aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14Merge tag 'tty-4.16-rc6' of ↵Linus Torvalds9-5/+42
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty core and serial driver fixes for 4.16-rc6. They resolve some newly reported bugs, as well as some very old ones, which is always nice to see. There is also a new device id added in here for good measure. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: fix bogus dev_err serial: sh-sci: prevent lockup on full TTY buffers serial: 8250_pci: Add Brainboxes UC-260 4 port serial device earlycon: add reg-offset to physical address before mapping serial: core: mark port as initialized in autoconfig serial: 8250_pci: Don't fail on multiport card class tty/serial: atmel: add new version check for usart tty: make n_tty_read() always abort if hangup is in progress
2018-03-14Merge tag 'staging-4.16-rc6' of ↵Linus Torvalds2-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.16-rc6 Two of them are lockdep fixes for the ashmem driver that have been reported by a number of people recently. The last one is a fix for the comedi driver core. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: Fix possible deadlock in ashmem_ioctl staging: comedi: fix comedi_nsamples_left. staging: android: ashmem: Fix lockdep issue during llseek
2018-03-14net: use skb_to_full_sk() in skb_update_prio()Eric Dumazet2-9/+17
Andrei Vagin reported a KASAN: slab-out-of-bounds error in skb_update_prio() Since SYNACK might be attached to a request socket, we need to get back to the listener socket. Since this listener is manipulated without locks, add const qualifiers to sock_cgroup_prioidx() so that the const can also be used in skb_update_prio() Also add the const qualifier to sock_cgroup_classid() for consistency. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Andrei Vagin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linuxLinus Torvalds2-6/+6
Pull auxdisplay fixes from Miguel Ojeda: "Silence a few warnings in auxdisplay. - a couple of uninitialized warnings reported by the build service - a doc comment warning under W=1 - three fall-through comments not recognized under W=1" * tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux: auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings auxdisplay: panel: Change comments to silence fallthrough warnings
2018-03-14jump_label: Fix sparc64 warningJosh Poimboeuf1-1/+2
The kbuild test robot reported the following warning on sparc64: kernel/jump_label.c: In function '__jump_label_update': kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code); On sparc64, the jump_label entry->code field is of type u32, but pointers are 64-bit. Silence the warning by casting entry->code to an unsigned long before casting it to a pointer. This is also what the sparc jump label code does. Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Jason Baron <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "David S . Miller" <[email protected]> Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
2018-03-14libata: Enable queued TRIM for Samsung SSD 860Ju Hyung Park1-1/+3
Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by: Park Ju Hyung <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected]
2018-03-14x86/speculation, objtool: Annotate indirect calls/jumps for objtool on ↵Andy Whitcroft1-1/+4
32-bit kernels In the following commit: 9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by: Andy Whitcroft <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David Woodhouse <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14can: cc770: Fix queue stall & dropped RTR replyAndri Yngvason2-28/+68
While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by: Andri Yngvason <[email protected]> Tested-by: Richard Weinberger <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-14can: cc770: Fix stalls on rt-linux, remove redundant IRQ ackAndri Yngvason1-15/+0
This has been reported to cause stalls on rt-linux. Suggested-by: Richard Weinberger <[email protected]> Tested-by: Richard Weinberger <[email protected]> Signed-off-by: Andri Yngvason <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-14x86/vm86/32: Fix POPF emulationAndy Lutomirski1-1/+2
POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by: Stas Sergeev <[email protected]> Reported-by: Bart Oldeman <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14selftests/x86/entry_from_vm86: Add test cases for POPFAndy Lutomirski1-3/+27
POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by: Bart Oldeman <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stas Sergeev <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-14selftests/x86/entry_from_vm86: Exit with 1 if we failAndy Lutomirski1-1/+1
Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stas Sergeev <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-03-13libnvdimm: remove redundant assignment to pointer 'dev'Colin Ian King1-1/+1
Pointer dev is being assigned a value that is never read, it is being re-assigned the same value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/nvdimm/pfn_devs.c:307:17: warning: Value stored to 'dev' during its initialization is never read Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Ross Zwisler <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-03-14KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entryPaul Mackerras1-5/+5
This fixes a bug where the trap number that is returned by __kvmppc_vcore_entry gets corrupted. The effect of the corruption is that IPIs get ignored on POWER9 systems when the IPI is sent via a doorbell interrupt to a CPU which is executing in a KVM guest. The effect of the IPI being ignored is often that another CPU locks up inside smp_call_function_many() (and if that CPU is holding a spinlock, other CPUs then lock up inside raw_spin_lock()). The trap number is currently held in register r12 for most of the assembly-language part of the guest exit path. In that path, we call kvmppc_subcore_exit_guest(), which is a C function, without restoring r12 afterwards. Depending on the kernel config and the compiler, it may modify r12 or it may not, so some config/compiler combinations see the bug and others don't. To fix this, we arrange for the trap number to be stored on the stack from the 'guest_bypass:' label until the end of the function, then the trap number is loaded and returned in r12 as before. Cc: [email protected] # v4.8+ Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt") Signed-off-by: Paul Mackerras <[email protected]>
2018-03-13workqueue: remove unused cancel_work()Stephen Hemminger2-9/+0
Found this by accident. There are no usages of bare cancel_work() in current kernel source. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2018-03-13IB/mlx5: Fix integer overflows in mlx5_ib_create_srqBoris Pismenny2-8/+11
This patch validates user provided input to prevent integer overflow due to integer manipulation in the mlx5_ib_create_srq function. Cc: syzkaller <[email protected]> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-13IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rqBoris Pismenny1-7/+16
Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <[email protected]> Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-13workqueue: use put_device() instead of kfree()Arvind Yadav1-1/+1
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized in this function instead. Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2018-03-13dm mpath: eliminate need to use scsi_device_from_queueMike Snitzer1-9/+8
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name() -- whose implementation uses scsi_device_from_queue() to avoid trying to access SCSI-specific resources from non-SCSI devices. Fixes buildbot reported issue when CONFIG_SCSI isn't set: ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined! Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Signed-off-by: Mike Snitzer <[email protected]>
2018-03-13dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointerMike Snitzer1-11/+10
Initialize all the scsi_dh related 'struct multipath' members regardless of whether a scsi_dh is in use or not. The subtle (and fragile) SCSI-assuming legacy code clearly needs further decoupling from non-SCSI (and/or developer understanding). Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Reported-by: Bart Van Assche <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2018-03-13auxdisplay: img-ascii-lcd: Silence 2 uninitialized warningsMiguel Ojeda1-2/+2
The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <[email protected]> Cc: Paul Burton <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13auxdisplay: img-ascii-lcd: Fix doc comment to silence warningsMiguel Ojeda1-1/+1
Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13auxdisplay: panel: Change comments to silence fallthrough warningsMiguel Ojeda1-3/+3
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13usb: musb: Fix external abort in musb_remove on omap2430Merlijn Wajer1-1/+1
This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by: Merlijn Wajer <[email protected]> Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-13qed: Use after free in qed_rdma_free()Dan Carpenter1-1/+1
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line before in qed_rdma_resc_free(p_hwfn). Fixes: 9de506a547c0 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Michal Kalderon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-13Merge branch 'master' of ↵David S. Miller13-33/+56
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-13 1) Refuse to insert 32 bit userspace socket policies on 64 bit systems like we do it for standard policies. We don't have a compat layer, so inserting socket policies from 32 bit userspace will lead to a broken configuration. 2) Make the policy hold queue work without the flowcache. Dummy bundles are not chached anymore, so we need to generate a new one on each lookup as long as the SAs are not yet in place. 3) Fix the validation of the esn replay attribute. The The sanity check in verify_replay() is bypassed if the XFRM_STATE_ESN flag is not set. Fix this by doing the sanity check uncoditionally. From Florian Westphal. 4) After most of the dst_entry garbage collection code is removed, we may leak xfrm_dst entries as they are neither cached nor tracked somewhere. Fix this by reusing the 'uncached_list' to track xfrm_dst entries too. From Xin Long. 5) Fix a rcu_read_lock/rcu_read_unlock imbalance in xfrm_get_tos() From Xin Long. 6) Fix an infinite loop in xfrm_get_dst_nexthop. On transport mode we fetch the child dst_entry after we continue, so this pointer is never updated. Fix this by fetching it before we continue. 7) Fix ESN sequence number gap after IPsec GSO packets. We accidentally increment the sequence number counter on the xfrm_state by one packet too much in the ESN case. Fix this by setting the sequence number to the correct value. 8) Reset the ethernet protocol after decapsulation only if a mac header was set. Otherwise it breaks configurations with TUN devices. From Yossi Kuperman. 9) Fix __this_cpu_read() usage in preemptible code. Use this_cpu_read() instead in ipcomp_alloc_tfms(). From Greg Hackmann. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-13efi/libstub/tpm: Initialize pointer variables to zero for mixed modeArd Biesheuvel1-2/+2
As reported by Jeremy Cline, running the new TPM libstub code in mixed mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking the TCG2 protocol, or when accessing the log_tbl pool allocation. The reason turns out to be that in both cases, the 64-bit pointer variables are not fully initialized by the 32-bit EFI code, and so we should take care to zero initialize these variables beforehand, or we'll end up dereferencing bogus pointers. Reported-by: Jeremy Cline <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-13net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()Greg Hackmann1-1/+1
f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a __this_cpu_read() call inside ipcomp_alloc_tfms(). At the time, __this_cpu_read() required the caller to either not care about races or to handle preemption/interrupt issues. 3.15 tightened the rules around some per-cpu operations, and now __this_cpu_read() should never be used in a preemptible context. On 3.15 and later, we need to use this_cpu_read() instead. syzkaller reported this leading to the following kernel BUG while fuzzing sendmsg: BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101 caller is ipcomp_init_state+0x185/0x990 CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0xb9/0x115 check_preemption_disabled+0x1cb/0x1f0 ipcomp_init_state+0x185/0x990 ? __xfrm_init_state+0x876/0xc20 ? lock_downgrade+0x5e0/0x5e0 ipcomp4_init_state+0xaa/0x7c0 __xfrm_init_state+0x3eb/0xc20 xfrm_init_state+0x19/0x60 pfkey_add+0x20df/0x36f0 ? pfkey_broadcast+0x3dd/0x600 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_seq_stop+0x80/0x80 ? __skb_clone+0x236/0x750 ? kmem_cache_alloc+0x1f6/0x260 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_process+0x62a/0x6f0 pfkey_process+0x62a/0x6f0 ? pfkey_send_new_mapping+0x11c0/0x11c0 ? mutex_lock_io_nested+0x1390/0x1390 pfkey_sendmsg+0x383/0x750 ? dump_sp+0x430/0x430 sock_sendmsg+0xc0/0x100 ___sys_sendmsg+0x6c8/0x8b0 ? copy_msghdr_from_user+0x3b0/0x3b0 ? pagevec_lru_move_fn+0x144/0x1f0 ? find_held_lock+0x32/0x1c0 ? do_huge_pmd_anonymous_page+0xc43/0x11e0 ? lock_downgrade+0x5e0/0x5e0 ? get_kernel_page+0xb0/0xb0 ? _raw_spin_unlock+0x29/0x40 ? do_huge_pmd_anonymous_page+0x400/0x11e0 ? __handle_mm_fault+0x553/0x2460 ? __fget_light+0x163/0x1f0 ? __sys_sendmsg+0xc7/0x170 __sys_sendmsg+0xc7/0x170 ? SyS_shutdown+0x1a0/0x1a0 ? __do_page_fault+0x5a0/0xca0 ? lock_downgrade+0x5e0/0x5e0 SyS_sendmsg+0x27/0x40 ? __sys_sendmsg+0x170/0x170 do_syscall_64+0x19f/0x640 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f0ee73dfb79 RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79 RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004 RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0 R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440 R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Greg Hackmann <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2018-03-12scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe DiscoveryHimanshu Madhani1-1/+0
Commit 7d64c39e64310 fixed regression of FCP discovery when Nport Handle is in-use and relogin is triggered. However, during FCP and FC-NVMe discovery this resulted into only discovering NVMe LUNs. This patch fixes issue where FCP and FC-NVMe protocol is used on same port where assigning FC_NO_LOOP_ID will result into discovery failure for FCP LUNs. Fixes: a084fd68e1d26 ("scsi: qla2xxx: Fix re-login for Nport Handle in use") Signed-off-by: Himanshu Madhani <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2018-03-12scsi: libsas: defer ata device eh commands to libataJason Yan1-20/+13
When ata device doing EH, some commands still attached with tasks are not passed to libata when abort failed or recover failed, so libata did not handle these commands. After these commands done, sas task is freed, but ata qc is not freed. This will cause ata qc leak and trigger a warning like below: WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037 ata_eh_finish+0xb4/0xcc CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G W OE 4.14.0#1 ...... Call trace: [<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc [<ffff0000088b8420>] ata_do_eh+0xc4/0xd8 [<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c [<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694 [<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80 [<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170 [<ffff0000080ebd70>] process_one_work+0x144/0x390 [<ffff0000080ec100>] worker_thread+0x144/0x418 [<ffff0000080f2c98>] kthread+0x10c/0x138 [<ffff0000080855dc>] ret_from_fork+0x10/0x18 If ata qc leaked too many, ata tag allocation will fail and io blocked for ever. As suggested by Dan Williams, defer ata device commands to libata and merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle ata qcs correctly after this. Signed-off-by: Jason Yan <[email protected]> CC: Xiaofei Tan <[email protected]> CC: John Garry <[email protected]> CC: Dan Williams <[email protected]> Reviewed-by: Dan Williams <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2018-03-12net: dsa: Fix dsa_is_user_port() test inversionFlorian Fainelli1-1/+1
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-12clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()Wei Yongjun1-3/+2
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 81ac38847a1d ("clk: qcom: Add APCS clock controller support") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12clk: hisilicon: hi3660：Fix potential NULL dereference in ↵Wei Yongjun1-0/+2
hi3660_stub_clk_probe() platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 4f16f7ff3bc0 ("clk: hisilicon: Add support for Hi3660 stub clocks") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12Merge branch 'clk-helpers' (early part) into clk-fixesStephen Boyd1-1/+3
* 'clk-helpers' (early part): clk: fix determine rate error with pass-through clock
2018-03-12clk: fix determine rate error with pass-through clockJerome Brunet1-1/+3
If we try to determine the rate of a pass-through clock (a clock which does not implement .round_rate() nor .determine_rate()), clk_core_round_rate_nolock() will directly forward the call to the parent clock. In the particular case where the pass-through actually does not have a parent, clk_core_round_rate_nolock() will directly return 0 with the requested rate still set to the initial request structure. This is interpreted as if the rate could be exactly achieved while it actually cannot be adjusted. This become a real problem when this particular pass-through clock is the parent of a mux with the flag CLK_SET_RATE_PARENT set. The pass-through clock will always report an exact match, get picked and finally error when the rate is actually getting set. This is fixed by setting the rate inside the req to 0 when core is NULL in clk_core_round_rate_nolock() (same as in __clk_determine_rate() when hw is NULL) Fixes: 0f6cc2b8e94d ("clk: rework calls to round and determine rate callbacks") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Michael Turquette <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12Merge branch 'clk-phase' into clk-fixesStephen Boyd1-1/+4
* clk-phase: clk: update cached phase to respect the fact when setting phase
2018-03-12Merge tag 'ti-clk-fixes-4.16' of https://github.com/t-kristo/linux-pm into ↵Stephen Boyd3-2/+4
clk-fixes Pull TI SoC clock fixes for 4.16 from Tero Kristo: * tag 'ti-clk-fixes-4.16' of https://github.com/t-kristo/linux-pm: clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-03-12Merge tag 'clk-imx-fixes-4.16' of ↵Stephen Boyd1-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes Pull i.MX clock fixes for 4.16 from Shawn Guo: - Update i.MX5 clock driver to register UART4/5 clock only on i.MX50 and i.MX53. It fixes a kernel warning seen on i.MX53, caused by commit 59dc3d8c8673 ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53"). * tag 'clk-imx-fixes-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
2018-03-12Merge tag 'sunxi-clk-fixes-for-4.16' of ↵Stephen Boyd1-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clock fixes for 4.16 from Chen-Yu Tsai: A critical fix for the A31 sunxi-ng clock driver. The CLK_OUT clocks had definitions paired with the incorrect type of clk ops. This results in a serious oops starting with commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks"), which exposed the incorrect clk ops when it added a new field to the data structures, which then nudged the underlying (compatible but incorrect) data structures out of alignment. * tag 'sunxi-clk-fixes-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
2018-03-12Merge branch '1GbE' of ↵David S. Miller3-40/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-12 This series contains fixes to e1000e only. Benjamin Poirier provides two fixes, first reverts commits that changed what happens to the link status when there is an error. These commits were to resolve a race condition, but in the process of fixing the race condition, they changed the behavior when an error occurred. Second fix resolves a race condition by not setting "get_link_status" to false after checking the link. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-12Merge branch 'l2tp-fix-races-with-ipv4-mapped-ipv6-addresses'David S. Miller3-30/+32
Paolo Abeni says: ==================== l2tp: fix races with ipv4-mapped ipv6 addresses The syzbot reported an l2tp oops that uncovered some races in the l2tp xmit path and a partially related issue in the generic ipv6 code. We need to address them separately. v1 -> v2: - add missing fixes tag in patch 1 - fix several issues in patch 2 v2 -> v3: - dropped some unneeded chunks in patch 2 ==================== Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-12l2tp: fix races with ipv4-mapped ipv6 addressesPaolo Abeni2-23/+18
The l2tp_tunnel_create() function checks for v4mapped ipv6 sockets and cache that flag, so that l2tp core code can reusing it at xmit time. If the socket is provided by the userspace, the connection status of the tunnel sockets can change between the tunnel creation and the xmit call, so that syzbot is able to trigger the following splat: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192 [inline] BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448 CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 ip6_dst_idev include/net/ip6_fib.h:192 [inline] ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline] l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148 pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046 __sys_sendmsg+0xe5/0x210 net/socket.c:2080 SYSC_sendmsg net/socket.c:2091 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2087 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x453e69 RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69 RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000 This change addresses the issues: * explicitly checking for TCP_ESTABLISHED for user space provided sockets * dropping the v4mapped flag usage - it can become outdated - and explicitly invoking ipv6_addr_v4mapped() instead The issue is apparently there since ancient times. v1 -> v2: (many thanks to Guillaume) - with csum issue introduced in v1 - replace pr_err with pr_debug - fix build issue with IPV6 disabled - move l2tp_sk_is_v4mapped in l2tp_core.c v2 -> v3: - don't update inet_daddr for v4mapped address, unneeded - drop rendundant check at creation time Reported-and-tested-by: [email protected] Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-12net: ipv6: keep sk status consistent after datagram connect failurePaolo Abeni1-7/+14
On unsuccesful ip6_datagram_connect(), if the failure is caused by ip6_datagram_dst_update(), the sk peer information are cleared, but the sk->sk_state is preserved. If the socket was already in an established status, the overall sk status is inconsistent and fouls later checks in datagram code. Fix this saving the old peer information and restoring them in case of failure. This also aligns ipv6 datagram connect() behavior with ipv4. v1 -> v2: - added missing Fixes tag Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-12e1000e: Fix link check race conditionBenjamin Poirier2-21/+24
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Acked-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-12Revert "e1000e: Separate signaling for link check/link up"Benjamin Poirier3-19/+9
This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <[email protected]> Acked-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-12drm/i915: Kick the rps worker when changing the boost frequencyChris Wilson1-2/+8
The boost frequency is only applied from the RPS worker while someone is waiting on a request and requested a boost. As such, when the user wishes to change the frequency, we have to kick the worker in order to re-evaluate whether to apply the boost frequency. v2: Check num_waiters to decide if we should kick the worker to handle boosting. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 59cd31f177b34deb834a5c97478502741be1cf2e) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12drm/i915: Only prune fences after wait-for-allChris Wilson1-4/+12
Currently, we only allow ourselves to prune the fences so long as all the waits completed (i.e. all the fences we checked were signaled), and that the reservation snapshot did not change across the wait. However, if we only waited for a subset of the reservation object, i.e. just waiting for the last writer to complete as opposed to all readers as well, then we would erroneously conclude we could prune the fences as indeed although all of our waits were successful, they did not represent the totality of the reservation object. v2: We only need to check the shared fences due to construction (i.e. all of the shared fences will be later than the exclusive fence, if any). Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait") Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit fa73055b8442c97b3ba7cd0aa57cd2ad32124201) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12drm/i915: Enable VBT based BL control for DPMustamin B Mustaffa1-7/+3
Currently, BXT_PP is hardcoded with value '0'. It practically disabled eDP backlight on MRB (BXT) platform. This patch will tell which BXT_PP registers (there are two set of PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing table) and this will enabled eDP backlight controller on MRB (BXT) platform. v2: - Remove unnecessary information in commit message. - Assign vbt.backlight.controller to a backlight_controller variable and return the variable value. v3: - Rebased to latest code base. - updated commit title. Signed-off-by: Mustamin B Mustaffa <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 73c0fcac97bf7f4a6a61b825b205d1cf127cfca7) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12clk: migrate the count of orphaned clocks at initJerome Brunet1-16/+21
The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Dong Aisheng <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Signed-off-by: Michael Turquette <[email protected]>
2018-03-12Merge tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds3-44/+54
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include the following stable fixes: - NFS: Fix an incorrect type in struct nfs_direct_req - pNFS: Prevent the layout header refcount going to zero in pnfs_roc() - NFS: Fix unstable write completion" * tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix unstable write completion pNFS: Prevent the layout header refcount going to zero in pnfs_roc() NFS: Fix an incorrect type in struct nfs_direct_req
Powered by cgit, Gruvboxed by Blaster4385.