aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-13bnx2x: correct advertisement of pause capabilitiesYaniv Rosner1-0/+6
This patch propagates users' requested flow-control into the link layer, which will later be used to advertise this flow-control for auto-negotiation (until now these values were ignored). Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13bnx2x: display the correct duplex valueYaniv Rosner1-4/+6
Prior to this fix, the driver reported the chip's active duplex state is always 'full', even if using half-duplex mode. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13bnx2x: prevent timeouts when using PFCYaniv Rosner1-3/+5
Prevent updating the xmac PFC configuration when using a link speed slower than 10G -the umac block is responsible for 1G or slower connections, therefore it is possible the xmac block is reset when connection is slower. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13bnx2x: fix stats copying logicYuval Mintz1-2/+5
FW needs the driver statistics for management. Current logic is broken in that the function that gathers the port statistics does not copy its own statistics to a place where the FW can use it. This patch causes every function that can pass statistics to the FW to do so. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13bnx2x: Avoid sending multiple statistics queriesDmitry Kravkov1-3/+5
During traffic when DCB is enabled, it is possible for multiple instances of statistics queries to be sent to the chip - this may cause the FW to assert. This patch prevents the sending of an additional instance of statistics query while the previous query hasn't completed. Signed-off-by: Dmitry Kravkov <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13drm/radeon: make 64bit fences more robust v3Christian König1-3/+5
Only increase the higher 32bits if we really detect a wrap around. v2: instead of increasing the higher 32bits just use the higher 32bits from the last emitted fence. v3: also use last emitted fence value as upper limit. The intention of this patch is to make fences as robust as they where before introducing 64bit fences. This is necessary because on older systems it looks like the fence value gets corrupted on initialization. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=51344 Should also fix: https://bugs.freedesktop.org/show_bug.cgi?id=54129 https://bugs.freedesktop.org/show_bug.cgi?id=54662 https://bugzilla.redhat.com/show_bug.cgi?id=846505 https://bugzilla.redhat.com/show_bug.cgi?id=845639 3.5 needs a separate patch due to changes in the fence code. Will send that out separately. Signed-off-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2012-09-13drm/radeon: rework pll selection (v3)Alex Deucher1-34/+129
For DP we can use the same PPLL for all active DP encoders. Take advantage of that to prevent cases where we may end up sharing a PPLL between DP and non-DP which won't work. Also clean up the code a bit. v2: - fix missing pll_id assignment in crtc init v3: - fix DP PPLL check - document functions - break in main encoder search loop after matching. no need to keep checking additional encoders. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54471 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2012-09-13net: qmi_wwan: call subdriver with control intf onlyBjørn Mork1-3/+4
This fixes a hang on suspend due to calling wdm_suspend on the unregistered data interface. The hang should have been a NULL pointer reference had it not been for a logic error in the cdc_wdm code. commit 230718bd net: qmi_wwan: bind to both control and data interface changed qmi_wwan to use cdc_wdm as a subdriver for devices with a two-interface QMI/wwan function. The commit failed to update qmi_wwan_suspend and qmi_wwan_resume, which were written to handle either a single combined interface function, or no subdriver at all. The result was that we called into the subdriver both when the control interface was suspended and when the data interface was suspended. Calling the subdriver suspend function with an unregistered interface is not supported and will make the subdriver bug out. Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13net_sched: gred: actually perform idling in WRED modeDavid Ward1-11/+15
gred_dequeue() and gred_drop() do not seem to get called when the queue is empty, meaning that we never start idling while in WRED mode. And since qidlestart is not stored by gred_store_wred_set(), we would never stop idling while in WRED mode if we ever started. This messes up the average queue size calculation that influences packet marking/dropping behavior. Now, we start WRED mode idling as we are removing the last packet from the queue. Also we now actually stop WRED mode idling when we are enqueuing a packet. Cc: Bruce Osler <[email protected]> Signed-off-by: David Ward <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13net_sched: gred: fix qave reporting via netlinkDavid Ward1-1/+4
q->vars.qavg is a Wlog scaled value, but q->backlog is not. In order to pass q->vars.qavg as the backlog value, we need to un-scale it. Additionally, the qave value returned via netlink should not be Wlog scaled, so we need to un-scale the result of red_calc_qavg(). This caused artificially high values for "Average Queue" to be shown by 'tc -s -d qdisc', but did not affect the actual operation of GRED. Signed-off-by: David Ward <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13net_sched: gred: eliminate redundant DP prio comparisonsDavid Ward1-3/+2
Each pair of DPs only needs to be compared once when searching for a non-unique prio value. Signed-off-by: David Ward <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13net_sched: gred: correct comment about qavg calculation in RIO modeDavid Ward1-1/+1
Signed-off-by: David Ward <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13mISDN: Fix wrong usage of flush_work_sync while holding locksKarsten Keil7-11/+15
It is a bad idea to hold a spinlock and call flush_work_sync. Move the workqueue cleanup outside the spinlock and use cancel_work_sync, on closing the channel this seems to be the more correct function. Remove the never used and constant return value of mISDN_freebchannel. Signed-off-by: Karsten Keil <[email protected]> Cc: <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-09-13ARM: msm: Remove non-DT targets from 8960Stephen Boyd6-223/+0
Remove the non-DT targets supported by 8960. This makes 8960 a device tree only target. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Add DT support for 8960Stephen Boyd5-0/+93
Add basic support to boot 8960 with device tree. For now just support a basic machine with a uart device. Signed-off-by: Stephen Boyd <[email protected]> [[email protected]: Remove leading zeros] Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Move io mapping prototypes to common.hStephen Boyd9-25/+12
Consolidate the handful of iomapping functions into common.h so that board files don't need to include mach/msm_iomap.h if they don't need static virtual mapping addresses. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Rename board-msm8x60 to signify its DT only statusStephen Boyd2-1/+1
Rename this file to signify that this board is only supported via devicetree. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Make 8660 a DT only targetStephen Boyd4-140/+6
We don't plan to support anything besides devicetree on these targets so remove all other machine support. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Move 8660 to DT timerStephen Boyd2-2/+19
Add the timer entry and point the machine descriptor to the device tree based msm timer. Signed-off-by: Stephen Boyd <[email protected]> [[email protected]: Remove leading zeros] Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Add DT support to msm_timerStephen Boyd3-0/+126
Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <[email protected]> [[email protected]: Remove leading zeros] Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Allow timer.c to compile on multiple targetsStephen Boyd9-60/+125
The timer code relies on #defines from mach/iomap.h, cpu_is_*() checks, and a global irq #define. All this makes this file impossible to compile in a mult-target build. Therefore, make a sys_timer struct for each SoC so that machine descriptors can reference the correct timer. Then go through and replace all the defines with raw values that are passed to a common initialization function. This paves the way to adding DT support to this code as well as allows us to compile this file on multiple targets at the same time. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Don't touch GIC registers outside of GIC codeStephen Boyd4-26/+2
The MSM code has some antiquated register writes to set up the PPIs to be edge triggered. Now that we have the percpu irq interface we don't need this code so let's remove it and update the percpu irq user (msm_timer) to set the irq type. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Remove uncompiled board-msm7x27Stephen Boyd2-172/+1
This board file has never been compiled. Let's just remove it along with the one Kconfig reference to it in io.c. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Remove unused acpuclock-arm11Stephen Boyd4-568/+1
This is dead code that isn't initialized or setup (although it is compiled). Remove it and the data structures it references. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: dma: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-2/+1
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller4-44/+38
Pablo Neira Ayuso say: ==================== The following patchset contains four updates for your net tree, they are: * Fix crash on timewait sockets, since the TCP early demux was added, in nfnetlink_log, from Eric Dumazet. * Fix broken syslog log-level for xt_LOG and ebt_log since printk format was converted from <.> to a 2 bytes pattern using ASCII SOH, from Joe Perches. * Two security fixes for the TCP connection tracking targeting off-path attacks, from Jozsef Kadlecsik. The problem was discovered by Jan Wrobel and it is documented in: http://mixedbit.org/reflection_scan/reflection_scan.pdf. ==================== Signed-off-by: David S. Miller <[email protected]>
2012-09-13ARM: msm: Fix sparse warnings due to incorrect typeStephen Boyd1-1/+1
arch/arm/mach-msm/timer.c:153:3: warning: incorrect type in initializer (different address spaces) arch/arm/mach-msm/timer.c:153:3: expected void const [noderef] <asn:3>*__vpp_verify arch/arm/mach-msm/timer.c:153:3: got struct clock_event_device [noderef] <asn:3>**<noident> arch/arm/mach-msm/timer.c:153:38: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:153:38: expected struct clock_event_device [noderef] <asn:3>*<noident> arch/arm/mach-msm/timer.c:153:38: got struct clock_event_device *evt arch/arm/mach-msm/timer.c:191:22: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:191:22: expected struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt arch/arm/mach-msm/timer.c:191:22: got struct clock_event_device *[noderef] <asn:3>*<noident> arch/arm/mach-msm/timer.c:196:4: warning: incorrect type in initializer (different address spaces) arch/arm/mach-msm/timer.c:196:4: expected void const [noderef] <asn:3>*__vpp_verify arch/arm/mach-msm/timer.c:196:4: got struct clock_event_device [noderef] <asn:3>**<noident> arch/arm/mach-msm/timer.c:196:39: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:196:39: expected struct clock_event_device [noderef] <asn:3>*<noident> arch/arm/mach-msm/timer.c:196:39: got struct clock_event_device *ce arch/arm/mach-msm/timer.c:198:24: warning: incorrect type in argument 4 (different address spaces) arch/arm/mach-msm/timer.c:198:24: expected void [noderef] <asn:3>*percpu_dev_id arch/arm/mach-msm/timer.c:198:24: got struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Add msm8660-surf.dts to Makefile.bootStephen Boyd1-0/+2
Add this entry to the Makefile so that we can build the dtb automatically with 'make dtbs'. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Add handle_irq handler for 8660 DT machineStephen Boyd1-0/+1
Commit 041f777 (ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER, 2011-09-06) forgot to add the .handle_irq for the DT machine record. Add it so we get interrupts instead of panics on DT enabled bootloaders. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Fix early debug uart mapping on some memory configsStephen Boyd2-2/+2
The uart mapping runs into the space allocated for lowmem on some 8960 boards when we have more than 512Mb of memory. We were getting lucky before and our mapping wasn't part of DDR. Move the mapping up into the vmalloc area which will always be outside of the lowmem mapping regardless of how much lowmem actually exists. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Remove unused idle.cStephen Boyd2-50/+1
Forcing arm_pm_idle to be msm_idle() doesn't make sense in configurations that don't have CONFIG_MSM7X00A_IDLE=y (i.e. any targets that aren't 7x00a). Furthermore, that config doesn't even exist, so this entire file is dead code. Just remove it so we can use the default idle support on MSM. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: clock-pcom: Mark functions staticStephen Boyd1-9/+9
These functions are only used within clock-pcom.c, therefore mark them as static. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: Remove msm_hw_reset_hookStephen Boyd5-29/+0
This reset hook is never assigned and is dead code. Remove it so we have one less header file in the mach directory. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: io: Change the default static iomappings to be sharedRohit Vaswani1-9/+13
With 3.4 kernel the static iomappings can be shared with the ioremap mappings. If ioremap is called with an address for which a static mapping already exists, then that mapping should be used instead of creating a new one. However, the MT_DEVICE_NONSHARED flag prevents this. Hence, get rid of this flag. Some targets (7X00) that require the static iomappings to be NONSHARED use the MSM_DEVICE_TYPE and MSM_CHIP_DEVICE_TYPE macros. Signed-off-by: Rohit Vaswani <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: msm: io: Remove 7x30 iomap region from 7x00Rohit Vaswani1-3/+0
This is redundant code. Signed-off-by: Rohit Vaswani <[email protected]> Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: tegra20: add CPU hotplug supportJoseph Lo5-0/+96
Hotplug function put CPU in offline or online mode at runtime. When the CPU been put into offline, it was been clock gated. The offline CPU can be power gated, when the remaining CPU goes into LP2. Based on the worked by: Colin Cross <[email protected]> Gary King <[email protected]> Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ARM: tegra30: add CPU hotplug supportJoseph Lo5-86/+159
Hotplug function put CPUs in offline or online state at runtime. When the CPU been put in the offline state, it was been clock and power gated. Except primary CPU other CPUs can be hotplugged. Based on the work by: Scott Williams <[email protected]> Colin Cross <[email protected]> Gary King <[email protected]> Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ARM: tegra: clean up the common assembly macros into sleep.hJoseph Lo3-37/+58
There are some common macros for Tegra low-level assembly code. Clean up them into one header file and move the definitions that will be re-used into it as well. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_opsJoseph Lo1-24/+5
Replacing the code that directly access to CAR registers with tegra_cpu_car_ops. This ops hides CPU CAR access inside and provides control interface for it. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ARM: tegra: introduce tegra_cpu_car_ops structuresJoseph Lo6-0/+238
The tegra_cpu_car_ops provide the interface for CPU to control it's clock gating and reset status. The other drivers should use this for CPU control. And should not directly access CAR registers to control CPU. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ARM: msm: Remove call to missing FPGA init on 8660David Brown1-5/+0
A previous patch[1] added code to initialize an FPGA register on the 8660 "SURF" development platform. Since this development platform is not widely available, and there is now a more available device "the Dragonboard" based on the same core SOC, this change was dropped. However, the DT code kept a lingering call to this FPGA init function. Remove it. [1] https://lkml.org/lkml/2011/8/12/357 Signed-off-by: David Brown <[email protected]>
2012-09-13ARM: Tegra: Add smp_twd clock for Tegra20Prashant Gaikwad3-0/+50
Clockevent's frequency is changed upon cpufreq change notification. It fetches local timer's rate to update the clockevent frequency. This patch adds local timer clock for Tegra20. Signed-off-by: Prashant Gaikwad <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-09-13ALSA: hda - Yet another position_fix quirk for ASUS machinesTakashi Iwai1-0/+1
ASUS X53S also suffers from the same issue as in commit c302d6133. Use POS_FIX_POSBUF for this hardware, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47461 Signed-off-by: Takashi Iwai <[email protected]>
2012-09-13ARM: SoC: convert Tegra to SMP operationsMarc Zyngier9-19/+31
Convert Tegra to use struct smp_operations to provide its SMP and CPU hotplug operations. Tested on Harmony. Signed-off-by: Marc Zyngier <[email protected]> Acked-by: Stephen Warren <[email protected]> Acked-by: Olof Johansson <[email protected]> Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-09-13ARM: SoC: convert OMAP4 to SMP operationsMarc Zyngier6-19/+24
Convert OMAP4 to use struct smp_operations to provide its SMP and CPU hotplug operations. Tested on both Panda and IGEPv2 (MULTI_OMAP kernel) Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Santosh Shilimkar <[email protected]> Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-09-13ARM: SoC: convert VExpress/RealView to SMP operationsMarc Zyngier11-40/+59
Convert both Realview and VExpress to use struct smp_operations to provide their SMP and CPU hotplug operation. Signed-off-by: Marc Zyngier <[email protected]> Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-09-13Merge tag 'sound-3.6' of ↵Linus Torvalds6-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few small / trivial regression fixes at this time." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: ice1724: Use linear scale for AK4396 volume control. ALSA: hda_intel: add position_fix quirk for Asus K53E ALSA: compress_core: fix open flags test in snd_compr_open() ALSA: hda - Fix Oops at codec reset/reconfig ALSA: usb-audio: Fix bogus error messages for delay accounting ALSA: hda - Fix missing Master volume for STAC9200/925x
2012-09-13ARM: SoC: add per-platform SMP operationsMarc Zyngier4-2/+104
This adds a 'struct smp_operations' to abstract the CPU initialization and hot plugging functions on SMP systems, which otherwise conflict in a multiplatform kernel. This also helps shmobile and potentially others that have more than one method to do these. To allow the kernel to continue building, the platform hooks are defined as weak symbols which are overrided by the platform code. Once all platforms are converted, the "weak" attribute will be removed and the function made static. Unlike the original version from Marc, this new version from Arnd does not use a generalized abstraction for per-soc data structures but only tries to solve the problem for the SMP operations. This way, we can collapse the previous four data structures into a single struct, which is less systematic but also easier to follow as a causal reader. Signed-off-by: Marc Zyngier <[email protected]> Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-09-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds13-32/+98
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Olof Johansson: - A set of OMAP fixes, about half of them PM/clock related, the rest scattered over the platform code but all small and targeted to real bugs. - Two small i.MX fixes for SSI device clock setup. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: clk-imx35: Fix SSI clock registration ARM: clk-imx25: Fix SSI clock registration ARM: OMAP4: Fix array size for irq_target_cpu ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block ARM: OMAP: hwmod code: Disable module when hwmod enable fails ARM: OMAP3: hwmod data: fix iva2 reset info ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention ARM: OMAP: Config fix for omap3-touchbook board ARM: OMAP: sram: skip the first 16K on OMAP3 HS ARM: OMAP: sram: fix OMAP4 errata handling ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER
2012-09-13Merge tag 'upstream-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull additional AHCI PCI IDs from Jeff Garzik. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: Add identifiers for ASM106x devices ahci: Add alternate identifier for the 88SE9172 ahci: Add JMicron 362 device IDs
Powered by cgit, Gruvboxed by Blaster4385.