| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
[email protected] bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Richard Gobert says:
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/[email protected]/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/[email protected]/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/[email protected]/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/[email protected]/
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
{inner_}network_offset to napi_gro_cb
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <[email protected]>
Signed-off-by: Shigeru Yoshida <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It seems driver missed the point of proper use of device property APIs.
Correct this by updating headers and calls respectively.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.
We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Message-ID: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".
Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Tung Nguyen <[email protected]>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
<IRQ>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:377
print_report+0xc4/0x620 linux/mm/kasan/report.c:488
kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
skb_release_all linux/net/core/skbuff.c:1094
__kfree_skb linux/net/core/skbuff.c:1108
kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
kfree_skb linux/./include/linux/skbuff.h:1244
tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
__udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
dst_input linux/./include/net/dst.h:461
ip_rcv_finish linux/net/ipv4/ip_input.c:449
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
__netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
__napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
napi_poll linux/net/core/dev.c:6645
net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
__do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
do_softirq linux/kernel/softirq.c:454
do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
local_bh_enable linux/./include/linux/bottom_half.h:33
rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
__dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
dev_queue_xmit linux/./include/linux/netdevice.h:3169
neigh_hh_output linux/./include/net/neighbour.h:526
neigh_output linux/./include/net/neighbour.h:540
ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
__ip_finish_output linux/net/ipv4/ip_output.c:313
__ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
NF_HOOK_COND linux/./include/linux/netfilter.h:303
ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
dst_output linux/./include/net/dst.h:451
ip_local_out linux/net/ipv4/ip_output.c:129
ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
sock_sendmsg_nosec linux/net/socket.c:730
__sock_sendmsg linux/net/socket.c:745
__sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
__do_sys_sendto linux/net/socket.c:2203
__se_sys_sendto linux/net/socket.c:2199
__x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
do_syscall_x64 linux/arch/x86/entry/common.c:52
do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7f3434974f29
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29
RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003
RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.
Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers")
Cc: [email protected]
Reported-by: [email protected] # ZDI-CAN-23852
Acked-by: Xin Long <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).
This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Jeffrey Altman <[email protected]>
Acked-by: David Howells <[email protected]>
Signed-off-by: Marc Dionne <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <[email protected]>
Tested-by: Jirong Feng <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Nilay Shroff <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Nilay Shroff <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
With commit ed6776c96c60 ("s390/crypto: remove retry
loop with sleep from PAES pkey invocation") the retry
loop to retry derivation of a protected key from a
secure key has been removed. This was based on the
assumption that theses retries are not needed any
more as proper retries are done in the zcrypt layer.
However, tests have revealed that there exist some
cases with master key change in the HSM and immediately
(< 1 second) attempt to derive a protected key from a
secure key with exact this HSM may eventually fail.
The low level functions in zcrypt_ccamisc.c and
zcrypt_ep11misc.c detect and report this temporary
failure and report it to the caller as -EBUSY. The
re-established retry loop in the paes implementation
catches exactly this -EBUSY and eventually may run
some retries.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Fix wrong format string debug feature: %04x was used
to print out a 32 bit value. - changed to %08x.
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/[email protected]
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Andy Lutomirski <[email protected]>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
|
|
Pass pointer to the TD (struct xhci_td *) directly, instead of its
components separately.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove unnecessary repeated calls to TRB_TO_SLOT_ID(). The slot ID is
stored in the 'slot_id' variable at the function's start.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Instead of plain hexadecimal, use already defined PCI_VENDOR_ID_RENESAS.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's better to keep track on Thunderbolt xHCI IDs in a separate group.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There are three out of many Intel platforms that are using TLAs
instead of the full names in the PCI IDs. Modify them accordingly.
This also fixes the logic of grouping as seemed to be by an LSB
byte of the ID.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
By removing the goto 'cleanup' statement, and replacing it with 'continue',
'break' and 'return', helps simplify the code and further showcase in which
case the while loop iterates.
This change prepares for the comprehensive handle_tx_event() rework.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Simplifying the handle_tx_event() function by addressing the complexity
of its while loop. Replaces specific 'goto cleanup' statements with
'return' statements, applicable only where 'ep->skip' is set to 'false',
ensuring loop termination.
The original while loop, combined with 'goto cleanup', adds unnecessary
complexity. This change aims to untangle the loop's logic, facilitating a
more straightforward review of the upcoming comprehensive rework.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When handle_tx_event() encounters a COMP_MISSED_SERVICE_ERROR or
COMP_NO_PING_RESPONSE_ERROR event, it moves to 'goto cleanup'.
Here, it sets a flag, 'handling_skipped_tds', based on conditions that
exclude these two error events.
Subsequently, the process evaluates the loop that persists as long as
'handling_skipped_tds' remains true. However, since 'trb_comp_code' does
not change after its assignment, if it indicates either of the two error
conditions, the loop terminates immediately.
To simplify this process and enhance clarity, the modification involves
returning immediately upon detecting COMP_MISSED_SERVICE_ERROR or
COMP_NO_PING_RESPONSE_ERROR. This adjustment allows for the direct use of
'ep->skip', removing the necessity for the 'handling_skipped_tds' flag.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
events without TRB
Some transfer events don't always point to a TRB, and consequently don't
have a endpoint ring. In these cases, function handle_tx_event() should
not proceed, because if 'ep->skip' is set, the pointer to the endpoint
ring is used.
To prevent a potential failure and make the code logical, return after
checking the completion code for a Transfer event without TRBs.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If this quirk was set then driver would treat transfer events with
'Success' completion code as 'Short packet' if there were untransferred
bytes left.
This is so common that turn it into default behavior.
xhci_warn_ratelimited() is no longer used after this, so remove it.
A success event with untransferred bytes left doesn't always mean a
misbehaving controller. If there was an error mid a multi-TRB TD it's
allowed to issue a success event for the last TRB in that TD.
See xhci 1.2 spec 4.9.1 Transfer Descriptors
"Note: If an error is detected while processing a multi-TRB TD, the xHC
shall generate a Transfer Event for the TRB that the error was detected
on with the appropriate error Condition Code, then may advance to the
next TD. If in the process of advancing to the next TD, a Transfer TRB
is encountered with its IOC flag set, then the Condition Code of the
Transfer Event generated for that Transfer TRB should be Success,
because there was no error actually associated with the TRB that
generated the Event. However, an xHC implementation may redundantly
assert the original error Condition Code."
Co-developed-by: Niklas Neronin <[email protected]>
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Print the full hex value of PORTSC register in addition to the human
readable decoded string while debugging PORTSC value.
If PORTSC value is 0xffffffff then don't decode it.
This lets us inspect Rsvd bits of PORTSC.
Same is done for USBSTS register values.
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace size_mul() with array_size() in memory allocation and freeing
processes, it fits better semantically.
Macro array_size() is identical to size_mult(), which clamps the max size,
so it's imperative that array_size() is used when freeing said memory.
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
'erst_size' represents the maximum capacity of entries that ERST can hold,
while 'num_entries' indicates the actual number of entries currently held
in the ERST. These two values are identical because the xhci driver does
not support ERST expansion. Thus, 'erst_size' is removed.
Suggested-by: Mathias Nyman <[email protected]>
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Reduce the number of do-while loops by 1. The number of loops should be
number of segment + 1, the +1 is in case deq and enq are on the same
segment. But due to the use of a do-while loop, the expression is
evaluated after executing the loop, thus the loop is executed 1 extra
time.
Changing the do-while loop expression from "<=" to "<", reduces the loop
amount by 1. The expression "<=" would also work if it was a while loop
instead of a do-while loop.
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Address debug message inaccuracies in xhci_ring_expansion_needed().
Specifically, remove the portion of the debug message that indicates the
number of enqueue TRBs to be added to the dequeue segment. This part of
the message may mislead and the calculated value is incorrect. Given that
this value is not of significant importance and the statement is not
consistently accurate, it has been omitted.
The specific issues with the debug message that this commit resolves:
- The calculation of the number of TRBs is incorrect. The current
calculation erroneously includes the link TRB, which is reserved.
Furthermore, the calculated number of TRBs can exceed the dequeue
segment, resulting in a misleading debug message.
- The current phrasing suggests that "ring expansion by X is needed,
adding X TRBs moves enqueue Y TRBs into the dequeue segment".
The intended message, however, is "IF the ring is NOT expanded by X,
THEN adding X TRBs moves enqueue Y TRBs into the dequeue segment".
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Check if requested segments ('segs' or 'ERST_DEFAULT_SEGS') exceeds the
maximum amount ERST supports.
When 'segs' is '0', 'ERST_DEFAULT_SEGS' is used instead. But both values
may not exceed ERST max.
Macro 'ERST_MAX_SEGS' is renamed to 'ERST_DEFAULT_SEGS'. The new name
better represents the macros, which is the number of Event Ring segments
to allocate, when the amount is not specified.
Additionally, rename and change xhci_create_secondary_interrupter()'s
argument 'int num_segs' to 'unsigned int segs'. This makes it the same
as its counter part in xhci_alloc_interrupter().
Fixes: c99b38c41234 ("xhci: add support to allocate several interrupters")
Signed-off-by: Niklas Neronin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This helper was only called from one function.
Removing it both reduces lines of code and made it more readable.
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|