| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
counters in use.
Testcase for group constraint check for number of counters in use. The
number of programmable counters is from PMC1 to PMC4. Testcase uses four
events with PMC1 to PMC4 and 5th event without any PMC which is expected
to fail since it is exceeding the number of counters in use.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
constraint checks
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) should be excluded from constraint check when
scheduled along with group of events. Example, combination of PMC5,
PMC6, and an event with cache bit will succeed to schedule though first
two events doesn't have cache bit set. Testcase use three events, ie,
600f4(cycles), 500fa(instructions), 22C040 with cache bit (dc_ic) set to
test this constraint check.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) can't have other fields in event code like
cache bits, thresholding or marked bit. PMC5 and PMC6 only supports base
events: ie 500fa and 600f4. Other combinations should fail. Testcase
tries setting other bits in event code for 500fa and 600f4 to check this
scenario.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add new folder for enabling perf event code tests which includes
checking for group constraints, valid/invalid events, also checks for
event excludes, alternatives so on. A new folder "event_code_tests", is
created under "selftests/powerpc/pmu".
Also updates the corresponding Makefiles in "selftests/powerpc" and
"event_code_tests" folder.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
non-branch samples
The testcase uses "instructions" event to generate the samples and fetch
Monitor Mode Control Register A (MMCRA) when overflow. Branch History
Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be
verified by perf interface. Incase sample is not of branch type, bhrb
disable bit is explicitly set to 1. Testcase checks if the bhrb disable
bit is set of MMCRA register via perf interface for ISA v3.1 platform
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The testcase uses event code "0x21c040" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The fields
include PMCxSEL, PMCXCOMB PMCxUNIT, cache. Checks if these fields are
translated correctly via perf interface to MMCR1
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
filter maps
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. All the branch filters are not
supported in powerpc. Example, power10 platform supports any, ind_call
and cond branch filters. Whereas, it is different in power9. Testcase
checks event open for invalid and valid branch sample types. The branch
types for testcase are picked from "perf_branch_sample_type" in
perf_event.h
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
will not crash on any platforms
With sampling, --intr-regs option is used for capturing
interrupt regs. When --intr-regs option is used, PMU code
uses is_sier_available() function which uses PMU flags in
the code. In environment where platform specific PMU is
not registered, PMU flags is not defined. A fix was added
in kernel to address crash while accessing is_sier_available()
function when pmu is not set. commit f75e7d73bdf7 ("powerpc/perf:
Fix crash with is_sier_available when pmu is not set").
Add perf sampling test to exercise this code and make sure
enabling intr_regs shouldn't crash in any platform. Testcase
uses software event cycles since software event will work even
in cases without PMU.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
not crash on any platforms
While enabling branch stack for an event, BHRB (Branch History
Rolling Buffer) filter is set using bhrb_filter_map() callback.
This callback is not defined for cases like generic_compat_pmu
or in case where there is no PMU registered. A fix was added
in kernel to address a crash issue observed while enabling branch
stack for environments which doesn't have this callback.
commit b460b512417a ("powerpc/perf: Fix crashes with
generic_compat_pmu & BHRB").
Add perf sampling test to exercise this code path and make
sure enabling branch stack shouldn't crash in any platform.
Testcase uses software event cycles since software event is
available and can be used even in cases without PMU.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
array size/PVR
The platform check for selftest support "check_pvr_for_sampling_tests"
is specific to sampling tests which includes PVR check, presence of
PMU and extended regs support. Extended regs support is needed for
sampling tests which tests whether PMU registers are programmed
correctly. There could be other sampling tests which may not need
extended regs, example, bhrb filter tests which only needs validity
check via event open.
Hence refactor the platform check to have a common function
"platform_check_for_tests" that checks only for PVR check
and presence of PMU. The existing function
"check_pvr_for_sampling_tests" will invoke the common function
and also will include checks for extended regs specific for
sampling. The common function can also be used by tests other
than sampling like event code tests.
Add macro to find array size ("ARRAY_SIZE") to sampling
tests "misc.h" file. This can be used in next tests to
find event array size. Also update "include/reg.h" to
add macros to find minor and major version from PVR which
will be used in testcases.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The testcase uses "instructions" event to generate the
samples and fetch Monitor Mode Control Register A (MMCRA)
when overflow. Branch History Rolling Buffer(bhrb) disable bit
is part of MMCRA which need to be verified by perf interface.
Testcase checks if the bhrb disable bit of MMCRA register is
programmed correctly via perf interface for ISA v3.1 platform
Also make get_mmcra_ifm return type as u64.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
conditional branch type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for conditional branch type. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for type any branch. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
call type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for indirect branch type. Testcase checks if IFM bits are
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for sample type as PERF_SAMPLE_BRANCH_STACK in sampling
tests. This change is a precursor/helper for sampling testcases, that
test branck stack feature in perf interface.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The testcase uses event code 0x35340401e0 for load only sampling, to
verify the settings of thresh compare field in Monitor Mode Control
Register A (MMCRA: 9-18 bits for power9 and MMCRA: 8-18 bits for
power10). Testcase checks if the thresh compare field is programmed
correctly via perf interface to MMCRA register.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
auxv to detect platform.
The /proc/self/auxv contains information about "platform" on any system.
Also "base platform" which is an indication about platform string
corresponding to the real PVR. When systems are booted in compat mode,
say, power10 booted in power9 mode, "platform" will point to power9
whereas base platform will point to power10. Incase, if the distro
doesn't support platform indicated by real PVR, base platform will have
a default value.
The mismatch of platform/base platform is an indication of system booted
in compat mode. In such cases, distro will have a Generic Compat
registered which supports basic features for performance monitoring.
Some of the selftest needs to be handled differently ( ex: generic
events, alternative events, bhrb filter map) in Generic Compat PMU.
Hence selftest framework needs utility functions to identify such cases.
One way is make sure of auxv information. Below condition can be used to
detect if Generic Compat PMU is registered. ie:
if ((AT_PLATFORM != AT_BASE_PLATFORM) && (AT_BASE_PLATFORM != PVR))
this indicates Generic Compat PMU.
Add utility function in "include/utils.h" to return:
AT_PLATFORM and AT_BASE_PLATFORM from auxv. Also update misc.c in
"sampling_tests" folder to add function to use above check to determine
presence of generic compat pmu.
In other architecture ( like x86 ), pmu_name is exposed via
"/sys/bus/event_source/devices/cpu/caps". The same could be used in
powerpc in future. Since currently we don't have the "caps" support in
powerpc, patch uses auxv information to detect platform type and compat
mode. But as placeholder utility function is added considering
possiblity of getting "caps" information via sysfs. If that doesn't
exist, fallback to using auxv information.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
field
In power10, threshold compare field is not part of the raw event code
and provided via event attribute config1. Hence add the mask and shift
bits based on event attribute config1, to extract the threshold compare
value for power10
Also add a new function called get_thresh_cmp_val to compute and return
the threshold compare field for a given platform, since incase of
power10, threshold compare value provided is decimal.
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
check in power_pmu_disable
commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.
During some of the perf runs, below warning is hit:
WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0
Modules linked in:
-----
NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0
LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0
Call Trace:
[c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable)
[c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60
[c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100
[c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240
[c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140
[c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0
[c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300
[c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100
[c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40
[c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250
[c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0
[c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0
[c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80
[c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0
[c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140
[c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8
[c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0
[c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220
This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:
<<>>
if (any_pmc_overflown(cpuhw))
clear_pmi_irq_pending();
else
WARN_ON(pmi_irq_pending());
<<>>
Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:
<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>
Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt")
Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
We were printing warning if no PMC is found overflown among active PMU
events, but PMI pending in PACA. But this could happen in cases where
PMC overflown is not in active PMC. An inactive event could have caused
the overflow. Hence the warning is not needed. To know pending PMI is
from an inactive event, we need to loop through all PMC's which will
cause more SPR reads via mfspr and increase in context switch. Also in
existing function: perf_event_interrupt, already we ignore PMI's
overflown when it is from an inactive PMC.
2) Fix 2: optimization in clearing pending PMI.
Currently we check for any active PMC overflown before clearing PMI
pending in Paca. This is causing additional SPR read also. From point 1,
we know that if PMI pending in Paca from inactive cases, that is going
to be ignored during replay. Hence if there is pending PMI in Paca, just
clear it irrespective of PMC overflown or not.
In summary, remove the any_pmc_overflown check entirely in
power_pmu_disable. ie If there is a pending PMI in Paca, clear it, since
we are in pmu_disable. There could be cases where PMI is pending because
of inactive PMC ( which later when replayed also will get ignored ), so
WARN_ON could give false warning. Hence removing it.
Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC")
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
note_scsi_host() has been an empty function since
commit 6ee0d9f744d4 ("[POWERPC] Remove unused old code
from powermac setup code").
Remove it.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/26f8b72a4276c0bd8ed63860c7316f6361c351b4.1655978907.git.christophe.leroy@csgroup.eu
|
|
This header was recently cleaned up in commit 76222808fc25 ("powerpc:
Move C prototypes out of asm-prototypes.h"), update the comment to
reflect it's proper purpose.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Older machines don't have the firmware feature that enables the code
this test is testing. Skip the test if the sysfs directory doesn't
exist. Also use the FAIL_IF() macro to provide more verbose error
reporting if an error is encountered.
Fixes: 57201d657eb7 ("selftest/powerpc: Add PAPR sysfs attributes sniff test")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When searching for config options, use the KCONFIG_CONFIG shell variable
so that builds using non-standard config locations work.
Fixes: 26deb04342e3 ("powerpc: prepare string/mem functions for KASAN")
Cc: [email protected] # v5.2+
Signed-off-by: Liam R. Howlett <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This fixes "no previous prototype":
arch/powerpc/kvm/book3s_hv_rm_xics.c:482:15:
warning: no previous prototype for 'xics_rm_h_xirr_x' [-Wmissing-prototypes]
Reported by the kernel test robot.
Fixes: b22af9041927 ("KVM: PPC: Book3s: Remove real mode interrupt controller hcalls handlers")
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Greg Kurz <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit 2fb4706057bc ("powerpc: add support for folded p4d page tables")
erroneously changed PUD setup to a mix of PMD and PUD. Fix it.
While at it, use PTE_TABLE_SIZE instead of PAGE_SIZE for PTE tables
in order to avoid any confusion.
Fixes: 2fb4706057bc ("powerpc: add support for folded p4d page tables")
Cc: [email protected] # v5.8+
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Mike Rapoport <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/95ddfd6176d53e6c85e13bd1c358359daa56775f.1655974558.git.christophe.leroy@csgroup.eu
|
|
kasan detects access beyond the end of the xibm->bitmap allocation:
BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140
Read of size 8 at addr c00000001d1d0118 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28
Call Trace:
[c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable)
[c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710
[c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354
[c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0
[c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140
[c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260
[c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450
[c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118
[c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac
[c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640
[c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0
[c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64
Allocated by task 0:
kasan_save_stack+0x34/0x70
__kasan_kmalloc+0xb4/0xf0
__kmalloc+0x268/0x540
xive_spapr_init+0x4d0/0x77c
pseries_init_irq+0x40/0x27c
init_IRQ+0x44/0x84
start_kernel+0x2a4/0x538
start_here_common+0x1c/0x20
The buggy address belongs to the object at c00000001d1d0118
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
8-byte region [c00000001d1d0118, c00000001d1d0120)
The buggy address belongs to the physical page:
page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d
flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff)
raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480
raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc
^
c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc
c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc
This happens because the allocation uses the wrong unit (bits) when it
should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small
numbers of bits, the allocated object can be smaller than sizeof(long),
which results in invalid accesses.
Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with
bitmap_free() for consistency.
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.
Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.
Fixes: a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: [email protected] # v3.13+
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Let GPIO library assign of_node from the parent device.
This allows to move GPIO library and drivers to use fwnode
APIs instead of being stuck with OF-only interfaces.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.
No functional change intended.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Chris Packham <[email protected]> # for i2c-mpc
Acked-by: Wolfram Sang <[email protected]> # for the I2C part
Acked-by: Mark Brown <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]> # for mscan/mpc5xxx_can
Acked-by: Damien Le Moal <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It seems mpc52xx_get_xtal_freq() is not used anywhere. Remove dead code.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/misc/cxl/cxl.h
line: 1107
+/* check if the given pci_dev is on the the cxl vphb bus */
changed to
+/* check if the given pci_dev is on the cxl vphb bus */
Signed-off-by: Jiang Jian <[email protected]>
Acked-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This is the end of the work started with commit 76222808fc25 ("powerpc:
Move C prototypes out of asm-prototypes.h")
Now that asm/machdep.h doesn't include asm/setup.h anymore, there are
no conflicts anymore with the function prom_init() defined in
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
So we can move it to asm/setup.h
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/e111e4f0addb0fa810d5f6a71d3b8e62c0b53492.1654966508.git.christophe.leroy@csgroup.eu
|
|
asm/machdep.h doesn't need asm/setup.h
Remove it.
Add it directly in files that needs it.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
|
|
and KASAN
When CONFIG_KASAN is selected, we expect prom_init to use __memset()
because it is too early to use memset().
But with CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, the compiler adds calls
to memset() to clear objects on stack, hence the following failure:
PROMCHK arch/powerpc/kernel/prom_init_check
Error: External symbol 'memset' referenced from prom_init.c
make[2]: *** [arch/powerpc/kernel/Makefile:204 : arch/powerpc/kernel/prom_init_check] Erreur 1
prom_find_machine_type() is called from prom_init() and is called only
once, so lets put compat[] in BSS instead of stack to avoid that.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/3802811f7cf94f730be44688539c01bba3a3b5c0.1654875808.git.christophe.leroy@csgroup.eu
|
|
Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.
According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.
Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.
Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: [email protected]
Reported-by: Sathvika Vasireddy <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Reviewed-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
On execve[at], we are zero'ing out most of the thread register state
including gpr[0], which contains the syscall number. Due to this, we
fail to trigger the syscall exit tracepoint properly. Fix this by
retaining gpr[0] in the thread register state.
Before this patch:
# tail /sys/kernel/debug/tracing/trace
cat-123 [000] ..... 61.449351: sys_execve(filename:
7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
cat-124 [000] ..... 62.428481: sys_execve(filename:
7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
echo-125 [000] ..... 65.813702: sys_execve(filename:
7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0)
echo-125 [000] ..... 65.822214: sys_execveat(fd: 0,
filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0)
After this patch:
# tail /sys/kernel/debug/tracing/trace
cat-127 [000] ..... 100.416262: sys_execve(filename:
7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8)
cat-127 [000] ..... 100.418203: sys_execve -> 0x0
echo-128 [000] ..... 103.873968: sys_execve(filename:
7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0)
echo-128 [000] ..... 103.875102: sys_execve -> 0x0
echo-128 [000] ..... 103.882097: sys_execveat(fd: 0,
filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0)
echo-128 [000] ..... 103.883225: sys_execveat -> 0x0
Cc: [email protected]
Signed-off-by: Naveen N. Rao <[email protected]>
Tested-by: Sumit Dubey2 <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: [email protected] # v3.13+
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fddaec ("powerpc/microwatt: Add support for hardware random number generator")
Cc: [email protected] # v5.14+
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
After commit 11ac3e87ce09 ("mm: cma: use pageblock_order as the single
alignment") there is an error at boot about the KVM CMA reservation
failing, eg:
kvm_cma_reserve: reserving 6553 MiB for global area
cma: Failed to reserve 6553 MiB
That makes it impossible to start KVM guests using the hash MMU with
more than 2G of memory, because the VM is unable to allocate a large
enough region for the hash page table, eg:
$ qemu-system-ppc64 -enable-kvm -M pseries -m 4G ...
qemu-system-ppc64: Failed to allocate KVM HPT of order 25: Cannot allocate memory
Aneesh pointed out that this happens because when kvm_cma_reserve() is
called, pageblock_order has not been initialised yet, and is still zero,
causing the checks in cma_init_reserved_mem() against
CMA_MIN_ALIGNMENT_PAGES to fail.
Fix it by moving the call to kvm_cma_reserve() after initmem_init(). The
pageblock_order is initialised in sparse_init() which is called from
initmem_init().
Also move the hugetlb CMA reservation.
Fixes: 11ac3e87ce09 ("mm: cma: use pageblock_order as the single alignment")
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Reviewed-by: Zi Yan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes"
* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: Add Surface Go to VGBS allow list
platform/x86: hp-wmi: Use zero insize parameter only when supported
platform/x86: hp-wmi: Resolve WMI query failures on some devices
platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
platform/x86: barco-p50-gpio: Add check for platform_driver_register
platform/x86/intel: pmc: Support Intel Raptorlake P
platform/x86/intel: Fix pmt_crashlog array reference
platform/mellanox: Add static in struct declaration.
platform/mellanox: Spelling s/platfom/platform/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Tetsuo's patch to trigger build warnings if system-wide wq's are
flushed along with a TP type update and trivial comment update"
* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Switch to new kerneldoc syntax for named variable macro argument
workqueue: Fix type of cpu in trace event
workqueue: Wrap flush_workqueue() using a macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
|
|
Pull cifs client fixes from Steve French:
"Three reconnect fixes, all for stable as well.
One of these three reconnect fixes does address a problem with
multichannel reconnect, but this does not include the additional
fix (still being tested) for dynamically detecting multichannel
adapter changes which will improve those reconnect scenarios even
more"
* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: populate empty hostnames for extra channels
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
|
|
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.
BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
commit be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a21a ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.
Fix this by using zero insize only if 0x5 error code is returned
Tested on Omen 15 AMD (2020) board ID: 8786.
Fixes: be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <[email protected]>
Tested-by: Jorge Lopez <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:
CreateByteField (Arg1, 0x10, D008)
CreateByteField (Arg1, 0x11, D009)
CreateByteField (Arg1, 0x12, D010)
CreateDWordField (Arg1, 0x10, D032)
CreateField (Arg1, 0x80, 0x0400, D128)
In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)
The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not. This particular
behavior occurs in older BIOS and reproduced in OMEN laptops. Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements. This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.
This patch was tested on several OMEN, Elite, and Zbooks. It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx. No problems were reported when testing on several Elite
and Zbooks notebooks.
Fixes: 4b4967cbd268 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
The syntax without dots is available since commit 43756e347f21
("scripts/kernel-doc: Add support for named variable macro arguments").
The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A set of fixes. Most address the new warning we emit at build time
when irq chips are not immutable with some additional tweaks to
gpio-crystalcove from Andy and a small tweak to gpio-dwapd.
- make irq_chip structs immutable in several Diolan and intel drivers
to get rid of the new warning we emit when fiddling with irq chips
- don't print error messages on probe deferral in gpio-dwapb"
* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: dwapb: Don't print error on -EPROBE_DEFER
gpio: dln2: make irq_chip immutable
gpio: sch: make irq_chip immutable
gpio: merrifield: make irq_chip immutable
gpio: wcove: make irq_chip immutable
gpio: crystalcove: Join function declarations and long lines
gpio: crystalcove: Use specific type and API for IRQ number
gpio: crystalcove: make irq_chip immutable
|