aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-03-21ALSA: hda - Add PCI quirk for HP dv6-1110ax.Kunal Gangakhedkar1-0/+2
Adding this PCI quirk fixes the board config detection. This also fixes jack sensing by using "hp_detect=1" via properly detected board config. Signed-off-by: Kunal Gangakhedkar <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-03-19Linux 2.6.34-rc2Linus Torvalds1-1/+1
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds5-2/+50
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
2010-03-19Merge branch 'for-upstream' of ↵Linus Torvalds3-51/+69
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
2010-03-19Merge branch 'for-linus' of ↵Linus Torvalds7-13/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
2010-03-19Merge branch 'merge' of ↵Linus Torvalds8-40/+17
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
2010-03-19Merge branch 'zerolen' of ↵Linus Torvalds1-0/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds8-41/+53
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds11-38/+102
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds32-148/+335
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
2010-03-19Delete zero-length file drivers/mtd/maps/omap_nor.cJeff Garzik1-0/+0
The content was deleted in cc87edb173effdf74e680ee6d622a935ff0c1d6f, but the file remained as a zero-length file. Signed-off-by: Jeff Garzik <[email protected]>
2010-03-19Merge branch 'for-linus' of ↵Linus Torvalds67-0/+28066
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds8-121/+333
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry
2010-03-19USB: gadget/multi: cdc_do_config: remove redundant checkPeter Korsgaard1-2/+0
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: Peter Korsgaard <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: r8a66597-hcd: fix removed from an attached hubYoshihiro Shimoda1-5/+11
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: Markus Pietrek <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: xhci: Make endpoint interval debugging clearer.Sarah Sharp1-2/+7
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: Fix usb_fill_int_urb for SuperSpeed devicesMatthew Wilcox2-5/+14
USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox <[email protected]> Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: cp210x: Remove double usb_control_msg from cp210x_set_configMichael Brunner1-5/+0
This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: Michael Brunner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: Remove last bit of CONFIG_USB_BERRY_CHARGEChristoph Egger1-14/+0
One last bit was missed while removing the USB_BERRY_CHARGE config option in a8d4211f33a9573f7b1bdcfd9c9c48631d1515ee which gets dropped by this patch. Signed-off-by: Christoph Egger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: gadget: add gadget controller number for s3c-hsotg driverMaurus Cuelenaere1-0/+8
This prevents some drivers from complaining that no bcdDevice id was set. Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: ftdi_sio: Fix locking for change_speed() functionAlessio Igor Bogani1-2/+4
The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: g_mass_storage: fixed module name in KconfigMichal Nazarewicz1-1/+1
The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: Michal Nazarewicz <[email protected]> Cc: Kyungmin Park <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: gadget: f_mass_storage::fsg_bind(): fix error handlingPeter Korsgaard1-1/+0
Contrary to the comment in fsg_add, fsg_bind calls fsg_unbind on errors, which decreases refcount and frees the fsg_dev structure, causing trouble when fsg_add does the same. Fix it by simply leaving up cleanup to fsg_add(). Signed-off-by: Peter Korsgaard <[email protected]> Acked-by: Michal Nazarewicz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: g_mass_storage: fix section mismatch warningsMike Frysinger1-1/+1
The recent commit (0e530b45783f75) that moved usb_ep_autoconfig from the __devinit section to the __init section missed the mass storage device. Its fsg_bind() function uses the usb_ep_autoconfig() function from non __init context leading to: WARNING: drivers/usb/gadget/g_mass_storage.o(.text): Section mismatch in reference from the function _fsg_bind() to the function .init.text:_usb_ep_autoconfig() So move fsg_bind() into __init as well. Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: gadget: fix Blackfin builds after gadget cleansingMike Frysinger1-1/+1
The recent change to clean out dead gadget drivers (90f7976880bbbf99) missed the call to gadget_is_musbhsfc() behind CONFIG_BLACKFIN. This causes Blackfin gadget builds to fail since the function no longer exists anywhere. Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: goku_udc: remove potential null dereferenceDan Carpenter1-1/+1
"dev" is always null here. In the end it's only used to get the pci_name() of "pdev" which is redundant information and so I removed it. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is ↵spark1-0/+43
0xff Signed-off-by: spark <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: serial: Fix module name typo for qcaux Kconfig entry.Stefan Schmidt1-2/+2
The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: Stefan Schmidt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix deadlock between write and resumeOliver Neukum1-2/+2
The new runtime PM scheme allows resume() to have no locks. This fixes the deadlock. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix order in disconnect and fix lockingOliver Neukum1-8/+17
- as the callback can schedule work, URBs must be killed first - if the driver causes an autoresume, the caller must handle locking Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm:Fix loss of data due to autosuspendOliver Neukum1-1/+4
The guarding flag must be set and tested under spinlock and cleared before the URBs are resubmitted in resume. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix submission of URB after suspensionOliver Neukum1-2/+5
There's a window under which cdc-wdm may submit an URB to a device about to be suspended. This introduces a flag to prevent it. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix race between disconnect and debug messagesOliver Neukum1-5/+0
dev_dbg() and dev_err() cannot be used to report failures that may have been caused by a device's removal Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix race between autosuspend and reading from the deviceOliver Neukum1-4/+10
While an available response is read the device must not be autosuspended. This requires a flag dedicated to that purpose. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: cdc-wdm: Fix race between write and disconnectOliver Neukum1-39/+45
Unify mutexes to fix a race between write and disconnect and shift the test for disconnection to always report it. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: musb: core: declare mbase only where it's usedFelipe Balbi1-1/+7
... and avoid a compilation if we disable host side of musb. Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: musb: fix warnings in Blackfin regsMike Frysinger1-0/+9
The recent commit "usb: musb: Add context save and restore support" added some stubs for the Blackfin code so things would compile, but it also added a bunch of warnings due to missing return statements. Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: musb: abstract out ULPI_BUSCONTROL register reads/writesMike Frysinger2-3/+21
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. However, it has no ULPI support - so there are no registers at all. That means accesses to ULPI_BUSCONTROL have to be abstracted away like other MUSB registers. This fixes building for Blackfin parts again. Signed-off-by: Mike Frysinger <[email protected]> Acked-by: Anand Gadiyar <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb: musb: Fix compile error for omaps for musb_hdrcTony Lindgren1-2/+2
CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3. But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header. Otherwise we get the following for most omap3 defconfigs: drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while' Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19usb/gadget: fix compile error on r8a66597-udc.cGrant Likely1-0/+1
C file uses IS_ERR and PTR_ERR, but doesn't include <linux/err.h> Signed-off-by: Grant Likely <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: Fix documentation for avoid_reset_quirkOliver Neukum1-1/+1
The name used in the documentation doesn't match reality. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: option: add support for a new CMOTECH device to usb/serial/optionNathaniel McCallum1-0/+2
Signed-off-by: Nathaniel McCallum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: option: move hardcoded PID to a macro in usb/serial/optionNathaniel McCallum1-1/+2
Signed-off-by: Nathaniel McCallum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: option: fix incorrect manufacturer name in usb/serial/option: ↵Nathaniel McCallum1-2/+2
MAXON->CMOTECH Signed-off-by: Nathaniel McCallum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: serial: ftdi: add CONTEC vendor and product idDaniel Sangorrin2-0/+8
This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H [[email protected]: keep the VIDs sorted a bit] Signed-off-by: Daniel Sangorrin <[email protected]> Cc: Andreas Mohr <[email protected]> Cc: Radek Liboska <[email protected]> Cc: stable <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: xHCI: re-initialize cmd_completionAndiry Xu1-0/+1
When a signal interrupts a Configure Endpoint command, the cmd_completion used in xhci_configure_endpoint() is not re-initialized and the wait_for_completion_interruptible_timeout() will return failure. Initialize cmd_completion in xhci_configure_endpoint(). Signed-off-by: Andiry Xu <[email protected]> Signed-off-by: Sarah Sharp <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: xhci: rename driver to xhci_hcdAlex Chiang2-2/+2
Naming consistency with other USB HCDs. Signed-off-by: Alex Chiang <[email protected]> Cc: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: musb: fix build error introduced by isoc changeSonic Zhang1-1/+1
The recent commit "usb: musb: Fix for isochronous IN transfer" (f82a689fa) seems to have been against an older kernel version. It uses the old style naming of variables. Unfortunately, this breaks building for most MUSB users out there since "bDesiredMode" has been renamed to "desired_mode". Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Mike Frysinger <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Anand Gadiyar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: qcserial: add new device idsBernhard Rosenkraenzer1-0/+29
This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: cdc-acm: Fix stupid NULL pointer in resume()Oliver Neukum1-1/+1
Stupid logic bug passing a just nulled pointer Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.