| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Denis Ciocca <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m:
drivers/built-in.o: In function `ad5064_i2c_write':
drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send'
drivers/built-in.o: In function `ad5064_i2c_register_driver':
drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `ad5064_i2c_unregister_driver':
drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1
When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support.
Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m.
The real fix though is to break the driver apart into a SPI part, an I2C part
and a common part. But that's something for 3.11 while this is something for
3.10/stable.
Reported-by: Wu Fengguang <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Fix to return -EINVAL in the i2c device found error handling
case instead of 0, as done elsewhere in this function.
And also correct the fail1 and fail2 lable to do the right thing.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This fixes 'preenable failed: -EINVAL' error when using this driver.
Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
As suggested by David Howells <[email protected]>, use
asm-generic/param.h and uapi/asm-generic/param.h for AVR32.
It also fixes building warnings caused by redefinitions of HZ:
In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
from include/linux/timex.h:63,
from include/linux/jiffies.h:8,
from include/linux/ktime.h:25,
from include/linux/timer.h:5,
from include/linux/workqueue.h:8,
from include/linux/srcu.h:34,
from include/linux/notifier.h:15,
from include/linux/memory_hotplug.h:6,
from include/linux/mmzone.h:777,
from include/linux/gfp.h:4,
from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined
In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4,
from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
from include/linux/timex.h:63,
from include/linux/jiffies.h:8,
from include/linux/ktime.h:25,
from include/linux/timer.h:5,
from include/linux/workqueue.h:8,
from include/linux/srcu.h:34,
from include/linux/notifier.h:15,
from include/linux/memory_hotplug.h:6,
from include/linux/mmzone.h:777,
from include/linux/gfp.h:4,
from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition
Signed-off-by: Jiang Liu <[email protected]>
Cc: Hans-Christian Egtvedt <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: [email protected]
Signed-off-by: Hans-Christian Egtvedt <[email protected]>
|
|
There was an extra ';' character added to the end of the if statement
which means that it always prints that the /proc entry wasn't created
even though it was.
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: David Howells <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
Waiting for all subframes of an existing aggregation session to drain
before allowing mac80211 to start a new one is fragile and deadlocks
caused by this behavior have been observed.
Since mac80211 has proper synchronization for aggregation session
start/stop handling, a better approach to session handling is to simply
allow mac80211 to start a new session at any time. This requires
changing the code to discard any packets outside of the BlockAck window
in the A-MPDU software retry code.
This patch implements the above and also simplifies the code.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
"Merge tag 'nfc-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
This is the first batch of NFC fixes for 3.10, and it contains:
- 3 fixes for the NFC MEI support:
* We now depend on the correct Kconfig symbol.
* We register an MEI event callback whenever we enable an NFC device,
otherwise we fail to read anything after an enable/disable cycle.
* We only disable an MEI device from its disable mey_phy_ops,
preventing useless consecutive disable calls.
- An NFC Makefile cleanup, as I forgot to remove a commented out line when
moving the LLCP code to the NFC top level directory."
Signed-off-by: John W. Linville <[email protected]>
|
|
build warning after merge of the tty.current tree)
Fix build warning at mxser.c introduced by dfc7b837c7f9 (tty: mxser: fix
usage of opmode_ioaddr)
Signed-off-by: Matwey V. Kornilov <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
virt_to_page() is typically implemented as a macro containing a cast so
that it will accept both pointers and unsigned long without causing a
warning.
But MIPS virt_to_page() uses virt_to_phys which is a function so passing
an unsigned long will cause a warning:
CC mm/page_alloc.o
mm/page_alloc.c: In function ‘free_reserved_area’:
mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default]
arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’
All others users of virt_to_page() in mm/ are passing a void *.
Signed-off-by: Ralf Baechle <[email protected]>
Reported-by: Eunbong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes
Pull mfd fixes from Samuel Ortiz:
"This is the first batch of MFD fixes for 3.10.
It's bigger than I would like, most of it is due to the big ab/db8500
merge that went through during the 3.10 merge window.
So we have:
- Some build fixes for the tps65912 and ab8500 drivers.
- A couple of build fixes for the the si476x driver with pre 4.3 gcc
compilers.
- A few runtime breakage fixes (probe failures or oopses) for the
ab8500 and db8500 drivers.
- Some sparse or regular gcc warning fixes for the si476x, ab8500 and
cros_ec drivers."
* tag 'mfd-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
mfd: ab8500-sysctrl: Let sysctrl driver work without pdata
mfd: db8500-prcmu: Update stored DSI PLL divider value
mfd: ab8500-sysctrl: Always enable pm_power_off handler
mfd: ab8500-core: Pass GPADC compatible string to MFD core
mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal
mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl
mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource
mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning
mfd: ab8500-sysctrl: Set sysctrl_dev during probe
mfd: ab8500-sysctrl: Fix sparse warning
mfd: abx500-core: Fix sparse warning
mfd: ab8500: Debugfs code depends on gpadc
mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads
mfd: cros_ec_spi: Use %z to format pointer differences
mfd: si476x: Do not use binary constants
mfd: tps65912: Select MFD_CORE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio fixes from Rusty Russell:
"A build fix and a uapi exposure fix. The build fix is later than I
liked, but my first version broke linux-next due to overzealous header
clean."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_console: fix uapi header
Hoist memcpy_fromiovec/memcpy_toiovec into lib/
|
|
As a relatively new ABI, N64 only had getdents syscall while other modern
architectures have getdents64.
This was noticed when Python 3.3 shifted to the latter one for aarch64.
[[email protected]: The history of getdents64 is a little complicated.
Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.]
added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213,
then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul
of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.]
Signed-off-by: Aron Xu <[email protected]>
Acked-by: David Daney <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/5285/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Fix to check double free of insn_slot at arch_remove_kprobe
as other arches do.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: David Daney <[email protected]>
Cc: Maneesh Soni <[email protected]>
Cc: Victor Kamensky <[email protected]>
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/5293/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock().
Memory slots should be acccessed from a SRCU read section.
- kvm_mips_map_page() now returns an error code to it's callers, instead of
calling panic() if it cannot find a mapping for a particular gfn.
Signed-off-by: Sanjay Lal <[email protected]>
Signed-off-by: Gleb Natapov <[email protected]>
|
|
user visible API.
Signed-off-by: Sanjay Lal <[email protected]>
Signed-off-by: Gleb Natapov <[email protected]>
|
|
local_irq_enable() may expand into very different code, so it rather should
stay in C. Also this keeps the assembler code size constant which keeps
the rollback code simple. So it's best to split r4k_wait into two parts,
one C and one assembler.
Finally add the local_irq_enable() to r4k_wait to ensure the WAIT
instruction in __r4k_wait() will work properly.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The generic idle loop has already disabled interrupts so this is redundant.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Without this, the
WARN_ON_ONCE(irqs_disabled());
in the idle loop will be triggered.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Duplicate and has no business in this header file.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
If <linux/linkage.h> has not been included before <linux/printk.h>,
a build error like the below one will result:
CC arch/mips/kernel/idle.o
In file included from arch/mips/kernel/idle.c:17:0:
include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’
include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’
In file included from include/linux/kernel.h:14:0,
from include/linux/sched.h:15,
from arch/mips/kernel/idle.c:18:
include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’:
include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration]
Fixed by including <linux/linkage.h>.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
A check for a valid plat->sysctrl was introduced in:
2377e52 mfd: ab8500-sysctrl: Error check clean up
but the driver works just fine even without that initialization data,
and enforcing it breaks existing platforms for no reason.
This patch removes the check and let the driver go ahead with probe.
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Fabio Baltieri <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
|
|
On errors in batadv_mesh_init(), bat_counters will be freed in both
batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this
by returning earlier from batadv_softif_init_late() in case of errors in
batadv_mesh_init() and by setting bat_counters to NULL after freeing.
Signed-off-by: Martin Hundebøll <[email protected]>
Signed-off-by: Marek Lindner <[email protected]>
Signed-off-by: Antonio Quartulli <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem fix from Bryan Wu.
* 'leds-fixes-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
leds: leds-gpio: reserve gpio before using it
|
|
This reverts commit a99d76f (leds: leds-gpio: use gpio_request_one)
and commit 2d7c22f (leds: leds-gpio: set devm_gpio_request_one()
flags param correctly) which was a fix of the first one.
The conversion to devm_gpio_request in commit e3b1d44c (leds:
leds-gpio: use devm_gpio_request_one) is not reverted.
The problem is that gpio_cansleep() and gpio_get_value_cansleep()
calls can crash if the gpio is not first reserved. Incidentally this
same bug existed earlier and was fixed similarly in commit d95cbe61
(leds: Fix potential leds-gpio oops). But the OOPS is real. It happens
when GPIOs are provided by module which is not yet loaded.
So this fixes the following BUG during my ALIX boot (3.9.2-vanilla):
BUG: unable to handle kernel NULL pointer dereference at 0000004c
IP: [<c11287d6>] __gpio_cansleep+0xe/0x1a
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core
geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat
ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd
ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop
Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine
EIP: 0060:[<c11287d6>] EFLAGS: 00010282 CPU: 0
EIP is at __gpio_cansleep+0xe/0x1a
EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000
ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000)
Stack:
cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254
d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47
c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000
Call Trace:
[<d09471cb>] gpio_led_probe+0xba/0x203 [leds_gpio]
[<c118cd59>] platform_drv_probe+0x26/0x48
[<c118ba47>] driver_probe_device+0x75/0x15c
[<c118bb75>] __driver_attach+0x47/0x63
[<c118a727>] bus_for_each_dev+0x3c/0x66
[<c118b6f9>] driver_attach+0x14/0x16
[<c118bb2e>] ? driver_probe_device+0x15c/0x15c
[<c118b3d5>] bus_add_driver+0xbd/0x1bc
[<d08b4000>] ? 0xd08b3fff
[<d08b4000>] ? 0xd08b3fff
[<c118bffc>] driver_register+0x74/0xec
[<d08b4000>] ? 0xd08b3fff
[<c118c8e8>] platform_driver_register+0x38/0x3a
[<d08b400d>] gpio_led_driver_init+0xd/0x1000 [leds_gpio]
[<c100116c>] do_one_initcall+0x6b/0x10f
[<d08b4000>] ? 0xd08b3fff
[<c105e918>] load_module+0x1631/0x1907
[<c10975d6>] ? insert_vmalloc_vmlist+0x14/0x43
[<c1098d5b>] ? __vmalloc_node_range+0x13e/0x15f
[<c105ec50>] sys_init_module+0x62/0x77
[<c1257888>] syscall_call+0x7/0xb
EIP: [<c11287d6>] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc
CR2: 000000000000004c
---[ end trace 5308fb20d2514822 ]---
Signed-off-by: Timo Teräs <[email protected]>
Cc: Sachin Kamat <[email protected]>
Cc: Raphael Assenat <[email protected]>
Cc: Trent Piepho <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Arnaud Patard <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Acked-by: Jingoo Han <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c bugfixes from Wolfram Sang:
"These should have been in rc2 but I missed it due to working on devm
longer than expected.
There is one ID addition, since we are touching the driver anyhow.
And the feature bit documentation is one outcome of a debug session
and will make it easier for users to work around problems. The rest
is typical driver bugfixes."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: suppress lockdep warning on delete_device
i2c: mv64xxx: work around signals causing I2C transactions to be aborted
i2c: i801: Document feature bits in modinfo
i2c: designware: add Intel BayTrail ACPI ID
i2c: designware: always clear interrupts before enabling them
i2c: designware: fix RX FIFO overrun
|
|
Since commit c8801a8 (regulator: core: Mark all get and enable calls as
__must_check) we need to check the value returned by 'regulator_enable()'.
Do this check to get rid of the following build warning:
drivers/staging/imx-drm/imx-tve.c: In function 'imx_tve_probe':
drivers/staging/imx-drm/imx-tve.c:671:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Without this, I get the following problem when building kernel:
drivers/built-in.o: In function `imx_pd_connector_get_modes':
/linux-2.6/drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode'
make: *** [vmlinux] Error 1
Signed-off-by: Marek Vasut <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Fabio Estevam <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
mxser_port->opmode_ioaddr is initialized only for MOXA_MUST_MU860_HWID
chips, but no precautions have been undertaken to prevent reading and
writing to undefined port number.
Signed-off-by: Matwey V. Kornilov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This is the same controller as on Intel Lynxpoint but the
ACPI ID is different.
Signed-off-by: Heikki Krogerus <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is a race between klist_remove and klist_release. klist_remove
uses a local var waiter saved on stack. When klist_release calls
wake_up_process(waiter->process) to wake up the waiter, waiter might run
immediately and reuse the stack. Then, klist_release calls
list_del(&waiter->list) to change previous
wait data and cause prior waiter thread corrupt.
The patch fixes it against kernel 3.9.
Signed-off-by: wang, biao <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
port
tty_port_init() zeroes out the tty port, which means that we have to set the
ops pointer /after/, not before this call. Otherwise, tty_port_open will crash
when it tries to deref ops, which is now a NULL pointer.
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If NO_DMA=y:
drivers/built-in.o: In function `uio_dmem_genirq_release':
drivers/uio/uio_dmem_genirq.c:95: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `uio_dmem_genirq_open':
drivers/uio/uio_dmem_genirq.c:61: undefined reference to `dma_alloc_coherent'
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Hans J. Koch <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
After cancelling all reads from the disable hook, we need to reset the
event_cb pointer as well or else we won't be able to set a new one up
when re-enabling the device.
Acked-by: Tomas Winkler <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Linux' notion of cpuid is different from the Host's notion of CPUID. In the
call to bind the channel interrupts, we should use the host's notion of
CPU Ids. Fix this bug.
Signed-off-by: K. Y. Srinivasan <[email protected]>
Cc: Stable <[email protected]> (V3.9)
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The patch 9f81abdac362: "mei: implement mei_cl_connect function"
from Jan 8, 2013, leads to the following static checker warning:
"drivers/misc/mei/main.c:522 mei_ioctl_connect_client()
warn: check 'dev->me_clients[]' for negative offsets (-2)"
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
"An additional sysfs attribute for channel paths and a couple of bux
fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pgtable: fix ipte notify bit
s390/xpram: mark xpram as non-rotational
s390/smp: fix cpu re-scan vs. cpu state
s390/cio: add channel ID sysfs attribute
s390/ftrace: fix mcount adjustment
s390: fix gmap_ipte_notifier vs. software dirty pages
s390: disable pfmf for clear page instruction
s390/disassembler: prevent endless loop in print_fn_code()
s390: remove non existent reference to GENERIC_KERNEL_THREAD
|
|
Make it obvious to see what attribute is using bogus permissions.
Signed-off-by: Dave Young <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Modules want to call this function, so it needs to be exported.
Reported-by: Daniel Mack <[email protected]>
Cc: Kay Sievers <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Before f7b861b7a6d9 ("arm: Use generic idle loop") ARM would kill the
CPU within the rcu idle section. Now that the rcu_idle_enter()/exit()
pair have been pushed lower down in the idle loop this is no longer true
and so using RCU_NONIDLE here is no longer necessary and also harmful
because RCU is not actually idle at this point.
Cc: Russell King <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://people.freedesktop.org/~airlied/linux
Pull radeon sun/hainan support from Dave Airlie:
"Since I know its outside the merge window, but since this is new hw I
thought I'd try and provoke the new hw exception, it just fills in the
blanks in the driver for the new AMD sun and hainan chipsets."
* 'drm-radeon-sun-hainan' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: add Hainan pci ids
drm/radeon: add golden register settings for Hainan (v2)
drm/radeon: sun/hainan chips do not have UVD (v2)
drm/radeon: track which asics have UVD
drm/radeon: radeon-asic updates for Hainan
drm/radeon: fill in ucode loading support for Hainan
drm/radeon: don't touch DCE or VGA regs on Hainan (v3)
drm/radeon: fill in GPU init for Hainan (v2)
drm/radeon: add chip family for Hainan
|
|
Pull DRM fixes from Dave Airlie:
"This is just a set of nouveau and radeon fixes, the nouveau ones fix
some suspend/resume regressions since use of copy engines and some
fixes for Z compression on some newer chipsets."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/dce2: use 10khz units for audio dto calculation
drm/radeon: Fix VRAM size calculation for VRAM >= 4GB
drm/radeon: Remove superfluous variable
drm/nouveau: ensure channels are stopped before saving fences for suspend
drm/nv50/fifo: prevent races between clients updating playlists
drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini
drm/nvc0/fifo: prevent races between clients updating playlists
drm/nve0/fifo: prevent races between clients updating playlists
drm/nve0/ltcg: poke the partition count into yet another register
drm/nvc0/ltcg: fix handling of disabled partitions
drm/nvc0/ce: disable ce1 on a number of chipsets
drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode
drm/nouveau: fix build with nv50->nvc0
|
|
Enabling and disabling device is exclusively handled by the mei_phy_ops.
Signed-off-by: Samuel Ortiz <[email protected]>
|