake PCI ID")
Reported-and-tested-by: Hui Wang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Due to missing information in Hardware manual, current
implementation doesn't read ECCSTAT0 and ECCSTAT1 registers
for IFC 2.0.
Add support to read ECCSTAT0 and ECCSTAT1 registers during
ecccheck for IFC 2.0.
Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0")
Cc: [email protected] # v3.18+
Signed-off-by: Jagdish Gediya <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC
version 2.0.0 due to increase in SRAM size. This is causing eccstat
array to over flow.
So, replace eccstat array with u32 variable to make it fail-safe and
independent of number of ECC status registers or SRAM size.
Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0")
Cc: [email protected] # 3.18+
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Jagdish Gediya <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
As per the IFC hardware manual, Most significant 2 bytes in
nand_fsr register are the outcome of NAND READ STATUS command.
So status value need to be shifted and aligned as per the nand
framework requirement.
Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
Cc: [email protected] # v3.18+
Signed-off-by: Jagdish Gediya <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
DC takes channel count to mean the actual count. cea_sad's channels
represent it as number of channels - 1.
Signed-off-by: Harry Wentland <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
This is still a leftover from early atomic brinup days.
Signed-off-by: Harry Wentland <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Switch the order of parameters being set for depth
and mode of truncation, as it previously was not correct
Signed-off-by: Mikita Lipski <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The truncation isn't being programmed if the truncation
depth is set to 2, it causes an issue with dce11.2 asic
using 6bit eDP panel. It required to truncate 12:10 in order to
perform spatial dither 10:6.
This change will allow 12:10 truncation to be enabled.
Signed-off-by: Mikita Lipski <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Add a device tree property description for hdmi device node
. '#sound-dai-cells' property is required to describe link between
the HDMI IP block and the SoC's audio subsystem and Exynos SoC device
tree files already have this property but we missed its description.
* tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.16-rc7
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
* tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Shutdown on driver unbind
drm/tegra: dsi: Don't disable regulator on ->exit()
drm/tegra: dc: Detach IOMMU group from domain only once
drm/tegra: plane: Correct legacy blending
drm/tegra: plane: Fix RGB565 format on older Tegra
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A late collection of fixes for regressions seen this release cycle.
Normally I send this earlier than now but real life got in the way.
Things are back to normal now.
There's the normal set of SoC driver fixes: i.MX boot warning, TI
display clks, allwinner clk ops being wrong (fun), driver probe
badness on error paths, correctness fix for the new aspeed driver, and
even a fix for a race condition in the bcm2835 clk driver.
At the core framework level we also got some fixes for the clk phase
API caching at the wrong time, better handling of the enabled state of
orphan clks, and a fix for a newly introduced bug in how we handle
rate calculations for pass-through clks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm2835: Protect sections updating shared registers
clk: bcm2835: Fix ana->maskX definitions
clk: aspeed: Prevent reset if clock is enabled
clk: aspeed: Fix is_enabled for certain clocks
clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()
clk: hisilicon: hi3660：Fix potential NULL dereference in hi3660_stub_clk_probe()
clk: fix determine rate error with pass-through clock
clk: migrate the count of orphaned clocks at init
clk: update cached phase to respect the fact when setting phase
clk: ti: am43xx: add set-rate-parent support for display clkctrl clock
clk: ti: am33xx: add set-rate-parent support for display clkctrl clock
clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
|
|
Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):
[ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
[ 4134.820925] Mem abort info:
[ 4134.901283] Exception class = DABT (current EL), IL = 32 bits
[ 4135.016736] SET = 0, FnV = 0
[ 4135.119820] EA = 0, S1PTW = 0
[ 4135.201431] Data abort info:
[ 4135.301388] ISV = 0, ISS = 0x00000021
[ 4135.359599] CM = 0, WnR = 0
[ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
[ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
[ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 4135.674610] Modules linked in:
[ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1
[ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
[ 4135.731599] PC is at bpf_prog_add+0x20/0x68
[ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
[ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
[ 4135.769062] sp : ffffff801d4e3ce0
[...]
[ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
[ 4136.273746] Call trace:
[...]
[ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
[ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
[ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
[ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
[ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
[ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88
Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.
Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:
Pointers with different bases cannot represent the same object.
(Note that clang defaults to -fmerge-all-constants, which can
lead to inconsistent results for comparisons involving the address
of a constant; this generally doesn't matter in practice.)
The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:
Languages like C or C++ require each variable, including multiple
instances of the same variable in recursive calls, to have distinct
locations, so using this option results in non-conforming behavior.
There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.
Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).
$ gcc -fverbose-asm -O2 foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
-> foo.S doesn't list -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.
[1] https://bugs.llvm.org/show_bug.cgi?id=18538
Reported-by: Prasad Sodagudi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Chenbo Feng <[email protected]>
Cc: Richard Smith <[email protected]>
Cc: Chandler Carruth <[email protected]>
Cc: [email protected]
Tested-by: Prasad Sodagudi <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.
This is going to be on ongoing theme for some time, I think. Both
Google and Mellanox are now running syzkaller on different parts of
the user API.
Summary:
- Many bug fixes related to syzkaller from Leon Romanovsky. These are
still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during
scale-up testing
- Bug fixes for the profile and restrack patches accepted during this
merge window
- Compile warning cleanups from Arnd, this is apparently the last
warning to make 32 bit builds quiet"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/verbs: Remove restrack entry from XRCD structure
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
infiniband: qplib_fp: fix pointer cast
IB/mlx5: Fix cleanup order on unload
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Fix access to non-initialized CM_ID object
RDMA/core: Do not use invalid destination in determining port reuse
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- one driver patch (qla2xxx) which fixes a problem caused by an
existing regression fix (FCP discovery is failing)
- one generic fix to a longstanding bug in libsas that causes I/O
eventually to hang to the device in the face of ATA error recovery.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
scsi: libsas: defer ata device eh commands to libata
|
|
Pull nfsd fix from Bruce Fields:
"Just one fix for an occasional panic from Jeff Layton"
* tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux:
nfsd: remove blocked locks on client teardown
|
|
The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.
Signed-off-by: Chenbo Feng <[email protected]>
Acked-by: Lorenzo Colitti <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Commit 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.
This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.
Fixes: 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Function bpf_fill_maxinsns11 is designed to not be able to be JITed on
x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and
commit 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when
CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that
case.
However, it does not fail on other architectures, which have a different
JIT compiler design. So, test_bpf has started to fail to load on those.
After this fix, test_bpf loads fine on both x86_64 and ppc64el.
Fixes: 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y")
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Reviewed-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.
But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.
The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.
That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule. do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.
But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.
So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".
Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change. The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.
Reported-by: Andy Lutomirski <[email protected]>
Tested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.
Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.
[ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 109.090315] IP: ucma_connect+0x138/0x1d0
[ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0
[ 109.095384] Oops: 0000 [#1] SMP KASAN PTI
[ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45
[ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246
[ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2
[ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297
[ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb
[ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000
[ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118
[ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0
[ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 109.142057] Call Trace:
[ 109.144160] ? ucma_listen+0x110/0x110
[ 109.146386] ? wake_up_q+0x59/0x90
[ 109.148853] ? futex_wake+0x10b/0x2a0
[ 109.151297] ? save_stack+0x89/0xb0
[ 109.153489] ? _copy_from_user+0x5e/0x90
[ 109.155500] ucma_write+0x174/0x1f0
[ 109.157933] ? ucma_resolve_route+0xf0/0xf0
[ 109.160389] ? __mod_node_page_state+0x1d/0x80
[ 109.162706] __vfs_write+0xc4/0x350
[ 109.164911] ? kernel_read+0xa0/0xa0
[ 109.167121] ? path_openat+0x1b10/0x1b10
[ 109.169355] ? fsnotify+0x899/0x8f0
[ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170
[ 109.174145] ? __fget+0xa8/0xf0
[ 109.177110] vfs_write+0xf7/0x280
[ 109.179532] SyS_write+0xa1/0x120
[ 109.181885] ? SyS_read+0x120/0x120
[ 109.184482] ? compat_start_thread+0x60/0x60
[ 109.187124] ? SyS_read+0x120/0x120
[ 109.189548] do_syscall_64+0xeb/0x250
[ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 109.194725] RIP: 0033:0x7fabb61ebe99
[ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99
[ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004
[ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000
[ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0
[ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0
[ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80
[ 109.226256] CR2: 0000000000000020
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Fixes: 2f987a76a977 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: Stefano Brivio <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-03-19
this is a pull reqeust of one patch for net/master.
The patch is by Andri Yngvason and fixes a potential use-after-free bug
in the cc770 driver introduced in the previous pull-request.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
cppcheck report:
[drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab
Signed-off-by: Igor Pylypiv <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|