aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-18ipv6: set multicast flag on the multicast routeMatteo Croce1-1/+1
The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18ipv6: create multicast route with RTPROT_KERNELMatteo Croce1-0/+1
The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18Merge tag 'mac80211-for-net-2021-01-18.2' of ↵Jakub Kicinski6-40/+54
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes * tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: check if atf has been disabled in __ieee80211_schedule_txq mac80211: do not drop tx nulldata packets on encrypted links mac80211: fix encryption key selection for 802.3 xmit mac80211: fix fast-rx encryption check mac80211: fix incorrect strlen of .write in debugfs cfg80211: fix a kerneldoc markup cfg80211: Save the regulatory domain with a lock cfg80211/mac80211: fix kernel-doc for SAR APIs ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes1-0/+4
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Tobias Waldekranz <[email protected]> Tested-by: Tobias Waldekranz <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean1-3/+1
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18Merge tag 'spi-fix-v5.11-rc4' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime" * tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence: cache reference clock rate during probe spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
2021-01-18Merge tag 'fixes-2021-01-18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 build fix from Mike Rapoport: "Fix an ia64 build failure caused by memory model changes" * tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix build failure caused by memory model changes
2021-01-18Merge branch 'linus' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed()
2021-01-18mt76: mt7663s: fix rx buffer refcountingLorenzo Bianconi1-5/+4
Similar to mt7601u driver, fix erroneous rx page refcounting Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/dca19c9d445156201bc41f7cbb6e894bbc9a678c.1610644945.git.lorenzo@kernel.org
2021-01-18mt7601u: fix rx buffer refcountingLorenzo Bianconi1-2/+1
Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
2021-01-18x86/xen: fix 'nopvspin' build errorRandy Dunlap1-0/+2
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled. Fixes this build error: ../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’: ../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function) nopvspin = true; Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available") Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-01-17Linux 5.11-rc4Linus Torvalds1-1/+1
2021-01-17Merge tag 'perf-tools-fixes-2021-01-17' of ↵Linus Torvalds12-208/+224
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'CPU too large' error in Intel PT - Correct event attribute sizes in 'perf inject' - Sync build_bug.h and kvm.h kernel copies - Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example - libbpf tests fixes - Fix shadow stat 'perf test' for non-bash shells - Take cgroups into account for shadow stats in 'perf stat' * tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Correct event attribute sizes perf intel-pt: Fix 'CPU too large' error perf stat: Take cgroups into account for shadow stats perf stat: Introduce struct runtime_stat_data libperf tests: Fail when failing to get a tracepoint id libperf tests: If a test fails return non-zero libperf tests: Avoid uninitialized variable warning perf test: Fix shadow stat test for non-bash shells tools headers: Syncronize linux/build_bug.h with the kernel sources tools headers UAPI: Sync kvm.h headers with the kernel sources perf bpf examples: Fix bpf.h header include directive in 5sec.c example
2021-01-17Merge tag 'powerpc-5.11-4' of ↵Linus Torvalds2-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a lack of alignment in our linker script, that can lead to crashes depending on configuration etc. One fix for the 32-bit VDSO after the C VDSO conversion. Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy" * tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Fix clock_gettime_fallback for vdso32 powerpc: Fix alignment bug within the init sections
2021-01-17Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-5/+11
Pull misc vfs fixes from Al Viro: "Several assorted fixes. I still think that audit ->d_name race is better fixed this way for the benefit of backports, with any possibly fancier variants done on top of it" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dump_common_audit_data(): fix racy accesses to ->d_name iov_iter: fix the uaccess area in copy_compat_iovec_from_user umount(2): move the flag validity checks first
2021-01-17mm: don't put pinned pages into the swap cacheLinus Torvalds1-0/+2
So technically there is nothing wrong with adding a pinned page to the swap cache, but the pinning obviously means that the page can't actually be free'd right now anyway, so it's a bit pointless. However, the real problem is not with it being a bit pointless: the real issue is that after we've added it to the swap cache, we'll try to unmap the page. That will succeed, because the code in mm/rmap.c doesn't know or care about pinned pages. Even the unmapping isn't fatal per se, since the page will stay around in memory due to the pinning, and we do hold the connection to it using the swap cache. But when we then touch it next and take a page fault, the logic in do_swap_page() will map it back into the process as a possibly read-only page, and we'll then break the page association on the next COW fault. Honestly, this issue could have been fixed in any of those other places: (a) we could refuse to unmap a pinned page (which makes conceptual sense), or (b) we could make sure to re-map a pinned page writably in do_swap_page(), or (c) we could just make do_wp_page() not COW the pinned page (which was what we historically did before that "mm: do_wp_page() simplification" commit). But while all of them are equally valid models for breaking this chain, not putting pinned pages into the swap cache in the first place is the simplest one by far. It's also the safest one: the reason why do_wp_page() was changed in the first place was that getting the "can I re-use this page" wrong is so fraught with errors. If you do it wrong, you end up with an incorrectly shared page. As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or do_swap_page() would be a serious bug since it is only a (very good) heuristic. Re-using the page requires a hard black-and-white rule with no room for ambiguity. In contrast, saying "this page is very likely dma pinned, so let's not add it to the swap cache and try to unmap it" is an obviously safe thing to do, and if the heuristic might very rarely be a false positive, no harm is done. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Reported-and-tested-by: Martin Raiber <[email protected]> Cc: Pavel Begunkov <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Peter Xu <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-17x86/hyperv: Initialize clockevents after LAPIC is initializedDexuan Cui1-3/+26
With commit 4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually initialized before LAPIC is initialized: see apic_intr_mode_init() x86_platform.apic_post_init() hyperv_init() hv_stimer_alloc() apic_bsp_setup() setup_local_APIC() setup_local_APIC() temporarily disables LAPIC, initializes it and re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's registered, it can be programmed immediately and the timer can fire very soon: hv_stimer_init clockevents_config_and_register clockevents_register_device tick_check_new_device tick_setup_device tick_setup_periodic(), tick_setup_oneshot() clockevents_program_event When the timer fires in the hypervisor, if the LAPIC is in the disabled state, new versions of Hyper-V ignore the event and don't inject the timer interrupt into the VM, and hence the VM hangs when it boots. Note: when the VM starts/reboots, the LAPIC is pre-enabled by the firmware, so the window of LAPIC being temporarily disabled is pretty small, and the issue can only happen once out of 100~200 reboots for a 40-vCPU VM on one dev host, and on another host the issue doesn't reproduce after 2000 reboots. The issue is more noticeable for kdump/kexec, because the LAPIC is disabled by the first kernel, and stays disabled until the kdump/kexec kernel enables it. This is especially an issue to a Generation-2 VM (for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000 (rather than CONFIG_HZ=250) is used. Fix the issue by moving hv_stimer_alloc() to a later place where the LAPIC timer is initialized. Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining") Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2021-01-17ia64: fix build failure caused by memory model changesMike Rapoport1-0/+1
The change of ia64's default memory model to SPARSEMEM causes defconfig build to fail: CC kernel/async.o In file included from include/linux/numa.h:25, from include/linux/async.h:13, from kernel/async.c:47: arch/ia64/include/asm/sparsemem.h:14:40: warning: "PAGE_SHIFT" is not defined, evaluates to 0 [-Wundef] 14 | #if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) | ^~~~~~~~~~ In file included from include/linux/gfp.h:6, from include/linux/xarray.h:14, from include/linux/radix-tree.h:19, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/energy_model.h:7, from include/linux/device.h:16, from include/linux/async.h:14, from kernel/async.c:47: include/linux/mmzone.h:1156:2: error: #error Allocator MAX_ORDER exceeds SECTION_SIZE 1156 | #error Allocator MAX_ORDER exceeds SECTION_SIZE | ^~~~~ The error cause is the missing definition of PAGE_SHIFT in the calculation of SECTION_SIZE_BITS. Add include of <asm/page.h> to arch/ia64/include/asm/sparsemem.h to solve the problem. Fixes: 214496cb1870 ("ia64: make SPARSEMEM default and disable DISCONTIGMEM") Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Mike Rapoport <[email protected]>
2021-01-16skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() tooAlexander Lobakin1-1/+5
Commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") ensured that skbs with data size lower than 1025 bytes will be kmalloc'ed to avoid excessive page cache fragmentation and memory consumption. However, the fix adressed only __napi_alloc_skb() (primarily for virtio_net and napi_get_frags()), but the issue can still be achieved through __netdev_alloc_skb(), which is still used by several drivers. Drivers often allocate a tiny skb for headers and place the rest of the frame to frags (so-called copybreak). Mirror the condition to __netdev_alloc_skb() to handle this case too. Since v1 [0]: - fix "Fixes:" tag; - refine commit message (mention copybreak usecase). [0] https://lore.kernel.org/netdev/[email protected] Fixes: a1c7fff7e18f ("net: netdev_alloc_skb() use build_skb()") Signed-off-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-16Merge tag 'scsi-fixes' of ↵Linus Torvalds5-22/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine minor fixes, seven in drivers and two in the core SCSI disk driver (sd) which should be harmless involving removing an unused variable and quietening a spurious warning" Signed-off-by: James E.J. Bottomley <[email protected]> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove obsolete variable in sd_remove() scsi: sd: Suppress spurious errors when WRITE SAME is being disabled scsi: scsi_debug: Fix memleak in scsi_debug_init() scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility" scsi: qedi: Correct max length of CHAP secret scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback scsi: ufs: Relocate flush of exceptional event scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL scsi: ufs: Fix possible power drain during system suspend
2021-01-16dump_common_audit_data(): fix racy accesses to ->d_nameAl Viro1-2/+5
We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: [email protected] # v2.6.2+ Signed-off-by: Al Viro <[email protected]>
2021-01-16Merge tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds3-13/+18
Pull block fixes from Jens Axboe: "Just an nvme pull request via Christoph: - don't initialize hwmon for discover controllers (Sagi Grimberg) - fix iov_iter handling in nvme-tcp (Sagi Grimberg) - fix a preempt warning in nvme-tcp (Sagi Grimberg) - fix a possible NULL pointer dereference in nvme (Israel Rukshin)" * tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block: nvme: don't intialize hwmon for discovery controllers nvme-tcp: fix possible data corruption with bio merges nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
2021-01-16Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+41
Pull io_uring fixes from Jens Axboe: "We still have a pending fix for a cancelation issue, but it's still being investigated. In the meantime: - Dead mm handling fix (Pavel) - SQPOLL setup error handling (Pavel) - Flush timeout sequence fix (Marcelo) - Missing finish_wait() for one exit case" * tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block: io_uring: ensure finish_wait() is always called in __io_uring_task_cancel() io_uring: flush timeouts that should already have expired io_uring: do sqo disable on install_fd error io_uring: fix null-deref in io_disable_sqo_submit io_uring: don't take files/mm for a dead task io_uring: drop mm and files after task_work_run
2021-01-16Merge tag 'riscv-for-linus-5.11-rc4' of ↵Linus Torvalds14-35/+68
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "There are a few more fixes than a normal rc4, largely due to the bubble introduced by the holiday break: - return -ENOSYS for syscall number -1, which previously returned an uninitialized value. - ensure of_clk_init() has been called in time_init(), without which clock drivers may not be initialized. - fix sifive,uart0 driver to properly display the baud rate. A fix to initialize MPIE that allows interrupts to be processed during system calls. - avoid erronously begin tracing IRQs when interrupts are disabled, which at least triggers suprious lockdep failures. - workaround for a warning related to calling smp_processor_id() while preemptible. The warning itself is suprious on currently availiable systems. - properly include the generic time VDSO calls. A fix to our kasan address mapping. A fix to the HiFive Unleashed device tree, which allows the Ethernet PHY to be properly initialized by Linux (as opposed to relying on the bootloader). - defconfig update to include SiFive's GPIO driver, which is present on the HiFive Unleashed and necessary to initialize the PHY. - avoid allocating memory while initializing reserved memory. - avoid allocating the last 4K of memory, as pointers there alias with syscall errors. There are also two cleanups that should have no functional effect but do fix build warnings: - drop a duplicated definition of PAGE_KERNEL_EXEC. - properly declare the asm register SP shim. - cleanup the rv32 memory size Kconfig entry, to reflect the actual size of memory availiable" * tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix maximum allowed phsyical memory for RV32 RISC-V: Set current memblock limit RISC-V: Do not allocate memblock while iterating reserved memblocks riscv: stacktrace: Move register keyword to beginning of declaration riscv: defconfig: enable gpio support for HiFive Unleashed dts: phy: add GPIO number and active state used for phy reset dts: phy: fix missing mdio device and probe failure of vsc8541-01 device riscv: Fix KASAN memory mapping. riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL riscv: cacheinfo: Fix using smp_processor_id() in preemptible riscv: Trace irq on only interrupt is enabled riscv: Drop a duplicated PAGE_KERNEL_EXEC riscv: Enable interrupts during syscalls with M-Mode riscv: Fix sifive serial driver riscv: Fix kernel time_init() riscv: return -ENOSYS for syscall -1
2021-01-16netfilter: nft_dynset: dump expressions when set definition contains no ↵Pablo Neira Ayuso1-14/+17
expressions If the set definition provides no stateful expressions, then include the stateful expression in the ruleset listing. Without this fix, the dynset rule listing shows the stateful expressions provided by the set definition. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-01-16mm: don't play games with pinned pages in clear_page_refsLinus Torvalds1-0/+21
Turning a pinned page read-only breaks the pinning after COW. Don't do it. The whole "track page soft dirty" state doesn't work with pinned pages anyway, since the page might be dirtied by the pinning entity without ever being noticed in the page tables. Signed-off-by: Linus Torvalds <[email protected]>
2021-01-16mm: fix clear_refs_write lockingLinus Torvalds1-23/+9
Turning page table entries read-only requires the mmap_sem held for writing. So stop doing the odd games with turning things from read locks to write locks and back. Just get the write lock. Signed-off-by: Linus Torvalds <[email protected]>
2021-01-16netfilter: nft_dynset: add timeout extension to templatePablo Neira Ayuso1-1/+3
Otherwise, the newly create element shows no timeout when listing the ruleset. If the set definition does not specify a default timeout, then the set element only shows the expiration time, but not the timeout. This is a problem when restoring a stateful ruleset listing since it skips the timeout policy entirely. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-01-16netfilter: nft_dynset: honor stateful expressions in set definitionPablo Neira Ayuso3-3/+10
If the set definition contains stateful expressions, allocate them for the newly added entries from the packet path. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-01-15RISC-V: Fix maximum allowed phsyical memory for RV32Atish Patra1-2/+4
Linux kernel can only map 1GB of address space for RV32 as the page offset is set to 0xC0000000. The current description in the Kconfig is confusing as it indicates that RV32 can support 2GB of physical memory. That is simply not true for current kernel. In future, a 2GB split support can be added to allow 2GB physical address space. Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-15RISC-V: Set current memblock limitAtish Patra1-2/+14
Currently, linux kernel can not use last 4k bytes of addressable space because IS_ERR_VALUE macro treats those as an error. This will be an issue for RV32 as any memblock allocator potentially allocate chunk of memory from the end of DRAM (2GB) leading bad address error even though the address was technically valid. Fix this issue by limiting the memblock if available memory spans the entire address space. Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-15RISC-V: Do not allocate memblock while iterating reserved memblocksAtish Patra1-11/+13
Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-15iov_iter: fix the uaccess area in copy_compat_iovec_from_userChristoph Hellwig1-1/+1
sizeof needs to be called on the compat pointer, not the native one. Fixes: 89cd35c58bc2 ("iov_iter: transparently handle compat iovecs in import_iovec") Reported-by: David Laight <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Al Viro <[email protected]>
2021-01-15net_sched: avoid shift-out-of-bounds in tcindex_set_parms()Eric Dumazet1-2/+6
tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT attribute is not silly. UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29 shift exponent 255 is too large for 32-bit type 'int' CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline] tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15net_sched: gen_estimator: support large ewma logEric Dumazet1-4/+7
syzbot report reminded us that very big ewma_log were supported in the past, even if they made litle sense. tc qdisc replace dev xxx root est 1sec 131072sec ... While fixing the bug, also add boundary checks for ewma_log, in line with range supported by iproute2. UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38 shift exponent -1 is negative CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83 call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417 expire_timers kernel/time/timer.c:1462 [inline] __run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731 __run_timers kernel/time/timer.c:1712 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744 __do_softirq+0x2bc/0xa77 kernel/softirq.c:343 asm_call_irq_on_stack+0xf/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:226 [inline] __irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420 irq_exit_rcu+0x5/0x20 kernel/softirq.c:432 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628 RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline] RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline] RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline] RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516 Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15net_sched: reject silly cell_log in qdisc_get_rtab()Eric Dumazet1-1/+2
iproute2 probably never goes beyond 8 for the cell exponent, but stick to the max shift exponent for signed 32bit. UBSAN reported: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22 shift exponent 130 is too large for 32-bit type 'int' CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x183/0x22e lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345 ___sys_sendmsg net/socket.c:2399 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Cong Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15Merge tag 'for-5.11/dm-fixes-1' of ↵Linus Torvalds8-34/+239
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM-raid's raid1 discard limits so discards work. - Select missing Kconfig dependencies for DM integrity and zoned targets. - Four fixes for DM crypt target's support to optionally bypass kcryptd workqueues. - Fix DM snapshot merge supports missing data flushes before committing metadata. - Fix DM integrity data device flushing when external metadata is used. - Fix DM integrity's maximum number of supported constructor arguments that user can request when creating an integrity device. - Eliminate DM core ioctl logging noise when an ioctl is issued without required CAP_SYS_RAWIO permission. * tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: defer decryption to a tasklet if interrupts disabled dm integrity: fix the maximum number of arguments dm crypt: do not call bio_endio() from the dm-crypt tasklet dm integrity: fix flush with external metadata device dm: eliminate potential source of excessive kernel log noise dm snapshot: flush merged data before committing metadata dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq dm crypt: do not wait for backlogged crypto request completion in softirq dm zoned: select CONFIG_CRC32 dm integrity: select CRYPTO_SKCIPHER dm raid: fix discard limits for raid1
2021-01-15Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski14-115/+128
Daniel Borkmann says: ==================== pull-request: bpf 2021-01-16 1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in link creation's error path causing a refcount underflow, from Jiri Olsa. 2) Fix BTF validation errors for the case where kernel modules don't declare any new types and end up with an empty BTF, from Andrii Nakryiko. 3) Fix BPF local storage helpers to first check their {task,inode} owners for being NULL before access, from KP Singh. 4) Fix a memory leak in BPF setsockopt handling for the case where optlen is zero and thus temporary optval buffer should be freed, from Stanislav Fomichev. 5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for raw_tracepoint caused by too big ctx_size_in, from Song Liu. 6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL} registers were spilled to stack but not recognized, from Gilad Reti. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: MAINTAINERS: Update my email address selftests/bpf: Add verifier test for PTR_TO_MEM spill bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling bpf: Reject too big ctx_size_in for raw_tp test run libbpf: Allow loading empty BTFs bpf: Allow empty module BTFs bpf: Don't leak memory in bpf getsockopt when optlen == 0 bpf: Update local storage test to check handling of null ptrs bpf: Fix typo in bpf_inode_storage.c bpf: Local storage helpers should check nullness of owner ptr passed bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15cls_flower: call nla_ok() before nla_next()Cong Wang1-9/+13
fl_set_enc_opt() simply checks if there are still bytes left to parse, but this is not sufficent as syzbot seems to be able to generate malformatted netlink messages. nla_ok() is more strict so should be used to validate the next nlattr here. And nla_validate_nested_deprecated() has less strict check too, it is probably too late to switch to the strict version, but we can just call nla_ok() too after it. Reported-and-tested-by: [email protected] Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options") Cc: Jamal Hadi Salim <[email protected]> Cc: Xin Long <[email protected]> Cc: Jiri Pirko <[email protected]> Signed-off-by: Cong Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds11-23/+33
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: MAINTAINERS and mm (slub, pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure, and process_vm_access)" * emailed patches from Andrew Morton <[email protected]>: mm/process_vm_access.c: include compat.h mm,hwpoison: fix printing of page flags MAINTAINERS: add Vlastimil as slab allocators maintainer mm/hugetlb: fix potential missing huge page size info mm: migrate: initialize err in do_migrate_pages mm/vmalloc.c: fix potential memory leak arm/kasan: fix the array size of kasan_early_shadow_pte[] mm/memcontrol: fix warning in mem_cgroup_page_lruvec() mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint mm, slub: consider rest of partial list if acquire_slab() fails
2021-01-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds7-68/+83
Pull rdma fixes from Jason Gunthorpe: "A fairly modest set of bug fixes, nothing abnormal from the merge window The ucma patch is a bit on the larger side, but given the regression was recently added I've opted to forward it to the rc stream. - Fix a ucma memory leak introduced in v5.9 while fixing the Syzkaller bugs - Don't fail when the xarray wraps for user verbs objects - User triggerable oops regression from the umem page size rework - Error unwind bugs in usnic, ocrdma, mlx5 and cma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cma: Fix error flow in default_roce_mode_store RDMA/mlx5: Fix wrong free of blue flame register on error IB/mlx5: Fix error unwinding when set_has_smi_cap fails RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two() RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd() RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp RDMA/restrack: Don't treat as an error allocation ID wrapping RDMA/ucma: Do not miss ctx destruction steps in some cases
2021-01-15io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()Jens Axboe1-0/+1
If we enter with requests pending and performm cancelations, we'll have a different inflight count before and after calling prepare_to_wait(). This causes the loop to restart. If we actually ended up canceling everything, or everything completed in-between, then we'll break out of the loop without calling finish_wait() on the waitqueue. This can trigger a warning on exit_signals(), as we leave the task state in TASK_UNINTERRUPTIBLE. Put a finish_wait() after the loop to catch that case. Cc: [email protected] # 5.9+ Signed-off-by: Jens Axboe <[email protected]>
2021-01-15MAINTAINERS: Update my email addressBjörn Töpel2-2/+4
My Intel email will stop working in a not too distant future. Move my MAINTAINERS entries to my kernel.org address. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-15Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds10-129/+186
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A number of bug fixes for ext4: - Fix for the new fast_commit feature - Fix some error handling codepaths in whiteout handling and mountpoint sampling - Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove expensive flush on fast commit ext4: fix bug for rename with RENAME_WHITEOUT ext4: fix wrong list_splice in ext4_fc_cleanup ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR ext4: don't leak old mountpoint samples ext4: drop ext4_handle_dirty_super() ext4: fix superblock checksum failure when setting password salt ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super() ext4: save error info to sb through journal if available ext4: protect superblock modifications with a buffer lock ext4: drop sync argument of ext4_commit_super() ext4: combine ext4_handle_error() and save_error_info()
2021-01-15Merge tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds5-7/+6
Pull cifs fixes from Steve French: "Two small cifs fixes for stable (including an important handle leak fix) and three small cleanup patches" * tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: style: replace one-element array with flexible-array cifs: connect: style: Simplify bool comparison fs: cifs: remove unneeded variable in smb3_fs_context_dup cifs: fix interrupted close commands cifs: check pointer before freeing
2021-01-15Merge tag 'arm64-fixes' of ↵Linus Torvalds17-107/+56
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Set the minimum GCC version to 5.1 for arm64 due to earlier compiler bugs. - Make atomic helpers __always_inline to avoid a section mismatch when compiling with clang. - Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the arm64_dma32_phys_limit variable, no longer needed with a dynamic ZONE_DMA sizing in 5.11). - Remove redundant IRQ flag tracing that was leaving lockdep inconsistent with the hardware state. - Revert perf events based hard lockup detector that was causing smp_processor_id() to be called in preemptible context. - Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to PT_REGS_SIZE, function prototypes added. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: selftests: Fix spelling of 'Mismatch' arm64: syscall: include prototype for EL0 SVC functions compiler.h: Raise minimum version of GCC to 5.1 for arm64 arm64: make atomic helpers __always_inline arm64: rename S_FRAME_SIZE to PT_REGS_SIZE Revert "arm64: Enable perf events based hard lockup detector" arm64: entry: remove redundant IRQ flag tracing arm64: Remove arm64_dma32_phys_limit and its uses
2021-01-15Merge tag 'mips_fixes_5.11.1' of ↵Linus Torvalds5-4/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix coredumps on 64bit kernels - fix for alignment bugs preventing booting - fix checking for failed irq_alloc_desc calls * tag 'mips_fixes_5.11.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix unreachable code in octeon_irq_init_ciu MIPS: relocatable: fix possible boot hangup with KASLR enabled MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
2021-01-15perf inject: Correct event attribute sizesAl Grant1-0/+8
When 'perf inject' reads a perf.data file from an older version of perf, it writes event attributes into the output with the original size field, but lays them out as if they had the size currently used. Readers see a corrupt file. Update the size field to match the layout. Signed-off-by: Al Grant <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Denis Nikitin <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf intel-pt: Fix 'CPU too large' errorAdrian Hunter2-3/+3
In some cases, the number of cpus (nr_cpus_online) is confused with the maximum cpu number (nr_cpus_avail), which results in the error in the example below: Example on system with 8 cpus: Before: # echo 0 > /sys/devices/system/cpu/cpu2/online # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.147 MB perf.data ] # ./perf script --itrace=e Requested CPU 7 too large. Consider raising MAX_NR_CPUS 0x25908 [0x8]: failed to process type: 68 [Invalid argument] After: # ./perf script --itrace=e # Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Kan Liang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf stat: Take cgroups into account for shadow statsNamhyung Kim1-7/+19
As of now it doesn't consider cgroups when collecting shadow stats and metrics so counter values from different cgroups will be saved in a same slot. This resulted in incorrect numbers when those cgroups have different workloads. For example, let's look at the scenario below: cgroups A and C runs same workload which burns a cpu while cgroup B runs a light workload. $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 3,958,116,522 cycles A 6,722,650,929 instructions A # 2.53 insn per cycle 1,132,741 cycles B 571,743 instructions B # 0.00 insn per cycle 4,007,799,935 cycles C 6,793,181,523 instructions C # 2.56 insn per cycle 1.001050869 seconds time elapsed When I run 'perf stat' with single workload, it usually shows IPC around 1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A. But in this case, since cgroups are ignored, cycles are averaged so it used the lower value for IPC calculation and resulted in around 2.5. avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066 IPC (A) : 6722650929 / 2655683066 = 2.531 IPC (B) : 571743 / 2655683066 = 0.0002 IPC (C) : 6793181523 / 2655683066 = 2.557 We can simply compare cgroup pointers in the evsel and it'll be NULL when cgroups are not specified. With this patch, I can see correct numbers like below: $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 4,171,051,687 cycles A 7,219,793,922 instructions A # 1.73 insn per cycle 1,051,189 cycles B 583,102 instructions B # 0.55 insn per cycle 4,171,124,710 cycles C 7,192,944,580 instructions C # 1.72 insn per cycle 1.007909814 seconds time elapsed Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.