aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21drm/amd/display: correct num_dsc based on HW capCharlene Liu1-1/+1
[why] num_dsc is 3 for dcn314 based on HW capablity. Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314Nicholas Kazlauskas1-2/+1
[Why] This shouldn't trigger during tiled display hotplug/unplug but it does because one of the tiles can end up with a NULL plane state. This also doesn't guard against the hang that it was originally trying to resolve, and can instead cause DIO corruption due to OTG sync being lost. [How] This was reverted at one point out of DCN31 so revert it here too. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINEDaniel Miess2-223/+6
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: increase dcn315 pstate change latencyDmytro Laktyushkin1-8/+14
[Why & How] Update after new measurment came in Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix DP MST timeslot issue when fallback happenedCruise Hung1-1/+7
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Cruise Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram6-20/+45
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Update dummy P-state search to use DCN32 DMLGeorge Shen2-1/+51
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: skip audio setup when audio stream is enabledzhikzhai1-2/+4
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: zhikzhai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: update gamut remap if plane has changedHugo Hu1-0/+1
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Hugo Hu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Assume an LTTPR is always present on fixed_vs linksMichael Strauss1-0/+8
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by: George Shen <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: fix dcn315 memory channel count and width readDmytro Laktyushkin2-3/+7
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix double cursor on non-video RGB MPOLeo Li1-2/+10
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by: Bhawanpreet Lakha <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Leo Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Only consider pixle rate div policy for DCN32+Alvin Lee3-17/+2
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Port DCN30 420 logic to DCN32Chris Park3-0/+29
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <[email protected]> Signed-off-by: Chris Park <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amdgpu: Update PTE flags with TF enabledMukul Joshi2-4/+6
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21s390/vfio-ap: bypass unnecessary processing of AP resourcesTony Krowiak1-0/+30
It is not necessary to go through the process of validation, linking of queues to mdev and vice versa and filtering the APQNs assigned to the matrix mdev to build an AP configuration for a guest if an adapter or domain being assigned is already assigned to the matrix mdev. Likewise, it is not necessary to proceed through the process the unassignment of an adapter, domain or control domain if it is not assigned to the matrix mdev. Since it is not necessary to process assignment of a resource already assigned or process unassignment of a resource that is been assigned, this patch will bypass all assignment/unassignment operations for an adapter, domain or control domain under these circumstances. Not only is assignment of a duplicate adapter or domain unnecessary, it will also cause a hang situation when removing the matrix mdev to which it is assigned. The reason is because the same vfio_ap_queue objects with an APQN containing the APID of the adapter or APQI of the domain being assigned will get added multiple times to the hashtable that holds them. This results in the pprev and next pointers of the hlist_node (mdev_qnode field in the vfio_ap_queue object) pointing to the queue object itself resulting in an interminable loop when the mdev is removed and the queue table is iterated to reset the queues. Cc: [email protected] Fixes: 11cb2419fafe ("s390/vfio-ap: manage link between queue struct and matrix mdev") Reported-by: Matthew Rosato <[email protected]> Signed-off-by: Tony Krowiak <[email protected]> Reviewed-by: Halil Pasic <[email protected]> Signed-off-by: Halil Pasic <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-09-21i2c: mux: harden i2c_mux_alloc() against integer overflowsDan Carpenter1-2/+3
A couple years back we went through the kernel an automatically converted size calculations to use struct_size() instead. The struct_size() calculation is protected against integer overflows. However it does not make sense to use the result from struct_size() for additional math operations as that would negate any safeness. Fixes: 1f3b69b6b939 ("i2c: mux: Use struct_size() in devm_kzalloc()") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Peter Rosin <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-21i2c: mlxbf: Fix frequency calculationAsmaa Mnebhi1-40/+23
The i2c-mlxbf.c driver is currently broken because there is a bug in the calculation of the frequency. core_f, core_r and core_od are components read from hardware registers and are used to compute the frequency used to compute different timing parameters. The shifting mechanism used to get core_f, core_r and core_od is wrong. Use FIELD_GET to mask and shift the bitfields properly. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <[email protected]> Signed-off-by: Asmaa Mnebhi <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-21perf tools: Honor namespace when synthesizing build-idsNamhyung Kim1-3/+14
It needs to enter the namespace before reading a file. Fixes: 4183a8d70a288627 ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-2/+3
To pick the changes from: 7df548840c496b01 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Pawan Gupta <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf kcore_copy: Do not check /proc/modules is unchangedAdrian Hunter1-5/+2
/proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao <[email protected]> Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Daniel Dao <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21libperf evlist: Fix polling of system-wide eventsAdrian Hunter1-2/+3
Originally, (refer commit f90d194a867a5a1d ("perf evlist: Do not poll events that use the system_wide flag") there wasn't much reason to poll system-wide events because: 1. The mmaps get "merged" via set-output anyway (the per-cpu case) 2. perf reads all mmaps when any event is woken 3. system-wide mmaps do not fill up as fast as the mmaps for user selected events But there was 1 reason not to poll which was that it prevented correct termination due to POLLHUP on all user selected events. That issue is now easily resolved by using fdarray_flag__nonfilterable. With the advent of commit ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used also in the per-thread case where reason 1 does not apply. Fix the omission of system-wide events from polling by using the fdarray_flag__nonfilterable flag. Example: Before: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5 thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6 thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4 After: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5 thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6 thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7 thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9 thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10 thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11 thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12 thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13 thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14 thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15 thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4 Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf record: Fix cpu mask bit setting for mixed mmapsAdrian Hunter1-0/+2
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value -1 must be skipped when setting CPU mask bits. Prior to commit cbd7bfc7fd99acdd ("tools/perf: Fix out of bound access to cpu mask array") the invalid setting went unnoticed, but since then it causes perf record to fail with an error. Example: Before: $ perf record -e intel_pt// --per-thread uname Failed to initialize parallel data streaming masks After: $ perf record -e intel_pt// --per-thread uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.068 MB perf.data ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf test: Skip wp modify test on old kernelsNamhyung Kim1-2/+8
It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl. The kernel would return ENOTTY if it's not supported. Update the skip reason in that case. Committer notes: On s/390 the args aren't used, so need to be marked __maybe_unused. Reviewed-by: Ravi Bangoria <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21Merge tag 'opp-fixes-6.0' of ↵Rafael J. Wysocki3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP fixes for 6.0 from Viresh Kumar: "- Fix un-initialized variable usage (Christophe JAILLET). - Add missing DT properties (Rob Herring)." * tag 'opp-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes OPP: Fix an un-initialized variable usage
2022-09-21Merge tag 'for-linus-6.0-rc7' of ↵Linus Torvalds6-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Various fixes for build warnings - Fix default kernel command line * tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: arch: um: Mark the stack non-executable to fix a binutils warning um: Prevent KASAN splats in dump_stack() um: fix default console kernel parameter um: Cleanup compiler warning in arch/x86/um/tls_32.c um: Cleanup syscall_handler_t cast in syscalls_32.h
2022-09-21Merge tag 'mips-fixes_6.0_2' of ↵Linus Torvalds2-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix missing export for Lantiq watchdog driver - fix ethernet phy interface setup for Loongson32 * tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson32: Fix PHY-mode being left unspecified MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
2022-09-21Merge tag 'dmaengine-fix-6.0' of ↵Linus Torvalds3-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of small driver fixes: - xilinx_dma: devm_platform_ioremap_resource error handling, dma_set_mask_and_coherent failure handling, dt property read cleanup - refcount leak fix for of_xudma_dev_get() - zynqmp_dma: coverity fix for enum typecast" * tag 'dmaengine-fix-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warning dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling
2022-09-21Merge tag 'iommu-fixes-v6.0-rc6' of ↵Linus Torvalds3-13/+27
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for Intel VT-d: - Check the right capability bit for 5-level page table support. - Revert a previous fix which caused a regression with Thunderbolt devices" * tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Check correct capability for sagaw determination Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"
2022-09-21Merge tag 'sound-6.0-rc7' of ↵Linus Torvalds8-37/+80
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bit more changes than wished, but still manageable amount. Most of commits are HD-audio specific device fixes / quirks, while there is a revert for the previous fix due to regressions and a double-free fix in ALSA core code" * tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare" ALSA: core: Fix double-free at snd_card_new() ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED ALSA: hda/hdmi: Fix the converter reuse for the silent stream ALSA: hda/realtek: Add quirk for ASUS GA503R laptop ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack ALSA: hda/realtek: Re-arrange quirk table entries ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop ALSA: hda: Fix Nvidia dp infoframe ALSA: hda/realtek: Add quirk for Huawei WRT-WX9 ALSA: hda/tegra: set depop delay for tegra ALSA: hda: add Intel 5 Series / 3400 PCI DID ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation
2022-09-21Merge tag 'exfat-for-6.0-rc7' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fix from Namjae Jeon: - fix integer overflow on large partitions * tag 'exfat-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix overflow for large capacity partition
2022-09-21KVM: s390: pci: register pci hooks without interpretationMatthew Rosato2-5/+13
The kvm registration hooks must be registered even if the facilities necessary for zPCI interpretation are unavailable, as vfio-pci-zdev will expect to use the hooks regardless. This fixes an issue where vfio-pci-zdev will fail its open function because of a missing kvm_register when running on hardware that does not support zPCI interpretation. Fixes: ca922fecda6c ("KVM: s390: pci: Hook to access KVM lowlevel from VFIO") Signed-off-by: Matthew Rosato <[email protected]> Reviewed-by: Pierre Morel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Message-Id: <[email protected]> Signed-off-by: Janosch Frank <[email protected]>
2022-09-21KVM: s390: pci: fix GAIT physical vs virtual pointers usageMatthew Rosato2-2/+2
The GAIT and all of its entries must be represented by physical addresses as this structure is shared with underlying firmware. We can keep a virtual address of the GAIT origin in order to handle processing in the kernel, but when traversing the entries we must again convert the physical AISB stored in that GAIT entry into a virtual address in order to process it. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reviewed-by: Pierre Morel <[email protected]> Acked-by: Nico Boehr <[email protected]> Signed-off-by: Matthew Rosato <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Message-Id: <[email protected]> Signed-off-by: Janosch Frank <[email protected]>
2022-09-21KVM: s390: Pass initialized arg even if unusedJanis Schoetterl-Glausch1-3/+13
This silences smatch warnings reported by kbuild bot: arch/s390/kvm/gaccess.c:859 guest_range_to_gpas() error: uninitialized symbol 'prot'. arch/s390/kvm/gaccess.c:1064 access_guest_with_key() error: uninitialized symbol 'prot'. This is because it cannot tell that the value is not used in this case. The trans_exc* only examine prot if code is PGM_PROTECTION. Pass a dummy value for other codes. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Janis Schoetterl-Glausch <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Janosch Frank <[email protected]>
2022-09-21KVM: s390: pci: fix plain integer as NULL pointer warningsMatthew Rosato2-5/+5
Fix some sparse warnings that a plain integer 0 is being used instead of NULL. Reported-by: kernel test robot <[email protected]> Signed-off-by: Matthew Rosato <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Janosch Frank <[email protected]>
2022-09-21Merge tag 'linux-can-fixes-for-6.0-20220921' of ↵Jakub Kicinski2-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-09-21 The 1st patch is by me, targets the flexcan driver and fixes a potential system hang on single core systems under high CAN packet rate. The next 2 patches are also by me and target the gs_usb driver. A potential race condition during the ndo_open callback as well as the return value if the ethtool identify feature is not supported are fixed. * tag 'linux-can-fixes-for-6.0-20220921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21perf jit: Include program header in ELF filesLieven Hey2-0/+18
The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Lieven Hey <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Leo Yan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf test: Add a new test for perf stat cgroup BPF counterNamhyung Kim1-0/+83
$ sudo ./perf test -v each-cgroup 96: perf stat --bpf-counters --for-each-cgroup test : --- start --- test child forked, pid 79600 test child finished with 0 ---- end ---- perf stat --bpf-counters --for-each-cgroup test: Ok Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup countersNamhyung Kim1-3/+3
If it mixes core and uncore events, each evsel would have different cpu map. But it assumed they are same with evlist's all_cpus and accessed by the same index. This resulted in a crash like below. $ perf stat -a --bpf-counters --for-each_cgroup ^. -e cycles,imc/cas_count_read/ sleep 1 Segmentation fault While it's not recommended to use uncore events for cgroup aggregation, it should not crash. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Fix cpu map index in bperf cgroup codeNamhyung Kim1-2/+2
The previous cpu map introduced a bug in the bperf cgroup counter. This results in a failure when user gives a partial cpu map starting from non-zero. $ sudo ./perf stat -C 1-2 --bpf-counters --for-each-cgroup ^. sleep 1 libbpf: prog 'on_cgrp_switch': failed to create BPF link for perf_event FD 0: -9 (Bad file descriptor) Failed to attach cgroup program To get the FD of an evsel, it should use a map index not the CPU number. Fixes: 0255571a16059c8e ("perf cpumap: Switch to using perf_cpu_map API") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Fix BPF program section nameNamhyung Kim1-1/+1
It seems the recent libbpf got more strict about the section name. I'm seeing a failure like this: $ sudo ./perf stat -a --bpf-counters --for-each-cgroup ^. sleep 1 libbpf: prog 'on_cgrp_switch': missing BPF prog type, check ELF section name 'perf_events' libbpf: prog 'on_cgrp_switch': failed to load: -22 libbpf: failed to load object 'bperf_cgroup_bpf' libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -22 Failed to load cgroup skeleton The section name should be 'perf_event' (without the trailing 's'). Although it's related to the libbpf change, it'd be better fix the section name in the first place. Fixes: 944138f048f7d759 ("perf stat: Enable BPF counter with --for-each-cgroup") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21Merge tag 'fpga-for-6.0-final' of ↵Greg Kroah-Hartman1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus Xu writes: FPGA Manager changes for 6.0-final Intel m10 bmc secure update - Russ's change fixes the memory leak for a sysfs node reading All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-6.0 branch). Signed-off-by: Xu Yilun <[email protected]> * tag 'fpga-for-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: m10bmc-sec: Fix possible memory leak of flash_buf
2022-09-21mmc: core: Terminate infinite loop in SD-UHS voltage switchBrian Norris1-1/+2
This loop intends to retry a max of 10 times, with some implicit termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the termination condition depends on the value reported by the SD card (*rocr), which may or may not correctly reflect what we asked it to do. Needless to say, it's not wise to rely on the card doing what we expect; we should at least terminate the loop regardless. So, check both the input and output values, so we ensure we will terminate regardless of the SD card behavior. Note that SDIO learned a similar retry loop in commit 0797e5f1453b ("mmc: core: Fixup signal voltage switch"), but that used the 'ocr' result, and so the current pre-terminating condition looks like: rocr & ocr & R4_18V_PRESENT (i.e., it doesn't have the same bug.) This addresses a number of crash reports seen on ChromeOS that look like the following: ... // lots of repeated: ... <4>[13142.846061] mmc1: Skipping voltage switch <4>[13143.406087] mmc1: Skipping voltage switch <4>[13143.964724] mmc1: Skipping voltage switch <4>[13144.526089] mmc1: Skipping voltage switch <4>[13145.086088] mmc1: Skipping voltage switch <4>[13145.645941] mmc1: Skipping voltage switch <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds. ... Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Cc: <[email protected]> Signed-off-by: Brian Norris <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2022-09-21net: atlantic: fix potential memory leak in aq_ndev_close()Jianglei Nie1-3/+0
If aq_nic_stop() fails, aq_ndev_close() returns err without calling aq_nic_deinit() to release the relevant memory and resource, which will lead to a memory leak. We can fix it by deleting the if condition judgment and goto statement to call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak. Signed-off-by: Jianglei Nie <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-21iommu/vt-d: Check correct capability for sagaw determinationYi Liu1-1/+1
Check 5-level paging capability for 57 bits address width instead of checking 1GB large page capability. Fixes: 53fc7ad6edf2 ("iommu/vt-d: Correctly calculate sagaw value of IOMMU") Cc: [email protected] Reported-by: Raghunathan Srinivasan <[email protected]> Signed-off-by: Yi Liu <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Raghunathan Srinivasan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2022-09-21Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"Lu Baolu3-12/+26
This reverts commit 9cd4f1434479f1ac25c440c421fbf52069079914. Some issues were reported on the original commit. Some thunderbolt devices don't work anymore due to the following DMA fault. DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [09:00.0] fault index 0x8080 [fault reason 0x25] Blocked a compatibility format interrupt request Bring it back for now to avoid functional regression. Fixes: 9cd4f1434479f ("iommu/vt-d: Fix possible recursive locking in intel_iommu_init()") Link: https://lore.kernel.org/linux-iommu/[email protected]/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=216497 Cc: Mika Westerberg <[email protected]> Cc: <[email protected]> # 5.19.x Reported-and-tested-by: George Hilliard <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller4-16/+11
Florian Westphal says: ==================== netfilter: bugfixes for net The following set contains netfilter fixes for the *net* tree. Regressions (rc only): recent ebtables crash fix was incomplete, it added a memory leak. The patch to fix possible buffer overrun for BIG TCP in ftp conntrack tried to be too clever, we cannot re-use ct->lock: NAT engine might grab it again -> deadlock. Revert back to a global spinlock. Both from myself. Remove the documentation for the recently removed 'nf_conntrack_helper' sysctl as well, from Pablo Neira. The static_branch_inc() that guards the 'chain stats enabled' path needs to be deferred further, until the entire transaction was created. From Tetsuo Handa. Older bugs: Since 5.3: nf_tables_addchain may leak pcpu memory in error path when offloading fails. Also from Tetsuo Handa. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-09-21can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not ↵Marc Kleine-Budde1-6/+11
supported Until commit 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities") the ethtool_ops was only assigned for devices which support the GS_CAN_FEATURE_IDENTIFY feature. That commit assigns ethtool_ops unconditionally. This results on controllers without GS_CAN_FEATURE_IDENTIFY support for the following ethtool error: | $ ethtool -p can0 1 | Cannot identify NIC: Broken pipe Restore the correct error value by checking for GS_CAN_FEATURE_IDENTIFY in the gs_usb_set_phys_id() function. | $ ethtool -p can0 1 | Cannot identify NIC: Operation not supported While there use the variable "netdev" for the "struct net_device" pointer and "dev" for the "struct gs_can" pointer as in the rest of the driver. Fixes: 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities") Link: http://lore.kernel.org/all/[email protected] Cc: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-09-21can: gs_usb: gs_can_open(): fix race dev->can.state conditionMarc Kleine-Budde1-2/+2
The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-09-21can: flexcan: flexcan_mailbox_read() fix return value for drop = trueMarc Kleine-Budde1-5/+5
The following happened on an i.MX25 using flexcan with many packets on the bus: The rx-offload queue reached a length more than skb_queue_len_max. In can_rx_offload_offload_one() the drop variable was set to true which made the call to .mailbox_read() (here: flexcan_mailbox_read()) to _always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too. can_rx_offload_irq_offload_fifo() looks as follows: | while (1) { | skb = can_rx_offload_offload_one(offload, 0); | if (IS_ERR(skb)) | continue; | if (!skb) | break; | ... | } The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is requested, even if there is no CAN frame pending. As the i.MX25 is a single core CPU, while the rx-offload processing is active, there is no thread to process packets from the offload queue. So the queue doesn't get any shorter and this results is a tight loop. Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested, return NULL if no CAN frame is pending. Changes since v1: https://lore.kernel.org/all/[email protected] - don't break in can_rx_offload_irq_offload_fifo() in case of an error, return NULL in flexcan_mailbox_read() in case of no pending CAN frame instead Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] # v5.5 Suggested-by: Uwe Kleine-König <[email protected]> Reviewed-by: Uwe Kleine-König <[email protected]> Tested-by: Thorsten Scherer <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.