aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-13GFS2: Take account of blockages when using reserved blocksSteven Whitehouse1-38/+28
The claim_reserved_blks() function was not taking account of the possibility of "blockages" while performing allocation. This can be caused by another node allocating something in the same extent which has been reserved locally. This patch tests for this condition and then skips the remainder of the reservation in this case. This is a relatively rare event, so that it should not affect the general performance improvement which the block reservations provide. The claim_reserved_blks() function also appears not to be able to deal with reservations which cross bitmap boundaries, but that can be dealt with in a future patch since we don't generate boundary crossing reservations currently. Signed-off-by: Steven Whitehouse <[email protected]> Reported-by: David Teigland <[email protected]> Cc: Bob Peterson <[email protected]>
2012-09-13GFS2: Fix missing allocation data for set/remove xattrSteven Whitehouse1-2/+6
These entry points were missed in the original patch to allocate this data structure. Signed-off-by: Steven Whitehouse <[email protected]>
2012-09-13GFS2: Make write size hinting code commonSteven Whitehouse1-4/+27
This collects up the write size hinting code which is used by the block reservation subsystem into a single function. At the same time this also corrects the rounding for this calculation. Signed-off-by: Steven Whitehouse <[email protected]>
2012-09-12Merge tag 'imx-clk-dt-lookup' of ↵Olof Johansson5-50/+291
git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt It replaces the clk_register_clkdev in imx6q clock driver with DT lookup. It depends on Mike's clk-3.7 branch. * tag 'imx-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: replace clk_register_clkdev with clock DT lookup Resolved context add/remove conflict in arch/arm/boot/dts/imx6q.dtsi
2012-09-12Merge tag 'imx-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson32-3788/+773
into next/dt - All imx53 board files are removed by the equal device tree support - The efikamx board files are removed to ease device tree migration - Remove dummy pinctrl state by setting up pinctrl in device tree * tag 'imx-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits) ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog' ARM: imx51: decouple device tree boot from board files ARM: imx51: build in pinctrl support ARM: dts: imx51-babbage: add pinctrl settings ARM: imx53: remove unneeded files and functions ARM: imx53: support device tree boot only ARM: imx53: decouple device tree boot from board files ARM: imx53: build in pinctrl support ARM: dts: imx53-smd: add pinctrl settings ARM: dts: imx53-evk: add pinctrl settings ARM: dts: imx53-ard: add pinctrl settings ARM: dts: imx53-qsb: add pinctrl settings ARM: imx6q: remove dummy pinctrl state ARM: dts: imx6q-sabresd: add pinctrl settings ARM: dts: imx6q-arm2: add pinctrl for uart and enet ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet ARM: dts: imx6q: sort iomuxc sub-nodes in name ARM: dts: imx6q: name iomuxc sub-nodes following pin function ARM: dts: imx6q: improve indentation for fsl,pins ARM: efikamx: remove Genesi Efika MX platform files from the tree ... Resolved trivial context conflict in arch/arm/boot/dts/imx51-babbage.dts
2012-09-12Merge tag 'mxs-clk-dt-lookup' of ↵Olof Johansson6-152/+242
git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt It replaces clk_register_clkdev in mxs clock driver with DT lookup. * tag 'mxs-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6: clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
2012-09-12Merge branch 'clk-3.7' of git://git.linaro.org/people/mturquette/linux into ↵Olof Johansson47-1547/+4360
next/dt * 'clk-3.7' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-09-12Merge tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson47-4096/+485
into next/dt - Remove all board files and make mach-mxs a DT-only platform - Some dts file formatting and style fixing - DTS update for additional boards and devices * tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits) ARM: dts: cfa10049: Add the 74HC595 gpio expanders ARM: dts: m28evk: Fix MMC WP pin being inverted ARM: dts: cfa10049: Add SSP3 to the 10049 board ARM: dts: mxs: Add missing address and size cells in SSP nodes ARM: mx28evk: Add I2C EEPROM support ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board ARM: dts: mxs: Add I2C1 muxing options for imx28 ARM: mx28evk: Add LRADC support ARM: mx28evk: Add SPI flash support ARM: mxs: Update DENX M28 machine and dts file ARM: mx28: Add USB PHY overcurrent pinmux ARM: mx28: Add SPI 2 pinmux into imx28.dtsi ARM: dts: mxs: Add pwm4 muxing options for imx28 ARM: dts: mxs: Add alternative I2C muxing options for imx28 ARM: olinuxino: Add gpio-led support ARM: mxs: Let mmc0 pin detect be generic ARM: mxs: Rename 'hog-gpios' ARM: mxs: remove iomux driver ARM: mxs: remove platform device codes ...
2012-09-12Merge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanupOlof Johansson232-1617/+2223
* 'clk' of git://github.com/hzhuang1/linux: ARM: mmp: remove unused definition in APBC and APMU ARM: mmp: move mmp2 clock definition to separated file arm: mmp: move pxa910 clock definition to separated file arm: mmp: move pxa168 clock definition to separated file arm: mmp: make private clock definition exclude from common clock + Linux 3.6-rc4
2012-09-12Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesOlof Johansson24-46/+253
ARM: i.MX: Fix SSI clock associations for i.MX25/i.MX35 * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: clk-imx35: Fix SSI clock registration ARM: clk-imx25: Fix SSI clock registration + Linux 3.6-rc5
2012-09-12Merge tag 'omap-devel-a2-for-3.7' of ↵Tony Lindgren8-4/+3569
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into devel-am33xx AM33xx hwmod data and miscellaneous clock and hwmod fixes. AM33xx should now boot on mainline after this is applied, according to Vaibhav. This second version includes trailing commas at the end of structure records at Tony's request. It also adds a OMAP_INTC_START macro expansion to each IRQ number to make the sparseirq conversion easier. Basic build, boot, and PM test transcripts are here: http://www.pwsan.com/omap/testlogs/am33xx_hwmod_clock_devel_3.7/20120912165952/
2012-09-13ahci: Add identifiers for ASM106x devicesAlan Cox1-1/+4
They don't always appear as AHCI class devices but instead as IDE class. Based on an initial patch by Hiroaki Nito Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804 Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2012-09-13ahci: Add alternate identifier for the 88SE9172Alan Cox1-0/+2
This can also appear as 0x9192. Reported in bugzilla and confirmed with the board documentation for these boards. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970 Signed-off-by: Alan Cox <[email protected]> Cc: The Stables <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2012-09-13ahci: Add JMicron 362 device IDsBen Hutchings1-0/+3
The JMicron JMB362 controller supports AHCI only, but some revisions use the IDE class code. These need to be matched by device ID. These additions have apparently been included by QNAP in their NAS devices using these controllers. References: http://bugs.debian.org/634180 Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2012-09-13Merge branch 'exynos-drm-fixes' of ↵Dave Airlie12-73/+30
git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes Inki Dae writes: - fix build warnings - minor code cleanup - remove non-standard format, DRM_FORMAT_NV12M - add dummy mmap for exynos dmabuf . dma_buf export needs this patch * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm: Drop the NV12M and YUV420M formats drm/exynos: remove DRM_FORMAT_NV12M from plane module drm/exynos: fix double call of drm_prime_(init/destroy)_file_private drm/exynos: add dummy support for dmabuf-mmap drm/exynos: Add missing braces around sizeof in exynos_mixer.c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c drm/exynos: Make g2d_pm_ops static drm/exynos: Add dependency for G2D in Kconfig drm/exynos: fixed page align bug. drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/exynos: Use devm_* functions in exynos_drm_g2d.c file drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file drm/exynos: Remove redundant check in exynos_drm_fimd.c file drm/exynos: Remove redundant check in exynos_hdmi.c file
2012-09-12Merge tag 'for_3.7-omap_device' of ↵Tony Lindgren2-5/+53
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-omap-device Updates for omap_device layer for v3.7. Allows omap_device layer to keep track of driver bound status in order to make more intelligent decisions about idling unused devices.
2012-09-12Merge tag 'omap-cleanup-b-for-3.7' of ↵Tony Lindgren40-276/+233
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into cleanup-makefile-sparse smatch and string-wrapping cleanups for the OMAP subarch code. These changes fix some of the more meaningful warnings that smatch returns for the OMAP subarch code, and unwraps strings that are wrapped at the 80-column boundary, to conform with the current practice. Basic build, boot, and PM logs are available here: http://www.pwsan.com/omap/testlogs/warnings_a_cleanup_3.7/20120912025927/
2012-09-12Merge tag 'omap-cleanup-a-for-3.7' of ↵Tony Lindgren1-64/+44
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into cleanup-makefile-sparse Clean up and standardize several parts of arch/arm/mach-omap2/Makefile. Beyond readability and diffstat improvements, the series should reduce the risk of conflicts during future cleanups by ensuring related lines are in the same section of the Makefile. Test results are available here: http://www.pwsan.com/omap/testlogs/makefile_cleanup_3.7/20120911191710/
2012-09-13drm: Drop the NV12M and YUV420M formatsVille Syrjälä1-5/+1
The NV12M/YUV420M formats are identical to the NV12/YUV420 formats. So just remove these duplicated format names. This might look like breaking the ABI, but the code has never actually accepted these formats, so nothing can be using them. Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: remove DRM_FORMAT_NV12M from plane moduleInki Dae1-1/+0
this patch removes DRM_FORMAT_NV12M from plane module because this format is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by mode_cmd->handles and mode_cmd->offsets fields internally. Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin.park <[email protected]>
2012-09-13drm/exynos: fix double call of drm_prime_(init/destroy)_file_privateMandeep Singh Baines1-2/+0
The double invocations are incorrect but seem to be safe so I don't think this will fix any bugs. Before: [ 7.639366] drm_prime_init_file ee3675d0 [ 7.639377] drm_prime_init_file ee3675d0 [ 7.639507] drm_prime_destroy_file ee3675d0 [ 7.639518] drm_prime_destroy_file ee3675d0 [ 7.639802] drm_prime_init_file ee372390 [ 7.639810] drm_prime_init_file ee372390 [ 8.473316] drm_prime_init_file ee356390 [ 8.473331] drm_prime_init_file ee356390 After: [ 6.363842] drm_prime_init_file edc2e5d0 [ 6.363994] drm_prime_destroy_file edc2e5d0 [ 6.364260] drm_prime_init_file edc2e750 [ 8.004837] drm_prime_init_file ee36ded0 Signed-off-by: Mandeep Singh Baines <[email protected]> Acked-by: Seung-Woo Kim <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: add dummy support for dmabuf-mmapTomasz Stanislawski1-0/+7
This patch adds a stub function for DMABUF mmap. This allows to export a DMABUF. Signed-off-by: Tomasz Stanislawski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_mixer.cSachin Kamat1-3/+3
Fixes the following checkpatch warnings: WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8) WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4) WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4) Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_hdmi.cSachin Kamat1-3/+3
Fixes the following checkpatch warnings: WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0]) WARNING: sizeof *res should be sizeof(*res) Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Make g2d_pm_ops staticSachin Kamat1-1/+1
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning: symbol 'g2d_pm_ops' was not declared. Should it be static? Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Add dependency for G2D in KconfigSachin Kamat1-1/+1
Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver is not selected. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2012-09-13drm/exynos: fixed page align bug.Inki Dae1-1/+1
do not align in page unit at dumb creation. the align is done by exynos_drm_gem_create() to be called commonly. Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]Thomas Meyer1-1/+1
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Use devm_* functions in exynos_drm_g2d.c fileSachin Kamat1-40/+10
devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c fileSachin Kamat1-2/+1
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c fileSachin Kamat1-3/+1
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Remove redundant check in exynos_drm_fimd.c fileSachin Kamat1-5/+0
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13drm/exynos: Remove redundant check in exynos_hdmi.c fileSachin Kamat1-5/+0
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2012-09-13vmwgfx: add dumb ioctl supportDave Airlie3-0/+88
Testing and works with the -modesetting driver, Reviewed-by: Jakob Bornecrantz <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2012-09-13gma500: Fix regression on Oaktrail devicesAlan Cox1-0/+2
The register map patches didn't set one value for the GMA600 which means the Fujitsu Q550 dies on boot with the GMA500 driver enabled. Add the map entry so we don't read from the device MMIO + 0 by mistake. Signed-off-by: Alan Cox <[email protected]> Cc: Horses <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2012-09-13digsig: add hash size comparision on signature verificationDmitry Kasatkin1-2/+4
When pkcs_1_v1_5_decode_emsa() returns without error and hash sizes do not match, hash comparision is not done and digsig_verify_rsa() returns no error. This is a bug and this patch fixes it. The bug was introduced in v3.3 by commit b35e286a640f ("lib/digsig: pkcs_1_v1_5_decode_emsa cleanup"). Cc: [email protected] Signed-off-by: Dmitry Kasatkin <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-09-13Merge branch 'drm-intel-fixes' of ↵Dave Airlie7-27/+43
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Nothing really major at all: - fixup edp setup sequence (Dave) - disable sdvo hotplug for real, this is a fixup for a messed-up regression fixer (Jani) - don't expose dysfunctional backlight driver (Jani) - properly init spinlock (only used by hsw/vlv code) from Alexander Shishkin" along with a couple of more fixes on top. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix up the IBX transcoder B check drm/i915: set the right gen3 flip_done mode also at resume drm/i915: initialize dpio_lock spin lock drm/i915: do not expose a dysfunctional backlight interface to userspace drm/i915: only enable sdvo hotplug irq if needed drm/i915/edp: get the panel delay before powering up
2012-09-12ARM: OMAP1: Move SoC specific headers from plat to mach for omap1Tony Lindgren7-12/+10
There's no need to have these in plat-omap any longer. Note that these could eventually be made local to mach-omap1 instead of being in mach. But to do that, at least various driver access using omap7xxx.h registers needs to be fixed first. Cc: [email protected] Cc: Grant Likely <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2Tony Lindgren15-111/+13
These can now be moved to be local headers in mach-omap2. Note that this patch removes arch/arm/plat-omap/devices.c as it will get removed anyways with Paul Walmsley's patch "ARM: OMAP: split OMAP1, OMAP2+ RNG device registration". Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren95-433/+391
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: [email protected] Cc: [email protected] Cc: Peter Ujfalusi <[email protected]> Cc: Jarkko Nikula <[email protected]> Cc: Liam Girdwood <[email protected]> Acked-by: Wim Van Sebroeck <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP: Remove unused old gpio-switch.hTony Lindgren1-54/+0
This is no longer used anywhere. Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP1: Move plat/irqs.h to mach/irqs.hTony Lindgren5-273/+268
This is now omap1 specific files. Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQTony Lindgren9-330/+10
Remove hardcoded IRQs in irqs.h and related files as these are no longer needed. Reviewed-by: Felipe Balbi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren54-238/+263
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12W1: OMAP HDQ1W: Remove dependencies to mach/hardware.hTony Lindgren1-2/+1
No need for hardcoded IRQ here. We can't include mach headers for ARM common zImage support. Cc: Evgeniy Polyakov <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12Input: omap-keypad: Remove dependencies to mach includesTony Lindgren2-121/+35
Remove support for omap2+ as it's no longer needed since it's using matrix-keypad. This way we can remove depency to plat and mach headers which is needed for ARM common zImage support. Also remove INT_KEYBOARD by using omap_kp->irq. Note that this patch depends on an earlier patch "ARM: OMAP: Move gpio.h to include/linux/platform_data". Cc: Dmitry Torokhov <[email protected]> Cc: [email protected] Acked-by: Sourav Poddar <[email protected]> Reviewed-by: Felipe Balbi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP: Move gpio.h to include/linux/platform_dataTony Lindgren28-31/+40
This way we can remove includes of plat/gpio.h which won't work with the single zImage support. Note that we also remove the cpu_class_is_omap2() check in gpio-omap.c as the drivers should not call it as we need to make it local to arch/arm/mach-omap2 for single zImage support. While at it, arrange the related includes in the standard way. Cc: Grant Likely <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Linus Walleij <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren21-59/+10
We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <[email protected]> Cc: Samuel Ortiz <[email protected]> Cc: Peter Ujfalusi <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+: Remove unused nand_irq for GPMCTony Lindgren2-2/+0
This is no longer needed and assumes a fixed IRQ number that won't work with SPARSE_IRQ. Acked-by: Afzal Mohammed <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2012-09-12ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.cTony Lindgren2-3/+2
Make INTCPS_NR_IRQS local for mach-omap2/irq.c Signed-off-by: Tony Lindgren <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.