aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-21mm/memory-failure.c: skip huge_zero_page in memory_failure()Xu Yu1-0/+13
Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again. Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com Fixes: 6a46079cf57a ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by: Xu Yu <[email protected]> Reported-by: Abaci <[email protected]> Suggested-by: Naoya Horiguchi <[email protected]> Acked-by: Naoya Horiguchi <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-21mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()Naoya Horiguchi4-42/+127
There is a race condition between memory_failure_hugetlb() and hugetlb free/demotion, which causes setting PageHWPoison flag on the wrong page. The one simple result is that wrong processes can be killed, but another (more serious) one is that the actual error is left unhandled, so no one prevents later access to it, and that might lead to more serious results like consuming corrupted data. Think about the below race window: CPU 1 CPU 2 memory_failure_hugetlb struct page *head = compound_head(p); hugetlb page might be freed to buddy, or even changed to another compound page. get_hwpoison_page -- page is not what we want now... The current code first does prechecks roughly and then reconfirms after taking refcount, but it's found that it makes code overly complicated, so move the prechecks in a single hugetlb_lock range. A newly introduced function, try_memory_failure_hugetlb(), always takes hugetlb_lock (even for non-hugetlb pages). That can be improved, but memory_failure() is rare in principle, so should not be a big problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: 761ad8d7c7b5 ("mm: hwpoison: introduce memory_failure_hugetlb()") Signed-off-by: Naoya Horiguchi <[email protected]> Reported-by: Mike Kravetz <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Reviewed-by: Mike Kravetz <[email protected]> Cc: Yang Shi <[email protected]> Cc: Dan Carpenter <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-21clk: qcom: clk-rcg2: fix gfx3d frequency calculationDmitry Baryshkov1-1/+1
Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bjorn Andersson <[email protected]> Reported-by: Rob Clark <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2022-04-21clk: microchip: mpfs: don't reset disabled peripheralsConor Dooley1-4/+0
The current clock driver for PolarFire SoC puts the hardware behind "periph" clocks into reset if their clock is disabled. CONFIG_PM was recently added to the riscv defconfig and exposed issues caused by this behaviour, where the Cadence GEM was being put into reset between its bringup & the PHY bringup: https://lore.kernel.org/linux-riscv/[email protected]/ Fix this (for now) by removing the reset from mpfs_periph_clk_disable. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <[email protected]> Signed-off-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2022-04-21f2fs: should not truncate blocks during roll-forward recoveryJaegeuk Kim1-1/+2
If the file preallocated blocks and fsync'ed, we should not truncate them during roll-forward recovery which will recover i_size correctly back. Fixes: d4dd19ec1ea0 ("f2fs: do not expose unwritten blocks to user by DIO") Cc: <[email protected]> # 5.17+ Signed-off-by: Jaegeuk Kim <[email protected]>
2022-04-22ata: pata_marvell: Check the 'bmdma_addr' beforing readingZheyu Ma1-0/+2
Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error: [ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0 Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-04-22Merge tag 'drm-msm-fixes-2022-04-20' of ↵Dave Airlie1-1/+1
https://gitlab.freedesktop.org/drm/msm into drm-fixes Revert to fix iommu regression. Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtvPo4xD2peAztDMPP2n4utb7d9WQboMFwsba9E8U2rCw@mail.gmail.com
2022-04-21Merge tag 'dmaengine-fix-5.18' of ↵Linus Torvalds8-34/+53
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - idxd device RO checks and device cleanup - dw-edma unaligned access and alignment - qcom: missing minItems in binding - mediatek pm usage fix - imx init script" * tag 'dmaengine-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dt-bindings: dmaengine: qcom: gpi: Add minItems for interrupts dmaengine: idxd: skip clearing device context when device is read-only dmaengine: idxd: add RO check for wq max_transfer_size write dmaengine: idxd: add RO check for wq max_batch_size write dmaengine: idxd: fix retry value to be constant for duration of function call dmaengine: idxd: match type for retries var in idxd_enqcmds() dmaengine: dw-edma: Fix inconsistent indenting dmaengine: dw-edma: Fix unaligned 64bit access dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources dmaengine: imx-sdma: Fix error checking in sdma_event_remap dma: at_xdmac: fix a missing check on list iterator dmaengine: imx-sdma: fix init of uart scripts dmaengine: idxd: fix device cleanup on disable
2022-04-21RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLERandy Dunlap1-1/+1
There can be lots of build errors when building cpuidle-riscv-sbi.o. They are all caused by a kconfig problem with this warning: WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n] Selected by [y]: - SOC_VIRT [=y] && CPU_IDLE [=y] so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI. Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Reviewed-by: Anup Patel <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-04-21RISC-V: mm: Fix set_satp_mode() for platform not having Sv57Anup Patel1-0/+1
When Sv57 is not available the satp.MODE test in set_satp_mode() will fail and lead to pgdir re-programming for Sv48. The pgdir re-programming will fail as well due to pre-existing pgdir entry used for Sv57 and as a result kernel fails to boot on RISC-V platform not having Sv57. To fix above issue, we should clear the pgdir memory in set_satp_mode() before re-programming. Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly") Reported-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-04-22Merge tag 'drm-intel-fixes-2022-04-20' of ↵Dave Airlie2-23/+32
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Unset enable_psr2_sel_fetch if PSR2 detection fails - Fix to detect when VRR is turned off from panel settings Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21kvm: selftests: introduce and use more page size-related constantsPaolo Bonzini8-13/+8
Clean up code that was hardcoding masks for various fields, now that the masks are included in processor.h. For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux. PAGE_SIZE in particular was defined by several tests. Suggested-by: Sean Christopherson <[email protected]> Reviewed-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21kvm: selftests: do not use bitfields larger than 32-bits for PTEsPaolo Bonzini2-115/+92
Red Hat's QE team reported test failure on access_tracking_perf_test: Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0x3fffbffff000 Populating memory : 0.684014577s Writing to populated memory : 0.006230175s Reading from populated memory : 0.004557805s ==== Test Assertion Failure ==== lib/kvm_util.c:1411: false pid=125806 tid=125809 errno=4 - Interrupted system call 1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411 2 (inlined by) addr_gpa2hva at kvm_util.c:1405 3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98 4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152 5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232 6 0x00007fefe9ff81ce: ?? ??:0 7 0x00007fefe9c64d82: ?? ??:0 No vm physical memory at 0xffbffff000 I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits PA. It turns out that the address translation for clearing idle page tracking returned a wrong result; addr_gva2gpa()'s last step, which is based on "pte[index[0]].pfn", did the calculation with 40 bits length and the high 12 bits got truncated. In above case the GPA address to be returned should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into 0xffbffff000 and the subsequent gpa2hva lookup failed. The width of operations on bit fields greater than 32-bit is implementation defined, and differs between GCC (which uses the bitfield precision) and clang (which uses 64-bit arithmetic), so this is a potential minefield. Remove the bit fields and using manual masking instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036 Reported-by: Nana Liu <[email protected]> Reviewed-by: Peter Xu <[email protected]> Tested-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang8-3/+44
Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: [email protected] Suggested-by: Sean Christpherson <[email protected]> Reported-by: Mingwei Zhang <[email protected]> Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21Merge tag 'net-5.18-rc4' of ↵Linus Torvalds40-83/+210
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from xfrm and can. Current release - regressions: - rxrpc: restore removed timer deletion Current release - new code bugs: - gre: fix device lookup for l3mdev use-case - xfrm: fix egress device lookup for l3mdev use-case Previous releases - regressions: - sched: cls_u32: fix netns refcount changes in u32_change() - smc: fix sock leak when release after smc_shutdown() - xfrm: limit skb_page_frag_refill use to a single page - eth: atlantic: invert deep par in pm functions, preventing null derefs - eth: stmmac: use readl_poll_timeout_atomic() in atomic state Previous releases - always broken: - gre: fix skb_under_panic on xmit - openvswitch: fix OOB access in reserve_sfa_size() - dsa: hellcreek: calculate checksums in tagger - eth: ice: fix crash in switchdev mode - eth: igc: - fix infinite loop in release_swfw_sync - fix scheduling while atomic" * tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) drivers: net: hippi: Fix deadlock in rr_close() selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets nfc: MAINTAINERS: add Bug entry net: stmmac: Use readl_poll_timeout_atomic() in atomic state doc/ip-sysctl: add bc_forwarding netlink: reset network and mac headers in netlink_dump() net: mscc: ocelot: fix broken IP multicast flooding net: dsa: hellcreek: Calculate checksums in tagger net: atlantic: invert deep par in pm functions, preventing null derefs can: isotp: stop timeout monitoring when no first frame was sent bonding: do not discard lowest hash bit for non layer3+4 hashing net: lan966x: Make sure to release ptp interrupt ipv6: make ip6_rt_gc_expire an atomic_t net: Handle l3mdev in ip_tunnel_init_flow l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu net/sched: cls_u32: fix possible leak in u32_init_knode() net/sched: cls_u32: fix netns refcount changes in u32_change() powerpc: Update MAINTAINERS for ibmvnic and VAS net: restore alpha order to Ethernet devices in config ...
2022-04-21ALSA: hda/realtek: Add quirk for Clevo NP70PNPTim Crawford1-0/+1
Fixes headset detection on Clevo NP70PNP. Signed-off-by: Tim Crawford <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-21ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDsGongjun Song1-0/+9
Add RaptorLake-P PCI IDs Reviewed-by: Kai Vehmanen <[email protected]> Signed-off-by: Gongjun Song <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-21jbd2: fix a potential race while discarding reserved buffers after an abortYe Bin1-1/+3
we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e0974575, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-04-21thermal: int340x: Fix attr.show callback prototypeKees Cook1-2/+2
Control Flow Integrity (CFI) instrumentation of the kernel noticed that the caller, dev_attr_show(), and the callback, odvp_show(), did not have matching function prototypes, which would cause a CFI exception to be raised. Correct the prototype by using struct device_attribute instead of struct kobj_attribute. Reported-and-tested-by: Joao Moreira <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables") Cc: 5.8+ <[email protected]> # 5.8+ Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-04-21Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"Ville Syrjälä1-5/+0
This reverts commit bfe55a1f7fd6bfede16078bf04c6250fbca11588. This was presumably misdiagnosed as an inability to use C3 at all when I suspect the real problem is just misconfiguration of C3 vs. ARB_DIS. Signed-off-by: Ville Syrjälä <[email protected]> Cc: 5.16+ <[email protected]> # 5.16+ Tested-by: Woody Suwalski <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-04-21ACPI: processor: idle: Avoid falling back to C3 type C-statesVille Syrjälä1-1/+2
The "safe state" index is used by acpi_idle_enter_bm() to avoid entering a C-state that may require bus mastering to be disabled on entry in the cases when this is not going to happen. For this reason, it should not be set to point to C3 type of C-states, because they may require bus mastering to be disabled on entry in principle. This was broken by commit d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") which inadvertently allowed the "safe state" index to point to C3 type of C-states. This results in a machine that won't boot past the point when it first enters C3. Restore the correct behaviour (either demote to C1/C2, or use C3 but also set ARB_DIS=1). I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine. Fixes: d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") Cc: 5.16+ <[email protected]> # 5.16+ Signed-off-by: Ville Syrjälä <[email protected]> Tested-by: Woody Suwalski <[email protected]> [ rjw: Subject and changelog adjustments ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-04-21usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()Vijayavardhan Vennapusa1-0/+2
If any function like UVC is deactivating gadget as part of composition switch which results in not calling pullup enablement, it is not getting enabled after switch to new composition due to this deactivation flag not cleared. This results in USB enumeration not happening after switch to new USB composition. Hence clear deactivation flag inside gadget structure in configfs_composite_unbind() before switch to new USB composition. Signed-off-by: Vijayavardhan Vennapusa <[email protected]> Signed-off-by: Dan Vacura <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: misc: eud: Fix an error handling path in eud_probe()Christophe JAILLET1-5/+5
It is odd to call devm_add_action_or_reset() before calling the function that should be undone. Either, the "_or_reset" part should be omitted, or the action should be recorded after the resources have been allocated. Switch the order of devm_add_action_or_reset() and usb_role_switch_get(). Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/362908699275ecec078381b42d87c817c6965fc6.1648979948.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: core: Don't hold the device lock while sleeping in do_proc_control()Tasos Sahanidis1-5/+9
Since commit ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") if a device has the USB_QUIRK_DELAY_CTRL_MSG quirk set, it will temporarily block all other URBs (e.g. interrupts) while sleeping due to a control. This results in noticeable delays when, for example, a userspace usbfs application is sending URB interrupts at a high rate to a keyboard and simultaneously updates the lock indicators using controls. Interrupts with direction set to IN are also affected by this, meaning that delivery of HID reports (containing scancodes) to the usbfs application is delayed as well. This patch fixes the regression by calling msleep() while the device mutex is unlocked, as was the case originally with usb_control_msg(). Fixes: ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Tasos Sahanidis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUsMingwei Zhang1-3/+6
Use clflush_cache_range() to flush the confidential memory when SME_COHERENT is supported in AMD CPU. Cache flush is still needed since SME_COHERENT only support cache invalidation at CPU side. All confidential cache lines are still incoherent with DMA devices. Cc: [email protected] Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SVM: Simplify and harden helper to flush SEV guest page(s)Sean Christopherson1-34/+20
Rework sev_flush_guest_memory() to explicitly handle only a single page, and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page flushing is currently used only to flush the VMSA, and in its current form, the helper is completely broken with respect to flushing actual guest memory, i.e. won't work correctly for an arbitrary memory range. VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page walks, i.e. will fault if the address is not present in the host page tables or does not have the correct permissions. Current AMD CPUs also do not honor SMAP overrides (undocumented in kernel versions of the APM), so passing in a userspace address is completely out of the question. In other words, KVM would need to manually walk the host page tables to get the pfn, ensure the pfn is stable, and then use the direct map to invoke VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is particularly evil/clever and backs the guest with Secret Memory (which unmaps memory from the direct map). Signed-off-by: Sean Christopherson <[email protected]> Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reported-by: Mingwei Zhang <[email protected]> Cc: [email protected] Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: selftests: Silence compiler warning in the kvm_page_table_testThomas Huth1-1/+1
When compiling kvm_page_table_test.c, I get this compiler warning with gcc 11.2: kvm_page_table_test.c: In function 'pre_init_before_test': ../../../../tools/include/linux/kernel.h:44:24: warning: comparison of distinct pointer types lacks a cast 44 | (void) (&_max1 == &_max2); \ | ^~ kvm_page_table_test.c:281:21: note: in expansion of macro 'max' 281 | alignment = max(0x100000, alignment); | ^~~ Fix it by adjusting the type of the absolute value. Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdogLike Xu3-6/+12
NMI-watchdog is one of the favorite features of kernel developers, but it does not work in AMD guest even with vPMU enabled and worse, the system misrepresents this capability via /proc. This is a PMC emulation error. KVM does not pass the latest valid value to perf_event in time when guest NMI-watchdog is running, thus the perf_event corresponding to the watchdog counter will enter the old state at some point after the first guest NMI injection, forcing the hardware register PMC0 to be constantly written to 0x800000000001. Meanwhile, the running counter should accurately reflect its new value based on the latest coordinated pmc->counter (from vPMC's point of view) rather than the value written directly by the guest. Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr") Reported-by: Dongli Cao <[email protected]> Signed-off-by: Like Xu <[email protected]> Reviewed-by: Yanan Wang <[email protected]> Tested-by: Yanan Wang <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resumeWanpeng Li1-0/+13
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SPDX style and spelling fixesTom Rix3-4/+4
SPDX comments use use /* */ style comments in headers anad // style comments in .c files. Also fix two spelling mistakes. Signed-off-by: Tom Rix <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabledSean Christopherson1-0/+3
Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is disabled at the module level to avoid having to acquire the mutex and potentially process all vCPUs. The DISABLE inhibit will (barring bugs) never be lifted, so piling on more inhibits is unnecessary. Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active") Cc: Maxim Levitsky <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a raceSean Christopherson1-1/+14
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check. Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit. WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Modules linked in: CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014 RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Call Trace: <TASK> vcpu_run arch/x86/kvm/x86.c:10039 [inline] kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234 kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG. r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async) r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0) Reported-by: Gaoning Pan <[email protected]> Reported-by: Yongkang Jia <[email protected]> Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation") Cc: [email protected] Cc: Maxim Levitsky <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: nVMX: Defer APICv updates while L2 is active until L1 is activeSean Christopherson3-0/+11
Defer APICv updates that occur while L2 is active until nested VM-Exit, i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1 is active and (a) stomps all over vmcs02 and (b) neglects to ever updated vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv becomes unhibited while L2 is active, KVM will set various APICv controls in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless running with nested_early_check=1, KVM blames L1 and chaos ensues. In all cases, ignoring vmcs02 and always deferring the inhibition change to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE inhibitions cannot truly change while L2 is active (see below). IRQ_BLOCKING can change, but it is firmly a best effort debug feature. Furthermore, only L2's APIC is accelerated/virtualized to the full extent possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR interception will apply to the virtual APIC managed by KVM. The exception is the SELF_IPI register when x2APIC is enabled, but that's an acceptable hole. Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the MSRs to L2, but for that to work in any sane capacity, L1 would need to pass through IRQs to L2 as well, and IRQs must be intercepted to enable virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling VID for L2 are, for all intents and purposes, mutually exclusive. Lack of dynamic toggling is also why this scenario is all but impossible to encounter in KVM's current form. But a future patch will pend an APICv update request _during_ vCPU creation to plug a race where a vCPU that's being created doesn't get included in the "all vCPUs request" because it's not yet visible to other vCPUs. If userspaces restores L2 after VM creation (hello, KVM selftests), the first KVM_RUN will occur while L2 is active and thus service the APICv update request made during VM creation. Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabledSean Christopherson1-1/+1
Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via module param. A recent refactoring to add a wrapper for setting/clearing inhibits unintentionally changed the flag, probably due to a copy+paste goof. Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status") Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: Initialize debugfs_dentry when a VM is created to avoid NULL derefSean Christopherson1-6/+6
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM is created. KVM's teardown when VM creation fails is kludgy and calls kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__dentry_path+0x7b/0x130 Call Trace: <TASK> dentry_path_raw+0x42/0x70 kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm] kvm_put_kvm+0x63/0x2b0 [kvm] kvm_dev_ioctl+0x43a/0x920 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Modules linked in: kvm_intel kvm irqbypass Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory") Cc: [email protected] Cc: Marc Zyngier <[email protected]> Cc: Oliver Upton <[email protected]> Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abusedSean Christopherson11-50/+71
Add wrappers to acquire/release KVM's SRCU lock when stashing the index in vcpu->src_idx, along with rudimentary detection of illegal usage, e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the SRCU index is (currently) either 0 or 1, illegal nesting bugs can go unnoticed for quite some time and only cause problems when the nested lock happens to get a different index. Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will likely yell so loudly that it will bring the kernel to its knees. Signed-off-by: Sean Christopherson <[email protected]> Tested-by: Fabiano Rosas <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copySean Christopherson3-13/+10
Use the generic kvm_vcpu's srcu_idx instead of using an indentical field in RISC-V's version of kvm_vcpu_arch. Generic KVM very intentionally does not touch vcpu->srcu_idx, i.e. there's zero chance of running afoul of common code. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()Sean Christopherson1-6/+1
Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively leak a lock and hang if/when synchronize_srcu() is invoked for the relevant grace period. Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21usb: dwc3: Try usb-role-switch first in dwc3_drd_initSven Peter1-6/+5
If the PHY controller node has a "port" dwc3 tries to find an extcon device even when "usb-role-switch" is present. This happens because dwc3_get_extcon() sees that "port" node and then calls extcon_find_edev_by_node() which will always return EPROBE_DEFER in that case. On the other hand, even if an extcon was present and dwc3_get_extcon() was successful it would still be ignored in favor of "usb-role-switch". Let's just first check if "usb-role-switch" is configured in the device tree and directly use it instead and only try to look for an extcon device otherwise. Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.") Cc: stable <[email protected]> Signed-off-by: Sven Peter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: dwc3: core: Fix tx/rx threshold settingsThinh Nguyen1-4/+4
The current driver logic checks against 0 to determine whether the periodic tx/rx threshold settings are set, but we may get bogus values from uninitialized variables if no device property is set. Properly default these variables to 0. Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config") Cc: <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: mtu3: fix USB 3.0 dual-role-switch from device to hostMacpaul Lin1-4/+2
Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot. Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: [email protected] Tested-by: Fabien Parent <[email protected]> Reviewed-by: Chunfeng Yun <[email protected]> Signed-off-by: Macpaul Lin <[email protected]> Signed-off-by: Tainping Fang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21xhci: Enable runtime PM on second Alderlake controllerEvan Green1-1/+3
Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We had previously added the quirk to default enable runtime PM for 0x461e, now add it for 0x51ed as well. Signed-off-by: Evan Green <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: dwc3: fix backwards compat with rockchip devicesPeter Geis1-0/+23
Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from the clk_bulk api to individual clocks, following the snps,dwc3.yaml dt-binding for clock names. Unfortunately the rk3328 (and upcoming rk356x support) use the rockchip,dwc3.yaml which has different clock names, which are common on devices using the glue layer. The rk3328 does not use a glue layer, but attaches directly to the dwc3 core driver. The offending patch series failed to account for this, thus dwc3 was broken on rk3328. To retain backwards compatibility with rk3328 device trees we must also check for the alternate clock names. Fixes: 33fb697ec7e5 ("usb: dwc3: Get clocks individually") Reported-by: Frank Wunderlich <[email protected]> Tested-By: Frank Wunderlich <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Acked-by: Sean Anderson <[email protected]> Signed-off-by: Peter Geis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21dt-bindings: usb: samsung,exynos-usb2: add missing required regKrzysztof Kozlowski1-0/+1
"reg" property is required on Samsung S5PV210/Exynos EHCI/OHCI controllers. Fixes: 4bf2283cb208 ("dt-bindings: usb: samsung,exynos-usb2: convert to dtschema") Reviewed-by: Alim Akhtar <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: misc: fix improper handling of refcount in uss720_probe()Hangyu Hua1-2/+1
usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable <[email protected]> Reviewed-by: Dongliang Mu <[email protected]> Signed-off-by: Hangyu Hua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21USB: Fix ehci infinite suspend-resume loop issue in zhaoxinWeitao Wango3-0/+28
In zhaoxin platform, some ehci projects will latch a wakeup signal internal when plug in a device on port during system S0. This wakeup signal will turn on when ehci runtime suspend, which will trigger a system control interrupt that will resume ehci back to D0. As no device connect, ehci will be set to runtime suspend and turn on the internal latched wakeup signal again. It will cause a suspend-resume loop and generate system control interrupt continuously. Fixed this issue by clear wakeup signal latched in ehci internal when ehci resume callback is called. Acked-by: Alan Stern <[email protected]> Signed-off-by: Weitao Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
Fix: drivers/usb/typec/tcpm/tcpm.c: In function ‘run_state_machine’: drivers/usb/typec/tcpm/tcpm.c:4724:3: error: case label does not reduce to an integer constant case BDO_MODE_TESTDATA: ^~~~ See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie1-0/+1
Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property': rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property': rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register': rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register' drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler': rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9': rt1719.c:(.text+0x657): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_attach': rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: 25d29b980912 ("usb: typec: rt1719: Add support for Richtek RT1719") Reported-by: Hulk Robot <[email protected]> Reviewed-by: ChiYuan Huang <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Ren Zhijie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: ucsi: Fix role swappingHeikki Krogerus1-7/+13
All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion. Link: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: [email protected] Reported-and-tested-by: Jia-Ju Bai <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: ucsi: Fix reuse of completion structureHeikki Krogerus1-0/+4
The role swapping completion variable is reused, so it needs to be reinitialised every time. Otherwise it will be marked as done after the first time it's used and completing immediately. Link: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations") Cc: [email protected] Reported-and-suggested-by: Jack Pham <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.