aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-20hwmon: (asus-ec-sensors) add doc entry for PRIME X470-PROEugene Shalygin1-0/+1
Add PRIME X470-PRO to the list of supported boards. Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (asus-ec-sensors) add PRIME X470-PRO boardEugene Shalygin1-0/+43
This board is supposed to be handled by the asus-wmi-sensors driver, but due to a buggy WMI implementation the driver and the official ASUS software make the BIOS hang together with fan controls [1, 2]. This driver complements values provided by the SIO chip and does not freeze the BIOS, as tested by a user [2]. [1] https://github.com/electrified/asus-wmi-sensors/blob/master/README.md [2] https://github.com/zeule/asus-ec-sensors/issues/12 Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (asus-ec-sensors) add support for board familiesEugene Shalygin1-5/+35
DSDT code for AMD 400-series chipset shows that sensor addresses differ for this generation from those for the AMD 500-series boards. Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (asus-ec-sensors) implement locking via the ACPI global lockEugene Shalygin2-26/+101
For some board models ASUS uses the global ACPI lock to guard access to the hardware, so do we. Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (asus-ec-sensors) introduce ec_board_info struct for board dataEugene Shalygin1-89/+123
We need to keep some more information about the current board than just the sensors set, and with more boards to add the dmi id array grows quickly. Our probe code is always the same so let's switch to a custom test code and a custom board info array. That allows us to omit board vendor string (ASUS uses two strings that differ in case) in the board info and use case-insensitive comparison, and also do not duplicate sensor definitions for such board variants as " (WI-FI)" when sensors are identical to the base variant. Also saves a quarter of the module size by replacing big dmi_system_id structs with smaller ones. Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (occ) Delay hwmon registration until user requestEddie James5-90/+156
Instead of registering the hwmon device at probe time, use the existing "occ_active" sysfs file to control when the driver polls the OCC for sensor data and registers with hwmon. The reason for this change is that the SBE, which is the device by which the driver communicates with the OCC, cannot handle communications during certain system state transitions, resulting in unrecoverable system errors. Signed-off-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (nct6775) Split core and platform driverZev Weiss6-1433/+1526
This splits the nct6775 driver into an interface-independent core and a separate platform driver that wraps inb/outb port I/O (or asuswmi methods) around that core. Signed-off-by: Zev Weiss <[email protected]> Tested-by: Renze Nicolai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (nct6775) Convert S_I* permissions macros to octalZev Weiss1-95/+64
Checkpatch has been warning about these for a while; the octal versions are both more comprehensible and more concise. Signed-off-by: Zev Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (nct6775) Add read-only modeZev Weiss1-6/+12
When enabled, all write bits are removed from the modes of all sysfs attribute files. This provides a bit of infrastructure for the upcoming i2c version of this driver, which should generally avoid writes to device registers so as not to interfere with simultaneous use of the device via the LPC interface. Signed-off-by: Zev Weiss <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (nct6775) Rearrange attr-group initializationZev Weiss1-42/+42
We now track the number of attribute groups in nct6775_data, as a measure to simplify handling differences in the set of enabled attribute groups between nct6775 drivers (platform & i2c). As a side effect, we also reduce the amount of IS_ERR()/PTR_ERR() boilerplate a bit. Signed-off-by: Zev Weiss <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (nct6775) Convert register access to regmap APIZev Weiss1-315/+662
This replaces the nct6775_data->{read,write}_value function pointers with a regmap. The major difference is that the regmap access functions may fail, and hence require checking at each call site. While the existing WMI register-access code had potential failure paths, they were masked by the fact that the read_value() function returned the register value directly, and hence squashed errors undetectably by simply returning zero, and while the write_value() functions were capable of reporting errors, all callers ignored them. This improves the robustness of the existing code, and also prepares the driver for an i2c version to be added soon, for which register accesses are much more likely to actually fail. The conversion of the register-access call sites is largely mechanical (reading a register now returns the value via an out-param pointer, and returned errors must be checked for and propagated to callers), though the nct6775_write_fan_div() function is refactored slightly to avoid duplicating nearly identical (and now lengthier) code in each switch case. Signed-off-by: Zev Weiss <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (dell-smm) Warn if SMM call took a very long time to executeArmin Wolf1-0/+6
If a particular SMM call takes a very long time to execute, the user might experience audio problems. Print a warning if a particular SMM call took over 0.250 seconds to execute, so the user can check whether or not possible audio problems are caused by this driver. Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (dell-smm) Cleanup init codeArmin Wolf1-6/+3
The default values for i8k_fan_mult and i8k_fan_max should be assigend only if the values specified as module params or in DMI are invalid/missing. Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (dell-smm) Avoid unnecessary SMM calls during initArmin Wolf1-23/+14
When the driver tries to detect the fan multiplier during module initialisation, it issues one SMM call for each fan. Those SMM calls are however redundant and also try to query fans which may not be present. Fix that by detecting the fan multiplier during hwmon initialisation when no extra SMM calls are needed. Also dont assume the last nominal speed entry to be the biggest and instead check all entries. Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (lm75) Add Atmel AT30TS74 supportPeter Rosin2-0/+15
Atmel (now Microchip) AT30TS74 is an LM75 compatible sensor. Add it. Signed-off-by: Peter Rosin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20dt-bindings: hwmon: Add Atmel AT30TS74Peter Rosin1-0/+1
Document the Atmel (now Microchip) AT30TS74 which is an LM75 based temperature sensor. Acked-by: Rob Herring <[email protected]> Signed-off-by: Peter Rosin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (tmp401) Fix incorrect return value of tmp401_init_clientCamel Guo1-1/+1
When ti,n-factor, ti,beta-compentation are not defined in devicetree, of_property_read_u32|s32 returns -EINVAL. In this case, tmp401_init_client should return 0 instead of simply pass ret to its caller. Signed-off-by: Camel Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (pmbus/max16601) Add MAX16602 supportAtif Ofluoglu3-7/+18
Adding another MAX16602 chip support to MAX16601 driver Tested with MAX16602 works as expected. Signed-off-by: Atif Ofluoglu <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (aquacomputer_d5next) Add support for Aquacomputer FarbwerkJack Doan4-8/+38
Extend aquacomputer_d5next driver to expose hardware temperature sensors of the Aquacomputer Farbwerk RGB controller, which communicates through a proprietary USB HID protocol. Four temperature sensors are available. Additionally, serial number and firmware version are exposed through debugfs. Also, add Jack Doan to MAINTAINERS for this driver. Signed-off-by: Jack Doan <[email protected]> Signed-off-by: Aleksa Savic <[email protected]> Link: https://lore.kernel.org/r/YmTcrq8Gzel0zYYD@jackdesk Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (dell-smm) Update Documentation regarding firmware bugsArmin Wolf1-0/+2
When adding the Inspiron 3505 to the fan type blacklist, the Documentation was not updated to mention the firmware bug on this machine. Fix that. Fixes: 6ba463edccb9 (hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist) Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (jc42) Add support for S-34TS04AOleksandr Shamray1-0/+6
S-34TS04A is a JC42 compatible 2-wire serial EEPROM with temperature sensor from Seiko Instruments/ABLIC. Signed-off-by: Oleksandr Shamray <[email protected]> Reviewed-by: Vadim Pasternak <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20hwmon: (tmp401) Add support of three advanced featuresCamel Guo1-1/+43
tmp401 driver supports TMP401, TMP411 and TMP43X temperature sensors. According to their datasheet: - all of them support extended temperature range feature; - TMP411 and TPM43X support n-factor correction feature; - TMP43X support beta compensation feature. In order to support setting them during bootup, this commit reads ti,extended-range-enable, ti,n-factor and ti,beta-compensation and set the corresponding registers during probing. Signed-off-by: Camel Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20dt-bindings: hwmon: Add TMP401, TMP411 and TMP43xCamel Guo2-0/+106
Document the TMP401, TMP411 and TMP43x device devicetree bindings Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Camel Guo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-05-20Merge branch 'for-next/esr-elx-64-bit' into for-next/coreCatalin Marinas27-140/+147
* for-next/esr-elx-64-bit: : Treat ESR_ELx as a 64-bit register. KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high KVM: arm64: Treat ESR_EL2 as a 64-bit register arm64: Treat ESR_ELx as a 64-bit register arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall arm64: Make ESR_ELx_xVC_IMM_MASK compatible with assembly
2022-05-20Merge branch 'for-next/kselftest' into for-next/coreCatalin Marinas42-116/+2761
* for-next/kselftest: (32 commits) : arm64 kselftest updates. kselftest/arm64: Explicitly build no BTI tests with BTI disabled kselftest/arm64: bti: force static linking selftests/arm64: Use switch statements in mte_common_util.c selftests/arm64: Remove casts to/from void in check_tags_inclusion selftests/arm64: Check failures to set tags in check_tags_inclusion selftests/arm64: Allow zero tags in mte_switch_mode() selftests/arm64: Log errors in verify_mte_pointer_validity() kselftest/arm64: Fix ABI header directory location selftests/arm64: Fix O= builds for the floating point tests selftests/arm64: Clean the fp helper libraries selftests/arm64: Define top_srcdir for the fp tests selftests/arm64: Use TEST_GEN_PROGS_EXTENDED in the FP Makefile kselftest/arm64: fix array_size.cocci warning selftests/arm64: Add a testcase for handling of ZA on clone() kselftest/arm64: Add SME support to syscall ABI test kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Handle ZA signal context in core code ...
2022-05-20Merge branch 'for-next/sysreg-gen' into for-next/coreCatalin Marinas19-220/+784
* for-next/sysreg-gen: (32 commits) : Automatic system register definition generation. arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR arm64/sysreg: Support generation of RAZ fields arm64/sme: Remove _EL0 from name of SVCR - FIXME sysreg.h arm64/sme: Standardise bitfield names for SVCR arm64/sme: Drop SYS_ from SMIDR_EL1 defines arm64/fp: Rename SVE and SME LEN field name to _WIDTH arm64/fp: Make SVE and SME length register definition match architecture arm64/sysreg: fix odd line spacing arm64/sysreg: improve comment for regs without fields ...
2022-05-20Merge branches 'for-next/sme', 'for-next/stacktrace', ↵Catalin Marinas74-402/+2991
'for-next/fault-in-subpage', 'for-next/misc', 'for-next/ftrace' and 'for-next/crashkernel', remote-tracking branch 'arm64/for-next/perf' into for-next/core * arm64/for-next/perf: perf/arm-cmn: Decode CAL devices properly in debugfs perf/arm-cmn: Fix filter_sel lookup perf/marvell_cn10k: Fix tad_pmu_event_init() to check pmu type first drivers/perf: hisi: Add Support for CPA PMU drivers/perf: hisi: Associate PMUs in SICL with CPUs online drivers/perf: arm_spe: Expose saturating counter to 16-bit perf/arm-cmn: Add CMN-700 support perf/arm-cmn: Refactor occupancy filter selector perf/arm-cmn: Add CMN-650 support dt-bindings: perf: arm-cmn: Add CMN-650 and CMN-700 perf: check return value of armpmu_request_irq() perf: RISC-V: Remove non-kernel-doc ** comments * for-next/sme: (30 commits) : Scalable Matrix Extensions support. arm64/sve: Move sve_free() into SVE code section arm64/sve: Make kernel FPU protection RT friendly arm64/sve: Delay freeing memory in fpsimd_flush_thread() arm64/sme: More sensibly define the size for the ZA register set arm64/sme: Fix NULL check after kzalloc arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding() arm64/sme: Provide Kconfig for SME KVM: arm64: Handle SME host state when running guests KVM: arm64: Trap SME usage in guest KVM: arm64: Hide SME system registers from guests arm64/sme: Save and restore streaming mode over EFI runtime calls arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Add ptrace support for ZA arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Implement ZA signal handling arm64/sme: Implement streaming SVE signal handling arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement traps and syscall handling for SME arm64/sme: Implement ZA context switching arm64/sme: Implement streaming SVE context switching ... * for-next/stacktrace: : Stacktrace cleanups. arm64: stacktrace: align with common naming arm64: stacktrace: rename stackframe to unwind_state arm64: stacktrace: rename unwinder functions arm64: stacktrace: make struct stackframe private to stacktrace.c arm64: stacktrace: delete PCS comment arm64: stacktrace: remove NULL task check from unwind_frame() * for-next/fault-in-subpage: : btrfs search_ioctl() live-lock fix using fault_in_subpage_writeable(). btrfs: Avoid live-lock in search_ioctl() on hardware with sub-page faults arm64: Add support for user sub-page fault probing mm: Add fault_in_subpage_writeable() to probe at sub-page granularity * for-next/misc: : Miscellaneous patches. arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: mm: Make arch_faults_on_old_pte() check for migratability arm64: mte: Clean up user tag accessors arm64/hugetlb: Drop TLB flush from get_clear_flush() arm64: Declare non global symbols as static arm64: mm: Cleanup useless parameters in zone_sizes_init() arm64: fix types in copy_highpage() arm64: Set ARCH_NR_GPIO to 2048 for ARCH_APPLE arm64: cputype: Avoid overflow using MIDR_IMPLEMENTOR_MASK arm64: document the boot requirements for MTE arm64/mm: Compute PTRS_PER_[PMD|PUD] independently of PTRS_PER_PTE * for-next/ftrace: : ftrace cleanups. arm64/ftrace: Make function graph use ftrace directly ftrace: cleanup ftrace_graph_caller enable and disable * for-next/crashkernel: : Support for crashkernel reservations above ZONE_DMA. arm64: kdump: Do not allocate crash low memory if not needed docs: kdump: Update the crashkernel description for arm64 of: Support more than one crash kernel regions for kexec -s of: fdt: Add memory for devices by DT property "linux,usable-memory-range" arm64: kdump: Reimplement crashkernel=X arm64: Use insert_resource() to simplify code kdump: return -ENOENT if required cmdline option does not exist
2022-05-20arm64/sysreg: Generate definitions for FAR_ELxMark Brown2-3/+12
Convert FAR_ELx to automatic register generation as per DDI0487H.a. In the architecture these registers have a single field "named" as "Faulting Virtual Address for synchronous exceptions taken to ELx" occupying the entire register, in order to fit in with the requirement to describe the contents of the register I have created a single field named ADDR. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20arm64/sysreg: Generate definitions for DACR32_EL2Mark Brown2-1/+20
Convert DACR32_EL2 to automatic register generation as per DDI0487H.a, no functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20arm64/sysreg: Generate definitions for CSSELR_EL1Mark Brown2-2/+7
Convert CSSELR_EL1 to automatic generation as per DDI0487H.a, no functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20KVM: x86/mmu: fix NULL pointer dereference on guest INVPCIDPaolo Bonzini1-2/+4
With shadow paging enabled, the INVPCID instruction results in a call to kvm_mmu_invpcid_gva. If INVPCID is executed with CR0.PG=0, the invlpg callback is not set and the result is a NULL pointer dereference. Fix it trivially by checking for mmu->invlpg before every call. There are other possibilities: - check for CR0.PG, because KVM (like all Intel processors after P5) flushes guest TLB on CR0.PG changes so that INVPCID/INVLPG are a nop with paging disabled - check for EFER.LMA, because KVM syncs and flushes when switching MMU contexts outside of 64-bit mode All of these are tricky, go for the simple solution. This is CVE-2022-1789. Reported-by: Yongkang Jia <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20arm64/sysreg: Generate definitions for CPACR_ELxMark Brown2-2/+20
Convert the CPACR system register definitions to be automatically generated using the definitions in DDI0487H.a. The kernel does have some additional definitions for subfields of SMEN, FPEN and ZEN which are not identified as distinct subfields in the architecture so the definitions are not updated as part of this patch. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20arm64/sysreg: Generate definitions for CONTEXTIDR_ELxMark Brown2-2/+17
Convert the various CONTEXTIDR_ELx register definitions to be automatically generated following the definitions in DDI0487H.a. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20arm64/sysreg: Generate definitions for CLIDR_EL1Mark Brown2-1/+16
Convert CLIDR_EL1 to be automatically generated with definition as per DDI0487H.a. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-20KVM: x86: hyper-v: fix type of valid_bank_maskYury Norov1-2/+2
In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long, but is used as u64, which is wrong for i386, and has been spotted by LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with hweight64()" https://lore.kernel.org/lkml/[email protected]/ But it's wrong even without that patch because now bitmap_weight() dereferences a word after valid_bank_mask on i386. >> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type +[-Wshift-count-overflow] 21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) | ^~ include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8' 10 | ((!!((w) & (1ULL << 0))) + \ | ^ include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16' 20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) | ^~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32' 21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) | ^~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64' 29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) | ^~~~~~~~~~~~~~~~~ arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64' 1983 | if (hc->var_cnt != hweight64(valid_bank_mask)) | ^~~~~~~~~ CC: Borislav Petkov <[email protected]> CC: Dave Hansen <[email protected]> CC: H. Peter Anvin <[email protected]> CC: Ingo Molnar <[email protected]> CC: Jim Mattson <[email protected]> CC: Joerg Roedel <[email protected]> CC: Paolo Bonzini <[email protected]> CC: Sean Christopherson <[email protected]> CC: Thomas Gleixner <[email protected]> CC: Vitaly Kuznetsov <[email protected]> CC: Wanpeng Li <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Reported-by: kernel test robot <[email protected]> Signed-off-by: Yury Norov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20KVM: Free new dirty bitmap if creating a new memslot failsSean Christopherson1-1/+1
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the new memslot's dirty bitmap during a CREATE action if kvm_arch_prepare_memory_region() fails. The logic is supposed to detect if the bitmap was allocated and thus needs to be freed, versus if the bitmap was inherited from the old memslot and thus needs to be kept. If there is no old memslot, then obviously the bitmap can't have been inherited The bug was exposed by commit 86931ff7207b ("KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy for syzkaller to trigger failure during kvm_arch_prepare_memory_region(), but the bug can be hit other ways too, e.g. due to -ENOMEM when allocating x86's memslot metadata. The backtrace from kmemleak: __vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195 __vmalloc_node mm/vmalloc.c:3232 [inline] __vmalloc+0x49/0x50 mm/vmalloc.c:3246 __vmalloc_array mm/util.c:671 [inline] __vcalloc+0x49/0x70 mm/util.c:694 kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319 kvm_prepare_memory_region virt/kvm/kvm_main.c:1551 kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782 __kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949 kvm_set_memory_region virt/kvm/kvm_main.c:1962 kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974 kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528 vfs_ioctl fs/ioctl.c:51 __do_sys_ioctl fs/ioctl.c:870 __se_sys_ioctl fs/ioctl.c:856 __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae And the relevant sequence of KVM events: ioctl(3, KVM_CREATE_VM, 0) = 4 ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0, flags=KVM_MEM_LOG_DIRTY_PAGES, guest_phys_addr=0x10000000000000, memory_size=4096, userspace_addr=0x20fe8000} ) = -1 EINVAL (Invalid argument) Fixes: 244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go") Cc: [email protected] Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20Merge tag 'irqchip-5.19' of ↵Thomas Gleixner862-6028/+8340
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Add new infrastructure to stop gpiolib from rewriting irq_chip structures behind our back. Convert a few of them, but this will obviously be a long effort. - A bunch of GICv3 improvements, such as using MMIO-based invalidations when possible, and reducing the amount of polling we perform when reconfiguring interrupts. - Another set of GICv3 improvements for the Pseudo-NMI functionality, with a nice cleanup making it easy to reason about the various states we can be in when an NMI fires. - The usual bunch of misc fixes and minor improvements. Link: https://lore.kernel.org/all/[email protected]
2022-05-20random: wire up fops->splice_{read,write}_iter()Jens Axboe1-0/+4
Now that random/urandom is using {read,write}_iter, we can wire it up to using the generic splice handlers. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Jens Axboe <[email protected]> [Jason: added the splice_write path. Note that sendfile() and such still does not work for read, though it does for write, because of a file type restriction in splice_direct_to_actor(), which I'll address separately.] Cc: Al Viro <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-05-20random: convert to using fops->write_iter()Jens Axboe1-32/+35
Now that the read side has been converted to fix a regression with splice, convert the write side as well to have some symmetry in the interface used (and help deprecate ->write()). Signed-off-by: Jens Axboe <[email protected]> [Jason: cleaned up random_ioctl a bit, require full writes in RNDADDENTROPY since it's crediting entropy, simplify control flow of write_pool(), and incorporate suggestions from Al.] Cc: Al Viro <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-05-20random: convert to using fops->read_iter()Jens Axboe1-36/+29
This is a pre-requisite to wiring up splice() again for the random and urandom drivers. It also allows us to remove the INT_MAX check in getrandom(), because import_single_range() applies capping internally. Signed-off-by: Jens Axboe <[email protected]> [Jason: rewrote get_random_bytes_user() to simplify and also incorporate additional suggestions from Al.] Cc: Al Viro <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-05-20gpio: mvebu/pwm: Refuse requests with inverted polarityUwe Kleine-König1-0/+3
The driver doesn't take struct pwm_state::polarity into account when configuring the hardware, so refuse requests for inverted polarity. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-05-20gpio: gpio-vf610: do not touch other bits when set the target bitHaibo Chen1-2/+6
For gpio controller contain register PDDR, when set one target bit, current logic will clear all other bits, this is wrong. Use operator '|=' to fix it. Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support") Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Haibo Chen <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-05-20perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT eventsIan Rogers1-3/+14
Stat events can come from disk and so need a degree of validation. They contain a CPU which needs looking up via CPU map to access a counter. Add the CPU to index translation, alongside validity checking. Discussion thread: https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/ Fixes: 7ac0089d138f80dc ("perf evsel: Pass cpu not cpu map index to synthesize") Reported-by: Michael Petlan <[email protected]> Suggested-by: Michael Petlan <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Dave Marchevsky <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: Kan Liang <[email protected]> Cc: KP Singh <[email protected]> Cc: Lv Ruyi <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Cc: Peter Zijlstra <[email protected]> Cc: Quentin Monnet <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Xing Zhengjun <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-20KVM: eventfd: Fix false positive RCU usage warningWanpeng Li1-1/+2
The splat below can be seen when running kvm-unit-test: ============================= WARNING: suspicious RCU usage 5.18.0-rc7 #5 Tainted: G IOE ----------------------------- /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by qemu-system-x86/35124: #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm] #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm] #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm] #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm] stack backtrace: CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5 Call Trace: <TASK> dump_stack_lvl+0x6c/0x9b irqfd_resampler_ack+0xfd/0x110 [kvm] kvm_notify_acked_gsi+0x32/0x90 [kvm] kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm] kvm_hv_set_msr_common+0xec1/0x1160 [kvm] kvm_set_msr_common+0x7c3/0xf60 [kvm] vmx_set_msr+0x394/0x1240 [kvm_intel] kvm_set_msr_ignored_check+0x86/0x200 [kvm] kvm_emulate_wrmsr+0x4f/0x1f0 [kvm] vmx_handle_exit+0x6fb/0x7e0 [kvm_intel] vcpu_enter_guest+0xe5a/0x1900 [kvm] kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm] kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix the false positive by using list_for_each_entry_srcu(). Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20Merge tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme into ↵Jens Axboe3-10/+117
for-5.19/drivers Pull NVMe updates from Christoph: "nvme updates for Linux 5.19 - set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni) - add support for TP4084 - Time-to-Ready Enhancements (me)" * tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme: nvme: set non-mdts limits in nvme_scan_work nvme: add support for TP4084 - Time-to-Ready Enhancements
2022-05-20perf build: Fix check for btf__load_from_kernel_by_id() in libbpfArnaldo Carvalho de Melo5-1/+22
Avi Kivity reported a problem where the __weak btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in turn called back to btf__load_from_kernel_by_id(), resulting in an endless loop. Fix this by adding a feature test to check if btf__load_from_kernel_by_id() is available when building perf with LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id() since at that time it didn't exist at all. Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC where we don't have btf__load_from_kernel_by_id() and thus its feature test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID: $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’: test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration] 6 | return btf__load_from_kernel_by_id(20151128, NULL); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors $ $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id 00000000005ba180 T btf__load_from_kernel_by_id $ $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf /tmp/build/perf-urgent/perf: file format elf64-x86-64 <SNIP> 00000000005ba180 <btf__load_from_kernel_by_id>: #include "record.h" #include "util/synthetic-events.h" #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID struct btf *btf__load_from_kernel_by_id(__u32 id) { 5ba180: 55 push %rbp 5ba181: 48 89 e5 mov %rsp,%rbp 5ba184: 48 83 ec 10 sub $0x10,%rsp 5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5ba18f: 00 00 5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp) 5ba195: 31 c0 xor %eax,%eax struct btf *btf; #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wdeprecated-declarations" int err = btf__get_from_id(id, &btf); 5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi 5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt> 5ba1a0: 89 c2 mov %eax,%edx #pragma GCC diagnostic pop return err ? ERR_PTR(err) : btf; 5ba1a2: 48 98 cltq 5ba1a4: 85 d2 test %edx,%edx 5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax } <SNIP> Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions") Reported-by: Avi Kivity <[email protected]> Link: https://lore.kernel.org/linux-perf-users/[email protected] Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/linux-perf-users/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-20nvme: enable uring-passthrough for admin commandsKanchan Joshi4-0/+27
Add two new opcodes that userspace can use for admin commands: NVME_URING_CMD_ADMIN : non-vectroed NVME_URING_CMD_ADMIN_VEC : vectored variant Wire up support when these are issued on controller node(/dev/nvmeX). Signed-off-by: Kanchan Joshi <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-05-20nvme: helper for uring-passthrough checksKanchan Joshi1-8/+16
Factor out a helper consolidating the error checks, and fix typo in a comment too. This is in preparation to support admin commands on this path. Signed-off-by: Kanchan Joshi <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-05-20Merge tag 'nand/for-5.19' into mtd/nextMiquel Raynal30-129/+701
NAND core: * Print offset instead of page number for bad blocks Raw NAND controller drivers: * Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() * CS553X: simplify the return expression of cs553x_write_ctrl_byte() * Davinci: Remove redundant unsigned comparison to zero * Denali: Use managed device resources * GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function * Intel: Fix possible null-ptr-deref in ebu_nand_probe() * MPC5121: Check before clk_disable_unprepare() not needed * Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module * OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible * Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly * Rockchip: Check before clk_disable_unprepare() not needed * TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: * Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: * Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG * XTX: Add support for XT26G0xA Signed-off-by: Miquel Raynal <[email protected]>
2022-05-20Merge tag 'spi-nor/for-5.19' into mtd/nextMiquel Raynal848-6098/+8454
SPI NOR core changes: - Read back written SR value to make sure the write was done correctly. - Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. - Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. - Clarify rdsr dummy cycles documentation. - Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. - Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. - Rework Micron and Cypress Octal DTR enable methods to improve readability. - Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. - Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant. Signed-off-by: Miquel Raynal <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.