aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-18Merge tag 'omap-for-v4.10/fixes-rc4' of ↵Olof Johansson8-20/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for omap1, and then a handful of trivial fixes for boards and devices to work: - Fixes TI wilink bluetooth strange platform data baud rate - Remove duplicate pinmux line for am335x-icev2 - Fix omap1 dma regression - Fix uninitialized return value for wkup_m3_ipc_probe() - Fix Ethernet PHY binding typo for dra72-evm - Fix init for omap5 and dra7 sata ports - Fix mmc card detect pin for Logic PD SOM-LV * tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe() ARM: OMAP1: DMA: Correct the number of logical channels ARM: dts: am335x-icev2: Remove the duplicated pinmux setting ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate Signed-off-by: Olof Johansson <[email protected]>
2017-01-17ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LVAdam Ford1-8/+3
This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect pins were improperly configured. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-01-17ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFSNeil Armstrong2-1/+5
The current hardware is not able to run with all cores enabled at a cluster frequency superior at 1536MHz. But the currently shipped u-boot for the platform still reports an OPP table with possible DVFS frequency up to 2GHz, and will not change since the off-tree linux tree supports limiting the OPPs with a kernel parameter. A recent u-boot change reports the boot-time DVFS around 100MHz and the default performance cpufreq governor sets the maximum frequency. Previous version of u-boot reported to be already at the max OPP and left the OPP as is. Nevertheless, other governors like ondemand could setup the max frequency and make the system crash. This patch disables the DVFS clock and disables cpufreq. Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'ux500-fix-for-armsoc' of ↵Olof Johansson1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes A single PM fix from Arnd * tag 'ux500-fix-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'arm-soc/for-4.10/devicetree-fixes' of ↵Olof Johansson1-1/+1
http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for v4.10, please pull the following: - Jon fixes an invalid value for the "ranges" property of the bus nodes on NorthStar Plus SoCs * tag 'arm-soc/for-4.10/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: NSP: Fix DT ranges error Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'arm-soc/for-4.10/defconfig-fixes' of ↵Olof Johansson1-2/+2
http://github.com/Broadcom/stblinux into fixes This pull request contains fixes to multi_v7_defconfig for Broadcom ARM-based SoCs, please pull the following changes: - Valenting fixes two incorrect Kconfig symbols for BCM47xx: NVRAM and watchdog drivers * tag 'arm-soc/for-4.10/defconfig-fixes' of http://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: set bcm47xx watchdog ARM: multi_v7_defconfig: fix config typo Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'samsung-fixes-4.10' of ↵Olof Johansson2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Samsung fixes for v4.10: 1. Update maintainers entry with Patchwork address. 2. Fix invalid values for NF_CT_PROTO_* in s3c2410 defconfig (these options cannot be modules anymore). * tag 'samsung-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_* MAINTAINERS: Add Patchwork URL to Samsung Exynos entry Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'sunxi-fixes-for-4.10' of ↵Olof Johansson4-1/+7
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.10 A few fixes here and there to enable the build of some DT leftover, prevent display issues or setup a proper muxing. * tag 'sunxi-fixes-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc ARM: dts: sun8i: Support DTB build for NanoPi M1 ARM: dts: sun6i: hummingbird: Enable display engine again ARM: dts: sun6i: Disable display pipeline by default Signed-off-by: Olof Johansson <[email protected]>
2017-01-16Merge tag 'imx-fixes-4.10-2' of ↵Olof Johansson2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.10, 2nd round: - A couple of Nitrogen6 device tree fixes for audio codec probe failure, which is caused by that pinctrl setting for codec clock was not in the correct device node. * tag 'imx-fixes-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init Signed-off-by: Olof Johansson <[email protected]>
2017-01-13ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.Jean-Jacques Hiblot2-0/+2
AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: <[email protected]> # v4.6+ Signed-off-by: Jean-Jacques Hiblot <[email protected]> Acked-by: Roger Quadros <[email protected]> [[email protected]: updated comments with what goes wrong] Signed-off-by: Tony Lindgren <[email protected]>
2017-01-12ARM: dts: NSP: Fix DT ranges errorJon Mason1-1/+1
The range size for axi is 0x2 bytes too small, as the QSPI needs 0x11c408 + 0x004 (which is 0x0011c40c, not 0x0011c40a). No errors have been observed with this shortcoming, but fixing it for correctness. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2017-01-12ARM: multi_v7_defconfig: set bcm47xx watchdogValentin Rothberg1-1/+1
Correct the bcm47xx watchdog option. The convention of bcm watchdogs is the _WDT suffix. Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2017-01-12ARM: multi_v7_defconfig: fix config typoValentin Rothberg1-1/+1
s/CONFIG_CONFIG_BCM47XX_NVRAM/CONFIG_BCM47XX_NVRAM/ Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2017-01-12ARM: dts: dra72-evm-revc: fix typo in ethernet-phy nodeSekhar Nori1-1/+1
Fix a typo in impedance setting for ethernet-phy@3 Fixes: b76db38cd8ae ("ARM: dts: dra72-evm-revc: add phy impedance settings") Cc: Mugunthan V N <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-01-12soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the kthread_run() error handling case instead of 0, as done elsewhere in this function. Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-01-12ARM: ux500: fix prcmu_is_cpu_in_wfi() calculationArnd Bergmann1-2/+2
This function clearly never worked and always returns true, as pointed out by gcc-7: arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi': arch/arm/mach-ux500/pm.c:137:212: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] With the added braces, the condition actually makes sense. Fixes: 34fe6f107eab ("mfd : Check if the other db8500 core is in WFI") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-01-10ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmcEmmanuel Vadot1-1/+1
The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one. This makes the original node (mmc2_pins_a) scrapped out of the dtb and result in a unusable eMMC if U-Boot didn't configured the pins to the correct functions. Signed-off-by: Emmanuel Vadot <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2017-01-10ARM: dts: sun8i: Support DTB build for NanoPi M1Milo Kim1-0/+1
The commit 10efbf5f1633 ("ARM: dts: sun8i: Add dts file for NanoPi M1 SBC") introduced NanoPi M1 board but it's missing in Allwinner H3 DTB build. Signed-off-by: Milo Kim <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2017-01-10ARM: dts: sun6i: hummingbird: Enable display engine againChen-Yu Tsai1-0/+4
Now that we disable the display engine by default, we need to re-enable it for the Hummingbird A31, which already had its display pipeline enabled. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2017-01-10ARM: dts: sun6i: Disable display pipeline by defaultChen-Yu Tsai1-0/+1
While we now support the internal display pipeline found on sun6i, it is possible that we are unable to enable the display for some boards, due to a lack of drivers for the panels or bridges found on them. If the display pipeline is enabled, the driver will try to enable, and possibly screw up the simple framebuffer U-boot had configured. Disable the display pipeline by default. Fixes: 6d0e5b70be13 ("ARM: dts: sun6i: Add device nodes for first display pipeline") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2017-01-09ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 3Masahiro Yamada2-2/+2
Tree-wide replacement was done by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"), then the 2nd round by commit 15b7cc78f095 ("arm64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 2"). Here, some new users have appeared for Linux v4.10-rc1. Eliminate them now. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2017-01-09Merge tag 'zynmp-dt-fixes-for-4.10' of https://github.com/Xilinx/linux-xlnx ↵Olof Johansson2-4/+4
into fixes arm: Xilinx ZynqMP DT fixes for v4.10 - Fix dtc warnings - Fix i2c compatible string * tag 'zynmp-dt-fixes-for-4.10' of https://github.com/Xilinx/linux-xlnx: ARM64: zynqmp: Fix i2c node's compatible string ARM64: zynqmp: Fix W=1 dtc 1.4 warnings Signed-off-by: Olof Johansson <[email protected]>
2017-01-10ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl initGary Bisson1-2/+2
Since the codec is probed first, the pinctrl node should be under the codec node. The codec init was working for this board since U-Boot was already setting GPIO_0 as CLKO1 but better fix it anyway. Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Signed-off-by: Gary Bisson <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2017-01-10ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl initGary Bisson1-2/+2
This patch fixes the following error: sgtl5000 0-000a: Error reading chip id -6 imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) The problem was that the pinctrl group was linked to the sound driver instead of the codec node. Since the codec is probed first, the sys_mclk was missing and it would therefore fail to initialize. Fixes: b32e700256bc ("ARM: dts: imx: add Boundary Devices Nitrogen6_Max board") Signed-off-by: Gary Bisson <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2017-01-06ARM: OMAP1: DMA: Correct the number of logical channelsPeter Ujfalusi1-9/+7
OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels. OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels available. The wired 17 for the lch_count must have been used to cover the 16 + 1 dedicated LCD channel, in reality we can only use 9 or 16 channels. The d->chan_count is not used by the omap-dma stack, so we can skip the setup. chan_count was configured to the number of logical channels and not the actual number of physical channels anyways. Signed-off-by: Peter Ujfalusi <[email protected]> Acked-by: Aaro Koskinen <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-01-05ARM: dts: am335x-icev2: Remove the duplicated pinmux settingLokesh Vutla1-1/+0
There is no mmc sd card detect on am335x-ice board. But the spi0_cs1 pin being configured as mmcsd_cd. Removing it fixes the below warning during boot: pinctrl-single 44e10800.pinmux: pin 44e10960.0 already requested by 48030000.spi; cannot claim for 48060000.mmc Signed-off-by: Lokesh Vutla <[email protected]> [[email protected]: tidied up commit message] Signed-off-by: Tony Lindgren <[email protected]>
2017-01-05ARM: OMAP2+: Fix WL1283 Bluetooth Baud RateAdam Ford1-1/+1
Commit 485fa1261f78 ("ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth") set the wrong baud rate for the UART. The Baud rate was 300,000 and it should be 3,000,000 for WL1283. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-01-04Merge tag 'davinci-fixes-for-v4.10' of ↵Arnd Bergmann4-27/+53
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes Pull "DaVinci fixes for v4.10" from Sekhar Nori: This pull request contains fixes for the following issues 1) Fix two instances of infinite loop occurring in clock list for DA850. This fixes kernel hangs in some instances and so have been marked for stable kernel. 2) Fix for sleeping function called from atomic context with USB 2.0 clock management code introduced in v4.10 merge window. * tag 'davinci-fixes-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da8xx: Fix sleeping function called from invalid context ARM: davinci: Make __clk_{enable,disable} functions public ARM: davinci: da850: don't add emac clock to lookup table twice ARM: davinci: da850: fix infinite loop in clk_set_rate()
2017-01-04Merge tag 'amlogic-fixes' of ↵Arnd Bergmann9-1/+94
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Pull "Amlogic fixes for v4.10" from Kevin Hilman: - DT: GXL: fix GPIO include - add DT and defconfig for newly merged DRM driver This pull has one real fix, as a couple non-critical ones. The DRM DT/defconfig patches are coming now because I didn't expect the new driver to make it for the v4.10 merge window, but since it did[1], the DT and defconfig should go into the same release. [1] bbbe775ec5b5 drm: Add support for Amlogic Meson Graphic Controller * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: defconfig: enable DRM_MESON as module ARM64: dts: meson-gx: Add Graphic Controller nodes ARM64: dts: meson-gxl: fix GPIO include
2017-01-04Merge tag 'psci-fixes-4.10' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux into fixes Pull "PSCI fixes for v4.10" from Lorenzo Pieralisi: Two minor fixes following the merge of the PSCI checker: - Annotate the PSCI checker timer on the stack used to wake-up from suspend to prevent warnings when the DEBUG_OBJECTS config option is enabled - Extend the PSCI entry in the maintainers list to also include the PSCI checker code * tag 'psci-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux: MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code drivers: psci: annotate timer on stack to silence odebug messages
2017-01-04Merge tag 'juno-fixes-4.10' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes Pull "ARMv8 Juno/VExpress fixes for v4.10" from Sudeep Holla: A simple fix to extend GICv2 CPU interface registers from 4K to 8K on AEMv8 FVP/RTSM models in order to support split priority drop and interrupt deactivation. * tag 'juno-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: vexpress: Support GICC_DIR operations
2017-01-04Merge tag 'vexpress-fixes-4.10' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes Pull "ARMv7 VExpress fixes for v4.10" from Sudeep Holla: A simple fix to extend GICv2 CPU interface registers from 4K to 8K on VExpress TC1 and TC2 platforms in order to support split priority drop and interrupt deactivation. * tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: Support GICC_DIR operations
2017-01-04Merge tag 'scpi-fixes-4.10' of ↵Arnd Bergmann1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes Pull "SCPI fix for v4.10" from Sudeep Holla: A simple fix for reading only lower 32-bit sensor values on pre-1.0 SCPI firmwares so that upper 32-bit (garbage) value is discarded properly. * tag 'scpi-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
2017-01-04Merge tag 'imx-fixes-4.10' of ↵Arnd Bergmann7-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.10" from Shawn Guo: - A format fix for vf610-zii-dev-rev-b.dts, which has a very odd line due to misses a newline. - A fix to imx-weim bus error seen on board which doesn't actually use the bus. - A fix for imx6qdl-nitrogen6x board which has conflicting usage of pad NANDF_CS2. - A cleanup on i.MX1 machine to remove .map_io callback, which also fixes a compiling error for NOMMU build. - Fix AVIC base address in i.MX31 device tree source. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. * tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: Disable "weim" node in the dtsi files ARM: i.MX: remove map_io callback ARM: dts: vf610-zii-dev-rev-b: Add missing newline ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry ARM: dts: imx31: fix AVIC base address
2017-01-04Merge tag 'qcom-arm-fixes-for-4.10-rc2' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Pull "Qualcomm ARM DTS Fixes for v4.10-rc2" from Andy Gross: * Add SCM clock for APQ8064 to fix boot failures * tag 'qcom-arm-fixes-for-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: apq8064: Add missing scm clock
2017-01-04Merge tag 'omap-for-v4.10/fixes-rc1' of ↵Arnd Bergmann26-221/+74
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "omap fixes for v4.10-rc cycle" from Tony Lindgren: Fist set of fixes for omaps for v4.10-rc cycle, mostly to deal with various regressions noticed during the merge window and to fix various device tree configurations for boards. Also included is removal of mach-omap2/gpio.c that is now dead code with device tree based booting that should be OK for the early -rc cycle: - A series of fixes to add empty chosen node to fix regressions caused for bootloaders that don't create chosen node as the decompressor needs the chosen node to merge command line and ATAGs into it - Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile - Fix regression for am437x timers - Fix wrong strcat for non-NULL terminated string - A series of changes to fix tps65217 interrupts to not use defines as we don't do that for interrupts - Two patches to fix USB VBUS detection on am57xx-idk and force it to peripheral mode until dwc3 role detection is working - Add missing dra72-evm-tps65917 missing voltage supplies accidentally left out of an earlier patch - Fix n900 eMMC detection when booted on qemu - Remove unwanted pr_err on failed memory allocation for prm_common.c - Remove legacy mach-omap2/gpio.c that now is dead code since we boot mach-omap2 in device tree only mode - Fix am572x-idk pcie1 by adding the missing gpio reset pin * tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits) ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn ARM: OMAP2+: PRM: Delete an error message for a failed memory allocation ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dss ARM: dts: am57xx-idk: Put USB2 port in peripheral mode ARM: dts: am57xx-idk: Support VBUS detection on USB2 port dt-bindings: input: Specify the interrupt number of TPS65217 power button dt-bindings: power/supply: Update TPS65217 properties dt-bindings: mfd: Remove TPS65217 interrupts ARM: dts: am335x: Fix the interrupt name of TPS65217 ARM: omap2+: fixing wrong strcat for Non-NULL terminated string ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init() ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev Kit ARM: dts: dra7: Add an empty chosen node to top level DTSI ARM: dts: dm816x: Add an empty chosen node to top level DTSI ARM: dts: dm814x: Add an empty chosen node to top level DTSI ARM: dts: am4372: Add an empty chosen node to top level DTSI ARM: dts: am33xx: Add an empty chosen node to top level DTSI ARM: dts: omap5: Add an empty chosen node to top level DTSI ARM: dts: omap4: Add an empty chosen node to top level DTSI ...
2017-01-04Merge tag 'samsung-soc-4.10-2' of ↵Arnd Bergmann3-33/+77
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Samsung mach/soc update for v4.10: 1. Minor cleanup in smp_operations. 2. Another step in switching s3c24xx to new DMA API. 3. Drop fixed requirement for HZ=200 on Samsung platforms. * tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: Drop fixed 200 Hz timer requirement from Samsung platforms ARM: S3C24XX: Add DMA slave maps for remaining s3c24xx SoCs ARM: EXYNOS: Remove smp_init_cpus hook from platsmp.c
2017-01-04Merge tag 'qcom-fixes-for-4.10-rc1' of ↵Arnd Bergmann1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm ARM64 Fixes for v4.10-rc1 * Fix instability in MSM8996 due to incorrect carveouts * tag 'qcom-fixes-for-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8996: Add required memory carveouts
2017-01-04Merge tag 'renesas-fixes-for-v4.10' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.10 * Provide sd0_uhs node * tag 'renesas-fixes-for-v4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: h3ulcb: Provide sd0_uhs node
2017-01-03MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker codeSudeep Holla1-1/+1
This patch extends the file entry for PSCI so that the newly added PSCI checker module code is also covered. Cc: Mark Rutland <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2017-01-03drivers: psci: annotate timer on stack to silence odebug messagesSudeep Holla1-2/+2
When DEBUG_OBJECTS config is enabled, we get the below odebug warnings: ODEBUG: object is on stack, but not annotated WARNING: CPU: 3 PID: 1304 at kernel/lib/debugobjects.c:300 __debug_object_init+0x1f0/0x458 CPU: 3 PID: 1304 Comm: psci_suspend_te Tainted: G W 4.9.0-06564-gf80f3f199260 #284 task: ffffe9e1b55a1600 task.stack: ffffe9e1b51c0000 PC is at __debug_object_init+0x1f0/0x458 LR is at __debug_object_init+0x1ec/0x458 Call trace: __debug_object_init+0x1f0/0x458 debug_object_activate+0x150/0x260 mod_timer+0xb4/0x4c0 suspend_test_thread+0x1cc/0x3c0 kthread+0x110/0x140 ret_from_fork+0x10/0x40 This patch annotates the timer on the stack using setup_timer_on_stack function to remove the above warnings. Cc: Kevin Brodsky <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2017-01-03ARM64: defconfig: enable DRM_MESON as moduleKevin Hilman1-0/+1
Signed-off-by: Kevin Hilman <[email protected]>
2017-01-03ARM64: dts: meson-gx: Add Graphic Controller nodesNeil Armstrong8-0/+92
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected boards. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2017-01-03ARM64: dts: meson-gxl: fix GPIO includeKevin Hilman1-1/+1
Signed-off-by: Kevin Hilman <[email protected]>
2017-01-03ARM: dts: imx6: Disable "weim" node in the dtsi filesFabio Estevam3-0/+3
Commit 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") causes the following probe error when the weim node is not present on the board dts (such as imx6q-sabresd): imx-weim 21b8000.weim: Invalid 'ranges' configuration imx-weim: probe of 21b8000.weim failed with error -22 There is no need to always enable the "weim" node on mx6. Do the same as in the other i.MX dtsi files where "weim" is disabled and only gets enabled on a per dts basis. All the imx6 weim dts users explicitily provide 'status = "okay"', so this change has no impact on current imx6 weim users. If a board does not use the weim driver it will not describe its 'ranges' property, so simply disable the 'weim' node in the imx6 dtsi files to avoid such probe error message. Fixes: 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2017-01-02ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*Krzysztof Kozlowski1-3/+3
NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so defconfig needs to be adjusted to silence warnings: warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE Signed-off-by: Krzysztof Kozlowski <[email protected]>
2017-01-02ARM: dts: qcom: apq8064: Add missing scm clockBjorn Andersson1-0/+4
As per the device tree binding the apq8064 scm node requires the core clock to be specified, so add this. Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Andy Gross <[email protected]>
2017-01-02ARM64: zynqmp: Fix i2c node's compatible stringMoritz Fischer1-2/+2
The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core which fixes some silicon bugs that needed software workarounds in Version 1.0 that was used on Zynq systems. Signed-off-by: Moritz Fischer <[email protected]> Cc: Michal Simek <[email protected]> Cc: Sören Brinkmann <[email protected]> Cc: Rob Herring <[email protected]> Acked-by: Sören Brinkmann <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2017-01-02ARM64: zynqmp: Fix W=1 dtc 1.4 warningsMichal Simek2-2/+2
The patch removes these warnings reported by dtc 1.4: Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Michal Simek <[email protected]>
2017-01-02ARM: davinci: da8xx: Fix sleeping function called from invalid contextAlexandre Bailon1-19/+15
Everytime the usb20 phy is enabled, there is a "sleeping function called from invalid context" BUG. In addition, there is a recursive locking happening because of the recurse call to clk_enable(). clk_enable() from arch/arm/mach-davinci/clock.c uses spin_lock_irqsave() before to invoke the callback usb20_phy_clk_enable(). usb20_phy_clk_enable() uses clk_get() and clk_enable_prepapre() which may sleep. Replace clk_prepare_enable() by davinci_clk_enable(). Signed-off-by: Alexandre Bailon <[email protected]> Suggested-by: David Lechner <[email protected]> [[email protected]: minor commit description adjustment] Signed-off-by: Sekhar Nori <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.