| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge thermal core fixes and cleanups for 6.12:
- Refuse to accept trip point temperature or hysteresis that would lead
to an invalid threshold value when setting them via sysfs (Rafael
Wysocki).
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki).
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki).
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki).
* thermal-core:
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
|
|
There are only two callers of thermal_zone_device_is_enabled()
and one of them call is under the zone lock and the other one uses
lockdep_assert_held() on that lock. Thus the lockdep_assert_held()
in thermal_zone_device_is_enabled() is redundant and it could be
dropped, but then the function would merely become a wrapper around
a simple tz->mode check that is more convenient to do directly.
Accordingly, drop thermal_zone_device_is_enabled() altogether and update
its callers to check tz->mode directly as appropriate.
While at it, combine the tz->mode and tz->suspended checks in
__thermal_zone_device_update() because they are of a similar category
and if any of them evaluates to "true", the outcome is the same.
No intentinal functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The only case in which thermal_zone_device_set_polling() is called
with its second argument equal to zero is when passive cooling is
under way and passive_delay_jiffies is 0, which only happens when
the given thermal zone is not polled at all.
If monitor_thermal_zone() is modified to check passive_delay_jiffies
directly, the check of the thermal_zone_device_set_polling() second
argument against 0 can be dropped and a passive_delay check can be
dropped from thermal_zone_device_register_with_trips(), so change the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Since monitor_thermal_zone() is only called when the given thermal zone
has been enabled, as per the thermal_zone_device_is_enabled() check in
__thermal_zone_device_update(), the tz->mode check in it always
evaluates to "false" and the thermal_zone_device_set_polling()
invocation depending on it is dead code, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Along the lines of commit 24aad192c671 ("thermal: core: Drop
redundant checks from thermal_bind_cdev_to_trip()") notice that
thermal_unbind_cdev_from_trip() is only called by
thermal_zone_cdev_unbind() under the thermal zone lock, so it
need not use lockdep_assert_held() for that lock.
No functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab1b ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes: be0a3600aa1e ("thermal: sysfs: Rework the handling of trip point updates")
Cc: 6.8+ <[email protected]> # 6.8+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Merge thermal core updates for 6.12 which, among other things, rework
the thermal driver interface for binding cooling devices to thermal
zones and add a thermal core testing module:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki).
- Update the thermal sysfs code to store trip point attributes in trip
descriptors and get to trip points via attribute pointers (Rafael
Wysocki).
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano).
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki).
- Replace the thermal zone .bind() and .unbind() callbacks for binding
cooling devices to thermal zones with one .should_bind() callback
used for deciding whether or not a given cooling devices should be
bound to a given trip point in a given thermal zone (Rafael Wysocki).
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki).
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki).
* thermal-core: (31 commits)
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
thermal: core: Fix rounding of delay jiffies
thermal: core: Clean up trip bind/unbind functions
thermal: core: Drop unused bind/unbind functions and callbacks
thermal/of: Use the .should_bind() thermal zone callback
thermal: imx: Use the .should_bind() thermal zone callback
mlxsw: core_thermal: Use the .should_bind() thermal zone callback
platform/x86: acerhdf: Use the .should_bind() thermal zone callback
thermal: core: Unexport thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
thermal: ACPI: Use the .should_bind() thermal zone callback
thermal: core: Introduce .should_bind() thermal zone callback
thermal: core: Move thermal zone locking out of bind/unbind functions
thermal: sysfs: Use the dev argument in instance-related show/store
thermal: core: Drop redundant thermal instance checks
thermal: core: Rearrange checks in thermal_bind_cdev_to_trip()
thermal: core: Fold two functions into their respective callers
thermal: Introduce a debugfs-based testing facility
thermal/core: Compute low and high boundaries in thermal_zone_device_update()
...
|
|
After recent changes, it is only used for printing a debug message
in __thermal_cdev_update() which arguably is not worth preserving.
Drop it along with the dev_dbg() statement using it.
Link: https://lore.kernel.org/linux-pm/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Since thermal_bind_cdev_to_trip() is only called by
thermal_zone_cdev_binding() under the thermal zone lock and the latter
is only called by thermal_zone_device_register_with_trips() and
__thermal_cooling_device_register(), under thermal_list_lock in both
cases, both lockdep_assert_held() assertions can be dropped from it.
Moreover, in both cases thermal_zone_cdev_binding() is called after
both tz and cdev have been added to the global lists of thermal zones
and cooling device, respectively, so the check against their list nodes
in thermal_bind_cdev_to_trip() is redundant and can be dropped either.
Link: https://lore.kernel.org/linux-pm/CAJZ5v0jwkc2PB+osSkkYF9vJ1Vpp3MFE=cGQmQ2Xzjb3yjVfJg@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Rename thermal_zone_cdev_binding() and thermal_zone_cdev_unbinding()
to thermal_zone_cdev_bind() and thermal_zone_cdev_unbind(), respectively,
to make the naming more consistent with the rest of the code.
No functional impact.
Link: https://lore.kernel.org/linux-pm/[email protected]/
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Using round_jiffies() in thermal_set_delay_jiffies() is invalid because
its argument should be time in the future in absolute jiffies and it
computes the result with respect to the current jiffies value at the
invocation time. Fortunately, in the majority of cases it does not
make any difference due to the time_is_after_jiffies() check in
round_jiffies_common().
While using round_jiffies_relative() instead of round_jiffies() might
reflect the intent a bit better, it still would not be defensible
because that function should be called when the timer is about to be
set and it is not suitable for pre-computation of delay values.
Accordingly, drop thermal_set_delay_jiffies() altogether, simply
convert polling_delay and passive_delay to jiffies during thermal
zone initialization and make thermal_zone_device_set_polling() call
round_jiffies_relative() on the delay if it is greather than 1 second.
Fixes: 17d399cd9c89 ("thermal/core: Precompute the delays from msecs to jiffies")
Fixes: e5f2cda61d06 ("thermal/core: Move thermal_set_delay_jiffies to static")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make thermal_bind_cdev_to_trip() take a struct cooling_spec pointer
to reduce the number of its arguments, change the return type of
thermal_unbind_cdev_from_trip() to void and rearrange the code in
thermal_zone_cdev_binding() to reduce the indentation level.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changed the name of a new function argument ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
There are no more callers of thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), so drop them along with all of
the corresponding headers, code and documentation.
Moreover, because the .bind() and .unbind() thermal zone callbacks would
only be used when the above functions, respectively, were called, drop
them as well along with all of the code related to them.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the thermal_of driver use the .should_bind() thermal zone callback
to provide the thermal core with the information on whether or not to
bind the given cooling device to the given trip point in the given
thermal zone. If it returns 'true', the thermal core will bind the
cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
assumed the same trip points ordering in the driver and in the thermal
core (that may not be true any more in the future). The .bind()
callback would walk the given thermal zone's cooling maps to find all
of the valid trip point combinations with the given cooling device and
it would call thermal_zone_bind_cooling_device() for all of them using
trip point indices reflecting the ordering of the trips in the DT.
The .should_bind() callback still walks the thermal zone's cooling maps,
but it can use the trip object passed to it by the thermal core to find
the trip in question in the first place and then it uses the
corresponding 'cooling-device' entries to look up the given cooling
device. To be able to match the trip object provided by the thermal
core to a specific device node, the driver sets the 'priv' field of each
trip to the corresponding device node pointer during initialization.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Tested-by: Daniel Lezcano <[email protected]> # rk3399-rock960
Link: https://patch.msgid.link/[email protected]
[ rjw: Removed excessive of_node_put() ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Terminating for_each_available_child_of_node() loop requires dropping OF
node reference, so bailing out on errors misses this. Solve the OF node
reference leak with scoped for_each_available_child_of_node_scoped().
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
thermal_of_zone_register() calls of_thermal_zone_find() which will
iterate over OF nodes with for_each_available_child_of_node() to find
matching thermal zone node. When it finds such, it exits the loop and
returns the node. Prematurely ending for_each_available_child_of_node()
loops requires dropping OF node reference, thus success of
of_thermal_zone_find() means that caller must drop the reference.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Terminating for_each_child_of_node() loop requires dropping OF node
reference, so bailing out after thermal_of_populate_trip() error misses
this. Solve the OF node reference leak with scoped
for_each_child_of_node_scoped().
Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Make the imx_thermal driver use the .should_bind() thermal zone callback
to provide the thermal core with the information on whether or not to
bind the given cooling device to the given trip point in the given
thermal zone. If it returns 'true', the thermal core will bind the
cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
In the imx_thermal case, it only needs to return 'true' for the passive
trip point and it will match any cooling device passed to it, in
analogy with the old-style imx_bind() callback function.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the mlxsw core_thermal driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
It replaces the .bind() and .unbind() thermal zone callbacks (in 3
places) which assumed the same trip points ordering in the driver
and in the thermal core (that may not be true any more in the
future). The .bind() callbacks used loops over trip point indices
to call thermal_zone_bind_cooling_device() for the same cdev (once
it had been verified) and all of the trip points, but they passed
different 'upper' and 'lower' values to it for each trip.
To retain the original functionality, the .should_bind() callbacks
need to use the same 'upper' and 'lower' values that would be used
by the corresponding .bind() callbacks when they are about to return
'true'. To that end, the 'priv' field of each trip is set during the
thermal zone initialization to point to the corresponding 'state'
object containing the maximum and minimum cooling states of the
cooling device.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the acerhdf driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
The previously existing acerhdf_bind() function bound cooling devices
to thermal trip point 0 only, so the new callback needs to return 'true'
for trip point 0. However, it is straightforward to observe that trip
point 0 is an active trip point and the only other trip point in the
driver's thermal zone is a critical one, so it is sufficient to return
'true' from that callback if the type of the given trip point is
THERMAL_TRIP_ACTIVE.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Tested-by: Peter Kästle <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
thermal_unbind_cdev_from_trip()
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the ACPI thermal zone driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
allows the code to be simplified quite significantly while providing
the same functionality.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
acquire the thermal zone lock, the locking rules for their callers get
complicated. In particular, the thermal zone lock cannot be acquired
in any code path leading to one of these functions even though it might
be useful to do so.
To address this, remove the thermal zone locking from both these
functions, add lockdep assertions for the thermal zone lock to both
of them and make their callers acquire the thermal zone lock instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Two sysfs show/store functions for attributes representing thermal
instances, trip_point_show() and weight_store(), retrieve the thermal
zone pointer from the instance object at hand, but they may also get
it from their dev argument, which is more consistent with what the
other thermal sysfs functions do, so make them do so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Because the trip and cdev pointers are sufficient to identify a thermal
instance holding them unambiguously, drop the additional thermal zone
checks from two loops walking the list of thermal instances in a
thermal zone.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
It is not necessary to look up the thermal zone and the cooling device
in the respective global lists to check whether or not they are
registered. It is sufficient to check whether or not their respective
list nodes are empty for this purpose.
Use the above observation to simplify thermal_bind_cdev_to_trip(). In
addition, eliminate an unnecessary ternary operator from it.
Moreover, add lockdep_assert_held() for thermal_list_lock to it because
that lock must be held by its callers when it is running.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Fold bind_cdev() into __thermal_cooling_device_register() and bind_tz()
into thermal_zone_device_register_with_trips() to reduce code bloat and
make it somewhat easier to follow the code flow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Introduce a facility allowing the thermal core functionality to be
exercised in a controlled way in order to verify its behavior, without
affecting its regular users noticeably.
It is based on the idea of preparing thermal zone templates along with
their trip points by writing to files in debugfs. When ready, those
templates can be used for registering test thermal zones with the
thermal core.
The temperature of a test thermal zone created this way can be adjusted
via debugfs, which also triggers a __thermal_zone_device_update() call
for it. By manipulating the temperature of a test thermal zone, one can
check if the thermal core reacts to the changes of it as expected.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Fixed ordering of kcalloc() arguments ]
[ rjw: Fixed debugfs_create_dir() return value checks ]
[ rjw: Fixed two kerneldoc comments ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The debugfs_create_dir() return value is never NULL, it is either a
valid pointer or an error one.
Use IS_ERR() to check it.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Signed-off-by: Yang Ruibin <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In order to set the scene for the thresholds support which have to
manipulate the low and high temperature boundaries for the interrupt
support, we must pass the low and high values to the incoming
thresholds routine.
The variables are set from the thermal_zone_set_trips() where the
function loops the thermal trips to figure out the next and the
previous temperatures to set the interrupt to be triggered when they
are crossed.
These variables will be needed by the function in charge of handling
the thresholds in the incoming changes but they are local to the
aforementioned function thermal_zone_set_trips().
Move the low and high boundaries computation out of the function in
thermal_zone_device_update() so they are accessible from there.
The positive side effect is they are computed in the same loop as
handle_thermal_trip(), so we remove one loop.
Co-developed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
|
|
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: [email protected]
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
Pull smb client fixes from Steve French:
- fix for clang warning - additional null check
- fix for cached write with posix locks
- flexible structure fix
* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: smb2pdu.h: Use static_assert() to check struct sizes
smb3: fix lock breakage for cached writes
smb/client: avoid possible NULL dereference in cifs_free_subrequest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock
|
|
Pull xfs fixes from Chandan Babu:
- Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
- Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
xfs: revert AIL TASK_KILLABLE threshold
xfs: attr forks require attr, not attr2
|
|
Pull bcachefs fixes from Kent OverstreetL
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage
and number of extents per inode number. This lets us track
fragmentation, for implementing defragmentation later, and it also
counts disk usage per inode in all snapshots, which will be a useful
thing to expose to users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking
time blocked waiting on key cache flushing.
... and various assorted smaller fixes.
* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
bcachefs: fix incorrect i_state usage
bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
bcachefs: Fix forgetting to pass trans to fsck_err()
bcachefs: Increase size of cuckoo hash table on too many rehashes
bcachefs: bcachefs_metadata_version_disk_accounting_inum
bcachefs: Kill __bch2_accounting_mem_mod()
bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
bcachefs: Add a time_stat for blocked on key cache flush
bcachefs: Improve trans_blocked_journal_reclaim tracepoint
bcachefs: Add hysteresis to waiting on btree key cache flush
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
bcachefs: Convert for_each_btree_node() to lockrestart_do()
bcachefs: Add missing downgrade table entry
bcachefs: disk accounting: ignore unknown types
bcachefs: bch2_accounting_invalid() fixup
bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()
|
|
We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Pull memcg-v1 fix from Al Viro:
"memcg_write_event_control() oops fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
memcg_write_event_control(): fix a user-triggerable oops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
macro instead of the *_ERR() one in order to avoid writing -EFAULT to
the value register in case of a fault
- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
Prior to this fix, only the first element was initialised
- Move the KASAN random tag seed initialisation after the per-CPU areas
have been initialised (prng_state is __percpu)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix KASAN random tag seed initialization
arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
arm64: uaccess: correct thinko in __get_mem_asm()
|